HZHua Zheng

Hua Zheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hua Zheng has a total of 51 co-authors. Here are the top co-authors by number of shared publications:

  • Qiuyu Zhang

    Northwestern Polytechnical University

    8 shared publications
  • Ruidong Cheng

    Key Laboratory of Special Functional and Smart Polymer Materials of Ministry of Industry and Information Technology, School of Chemistry and Chemical Engineering

    3 shared publications
  • Jie Li

    School of Chemistry and Chemical Engineering, Key Laboratory of Special Functional and Smart Polymer Materials of Ministry of Industry and Information Technology

    2 shared publications
  • Li Zhou

    Guangdong Provincial Key Laboratory of Protein Modification and Degradation School of Basic Medical Sciences Guangzhou Medical University Guangzhou 511436 P. R. China

    2 shared publications
  • Qing Liu

    Research & Development Institute of Northwestern Polytechnical University in Shenzhen People's Republic of China

    2 shared publications
  • Xuehui Zhang

    Key Laboratory of Special Functional and Smart Polymer Materials of Ministry of Industry and Information Technology, School of Chemistry and Chemical Engineering

    2 shared publications

Latest Publications

  • Y-Shaped Fluorinated Metallo-Polyzwitterion from Cobaltocenium: Facile Synthesis and Enhanced Antifouling Performance

    by Yuankang Liu, Shida Hou, Yunxin Xu, Jing Yan, Zisu Fang, Yuxuan Gong, Xudong Deng, Hua Zheng, Qiuyu Zhang, Yi Yan

    A Y-shaped fluorinated metallo-zwitterionic monomer NB-Co+-STFSI– with cobaltocenium as the cationic group and sulfonyl(trifluoromethylsulfonyl) imide anion (STFSI, −SO2N(−)SO2CF3) as the anionic group was synthesized via catalyst-free hydroamination and polymerized via ring-opening metathesis polymerization (ROMP) to give the corresponding fluorinated metallo-polyzwitterion, PNB-Co+-STFSI–. In such a zwitterionic system, the introduction of both the hydrophilic cobaltocenium and hydrophobic fluorocarbon unit of STFSI enables the regulation of hydration properties, leading to distinct solution and surface properties that deviate from those of conventional zwitterionic polyelectrolytes. Although the resulting polymer is water-insoluble, the PNB-Co+-STFSI– coating exhibits strong surface hydrophilicity. Using a simple dip-coating process, the PNB-Co+-STFSI– coatings adhere stably to various substrates and demonstrate exceptional antifouling performance, reducing bacterial adhesion by >95% and suppressing protein adsorption to <5% within 8 h; even after 72 h, protein adsorption remains below 15%. This work not only expands the family of zwitterionic polymers but also opens new avenues for the design of advanced antifouling materials.


  • Detachable, Self-Repairing, and Closed-Loop Recyclable Self-Initiated Light-Curing Adhesives with Controllable Bonding Strength

    by Zhao Liu, Xiaoming Ren, Hua Zheng, Junjian Xie, Qiuyu Zhang

    Light-curing adhesives (LCAs) play an indispensable role in the field of electronic packaging due to their rapid polymerization response under illumination. However, conventional LCAs typically lack detachability and self-healing capability and often encounter challenges related to closed-loop recyclability and bonding strength adjustability. Herein, a self-photosensitive atoxic prepolymer is developed by the simple esterification of natural lipoic acid (TA) with polycaprolactone diol (PCL), enabling complete light-curing within 2 min without additional photoinitiators. The disulfide bond in the prepolymer can endow the green adhesives with detachability (heating at 120 °C for 16 s), dual-stimuli-responsive self-repairing properties (UV radiation for 10 min or heating at 60 °C for 3 h), and efficient closed-loop recycling performance. Moreover, the crystallization behavior of PCL contributes to the versatile adhesives with controllable bonding strength after photocuring, along with a maximum adhesion strength of 5.1 MPa (cured adhesive for 20 min of crystallization). This novel strategy grants the LCA versatility, which opens up an original way for designing electronic packaging adhesives with higher practical value.


