Maksym Figat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maksym Figat has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Cezary Zieliński
Warsaw University of Technology
15 shared publications - Maciej Stefańczyk
Warsaw University of Technology Institute of Control and Computation Engineering Warsaw Poland
5 shared publications - Wojciech Szynkiewicz
Warsaw University of Technology
5 shared publications - Tomasz Kornuta
IBM Research AI Almaden Research Center San Jose USA
4 shared publications - Wojciech Dudek
Warsaw University of Technology, Institute of Control and Computation Engineering, Warsaw, Poland
4 shared publications - Włodzimierz Kasprzak
Warsaw University of Technology
4 shared publications
Latest Publications
- Open Access
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 24618-24635
Simplification of Robotic System Model Analysis by Petri Net Meta-Model Property Transfer
This paper presents a simplification of robotic system model analysis due to the transfer of Robotic System Hierarchical Petri Net (RSHPN) meta-model properties onto the model of a designed system. Key contributions include: 1) analysis of RSHPN meta-model properties; 2) decomposition of RSHPN analysis into analysis of individual Petri nets, thus the reduction of state space explosion; and 3) transfer of RSHPN meta-model properties onto the produced models, hence elimination of the need for full re-analysis of the RSHPN model when creating new robotic systems. Only task-dependent parts of the model need to be analysed. This approach streamlines the analysis thus reducing the design time. Moreover, it produces a specification which is a solid foundation for the implementation of the system. The obtained results highlight the potential of Petri nets as a valuable formal framework for analysing robotic system properties.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 24618-24635
Open AccessSimplification of Robotic System Model Analysis by Petri Net Meta-Model Property Transfer
This paper presents a simplification of robotic system model analysis due to the transfer of Robotic System Hierarchical Petri Net (RSHPN) meta-model properties onto the model of a designed system. Key contributions include: 1) analysis of RSHPN meta-model properties; 2) decomposition of RSHPN analysis into analysis of individual Petri nets, thus the reduction of state space explosion; and 3) transfer of RSHPN meta-model properties onto the produced models, hence elimination of the need for full re-analysis of the RSHPN model when creating new robotic systems. Only task-dependent parts of the model need to be analysed. This approach streamlines the analysis thus reducing the design time. Moreover, it produces a specification which is a solid foundation for the implementation of the system. The obtained results highlight the potential of Petri nets as a valuable formal framework for analysing robotic system properties.
- Open Access
Ontology-Driven Robotic Specification Synthesis
This paper addresses robotic system engineering for safety- and mission-critical applications by bridging the gap between high-level objectives and formal, executable specifications. The proposed method, Robotic System Task to Model Transformation Methodology (RSTM2) is an ontology-driven, hierarchical approach using stochastic timed Petri nets with resources, enabling Monte Carlo simulations at mission, system, and subsystem levels. A hypothetical case study demonstrates how the RSTM2 method supports architectural trades, resource allocation, and performance analysis under uncertainty. Ontological concepts further enable explainable AI-based assistants, facilitating fully autonomous specification synthesis. The methodology offers particular benefits to complex multi-robot systems, such as the NASA CADRE mission, representing decentralized, resource-aware, and adaptive autonomous systems of the future.
