Pierpaolo Minelli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Pierpaolo Minelli has a total of 104 co-authors. Here are the top co-authors by number of shared publications:
- Francesco Taccogna
Istituto per la Scienza e Tecnologia dei Plasmi, CNR, Bari, ITALY
19 shared publications - Savino Longo
Dipartimento di Chimica Università degli Studi di Bari Aldo Moro Bari Italy
15 shared publications - Domenico Bruno
Istituto per la Scienza e Tecnologia dei Plasmi (ISTP)-CNR, via G. Amendola, 122/D
11 shared publications M. Capitelli
9 shared publicationsD. Pagano
4 shared publications- Fabrizio Esposito
Istituto per la Scienza e Tecnologia dei Plasmi, Consiglio Nazionale delle Ricerche, Sede Territoriale di Bari, Via Amendola 122/D, 70126 Bari, Italy
4 shared publications
Latest Publications
- Open Access
- 16 January 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (2)
Benchmark for two-dimensional large scale coherent structures in partially magnetized E×B plasmas - Community collaboration & lessons learned
Low-temperature plasmas are essential to both fundamental scientific research and critical industrial applications. As in many areas of science, numerical simulations have become a vital tool for uncovering new physical phenomena and guiding technological development. Code benchmarking remains crucial for verifying implementations and evaluating performance. This work continues the Landmark benchmark initiative, a series specifically designed to support the verification of low-temperature plasma codes. In this study, seventeen simulation codes from a collaborative community of nineteen international institutions modeled a partially magnetized E×B Penning discharge. The emergence of large scale coherent structures, or rotating plasma spokes, endows this configuration with an enormous range of time scales, making it particularly challenging to simulate. The codes showed excellent agreement on the rotation frequency of the spoke as well as key plasma properties, including time-averaged ion density, plasma potential, and electron temperature profiles. Achieving this level of agreement came with challenges, and we share lessons learned on how to conduct future benchmarking campaigns. Comparing code implementations, computational hardware, and simulation runtimes also revealed interesting trends, which are summarized with the aim of guiding future plasma simulation software development.
- 16 January 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (2)
Open AccessBenchmark for two-dimensional large scale coherent structures in partially magnetized E×B plasmas - Community collaboration & lessons learned
Low-temperature plasmas are essential to both fundamental scientific research and critical industrial applications. As in many areas of science, numerical simulations have become a vital tool for uncovering new physical phenomena and guiding technological development. Code benchmarking remains crucial for verifying implementations and evaluating performance. This work continues the Landmark benchmark initiative, a series specifically designed to support the verification of low-temperature plasma codes. In this study, seventeen simulation codes from a collaborative community of nineteen international institutions modeled a partially magnetized E×B Penning discharge. The emergence of large scale coherent structures, or rotating plasma spokes, endows this configuration with an enormous range of time scales, making it particularly challenging to simulate. The codes showed excellent agreement on the rotation frequency of the spoke as well as key plasma properties, including time-averaged ion density, plasma potential, and electron temperature profiles. Achieving this level of agreement came with challenges, and we share lessons learned on how to conduct future benchmarking campaigns. Comparing code implementations, computational hardware, and simulation runtimes also revealed interesting trends, which are summarized with the aim of guiding future plasma simulation software development.
- Open Access
- 17 January 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 66 (2) , 025015
Kinetic modeling of the plasma–wall interaction in the DTT divertor region
A precise estimate of the local energy fluxes and erosion profiles at the divertor monoblocks of a fusion reactor requires a kinetic modeling of the plasma–wall interaction. Here, a two-dimensional Particle-in-Cell code is used to quantify the particle and energy fluxes and ion impact distribution functions across the divertor monoblocks of the ‘Divertor Tokamak Test’ reactor, focusing on poloidal gaps with toroidal bevelling. The considered critical locations are close to the strike points at both Inner and Outer Vertical Targets. A worst-case scenario for particle fluxes corresponding to attached plasma conditions and featuring a single-null magnetic configuration is assumed. The separate and cumulative effects of including electron wall emission and ions/electrons collisions with a background neutral gas (recycled at the walls) are also assessed. It is found that a non-negligible energy flux affects the shadowed regions of the monoblocks, especially when accounting for collisions, and that the ion impact distribution functions are strongly influenced by the considered kinetic effects, with important implications on the induced sputtering yield.
