SRSaranarayanan Ramachandran

Saranarayanan Ramachandran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Saranarayanan Ramachandran has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Stress effects on grain boundary grooving in polycrystalline interconnects: Insights from phase-field simulations

    by Shuibao Liang, Han Jiang, Zhihong Zhong, Saranarayanan Ramachandran

    We develop a multi-phase-field framework to investigate stress-modulated grain boundary grooving in polycrystalline metal interconnects. Larché–Cahn stress-diffusion coupling is incorporated into the surface-diffusion-driven morphological evolution equations, enabling concurrent simulation of free-surface grooving and grain boundary migration. The stress-free limit reproduces the classical Mullins t1/4 kinetics, validating the model against the analytical benchmark. Applied tensile stress markedly accelerates groove deepening relative to the stress-free baseline, while compression retards it; the groove-root geometry amplifies the far-field hydrostatic stress by nearly a factor of two, progressively intensifying the stress-diffusion coupling as grooves sharpen. Elastic mismatch between neighboring grains introduces an additional mechanism whereby groove roots migrate laterally under applied loading, thereby coupling surface grooving to stress-driven grain boundary motion. Extending to three-dimensional polycrystalline interconnects, we identify triple junctions as preferential failure sites where geometric constraint concentrates both diffusive flux and hydrostatic stress. High grain boundary mobility promotes concurrent coarsening and localized slit formation, accelerating degradation, while low mobility produces slower, less severe damage. These findings establish groove-root stress amplification and junction-controlled localization as the dominant mechanisms linking mechanical loading to morphological degradation in metal interconnects.

  • Physically Based Simulation of Electromigration-Induced Hillock and Void Evolution in Cu Interconnects with Grain Morphology Considerations

    by Han Jiang, Shuibao Liang, Yaohua Xu, Saranarayanan Ramachandran

    Electromigration-induced hillocks and voids in Cu interconnects pose increasingly significant reliability challenges to microelectronic devices, as device scaling and current density continue to rise in advanced integrated circuits. These defects can cause critical short-circuit and open-circuit failures. However, the quantitative mechanisms governing these failure modes remain insufficiently understood, limiting the precise prediction of defect morphology and growth dynamics. In this work, we develop a physically based phase field model to investigate the formation and evolution of hillocks and voids in Cu interconnects under electric current stressing, incorporating the influence of grain morphology. Our results show that hillocks tend to form and grow on the anode side, with directional mass migration inducing voids on the cathode side, leading to increased electrical resistance and potential signal degradation. Interconnects with finer polycrystalline structures exhibit more rapid hillock and void growth, due to the increased number of grain boundaries that enhance atomic diffusion pathways. Hydrostatic stress not only flattens void morphology but also accelerates the growth of both hillocks and voids. The stress-driven diffusion flux flows into the hillock regions adjacent to the anode, promoting the formation of taller hillocks. The proposed model qualitatively reproduces key features observed in experimental studies, offering microstructure-aware insights into electromigration-induced failure mechanisms and providing a foundation for predictive reliability analysis and design optimization of Cu interconnects.

  • Grain Morphology Effects on Void Formation and Electromigration-Induced Failure in Copper Interconnects

    by Han Jiang, Susu Li, Zhenchao Li, Leyin Zhang, Yaohua Xu, Saranarayanan Ramachandran, Shuibao Liang

    Electromigration, driven by increasing current densities in scaled integrated circuits, poses a serious reliability challenge in semiconductor manufacturing, often culminating in void formation and interconnect failure. As interconnect dimensions shrink to the nanoscale, the influence of microstructural features and grain morphology on interconnect reliability and degradation mechanisms becomes increasingly significant. In this work, we develop a physics-based phase field model to investigate the void formation and evolution in copper interconnects subjected to electromigration. Our simulations closely align with experimental trends, revealing that voids predominantly emerge at or initiate from the cathode end, with their evolution strongly influenced by grain morphology. In the surface diffusion-limited scenario (SDLS), grain boundaries significantly promote void formation, resulting in increased void sizes. Under the grain boundary diffusion-limited scenario (GBDLS), void nucleation in bamboo structure (BS) and polycrystalline structure (PS) interconnects occurs relatively early, often initiating near the interface between the copper and the capping layer. The voltage distribution exhibits noticeable inhomogeneity, with high electric field intensities localized at grain boundaries and void surfaces. The electromigration-induced mass flux predominantly flows from the bottom right toward the left. Additionally, an increased number of copper grains leads to larger voids, with a more pronounced effect in the SDLS. Furthermore, electromigration-induced void growth progressively reduces electrical conductivity. These findings elucidate the complex interplay between grain morphology, electromigration-driven void formation, and electrical performance degradation in copper interconnects, and are anticipated to offer valuable insights into microstructure-dependent failure mechanisms while supporting process optimization in advanced interconnect fabrication.


