Dambarudhar Mohanta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dambarudhar Mohanta has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
Abhijit Saha
UGC-DAE Consortium for Scientific Research Sector-III, LB-8, Bidhan Nagar, Salt Lake Kolkata 700 106 India
10 shared publicationsA. Choudhury
Optoelectronics and Photonics Laboratory, Department of Physics, Tezpur University, Tezpur 784028, Assam, India
8 shared publications- Sayan Bayan
Department of Physics, Rajiv Gandhi University, Doimukh, Arunachal Pradesh 791112, India
7 shared publications Nibedita Paul
Department of Physics, National Institute of Technology Nagaland, Dimapur, India
6 shared publicationsSamiran Hazarika
Tezpur University
6 shared publications- Bhupali Deka
Tezpur Univ, Dept Phys, Nanosci & Soft Matter Lab, Tezpur 784028, Assam, India
5 shared publications
Latest Publications
- 9 September 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 43 (10) , 2263
Origin of black and white coloration in papilio butterfly wings and their superhydrophobic features
The micromorphology-based optical and surface-wettability features of butterfly wing scales offer valuable design strategies for bioinspired materials. Here, we investigate the origin of apparent black and white coloration in the Common Mormon and Common Lime papilio butterflies by employing structural, optical, and simulation studies. Microspectroscopic analyses show that black scales achieve profoundly low reflectance (∼2−4%) through strong broadband absorption, whereas white scales exhibit higher reflectance on the order of ∼50−60%. Field-emission scanning electron microscopy (FESEM) reveals open and closed lumens in the wing scales that dictate varying air porosity in black and white scales. Combined microstructural observations and first-order optical modeling infer that higher porosity in the upper lamina of black scales drives light trapping, while wavelength-dependent diffuse scattering dominates white scale reflection. Concurrently, both scale types display superhydrophobicity with water contact angles (WCAs) of ∼142 ∘ −151 ∘ and very low adhesion, facilitated by Cassie–Cassie state governed by two-tier of surface roughness. These coexisting optical and non-wetting functionalities highlight bioinspired routes to multifunctional antireflective coatings, light-scattering media, and self-cleaning surfaces.
- 9 September 2026
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 43 (10) , 2263
Origin of black and white coloration in papilio butterfly wings and their superhydrophobic features
The micromorphology-based optical and surface-wettability features of butterfly wing scales offer valuable design strategies for bioinspired materials. Here, we investigate the origin of apparent black and white coloration in the Common Mormon and Common Lime papilio butterflies by employing structural, optical, and simulation studies. Microspectroscopic analyses show that black scales achieve profoundly low reflectance (∼2−4%) through strong broadband absorption, whereas white scales exhibit higher reflectance on the order of ∼50−60%. Field-emission scanning electron microscopy (FESEM) reveals open and closed lumens in the wing scales that dictate varying air porosity in black and white scales. Combined microstructural observations and first-order optical modeling infer that higher porosity in the upper lamina of black scales drives light trapping, while wavelength-dependent diffuse scattering dominates white scale reflection. Concurrently, both scale types display superhydrophobicity with water contact angles (WCAs) of ∼142 ∘ −151 ∘ and very low adhesion, facilitated by Cassie–Cassie state governed by two-tier of surface roughness. These coexisting optical and non-wetting functionalities highlight bioinspired routes to multifunctional antireflective coatings, light-scattering media, and self-cleaning surfaces.
- 8 September 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (10) , 993
Facile synthesis and formation mechanism of SnSe/SnS mixed-dimensional monochalcogenides
- 8 September 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (10) , 993
Facile synthesis and formation mechanism of SnSe/SnS mixed-dimensional monochalcogenides
- 20 November 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (45) , 26033-26040
Interfacial excitons across dimensional boundaries: a mixed-dimensional SnS/BNNT heterostructure
Anisotropic behavior of interfacial excitons in mixed-dimensional SnS/BNNT heterostructure.
- 20 November 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (45) , 26033-26040
Interfacial excitons across dimensional boundaries: a mixed-dimensional SnS/BNNT heterostructure
Anisotropic behavior of interfacial excitons in mixed-dimensional SnS/BNNT heterostructure.