- 17 January 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 66 (2) , 025015
Open AccessKinetic modeling of the plasma–wall interaction in the DTT divertor region
A precise estimate of the local energy fluxes and erosion profiles at the divertor monoblocks of a fusion reactor requires a kinetic modeling of the plasma–wall interaction. Here, a two-dimensional Particle-in-Cell code is used to quantify the particle and energy fluxes and ion impact distribution functions across the divertor monoblocks of the ‘Divertor Tokamak Test’ reactor, focusing on poloidal gaps with toroidal bevelling. The considered critical locations are close to the strike points at both Inner and Outer Vertical Targets. A worst-case scenario for particle fluxes corresponding to attached plasma conditions and featuring a single-null magnetic configuration is assumed. The separate and cumulative effects of including electron wall emission and ions/electrons collisions with a background neutral gas (recycled at the walls) are also assessed. It is found that a non-negligible energy flux affects the shadowed regions of the monoblocks, especially when accounting for collisions, and that the ion impact distribution functions are strongly influenced by the considered kinetic effects, with important implications on the induced sputtering yield.
- 25 April 2019
- Published by Springer Nature in Rendiconti Lincei. Scienze Fisiche e Naturali
- Vol. 30 (2) , 277-285
Negative ion beam source as a complex system: identification of main processes and key interdependence
- 25 April 2019
- Published by Springer Nature in Rendiconti Lincei. Scienze Fisiche e Naturali
- Vol. 30 (2) , 277-285
Negative ion beam source as a complex system: identification of main processes and key interdependence
- 1 June 2018
- Published by AIP Publishing in Physics of Plasmas
- Vol. 25 (6) , 061208
Three-dimensional particle-in-cell model of Hall thruster: The discharge channel
There are still many missing elements to complete the physical picture at the basis of the Hall thruster functioning. The origin of the anomalous electron cross-field transport often ascribed to azimuthal electron E × B drift instability remains decoupled from self-consistent ion axial acceleration and radial boundary conditions, at the same time. This study represents the first attempt to correlate the different mechanisms contributing to the electron transport by means of a fully kinetic three-dimensional Particle-in-Cell model. A geometrical scaling scheme has been used to make the simulation possible. This scheme irremediably changes what are some salient characteristics of the discharge, such as the wall interaction and the axial component of the electric field. For this reason, a critical assessment of the effects of reducing dimensions has been addressed. The present paper deals with the physics of discharge channel. Results confirm the occurrence of E × B drift instability along the azimuthal direction. The modulation is almost standing wave: it moves back and forth travelling only a short distance before being axially convected away. In addition, the dielectric floating potential nature of the lateral walls gives to the azimuthal modulation an important radial component creating an oblique pattern in the radial-azimuthal plane. As a consequence, the azimuthal electric field presents a double alternating structure: two phase-opposing waves are present in the first and second half of the radial extension between the two lateral walls. Finally, the effect of secondary electron emission from walls is not sufficient to guarantee the right electron current to neutralize the ion beam, but rather it works as an auxiliary mechanism (together with ion heating and azimuthal rotation) to saturate the electron drift instability leading to smaller amplitude oscillations.
