Vicente Baena Lecuyer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vicente Baena Lecuyer has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Ana Cinta Oria
Department of Electronic Engineering of the University of Seville, Spain
13 shared publications - Antonio Torralba
Universidad de Sevilla
11 shared publications - Joaquin Granado
Electronic Engineering Department, Universidad de Sevilla (E.T.S. de Ingeniería), C/Camino de los Descubrimientos s/n, 41092 Sevilla, Spain
9 shared publications - Dario Perez-Calderon
Departamento de Ingenieria Electronica, Escuela Superior de Ingenieros, University of Seville, Sevilla, Spain
6 shared publications - Jorge Chavez
Departamento de Ingeniería Electrónica Universidad de Sevilla, Sevilla, Spain
6 shared publications - Miguel Angel Aguirre
Department of Electronic Engineering, Universidad de Sevilla, Spain
6 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9541612
Low-Complexity Phase-Based DToF Measurement for Battery-Powered Ultrasonic Water Meters
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75, 9541612
Open AccessLow-Complexity Phase-Based DToF Measurement for Battery-Powered Ultrasonic Water Meters
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5775-5779
Coherent Combining Loss Induced by True-Time-Delay Quantization in OFDM Phased Arrays
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5775-5779
Open AccessCoherent Combining Loss Induced by True-Time-Delay Quantization in OFDM Phased Arrays
- 13 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (1) , 39-48
Computationally Efficient Sphere Decoding Algorithm Based on Artificial Neural Networks for Long-Horizon FCS-MPC
Successful application of finite control set model predictive control strategies with long prediction horizon depends on the careful design of the optimization algorithm. The conventional method involves transforming the problem to an equivalent box-constrained integer least-squares formulation that can be solved with branch-and-bound techniques, such as the sphere decoding algorithm (SDA). In this work, it is proposed to define an artificial neural network (ANN) to replace the SDA, avoiding its inherent computational variability. Similarly to practical applications of the SDA, the ANN finds an approximate solution of the underlying optimization problem. In contrast, the main benefit of the proposed approach is that it can be implemented in a low-cost microprocessing platform, greatly improving the performance in terms of resources in comparison with other advanced techniques proposed in the literature.
- 13 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (1) , 39-48
Computationally Efficient Sphere Decoding Algorithm Based on Artificial Neural Networks for Long-Horizon FCS-MPC
Successful application of finite control set model predictive control strategies with long prediction horizon depends on the careful design of the optimization algorithm. The conventional method involves transforming the problem to an equivalent box-constrained integer least-squares formulation that can be solved with branch-and-bound techniques, such as the sphere decoding algorithm (SDA). In this work, it is proposed to define an artificial neural network (ANN) to replace the SDA, avoiding its inherent computational variability. Similarly to practical applications of the SDA, the ANN finds an approximate solution of the underlying optimization problem. In contrast, the main benefit of the proposed approach is that it can be implemented in a low-cost microprocessing platform, greatly improving the performance in terms of resources in comparison with other advanced techniques proposed in the literature.
- 11 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (7) , 7896-7906
Parallel Sphere Decoding Algorithm for Long-Prediction-Horizon FCS-MPC
Researchinterest in finite-control-set model-predictive control (FCS-MPC) for power conversion devices has grown in recent years. Particularly, long-prediction-horizon FCS-MPC provides promising results in recent research works. However, its practical implementation is not generally straightforward due to its inherently large computational burden. To overcome this obstacle, the problem can be formulated as a least-squares integer program. A sphere decoding algorithm (SDA) is a branch-and-bound algorithm proposed in previous works as an efficient approach to solve this problem. In these works, the SDA is formulated as an iterative process, where simultaneous search is not possible. A parallel and fully scalable SDA design is proposed in this article. The design is implemented in the field-programmable gate array of a modern field-programmable system-on-chip platform. Thanks to the proposed parallelization, the required execution time is greatly reduced. Experimental results prove the feasibility and performance improvements of the proposed implementation.
- 11 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (7) , 7896-7906
Parallel Sphere Decoding Algorithm for Long-Prediction-Horizon FCS-MPC
Researchinterest in finite-control-set model-predictive control (FCS-MPC) for power conversion devices has grown in recent years. Particularly, long-prediction-horizon FCS-MPC provides promising results in recent research works. However, its practical implementation is not generally straightforward due to its inherently large computational burden. To overcome this obstacle, the problem can be formulated as a least-squares integer program. A sphere decoding algorithm (SDA) is a branch-and-bound algorithm proposed in previous works as an efficient approach to solve this problem. In these works, the SDA is formulated as an iterative process, where simultaneous search is not possible. A parallel and fully scalable SDA design is proposed in this article. The design is implemented in the field-programmable gate array of a modern field-programmable system-on-chip platform. Thanks to the proposed parallelization, the required execution time is greatly reduced. Experimental results prove the feasibility and performance improvements of the proposed implementation.