- 3 November 2025
- Published by Elsevier in Current Applied Physics
- Vol. 81, 45-56
Investigating textural fractals in Bougainvillea petals for wettability and biomimetic surface design
- 3 November 2025
- Published by Elsevier in Current Applied Physics
- Vol. 81, 45-56
Investigating textural fractals in Bougainvillea petals for wettability and biomimetic surface design
- Open Access
- 6 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (5)
Distinct partial and complete droplet bouncing states on (super) hydrophobic leaf surfaces with ultra-low- to high-adhesion textural features
We report on surface texture and tilting-based microdroplet impact dynamics on four distinct plant species, namely, Kalanchoe, Ziziphus, Mesua, and Litchi. Herein, conditions responsible for partial and complete rebound states are predicted after having analyzed droplet-shape evolution for distinct cases of (super)hydrophobicity and surface adhesion. The impacting water droplet with low Weber numbers (We ∼ 2.8) displays complete rebound characteristics for all the leaf-types under study. With an augment in We (∼14.4 and 25.8), low adhesion, superhydrophobic Kalanchoe leaf reveals a complete rebound feature, whereas, high-adhesion, superhydrophobic Ziziphus leaf exhibited an unusual partial rebound state, giving off “parent” and sticky “residual” parts. Interestingly, the dynamic partial wetting transition from the Cassie-to- Wenzel state is noted in this species upon droplet impact following the Weber number criterion, 5.7<Wecri<8.6. Furthermore, with an increase in surface inclination from ∼0° to 30°, the partial- to complete droplet rebound feature was seen on the Ziziphus leaf. In contrast, near superhydrophobic and high-adhesion Mesua and Litchi leaf surfaces showed complete rebounding features and oscillation prior to attaining static equilibrium. The maximum spreading parameter (βmax) ranges from ∼1.2 to 1.9 for all the leaf-types and with varied We (∼2.8, 14.4, and 25.8) and that it falls only marginally with an increase in tilting, witnessed for the highest We. Consequently, the contact time, τc alters from ∼12.2 to ∼10.2 ms within mentioned ranges of surface inclination, and We. Insights on droplet dynamics have potential in microfluidics, anti-icing, and greener pesticide spray management.
- 6 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (5)
Open AccessDistinct partial and complete droplet bouncing states on (super) hydrophobic leaf surfaces with ultra-low- to high-adhesion textural features
We report on surface texture and tilting-based microdroplet impact dynamics on four distinct plant species, namely, Kalanchoe, Ziziphus, Mesua, and Litchi. Herein, conditions responsible for partial and complete rebound states are predicted after having analyzed droplet-shape evolution for distinct cases of (super)hydrophobicity and surface adhesion. The impacting water droplet with low Weber numbers (We ∼ 2.8) displays complete rebound characteristics for all the leaf-types under study. With an augment in We (∼14.4 and 25.8), low adhesion, superhydrophobic Kalanchoe leaf reveals a complete rebound feature, whereas, high-adhesion, superhydrophobic Ziziphus leaf exhibited an unusual partial rebound state, giving off “parent” and sticky “residual” parts. Interestingly, the dynamic partial wetting transition from the Cassie-to- Wenzel state is noted in this species upon droplet impact following the Weber number criterion, 5.7<Wecri<8.6. Furthermore, with an increase in surface inclination from ∼0° to 30°, the partial- to complete droplet rebound feature was seen on the Ziziphus leaf. In contrast, near superhydrophobic and high-adhesion Mesua and Litchi leaf surfaces showed complete rebounding features and oscillation prior to attaining static equilibrium. The maximum spreading parameter (βmax) ranges from ∼1.2 to 1.9 for all the leaf-types and with varied We (∼2.8, 14.4, and 25.8) and that it falls only marginally with an increase in tilting, witnessed for the highest We. Consequently, the contact time, τc alters from ∼12.2 to ∼10.2 ms within mentioned ranges of surface inclination, and We. Insights on droplet dynamics have potential in microfluidics, anti-icing, and greener pesticide spray management.
- 27 January 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (2) , 025931
Generating immiscible localized WC phase in layered WS2 upon 15 keV C2+ irradiation
Herein, we report on the insertion of tungsten carbide (WC) phase within tungsten disulfide (WS2) nanosheets taking advantage of the combinatorial effects of implantation of C with low energy irradiation of 15 keV C2+ ions and generating sulfur vacancies. The x-ray diffraction (XRD) analyses suggest the co-existence of WC and WS2 hexagonal phases at mid-fluences of ion implantation, typically in the range of 3.5 × 1015 – 7.5 × 1015 ions cm−2. The phase analysis revealed that WC content was highest at a fluence of 3.5 × 1015 ions cm−2 with ion irradiation of competing electronic (inelastic) and nuclear (elastic) energy losses. The defect-mediated peak can be probed in the Raman spectra, which is the result of numerous point defects (specifically, S vacancies and C as dopants) caused due to the ion irradiation event. First-principles calculations have also been carried out to study the geometrical constructs and electronic structures of WS2 before and after implantation. The doped C atoms in WS2 introduce localized defect states in the conduction band with minima at the M point of the Brillouin zone. Interestingly, the model predicts a semi-metallic behavior, especially when C and S vacancies tend to co-exist. Generating an immiscible WC phase within a few layered WS2 sheets is believed to enhance both the mechanical strength and stability of the specimen apart from the introduction of semi-metallicity needed for desired applications.
