Lin Ma
Research Subjects
Lin Ma has a total of 135 co-authors. Here are the top co-authors by number of shared publications:
Kevin G. Taylor
13 shared publications- Peter David Lee
Department of Mechanical Engineering, University College London, London, UK
10 shared publications - Patrick J. Dowey
School of Earth and Environmental Sciences, University of Manchester, M13 9WJ, Manchester, UK
6 shared publications - Ernest Henry Rutter
Rock Deformation Laboratory, Dept. of Earth and Environmental Sciences, University of Manchester, Manchester M13 9PL, UK
5 shared publications Kevin Taylor
5 shared publicationsJingyue Hao
4 shared publications
Latest Publications
- Open Access
- 14 November 2026
- Published by Elsevier in Marine Geoscience and Energy Resources
Facies-controlled reactive mineral distributions in deep-marine lobes: implications for CO2 plume behaviour and mineral trapping
- 14 November 2026
- Published by Elsevier in Marine Geoscience and Energy Resources
Open AccessFacies-controlled reactive mineral distributions in deep-marine lobes: implications for CO2 plume behaviour and mineral trapping
- Open Access
- 15 October 2026
- Published by Geological Society of London in Journal of the Geological Society
Quantifying the heterogeneity of deep-water depositional environments for CO 2 storage: an outcrop-based example from the Hecho Group (Spanish Pyrenees)
Characterising heterogeneity at a range of scales for CO 2 storage is critical to balance reservoir quality (net storage and injection feasibility) against internal trapping efficiency. Here, the deep-water Banastón System (Middle Eocene Hecho Group) of the South Pyrenean Foreland Basin is utilised as a subsurface reservoir analogue for application to subsurface settings. An 80 km down-dip transect was analysed to quantify lithological, mineralogical and reservoir heterogeneity from bed to depositional element scale, including sedimentological description, permeability estimates and petrographic analysis. Reservoir geometries include amalgamated and scoured channel-fill and channel-lobe transition deposits, proximal lobes that show compensational stacking and which, down depositional-dip, transition into increasingly tabular and compartmentalised medial lobes and distal lobe fringes. Quartz and extrabasinal lithics dominate proximal turbidites, feldspar and mica are abundant in medial-lobe deposits, whilst distal fringe turbidites and hybrid beds are clay matrix-rich, fine-grained carbonate-rich, micaceous and overlain by carbonate-rich mud, thereby altering the reactive mineral composition from proximal to distal deposits. Proximal to medial lobes feature good reservoir characteristics for net storage of CO 2 , tabular geometries with inherent vertical permeability heterogeneity that would be conducive to lateral plume spread, and mineralogical heterogeneity that could promote CO 2 -reservoir-brine reactions, indicating their potential as ideal storage sites.
- 15 October 2026
- Published by Geological Society of London in Journal of the Geological Society
Open AccessQuantifying the heterogeneity of deep-water depositional environments for CO 2 storage: an outcrop-based example from the Hecho Group (Spanish Pyrenees)
Characterising heterogeneity at a range of scales for CO 2 storage is critical to balance reservoir quality (net storage and injection feasibility) against internal trapping efficiency. Here, the deep-water Banastón System (Middle Eocene Hecho Group) of the South Pyrenean Foreland Basin is utilised as a subsurface reservoir analogue for application to subsurface settings. An 80 km down-dip transect was analysed to quantify lithological, mineralogical and reservoir heterogeneity from bed to depositional element scale, including sedimentological description, permeability estimates and petrographic analysis. Reservoir geometries include amalgamated and scoured channel-fill and channel-lobe transition deposits, proximal lobes that show compensational stacking and which, down depositional-dip, transition into increasingly tabular and compartmentalised medial lobes and distal lobe fringes. Quartz and extrabasinal lithics dominate proximal turbidites, feldspar and mica are abundant in medial-lobe deposits, whilst distal fringe turbidites and hybrid beds are clay matrix-rich, fine-grained carbonate-rich, micaceous and overlain by carbonate-rich mud, thereby altering the reactive mineral composition from proximal to distal deposits. Proximal to medial lobes feature good reservoir characteristics for net storage of CO 2 , tabular geometries with inherent vertical permeability heterogeneity that would be conducive to lateral plume spread, and mineralogical heterogeneity that could promote CO 2 -reservoir-brine reactions, indicating their potential as ideal storage sites.