  • Influence of Phase Coarsening on Inhomogeneous Deformation and Fracture Behavior in Sn–Bi Solder Interconnects

    by Shuibao Liang, Han Jiang, Zhihong Zhong, Yaohua Xu, Saranarayanan Ramachandran

    With the increasing demand for emerging technologies like artificial intelligence and big data, the significance of advanced chip integration and packaging has grown considerably. Sn–Bi based solders have gained significant attention and have been explored for multi-layer stacked packaging, but they are prone to significant coarsening during service, and the effects of grain and phase anisotropy become more pronounced. These factors impact the performance and reliability of Sn–Bi solder interconnects. This study develops a numerical model to investigate microstructure coarsening in Sn–Bi solder bump interconnects, focusing on its effect on mechanical behavior and crack propagation. The simulated coarsening behavior aligns with experimental observations. Results show that, under shear loading, the Sn-rich phase experiences higher stress initially, while the Bi-rich phase bears greater stress later, leading to stress concentrations mainly in the Bi-rich phase or at the phase interfaces. Thermal aging exacerbates the uneven distribution of stress. Plastic strain is greater in the Sn-rich phase, and cracks primarily initiate and propagate in the Bi-rich phase. Coarsening accelerates crack growth, affecting the stress-strain response. This study provides insights into the effects of phase coarsening and inhomogeneous deformation in Sn–Bi solder interconnects, which may contribute to interconnect design and reliability analysis in three-dimensional packaging.


  • Study on Thermomigration-Induced Void Formation in Advanced Copper Interconnects

    by Shuibao Liang, Han Jiang, Rongxin Zhou, Yaohua Xu, Saranarayanan Ramachandran

    With the miniaturization of microelectronic components and the increase in chip power densities, thermomigration driven by complex thermal gradients has become a critical reliability concern for microelectronic interconnects. In this work, we developed a phase field model to investigate the formation and evolution of voids in copper interconnects due to thermomigration. Simulations effectively captured the experimental findings, revealing that voids tend to emerge near the hot end, prominently influenced by grain morphology. In the surface diffusion-limited scenario (SDLS), grain boundaries notably facilitated void formation, increasing void size. In the grain boundary diffusion-limited scenario (GBDLS), void nucleation in bamboo structure (BS), polycrystalline structure (PS) copper interconnects tended to initiate relatively early and occurred near the interface between the copper and the capping layer. Moreover, the thermal distribution showed uneven patterns, with high gradients at grain boundaries and void surfaces. The thermomigration mass flux predominantly flowed from the hotter left side towards the colder right side. Increasing the number of copper grains resulted in larger voids, with a more pronounced effect in the SDLS. Furthermore, the thermomigraiton-induced void led to a decrease in thermal conductivity over time. This study clarified the complex relationship between grain morphology, void formation due to thermomigration, and the degradation of thermal properties in copper interconnects, enhancing the understanding of performance degradation and failure mechanisms.


  • Investigation of Electro-Thermo-Mechanical Degradation and Crack Propagation of Wire Bonds in Power Modules Using Integrated Phase Field Modeling and Finite Element Analysis

    by Han Jiang, Shuibao Liang, Yaohua Xu, Saranarayanan Ramachandran

    Interfacial fatigue degradation and crack formation of wire bonds are one of the serious issues related to packaging in power modules that affect the reliability of power electronics. This work presents a new approach based on a combination of phase field modeling and finite element analysis to study the electro-thermo-mechanical behavior, the interface degradation and crack propagation processes of wire bonded interconnects in insulated-gate bipolar transistor (IGBT) power modules. The strain energy density obtained from the macroscale electro-thermo-mechanical analysis is transferred to the meso-scale phase field modeling to study the interface fatigue and crack propagation, considering the effect of wire grain morphology. The temperature and stress distribution characteristics of a typical IGBT power module with Al wire bonds under power cycling are investigated. Stress concentration at the interconnect interface caused by thermal strains between wire and chip is examined. The crack length increases with increasing cycle number. The presence of Al grain boundaries is found to have a significant impact on crack propagation, due to grain boundary energy and weakening effects. The developed model could provide new insights for predicting the lifetime and crack growth of power modules, and offer a pathway for the reliability optimization of wire bonds.