  • A Glassy Hydrogel Platform for Color-Tunable Room-Temperature Phosphorescence via Unmodified Aromatic Compounds Encapsulation and Arbitrary Shape Programming

    by Ruidong Cheng, Xuehui Zhang, Hua Zheng, Jie Li, Feijie Ge, Qiuyu Zhang

    Realizing full-color room-temperature phosphorescence (RTP) under aqueous conditions remains a significant challenge due to the inherent difficulty of stabilizing hydrophobic phosphors within water-based matrices, let alone for unmodified commercial hydrophobic aromatic compounds. In this work, we introduce a versatile glassy hydrogel platform engineered through a solvent exchange-induced nanoscale phase separation strategy, which enables the stable encapsulation of various commercial aromatic compounds within a rigid polymer network. The resulting hydrogels exhibit tunable full-color RTP with long-lived lifetimes, enhanced emission underwater, and outstanding mechanical robustness. In addition to their plastic-like rigidity, these glassy RTP hydrogels display shape-memory characteristics and allow for programmable 2D/3D structural reconfiguration. Notably, they facilitate multidimensional information encryption through multicolor triplet-to-singlet Förster resonance energy transfer (TS-FRET) and enable high-resolution spatial patterning. This work offers a general strategy for constructing RTP hydrogels and hydrogel-derived plastics, opening promising avenues for advanced anticounterfeiting, optical sensing, and underwater photonic applications.


  • Microneedle-Mediated Synergistic Photothermal and Chemotherapy for Targeted Melanoma Treatment

    by Yanni Zhang, Chuyi Liu, Zhiguo Li, Yingjia Liu, Hua Zheng, Qianyu Lin, Luofeng Yu, Yi Jian Boo, Benjamin Qi Yu Chan, Xian Jun Loh, et al.

    Melanoma, a malignant skin tumor originating from melanocytes, is typically treated with surgery in its early stages. However, chemotherapy becomes the primary treatment as the disease progresses to intermediate and advanced stages. The parenteral administration of chemotherapy can cause anxiety, discomfort, and infection risks, especially in immunocompromised cancer patients. Additionally, the circulating drugs can lead to systemic toxicity and side effects. Microneedles (MNs) provide a safer, less invasive alternative to address these issues. Herein, we demonstrated the effectiveness of integrating antimicrobial MNs with combined photothermal and chemotherapy treatment modalities against melanoma, presenting a promising approach to improving cancer treatment outcomes while minimizing associated risks. By leveraging the unique properties of chitosan (CS) and the versatility of poly(vinyl alcohol) (PVA), we fabricated physically cross-linked MNs with inherent antibacterial and antiviral properties. The physical cross-linked network not only accommodated polypyrrole nanoparticles (PPy NPs) for photothermal capabilities but also facilitated drug [doxorubicin hydrochloride (DOX)] loading and release over an extended period. Interestingly, in vitro and in vivo studies revealed that the MNs possess intrinsic antimelanoma properties. Compared to monotherapies, the combination of photothermal therapy and chemotherapy exhibited enhanced effectiveness against melanoma. This research paves the way for safer, more effective cancer treatment strategies.


  • Bioactive Nb 2 C MXene‐Functionalized Hydrogel with Microenvironment Remodeling and Enhanced Neurogenesis to Promote Skeletal Muscle Regeneration and Functional Restoration

    by Hua Zheng, Zuoting Yang, Li Zhou, Baoliang Zhang, Ruidong Cheng, Qiuyu Zhang

    The complete structure‐functional repair of volumetric muscle loss (VML) remains a giant challenge and biomedical hydrogels to remodel microenvironment and enhance neurogenesis have appeared to be a promising direction. However, the current hydrogels for VML repair hardly achieve these two goals simultaneously due to their insufficient functionality and the challenge in high‐cost of bioactive factors. In this study, a facile strategy using Nb 2 C MXene‐functionalized hydrogel (OPTN) as a bioactive scaffold is proposed to promote VML repair with skeletal muscle regeneration and functional restoration. In vitro experiments show that OPTN scaffold can effectively scavenge reactive oxygen species (ROS), guide macrophages polarization toward M2 phenotype, and resist bacterial infection, providing a favorable microenvironment for myoblasts proliferation as well as the endothelial cells proliferation, migration, and tube formation. More importantly, OPTN scaffold with electroactive feature remarkably boosts myoblasts differentiation and mesenchymal stem cells neural differentiation. Animal experiments further confirm that OPTN scaffold can achieve a prominent structure‐functional VML repair by attenuating ROS levels, alleviating inflammation, reducing fibrosis, and facilitating angiogenesis, newborn myotube formation, and neurogenesis. Collectively, this study provides a highly promising and effective strategy for the structure‐functional VML repair through designing bioactive multifunctional hydrogel with microenvironment remodeling and enhanced neurogenesis.