- 13 May 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (21) , 11236-11246
Nitrogen Evolution in Type I Kerogen and Derived Shale Oil during Thermal Maturation
- 13 May 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (21) , 11236-11246
Nitrogen Evolution in Type I Kerogen and Derived Shale Oil during Thermal Maturation
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
From Pore to Core: Multi-Scale Evidence of Underground Hydrogen Storage Stability After Three Months of Hydrogen Exposure Under Reservoir Conditions
Underground hydrogen storage (UHS) is a cornerstone technology for net-zero energy systems, offering terawatt-hour capacity to buffer renewable intermittency. Although many experiments have been reported on hydrogen flow in porous rocks, robust evidence for long-duration reactions and impact on transport under combined high temperature and high pressure remains limited, leaving a critical uncertainty around reservoir stability during seasonal storage.Here we provide firm, multi-scale pre/post experimental constraints on two major onshore UK candidate aquifers—the Triassic Sherwood Sandstone Group and the Cretaceous Lower Greensand Group—after ~3 months exposure to H₂ at simulated in-situ conditions deep underground, 50 °C and 150 bar. We integrate X-ray computed tomography (3D pore–grain architecture and bulk phase fractions), optical petrography (fabric/facies), SEM imaging (micro-textures and fines), and XRD (mineralogy) to resolve hydrogen impacts across scales. We also performed dynamic synchrotron images of hydrogen flows in the porous rocks to investigate the reaction impact on the transport. We performed systematically investigations on the pore networks, grain framework, or mineralogy, porosity and permeability. The results show the pore network changes varied by ~65 wt%) appear inert under these conditions, while facies-scale heterogeneity governs pore connectivity and is expected to dominate injectivity and withdrawal behaviour. These results reduce a key uncertainty for UHS in silicate-rich sandstones, support prioritising connected macro-porous facies in site screening and well placement, and provide a transferable workflow for rapid hydrogen–rock interaction assessment and monitoring. Future work should extend to potentially more reactive lithologies, cyclic operation, longer exposure, and bio-active systems, in order to complete risk evaluation for large-scale seasonal storage.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessFrom Pore to Core: Multi-Scale Evidence of Underground Hydrogen Storage Stability After Three Months of Hydrogen Exposure Under Reservoir Conditions
Underground hydrogen storage (UHS) is a cornerstone technology for net-zero energy systems, offering terawatt-hour capacity to buffer renewable intermittency. Although many experiments have been reported on hydrogen flow in porous rocks, robust evidence for long-duration reactions and impact on transport under combined high temperature and high pressure remains limited, leaving a critical uncertainty around reservoir stability during seasonal storage.Here we provide firm, multi-scale pre/post experimental constraints on two major onshore UK candidate aquifers—the Triassic Sherwood Sandstone Group and the Cretaceous Lower Greensand Group—after ~3 months exposure to H₂ at simulated in-situ conditions deep underground, 50 °C and 150 bar. We integrate X-ray computed tomography (3D pore–grain architecture and bulk phase fractions), optical petrography (fabric/facies), SEM imaging (micro-textures and fines), and XRD (mineralogy) to resolve hydrogen impacts across scales. We also performed dynamic synchrotron images of hydrogen flows in the porous rocks to investigate the reaction impact on the transport. We performed systematically investigations on the pore networks, grain framework, or mineralogy, porosity and permeability. The results show the pore network changes varied by ~65 wt%) appear inert under these conditions, while facies-scale heterogeneity governs pore connectivity and is expected to dominate injectivity and withdrawal behaviour. These results reduce a key uncertainty for UHS in silicate-rich sandstones, support prioritising connected macro-porous facies in site screening and well placement, and provide a transferable workflow for rapid hydrogen–rock interaction assessment and monitoring. Future work should extend to potentially more reactive lithologies, cyclic operation, longer exposure, and bio-active systems, in order to complete risk evaluation for large-scale seasonal storage.