- Open Access
Prediction of Satellite Shadowing in Smart Cities with Application to IoT
The combination of satellite direct reception and terrestrial 5G infrastructure is essential to guarantee coverage in satellite based-Internet of Things, mainly in smart cities where buildings can cause high power losses. In this paper, we propose an accurate and fast graphical method for predicting the satellite coverage in urban areas and SatCom on-the-move scenarios. The aim is to provide information that could be useful in the IoT network planning process, e.g., in the decision of how many terrestrial repeaters are really needed and where they should be placed. Experiments show that the shadowed areas predicted by the method correspond almost perfectly with experimental data measured from an Eutelsat satellite in the urban area of Barcelona.
Open AccessPrediction of Satellite Shadowing in Smart Cities with Application to IoT
The combination of satellite direct reception and terrestrial 5G infrastructure is essential to guarantee coverage in satellite based-Internet of Things, mainly in smart cities where buildings can cause high power losses. In this paper, we propose an accurate and fast graphical method for predicting the satellite coverage in urban areas and SatCom on-the-move scenarios. The aim is to provide information that could be useful in the IoT network planning process, e.g., in the decision of how many terrestrial repeaters are really needed and where they should be placed. Experiments show that the shadowed areas predicted by the method correspond almost perfectly with experimental data measured from an Eutelsat satellite in the urban area of Barcelona.
- 11 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 20 (11) , 4245-4250
Subsampling OFDM-Based Ultrasonic Data Communication Through Metallic Channels for Monitoring of Cargo Containers
- 11 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 20 (11) , 4245-4250
Subsampling OFDM-Based Ultrasonic Data Communication Through Metallic Channels for Monitoring of Cargo Containers
- 28 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 62 (3) , 505-511
Diversity Technique for OFDM Systems: Enhanced Time-Frequency Multiplexing (eTFM)
Nowadays, orthogonal frequency division multiplexing (OFDM) systems are widely used for many different purposes, such as wireless broadcasting systems as digital video broadcasting-second generation terrestrial (DVB-T2), mobile networks as fourth generation long term evolution, or even specifications as the already approved by the DVB project, DVB-next generation for handhelds. The two first standards use state-of-the-art technologies that have currently made them two of the most cutting edge communication systems. In this paper, we propose a new diversity technique applicable to OFDM systems that improves the overall system performance. This technique will be evaluated in the frame of the DVB-T2 standard and compared to one of its most innovative diversity technologies: the rotated constellations (RC). Applying the proposed technique a performance improvement up to about 1 dB can be obtained when compared to the same system using RC. However, as RC, the proposed technique introduces a complexity increase in the detecting process.
- 28 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 62 (3) , 505-511
Diversity Technique for OFDM Systems: Enhanced Time-Frequency Multiplexing (eTFM)
Nowadays, orthogonal frequency division multiplexing (OFDM) systems are widely used for many different purposes, such as wireless broadcasting systems as digital video broadcasting-second generation terrestrial (DVB-T2), mobile networks as fourth generation long term evolution, or even specifications as the already approved by the DVB project, DVB-next generation for handhelds. The two first standards use state-of-the-art technologies that have currently made them two of the most cutting edge communication systems. In this paper, we propose a new diversity technique applicable to OFDM systems that improves the overall system performance. This technique will be evaluated in the frame of the DVB-T2 standard and compared to one of its most innovative diversity technologies: the rotated constellations (RC). Applying the proposed technique a performance improvement up to about 1 dB can be obtained when compared to the same system using RC. However, as RC, the proposed technique introduces a complexity increase in the detecting process.
- 11 February 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (10) , 1971-1978
Cubic Metric Reduction for DCO-OFDM Visible Light Communication Systems
Visible light communication (VLC) systems with a direct current-biased optical orthogonal frequency division multiplexing (DCO-OFDM) architecture suffers from the well-known problem of high peak-to-average power ratio (PAPR). A DCOOFDM signal at the input of the light emitting diode (LED) with high PAPR can experience clipping due to its limited dynamic-range. This causes distortion and degradation of the signal quality, forcing a large power back-off, and so leading to an inefficient use of the LEDs. In order to resolve this problem, we propose to apply a power derating reduction technique at the VLC transmitter based on a modification of the active constellation extension (ACE) method with two important changes: a better predictor of the power derating than the PAPR, the cubic metric (CM), and a more effective clipping stage. With the proposed method, we achieve a significant CM reduction as large as 7.1 dB, which contributes to a noticeable gain in the input power back-off of 2.5 dB or an important reduction of signal distortion, and a greater illumination to communication efficiency (ICE), higher than 30%.