- 1 June 2018
- Published by AIP Publishing in Physics of Plasmas
- Vol. 25 (6) , 061208
Three-dimensional particle-in-cell model of Hall thruster: The discharge channel
There are still many missing elements to complete the physical picture at the basis of the Hall thruster functioning. The origin of the anomalous electron cross-field transport often ascribed to azimuthal electron E × B drift instability remains decoupled from self-consistent ion axial acceleration and radial boundary conditions, at the same time. This study represents the first attempt to correlate the different mechanisms contributing to the electron transport by means of a fully kinetic three-dimensional Particle-in-Cell model. A geometrical scaling scheme has been used to make the simulation possible. This scheme irremediably changes what are some salient characteristics of the discharge, such as the wall interaction and the axial component of the electric field. For this reason, a critical assessment of the effects of reducing dimensions has been addressed. The present paper deals with the physics of discharge channel. Results confirm the occurrence of E × B drift instability along the azimuthal direction. The modulation is almost standing wave: it moves back and forth travelling only a short distance before being axially convected away. In addition, the dielectric floating potential nature of the lateral walls gives to the azimuthal modulation an important radial component creating an oblique pattern in the radial-azimuthal plane. As a consequence, the azimuthal electric field presents a double alternating structure: two phase-opposing waves are present in the first and second half of the radial extension between the two lateral walls. Finally, the effect of secondary electron emission from walls is not sufficient to guarantee the right electron current to neutralize the ion beam, but rather it works as an auxiliary mechanism (together with ion heating and azimuthal rotation) to saturate the electron drift instability leading to smaller amplitude oscillations.
- 14 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 46 (2) , 219-224
How to Build PIC-MCC Models for Hall Microthrusters
This paper gives instructions on how to build a 3-D particle-based model of a Hall microthruster. Due to nonequilibrium character induced by low electron thermalization and isotropization rates, presence of different microinstabilities and strong plasma-surface interaction, a multidimensional and kinetic description is necessary. The different modules characterizing the particle-in-cell/Monte Carlo collision cycle are described presenting the last algorithms developed. The model is applied to the study of an SPT20 configuration. Results confirm the importance of a 3-D structure of the discharge with self-organized azimuthal structures. Important deviations from Maxwellian behavior have been detected.
- 14 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 46 (2) , 219-224
How to Build PIC-MCC Models for Hall Microthrusters
This paper gives instructions on how to build a 3-D particle-based model of a Hall microthruster. Due to nonequilibrium character induced by low electron thermalization and isotropization rates, presence of different microinstabilities and strong plasma-surface interaction, a multidimensional and kinetic description is necessary. The different modules characterizing the particle-in-cell/Monte Carlo collision cycle are described presenting the last algorithms developed. The model is applied to the study of an SPT20 configuration. Results confirm the importance of a 3-D structure of the discharge with self-organized azimuthal structures. Important deviations from Maxwellian behavior have been detected.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1869, 030040
Particle model of a cylindrical inductively coupled ion source
In spite of the wide use of RF sources, a complete understanding of the mechanisms regulating the RF-coupling of the plasma is still lacking so self-consistent simulations of the involved physics are highly desirable. For this reason we are developing a 2.5D fully kinetic Particle-In-Cell Monte-Carlo-Collision (PIC-MCC) model of a cylindrical ICP-RF source, keeping the time step of the simulation small enough to resolve the plasma frequency scale. The grid cell dimension is now about seven times larger than the average Debye length, because of the large computational demand of the code. It will be scaled down in the next phase of the development of the code. The filling gas is Xenon, in order to minimize the time lost by the MCC collision module in the first stage of development of the code. The results presented here are preliminary, with the code already showing a good robustness. The final goal will be the modeling of the NIO1 (Negative Ion Optimization phase 1) source, operating in Padua at Consorzio RFX.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1869, 030040
Particle model of a cylindrical inductively coupled ion source