- Open Access
- 9 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (42) , 20397-20409
Temporal Dynamics of Reactive CO 2 Flow in Carbonate Rock: Insights from 4D Synchrotron Imaging
This research examines the dynamics of reactive CO2 transport in carbonate rock, focusing on the impact of carbonic acid-induced formation damage. We provide real-time visualization of these processes by employing four-dimensional (4D) high-resolution synchrotron imaging at the I13 beamline hosted at the Diamond Light Source. We visualize and quantify the temporal effects of reactive CO2 transport at the pore scale in carbonate rock. The experiment involved injecting CO2-saturated brine through the sample with in situ scanning to track the different stages of chemical dissolution. Analysis of the images shows a channelled dissolution pattern which corresponds with a gradual increase in porosity due to pore structure changes. Pore network models were generated from the segmented images to carry out a sequence of drainage and imbibition simulations. The result demonstrated that reduced capillary entry pressure with increased pore connectivity after dissolution. Furthermore, the trapping efficiency was quantified to predict a slight decrease in dissolution as the pores become broader and better connected.
- 9 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (42) , 20397-20409
Open AccessTemporal Dynamics of Reactive CO 2 Flow in Carbonate Rock: Insights from 4D Synchrotron Imaging
This research examines the dynamics of reactive CO2 transport in carbonate rock, focusing on the impact of carbonic acid-induced formation damage. We provide real-time visualization of these processes by employing four-dimensional (4D) high-resolution synchrotron imaging at the I13 beamline hosted at the Diamond Light Source. We visualize and quantify the temporal effects of reactive CO2 transport at the pore scale in carbonate rock. The experiment involved injecting CO2-saturated brine through the sample with in situ scanning to track the different stages of chemical dissolution. Analysis of the images shows a channelled dissolution pattern which corresponds with a gradual increase in porosity due to pore structure changes. Pore network models were generated from the segmented images to carry out a sequence of drainage and imbibition simulations. The result demonstrated that reduced capillary entry pressure with increased pore connectivity after dissolution. Furthermore, the trapping efficiency was quantified to predict a slight decrease in dissolution as the pores become broader and better connected.
- Open Access
- 21 July 2025
- Published by Elsevier in Measurement
- Vol. 256
Monitoring of porosity and saline diffusion in porous materials through high-frequency electromagnetic tomography
- 21 July 2025
- Published by Elsevier in Measurement
- Vol. 256
Open AccessMonitoring of porosity and saline diffusion in porous materials through high-frequency electromagnetic tomography
- Open Access
- 15 July 2025
- Published by Elsevier in Geothermics
- Vol. 132
Experimental 3D visualisation of fines generation and migration in sandstone during water injection: Implication on the efficiency of aquifer thermal energy storage
- 15 July 2025
- Published by Elsevier in Geothermics
- Vol. 132
Open AccessExperimental 3D visualisation of fines generation and migration in sandstone during water injection: Implication on the efficiency of aquifer thermal energy storage
- Open Access
- 8 February 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 307
Dynamic imaging of the effect of pore microstructure factors on fine particle migration and deposition during fluid flow through porous media
- 8 February 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 307
Open AccessDynamic imaging of the effect of pore microstructure factors on fine particle migration and deposition during fluid flow through porous media
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
4D synchrotron imaging of CO2 transport in reservoir rocks and caprocks: Informing safe CO2 sequestration