Open AccessOntology-Driven Robotic Specification Synthesis
This paper addresses robotic system engineering for safety- and mission-critical applications by bridging the gap between high-level objectives and formal, executable specifications. The proposed method, Robotic System Task to Model Transformation Methodology (RSTM2) is an ontology-driven, hierarchical approach using stochastic timed Petri nets with resources, enabling Monte Carlo simulations at mission, system, and subsystem levels. A hypothetical case study demonstrates how the RSTM2 method supports architectural trades, resource allocation, and performance analysis under uncertainty. Ontological concepts further enable explainable AI-based assistants, facilitating fully autonomous specification synthesis. The methodology offers particular benefits to complex multi-robot systems, such as the NASA CADRE mission, representing decentralized, resource-aware, and adaptive autonomous systems of the future.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- p. 1-8
A Methodology for Robotic Specification Synthesis
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- p. 1-8
Open AccessA Methodology for Robotic Specification Synthesis
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- p. 1-8
Resource-Aware Petri Nets for Robotic Architecture Evaluation
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- p. 1-8
Open AccessResource-Aware Petri Nets for Robotic Architecture Evaluation
- 30 July 2024
- Published by Springer Nature
- p. 483-505
Agent-Based Autonomous Robotic System Using Deep Reinforcement and Transfer Learning
- 30 July 2024
- Published by Springer Nature
- p. 483-505
Agent-Based Autonomous Robotic System Using Deep Reinforcement and Transfer Learning
- Open Access
- 16 February 2023
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 111 (9) , 8383-8395
Predictive tracking of an object by a pan–tilt camera of a robot
Moving-object tracking using a pan–tilt camera setup is quite a well-known task in robotics. However, the presented research addresses specific properties of the tracked object and introduces novel features to the pan–tilt camera control strategy. Pan–tilt camera control does not operate in an isolated environment. It is a part of the visual servoing system with specific goals. The system has to fulfill certain purposes, which affect its configuration and functionality. The pan–tilt system aims at keeping the visually tracked object within the middle of the image. At the same time, the overall visual servoing efficiently recognizes and tracks the object enabling its grasping by the robot arm. It uses a predictive strategy utilizing specific second-order linear models for pan and tilt joints. Model predictive control (MPC) introduces into the system the ability to predict camera operation over the specific horizon according to the predefined tracking goals. As the system anticipates future positions over the horizon of operation, the setpoint prediction of the future tracked system positions is required. Visual object recognition and tracking system use particular strategies for preparing online tracked object extrapolation over MPC horizon. Therefore, the pan–tilt camera system is intrinsically coupled to camera-based recognition and tracking. Predictive pan–tilt positioning keeps the tracked system in the middle of the image, while the visual system extrapolation improves the tracking performance. The proposed approach is thoroughly tested in the dedicated Gazebo-based robot simulator. Finally, the system is implemented and validated on the Velma robot. The results and their comparison with other control strategies confirm the initial assumptions, allowing further visual servoing system development.
- 16 February 2023
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 111 (9) , 8383-8395
Open AccessPredictive tracking of an object by a pan–tilt camera of a robot
Moving-object tracking using a pan–tilt camera setup is quite a well-known task in robotics. However, the presented research addresses specific properties of the tracked object and introduces novel features to the pan–tilt camera control strategy. Pan–tilt camera control does not operate in an isolated environment. It is a part of the visual servoing system with specific goals. The system has to fulfill certain purposes, which affect its configuration and functionality. The pan–tilt system aims at keeping the visually tracked object within the middle of the image. At the same time, the overall visual servoing efficiently recognizes and tracks the object enabling its grasping by the robot arm. It uses a predictive strategy utilizing specific second-order linear models for pan and tilt joints. Model predictive control (MPC) introduces into the system the ability to predict camera operation over the specific horizon according to the predefined tracking goals. As the system anticipates future positions over the horizon of operation, the setpoint prediction of the future tracked system positions is required. Visual object recognition and tracking system use particular strategies for preparing online tracked object extrapolation over MPC horizon. Therefore, the pan–tilt camera system is intrinsically coupled to camera-based recognition and tracking. Predictive pan–tilt positioning keeps the tracked system in the middle of the image, while the visual system extrapolation improves the tracking performance. The proposed approach is thoroughly tested in the dedicated Gazebo-based robot simulator. Finally, the system is implemented and validated on the Velma robot. The results and their comparison with other control strategies confirm the initial assumptions, allowing further visual servoing system development.
- Open Access
- 14 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (2) , 688-695
Synthesis of Robotic System Controllers Using Robotic System Specification Language
Robotic System Specification Language (RSSL) stems from the embodied agent approach to robotic system design. It enables the specification of both the structure and activities of a multi-robot multi-agent robotic system. RSSL specification can be verified and automatically transformed by its compiler into a six-layered Robotic System Hierarchical Petri Net (RSHPN). RSHPN models the activities and structure of the designed robotic system. The automatically generated RSHPN is loaded into RSHPN Tool modeling RSHPNs and automatically generating the controller code. This approach was validated on several robotic systems. The use of RSSL and RSHPN facilitates the synthesis of robotic system controllers.
- 14 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (2) , 688-695
Open AccessSynthesis of Robotic System Controllers Using Robotic System Specification Language
Robotic System Specification Language (RSSL) stems from the embodied agent approach to robotic system design. It enables the specification of both the structure and activities of a multi-robot multi-agent robotic system. RSSL specification can be verified and automatically transformed by its compiler into a six-layered Robotic System Hierarchical Petri Net (RSHPN). RSHPN models the activities and structure of the designed robotic system. The automatically generated RSHPN is loaded into RSHPN Tool modeling RSHPNs and automatically generating the controller code. This approach was validated on several robotic systems. The use of RSSL and RSHPN facilitates the synthesis of robotic system controllers.