  • Nanoporous, Ultrastiff, and Transparent Plastic-like Polymer Hydrogels Enabled by Hydrogen Bonding-Induced Self-Assembly

    by Ruidong Cheng, Xuehui Zhang, Jie Li, Hua Zheng, Qiuyu Zhang

    Most natural supporting tissues possess both exceptional mechanical strength, a significant amount of water, and the anisotropic structure, as well as nanoscale assembly. These properties are essential for biological processes, but have been challenging to emulate in synthetic materials. In an effort to achieve simultaneous improvement of these trade-off features, a hydrogen bonding-induced self-assembly strategy was introduced to create nanoporous plastic-like polymer hydrogels. Multiple hydrogen bonding-mediated networks and nanoporous orientation structures endow transparent hydrogels with remarkable mechanical robustness. They exhibit Young's modulus of up to 223.7 MPa and a breaking strength of up to 10.3 MPa, which are superior to those of most common polymer hydrogels. The uniform porous nanostructures of hydrogen-bonded hydrogels contribute to a significantly larger specific surface area compared to conventional hydrogels. This allows for the retention of high mechanical properties in environments with a high water content of 70 wt %. A rubbery stage is observed during the heating process, which can reverse and reshape the manufacture of objects with various desired 2D or 3D shapes using techniques such as origami and kirigami. Finally, as a proof-of-concept, the outstanding mechanical properties of poly(MAA-co-AA-co-NVCL) hydrogel, combined with its high water content, make it suitable for applications such as smart temperature monitors, multilevel information anticounterfeiting, and artificial muscles.


  • Nanoenzyme-Reinforced Multifunctional Scaffold Based on Ti3C2Tx MXene Nanosheets for Promoting Structure–Functional Skeletal Muscle Regeneration via Electroactivity and Microenvironment Management

    by Hua Zheng, Fang Cheng, Dong Guo, Xijing He, Li Zhou, Qiuyu Zhang

    The completed volumetric muscle loss (VML) regeneration remains a challenge due to the limited myogenic differentiation as well as the oxidative, inflammatory, and hypoxic microenvironment. Herein, a 2D Ti3C2Tx MXene@MnO2 nanocomposite with conductivity and microenvironment remodeling was fabricated and applied in developing a multifunctional hydrogel (FME) scaffold to simultaneously conquer these hurdles. Among them, Ti3C2Tx MXene with electroconductive ability remarkably promotes myogenic differentiation via enhancing the myotube formation and upregulating the relative expression of the myosin heavy chain (MHC) protein and myogenic genes (MyoD and MyoG) in myogenesis. The MnO2 nanoenzyme-reinforced Ti3C2Tx MXene significantly reshapes the hostile microenvironment by eliminating reactive oxygen species (ROS), regulating macrophage polarization from M1 to M2 and continuously supplying O2. Together, the FME hydrogel as a bioactive multifunctional scaffold significantly accelerates structure-functional VML regeneration in vivo and represents a multipronged strategy for the VML regeneration via electroactivity and microenvironment management.


  • A Novel Reprocessable and Recyclable Acrylonitrile–Butadiene Rubber Based on Dynamic Oxime‐Carbamate Bond

    by Wenyan Wang, Qingfei Song, Qing Liu, Hua Zheng, Chunmei Li, Yi Yan, Qiuyu Zhang

    The covalent cross‐linked rubber has outstanding mechanical properties and chemical resistance, making it possible for a wide range of applications. Towards efforts to resource waste and environmental pollution, rubber recycling is a concerning problem. However, it is a big challenge to endow the most widely used commercial rubber systems with recyclability. In this paper, a novel reprocessable and recyclable acrylonitrile–butadiene rubber (NBR) is developed by introducing oxime‐carbamate bonds into the raw NBR. Amidoxime NBR is prepared by a nucleophilic addition reaction of hydroxylamine hydrochloride and raw NBR, and then cross‐linked amidoxime NBR using different amounts of toluene diisocynate (TDI). Results show that the obtained material exhibits good reprocessable property; the repairing efficiency exceeds 90% after two remoldings. In addition, it also has better mechanical properties: A tensile strength reaching a maximum value of 4.85 MPa when TDI cross‐linker is 15.36 wt%, which is superior to vulcanized NBR (3.18 MPa).


  • Performance-modified polyimine vitrimers: flexibility, thermal stability and easy reprocessing

    by Hua Zheng, Qing Liu, Xingfeng Lei, Yanhui Chen, Baoliang Zhang, Qiuyu Zhang