Tracking CO2 transport in subsurface rock during geological carbon sequestration has received significant attention. Although X-ray computed tomography (XCT) imaging techniques, visualization and quantification of CO2 behavior has been undertaken by previous researchers, little attention has been given to the nature of CO2 transport in a reservoir-caprock interface with well-developed pores in the reservoir and micro-fractures in the caprock. As the transition of two different pore systems, this complex system is crucial in controlling the sequestration safety case. We have used advanced time-lapse synchrotron imaging at in-situ pressure and temperature conditions to image the CO2 transport process in such an experimental system, for both gaseous and supercritical phases.Dynamic XCT images of fluids and the pore- and fracture-system in the mudstone and sandstone couplet were acquired at high resolution (effective voxel size 1.625 µm). Strain maps following high-speed gaseous and supercritical CO2 (ScCO2) flooding were modelled using a digital volume correlation (DVC) method to reveal the hydro-mechanical effects. The results suggest that under the influence of brine, high-speed gaseous CO2 will not increase the total pore-throat volume and can even cause a reduction in permeability in sandstone due to fines migration induced by CO2 flooding. Clay behavior, notably dispersion in brine, migration of fines and swelling induced by CO2, plays a notable role in the opening and closing of pores/fracture. Fluid breakthrough occurred at 10.6 MPa during high-speed ScCO2 injection. The significant fracturing effect of high-speed ScCO2 resulted in the connection of natural fractures in the mudstone with newly developed secondary branches and also created larger pore space in the sandstone, leading to an increase in porosity by approximately 2.8 times in the mudstone and 1.6 times in the sandstone. Additionally, there was an approximate increase of 2.6 times and 8.6 times in the permeability of mudstone and sandstone, respectively, after CO2 phase transition. The concentrated strains around the main fracture in the mudstone and web-like strains around the boundary of granular minerals in sandstone show the different modes of action of ScCO2 when passing through a reservoir rock and caprock system. This work is of practical significance in improving understanding of CO2-fluid-rock interaction in a complex reservoir-caprock system.
- 20 January 2025
- Published by Copernicus GmbH
Open Access4D synchrotron imaging of CO2 transport in reservoir rocks and caprocks: Informing safe CO2 sequestration
Tracking CO2 transport in subsurface rock during geological carbon sequestration has received significant attention. Although X-ray computed tomography (XCT) imaging techniques, visualization and quantification of CO2 behavior has been undertaken by previous researchers, little attention has been given to the nature of CO2 transport in a reservoir-caprock interface with well-developed pores in the reservoir and micro-fractures in the caprock. As the transition of two different pore systems, this complex system is crucial in controlling the sequestration safety case. We have used advanced time-lapse synchrotron imaging at in-situ pressure and temperature conditions to image the CO2 transport process in such an experimental system, for both gaseous and supercritical phases.Dynamic XCT images of fluids and the pore- and fracture-system in the mudstone and sandstone couplet were acquired at high resolution (effective voxel size 1.625 µm). Strain maps following high-speed gaseous and supercritical CO2 (ScCO2) flooding were modelled using a digital volume correlation (DVC) method to reveal the hydro-mechanical effects. The results suggest that under the influence of brine, high-speed gaseous CO2 will not increase the total pore-throat volume and can even cause a reduction in permeability in sandstone due to fines migration induced by CO2 flooding. Clay behavior, notably dispersion in brine, migration of fines and swelling induced by CO2, plays a notable role in the opening and closing of pores/fracture. Fluid breakthrough occurred at 10.6 MPa during high-speed ScCO2 injection. The significant fracturing effect of high-speed ScCO2 resulted in the connection of natural fractures in the mudstone with newly developed secondary branches and also created larger pore space in the sandstone, leading to an increase in porosity by approximately 2.8 times in the mudstone and 1.6 times in the sandstone. Additionally, there was an approximate increase of 2.6 times and 8.6 times in the permeability of mudstone and sandstone, respectively, after CO2 phase transition. The concentrated strains around the main fracture in the mudstone and web-like strains around the boundary of granular minerals in sandstone show the different modes of action of ScCO2 when passing through a reservoir rock and caprock system. This work is of practical significance in improving understanding of CO2-fluid-rock interaction in a complex reservoir-caprock system.