In spite of the wide use of RF sources, a complete understanding of the mechanisms regulating the RF-coupling of the plasma is still lacking so self-consistent simulations of the involved physics are highly desirable. For this reason we are developing a 2.5D fully kinetic Particle-In-Cell Monte-Carlo-Collision (PIC-MCC) model of a cylindrical ICP-RF source, keeping the time step of the simulation small enough to resolve the plasma frequency scale. The grid cell dimension is now about seven times larger than the average Debye length, because of the large computational demand of the code. It will be scaled down in the next phase of the development of the code. The filling gas is Xenon, in order to minimize the time lost by the MCC collision module in the first stage of development of the code. The results presented here are preliminary, with the code already showing a good robustness. The final goal will be the modeling of the NIO1 (Negative Ion Optimization phase 1) source, operating in Padua at Consorzio RFX.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1869, 050006
Code-to-code benchmark tests for 3D simulation models dedicated to the extraction region in negative ion sources
The development of the kinetic particle model for the extraction region in negative hydrogen ion sources is indispensable and helpful to clarify the H− beam extraction physics. Recently, various 3D kinetic particle codes have been developed to study the extraction mechanism. Direct comparison between each other has not yet been done. Therefore, we have carried out a code-to-code benchmark activity to validate our codes. In the present study, the progress in this benchmark activity is summarized. At present, the reasonable agreement with the result by each code have been obtained using realistic plasma parameters at least for the following items; (1) Potential profile in the case of the vacuum condition (2) Temporal evolution of extracted current densities and profiles of electric potential in the case of the plasma consisting of only electrons and positive ions.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1869, 050006
Code-to-code benchmark tests for 3D simulation models dedicated to the extraction region in negative ion sources
The development of the kinetic particle model for the extraction region in negative hydrogen ion sources is indispensable and helpful to clarify the H− beam extraction physics. Recently, various 3D kinetic particle codes have been developed to study the extraction mechanism. Direct comparison between each other has not yet been done. Therefore, we have carried out a code-to-code benchmark activity to validate our codes. In the present study, the progress in this benchmark activity is summarized. At present, the reasonable agreement with the result by each code have been obtained using realistic plasma parameters at least for the following items; (1) Potential profile in the case of the vacuum condition (2) Temporal evolution of extracted current densities and profiles of electric potential in the case of the plasma consisting of only electrons and positive ions.
- Open Access
- 1 January 2017
- Published by IOP Publishing in New Journal of Physics
- Vol. 19 (1) , 015012
PIC modeling of negative ion sources for fusion
- 1 January 2017
- Published by IOP Publishing in New Journal of Physics
- Vol. 19 (1) , 015012
Open AccessPIC modeling of negative ion sources for fusion
- 14 July 2016
- Published by Springer Nature in Springer Proceedings in Physics
- p. 145-152
RF Negative Ion Sources and Polarized Ion Sources
- 14 July 2016
- Published by Springer Nature in Springer Proceedings in Physics
- p. 145-152
RF Negative Ion Sources and Polarized Ion Sources
- 31 December 2015
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (2) , 02B145
The characterization and optimization of NIO1 ion source extraction aperture using a 3D particle-in-cell code
The geometry of a single aperture in the extraction grid plays a relevant role for the optimization of negative ion transport and extraction probability in a hybrid negative ion source. For this reason, a three-dimensional particle-in-cell/Monte Carlo collision model of the extraction region around the single aperture including part of the source and part of the acceleration (up to the extraction grid (EG) middle) regions has been developed for the new aperture design prepared for negative ion optimization 1 source. Results have shown that the dimension of the flat and chamfered parts and the slope of the latter in front of the source region maximize the product of production rate and extraction probability (allowing the best EG field penetration) of surface-produced negative ions. The negative ion density in the plane yz has been reported.
- 31 December 2015
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (2) , 02B145
The characterization and optimization of NIO1 ion source extraction aperture using a 3D particle-in-cell code
The geometry of a single aperture in the extraction grid plays a relevant role for the optimization of negative ion transport and extraction probability in a hybrid negative ion source. For this reason, a three-dimensional particle-in-cell/Monte Carlo collision model of the extraction region around the single aperture including part of the source and part of the acceleration (up to the extraction grid (EG) middle) regions has been developed for the new aperture design prepared for negative ion optimization 1 source. Results have shown that the dimension of the flat and chamfered parts and the slope of the latter in front of the source region maximize the product of production rate and extraction probability (allowing the best EG field penetration) of surface-produced negative ions. The negative ion density in the plane yz has been reported.