  • Investigation of Effects of Porosity and Coarsening on Thermal and Mechanical Properties of Sintered Silver Die Attachment

    by Han Jiang, Shuibao Liang, Yaohua Xu, Saranarayanan Ramachandran

    Sintering of nano silver particles has been proven to be an effective technique for achieving the high-performance reliable interconnects required for microelectronics packaging of wide bandgap semiconductors. However, the porous structure of sintered silver induces the porosity and morphology dependencies of the properties of the interconnects. Capturing the dynamic microstructure evolution and coarsening of sintered silver interconnects during service is still challenging for experimental studies. This study develops a phase field model to simulate the microstructure of porous sintered silver and its dynamic evolution under thermal aging. Then, the porous structure of sintered silver is imported into the finite element model to analyze the changes in the thermal and mechanical properties of the sintered silver. It is found that as the porosity increases, the thermal conductivity and yield strength gradually decrease, which is in good agreement with the experimental studies. With increasing aging time, except for the sintered specimen with a porosity of 60%, the thermal conductivity of the other porous sintered silver increases slightly; the elastic properties mainly depend on the porosity of the sintered samples, and the yield strength decreases during aging due to the coarsening of pores.


  • Harnessing friction stir back extrusion process to fabricate microtubes from as-cast Mg–4Zn–0.7Zr-1.6RE magnesium alloy

    by A K Lakshminarayanan, Saranarayanan Ramachandran, M Bakkiyaraj, B Rajabharathi

    Friction Stir Back Extrusion (FSBE) is a novel manufacturing process widely used to produce lightweight tubes with superior mechanical properties. This work aims to establish the optimum process parameters of the FSBE method to fabricate flaw-free small-scale magnesium microtubes from as-cast Mg-Zn-Zr-Re magnesium alloy. FSBE experimental trials in the light of the Taguchi optimization were attempted to optimize and develop relationships that can link the crucial process parameters, namely tool rotational rate, feed rate, and billet preheating temperature of the FSBE process on the microstructural alterations, microhardness, and corrosion resistance characteristics. The results suggest that the FSBE parameters, especially the tool feed rate, have a crucial influence on the performance attributes of microtubes. Additionally, it is evident that both the tool rotation rate and feed rate significantly affect the formation of dynamically recrystallized fraction (DRX) of the stir zone. The stir zone has achieved a higher density of fine recrystallized grains than the base metal region, which subsequently led to a spike in the microhardness values of this zone. This study has determined that the FSBE technique significantly enhanced the corrosion degradation resistance of microtubes as compared with cast material. The optimal FSBE parameters such as tool rotational rate of 1440 rpm, feed rate of 20 mm min −1 , and billet preheating temperature of 100 °C have offered microtubes with the highest microhardness and lowest corrosion degradation rate.


  • Open Access

    Application of Imaging Techniques to Determine the Post-Yield Behaviour of the Heterogeneous Microstructure of Friction Stir Welds

    by S. Ramachandran, A. K. Lakshminarayanan, P. A. S. Reed, J. M. Dulieu-Barton

    Background: Friction Stir Welding (FSW) causes intense plastic deformation and consequent thermomechanical interactions resulting in a localised heterogeneous microstructure. To understand the weld mechanical behaviour, it is necessary to identify each microstructural sub-region in the weld. Objective: Determine the relationship between the local microstructure and mechanical behaviour of the different microstructural regions in a FSW. Methods: Scanning electron microscopy (SEM) identified the microstructural sub-regions of an FSW joint. A novel High-Resolution Digital Image Correlation (HR-DIC) methodology enabled the determination of full-field strain response to provide the mechanical behaviour of the FSW sub-regions. X-ray computed tomography (CT) identified the geometry of the FSW and material composition. Results: The grain morphology in the FSW varied in the stir zone with a fine grain structure in the weld nugget and larger grains in the thermomechanical affected zone (TMAZ); the grains were larger in the retreating side (RS) compared to the advancing side (AS). Tungsten deposits were found in the weld nugget and attributed to tool wear. The mechanical properties of the weld subregions showed that the material in the stir zone had a greater yield strength than the base material and the RS of the FSW was much more ductile than the weld nugget and the AS side. The tungsten distributions in the stir zone correlated with the local mechanical behaviour. Conclusions: A novel methodology is developed that combines microstructural observations with HR-DIC enabling, for the first time, the FSW sub-region mechanical behaviour, to be related to the local grain morphology and inclusions caused by tool wear.