- Open Access
- 3 January 2022
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 150
Parameterised robotic system meta-model expressed by Hierarchical Petri nets
- 3 January 2022
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 150
Open AccessParameterised robotic system meta-model expressed by Hierarchical Petri nets
- Open Access
- 11 June 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 976
Utilisation of Embodied Agents in the Design of Smart Human–Computer Interfaces—A Case Study in Cyberspace Event Visualisation Control
The goal of the research reported here was to investigate whether the design methodology utilising embodied agents can be applied to produce a multi-modal human–computer interface for cyberspace events visualisation control. This methodology requires that the designed system structure be defined in terms of cooperating agents having well-defined internal components exhibiting specified behaviours. System activities are defined in terms of finite state machines and behaviours parameterised by transition functions. In the investigated case the multi-modal interface is a component of the Operational Centre which is a part of the National Cybersecurity Platform. Embodied agents have been successfully used in the design of robotic systems. However robots operate in physical environments, while cyberspace events visualisation involves cyberspace, thus the applied design methodology required a different definition of the environment. It had to encompass the physical environment in which the operator acts and the computer screen where the results of those actions are presented. Smart human–computer interaction (HCI) is a time-aware, dynamic process in which two parties communicate via different modalities, e.g., voice, gesture, eye movement. The use of computer vision and machine intelligence techniques are essential when the human is carrying an exhausting and concentration demanding activity. The main role of this interface is to support security analysts and operators controlling visualisation of cyberspace events like incidents or cyber attacks especially when manipulating graphical information. Visualisation control modalities include visual gesture- and voice-based commands.
- 11 June 2020
- Published by MDPI AG in Electronics
- Vol. 9 (6) , 976
Open AccessUtilisation of Embodied Agents in the Design of Smart Human–Computer Interfaces—A Case Study in Cyberspace Event Visualisation Control
The goal of the research reported here was to investigate whether the design methodology utilising embodied agents can be applied to produce a multi-modal human–computer interface for cyberspace events visualisation control. This methodology requires that the designed system structure be defined in terms of cooperating agents having well-defined internal components exhibiting specified behaviours. System activities are defined in terms of finite state machines and behaviours parameterised by transition functions. In the investigated case the multi-modal interface is a component of the Operational Centre which is a part of the National Cybersecurity Platform. Embodied agents have been successfully used in the design of robotic systems. However robots operate in physical environments, while cyberspace events visualisation involves cyberspace, thus the applied design methodology required a different definition of the environment. It had to encompass the physical environment in which the operator acts and the computer screen where the results of those actions are presented. Smart human–computer interaction (HCI) is a time-aware, dynamic process in which two parties communicate via different modalities, e.g., voice, gesture, eye movement. The use of computer vision and machine intelligence techniques are essential when the human is carrying an exhausting and concentration demanding activity. The main role of this interface is to support security analysts and operators controlling visualisation of cyberspace events like incidents or cyber attacks especially when manipulating graphical information. Visualisation control modalities include visual gesture- and voice-based commands.
- Open Access
- 10 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 71617-71627
Robotic System Specification Methodology Based on Hierarchical Petri Nets
The paper presents a methodology of creating a Hierarchical Petri Net modelling the activities of a multi-agent robotic system. The methodology follows the separation of concerns approach to the design of robot control software, thus five layers resulted, representing: the system composed of agents, agents’ subsystems, behaviours of subsystems, behaviour pattern, and finally inter-subsystem communication and transition function calculation. Blocking and non-blocking communication modes are taken into account. The robotic system structure and its activities are specified using the developed Robotic System HPN Tool. It facilitates modeling HPNs, verification of the activities of a robotic system through the HPN simulation and automatic code generation of an equivalent ROS based system. The specification methodology is presented on a simple example of designing a controller for the LWR4+ robot.
- 10 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 71617-71627
Open AccessRobotic System Specification Methodology Based on Hierarchical Petri Nets
The paper presents a methodology of creating a Hierarchical Petri Net modelling the activities of a multi-agent robotic system. The methodology follows the separation of concerns approach to the design of robot control software, thus five layers resulted, representing: the system composed of agents, agents’ subsystems, behaviours of subsystems, behaviour pattern, and finally inter-subsystem communication and transition function calculation. Blocking and non-blocking communication modes are taken into account. The robotic system structure and its activities are specified using the developed Robotic System HPN Tool. It facilitates modeling HPNs, verification of the activities of a robotic system through the HPN simulation and automatic code generation of an equivalent ROS based system. The specification methodology is presented on a simple example of designing a controller for the LWR4+ robot.