- 11 February 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (10) , 1971-1978
Cubic Metric Reduction for DCO-OFDM Visible Light Communication Systems
Visible light communication (VLC) systems with a direct current-biased optical orthogonal frequency division multiplexing (DCO-OFDM) architecture suffers from the well-known problem of high peak-to-average power ratio (PAPR). A DCOOFDM signal at the input of the light emitting diode (LED) with high PAPR can experience clipping due to its limited dynamic-range. This causes distortion and degradation of the signal quality, forcing a large power back-off, and so leading to an inefficient use of the LEDs. In order to resolve this problem, we propose to apply a power derating reduction technique at the VLC transmitter based on a modification of the active constellation extension (ACE) method with two important changes: a better predictor of the power derating than the PAPR, the cubic metric (CM), and a more effective clipping stage. With the proposed method, we achieve a significant CM reduction as large as 7.1 dB, which contributes to a noticeable gain in the input power back-off of 2.5 dB or an important reduction of signal distortion, and a greater illumination to communication efficiency (ICE), higher than 30%.
- 12 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 61 (1) , 84-90
Simplified Detection for DVB-NGH MIMO Decoders
Nowadays, communication systems need to satisfy very demanding constraints in order to cope with users new necessities. One of the most promising techniques to improve the system capacity is multiple input multiple output (MIMO). However, the use of MIMO implies a huge complexity increase in the detection process. In this paper, a method to reduce the aforementioned complexity is presented. Although the proposed method is analyzed for digital video broadcasting next generation for handhelds, its implementation is useful for any MIMO system that requires the computation of log likelihood ratios (LLRs), used by the low density parity check codes. The presented technique consists of applying a simplification when calculating the Euclidean distances needed by the LLRs. The simplification avoids almost all the multiplications, very area demanding when translated into hardware, and presents a performance loss under 0.1 dB.
- 12 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Broadcasting
- Vol. 61 (1) , 84-90
Simplified Detection for DVB-NGH MIMO Decoders
Nowadays, communication systems need to satisfy very demanding constraints in order to cope with users new necessities. One of the most promising techniques to improve the system capacity is multiple input multiple output (MIMO). However, the use of MIMO implies a huge complexity increase in the detection process. In this paper, a method to reduce the aforementioned complexity is presented. Although the proposed method is analyzed for digital video broadcasting next generation for handhelds, its implementation is useful for any MIMO system that requires the computation of log likelihood ratios (LLRs), used by the low density parity check codes. The presented technique consists of applying a simplification when calculating the Euclidean distances needed by the LLRs. The simplification avoids almost all the multiplications, very area demanding when translated into hardware, and presents a performance loss under 0.1 dB.
- 1 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 61 (6) , 3244-3249
On the Structural Robustness Assessment of Wireless Communication Systems for Intra-Satellite Applications
When a system has been designed to be robust against other phenomena different than ionizing radiation, it is possible that the robustness introduced by design in its structure may also make it tolerate some radiation effects. The present work explores how to exploit the self-correcting features that transmitter-receiver systems have for correcting channel-induced errors, in order to optimally design a radiation-tolerant wireless communications system for intra-satellite communication. A wireless transceiver is a good example of how to proceed to design a system that has some inherent robustness by itself, so fewer protections are needed when hardening it against radiation. The assessment is made using a fault injection technique, where the figure assessed is the transmission Frame Error Rate (FER) instead of the typical cycle-by-cycle comparison with a theoretical, or golden, bit sequence. This assessment allows the designer to optimally protect the transceiver, reducing mitigation area overhead with respect to full and selective Triple Modular Redundancy (TMR) schemas. The technique has been applied to the design of a wireless transmitter, reducing the area overhead required to harden it against Single Event Upsets (SEU), compared with traditional full and selective TMR schemes.
- 1 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 61 (6) , 3244-3249
On the Structural Robustness Assessment of Wireless Communication Systems for Intra-Satellite Applications
When a system has been designed to be robust against other phenomena different than ionizing radiation, it is possible that the robustness introduced by design in its structure may also make it tolerate some radiation effects. The present work explores how to exploit the self-correcting features that transmitter-receiver systems have for correcting channel-induced errors, in order to optimally design a radiation-tolerant wireless communications system for intra-satellite communication. A wireless transceiver is a good example of how to proceed to design a system that has some inherent robustness by itself, so fewer protections are needed when hardening it against radiation. The assessment is made using a fault injection technique, where the figure assessed is the transmission Frame Error Rate (FER) instead of the typical cycle-by-cycle comparison with a theoretical, or golden, bit sequence. This assessment allows the designer to optimally protect the transceiver, reducing mitigation area overhead with respect to full and selective Triple Modular Redundancy (TMR) schemas. The technique has been applied to the design of a wireless transmitter, reducing the area overhead required to harden it against Single Event Upsets (SEU), compared with traditional full and selective TMR schemes.