- 27 January 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (2) , 025931
Generating immiscible localized WC phase in layered WS2 upon 15 keV C2+ irradiation
Herein, we report on the insertion of tungsten carbide (WC) phase within tungsten disulfide (WS2) nanosheets taking advantage of the combinatorial effects of implantation of C with low energy irradiation of 15 keV C2+ ions and generating sulfur vacancies. The x-ray diffraction (XRD) analyses suggest the co-existence of WC and WS2 hexagonal phases at mid-fluences of ion implantation, typically in the range of 3.5 × 1015 – 7.5 × 1015 ions cm−2. The phase analysis revealed that WC content was highest at a fluence of 3.5 × 1015 ions cm−2 with ion irradiation of competing electronic (inelastic) and nuclear (elastic) energy losses. The defect-mediated peak can be probed in the Raman spectra, which is the result of numerous point defects (specifically, S vacancies and C as dopants) caused due to the ion irradiation event. First-principles calculations have also been carried out to study the geometrical constructs and electronic structures of WS2 before and after implantation. The doped C atoms in WS2 introduce localized defect states in the conduction band with minima at the M point of the Brillouin zone. Interestingly, the model predicts a semi-metallic behavior, especially when C and S vacancies tend to co-exist. Generating an immiscible WC phase within a few layered WS2 sheets is believed to enhance both the mechanical strength and stability of the specimen apart from the introduction of semi-metallicity needed for desired applications.
- Open Access
- 1 January 2025
- Published by IOP Publishing in Materials Research Express
- Vol. 12 (1) , 016101
Large magnetocaloric effect in free-standing Gd2O3 nanostructures near liquid helium boiling point
Magnetic and magnetocaloric properties of free-standing gadolinium oxide (Gd2O3) nanostructures have been studied. Nanoparticles of Gd2O3 (Gd2O3-NP), nanorods of Gd2O3 (Gd2O3-NR) and a mixed system of Gd2O3 nanosheets and nanorods (Gd2O3-NS+NR) have been prepared by template-free methods without the use of any surfactant or a catalyst. These samples crystallize in cubic crystal structure (space group Ia-3, no. 206, cI80). Magnetization data indicate typical paramagnetic behavior in the temperature range of 300 K to 5 K for all the samples. All three Gd2O3 nanostructures display large magnetocaloric effect at temperatures below ∼10 K. While the maximum isothermal magnetic entropy change (ΔSm) value at 6 K is about −22.6 Jkg−1K−1 for the Gd2O3 nanorods and −17.8 Jkg−1K−1 for Gd2O3 nanoparticles for a magnetic field change of 70 kOe, the mixed Gd2O3 nanosheets and nanorods system prepared by wet chemical method shows a maximum ΔSm value of −23.6 Jkg−1K−1 for the same field change. These are about 41% to 89% more than that of bulk Gd2O3. Therefore, Gd2O3-based nanostructures could be very useful for low temperature magnetic refrigeration applications.
- 1 January 2025
- Published by IOP Publishing in Materials Research Express
- Vol. 12 (1) , 016101
Open AccessLarge magnetocaloric effect in free-standing Gd2O3 nanostructures near liquid helium boiling point
Magnetic and magnetocaloric properties of free-standing gadolinium oxide (Gd2O3) nanostructures have been studied. Nanoparticles of Gd2O3 (Gd2O3-NP), nanorods of Gd2O3 (Gd2O3-NR) and a mixed system of Gd2O3 nanosheets and nanorods (Gd2O3-NS+NR) have been prepared by template-free methods without the use of any surfactant or a catalyst. These samples crystallize in cubic crystal structure (space group Ia-3, no. 206, cI80). Magnetization data indicate typical paramagnetic behavior in the temperature range of 300 K to 5 K for all the samples. All three Gd2O3 nanostructures display large magnetocaloric effect at temperatures below ∼10 K. While the maximum isothermal magnetic entropy change (ΔSm) value at 6 K is about −22.6 Jkg−1K−1 for the Gd2O3 nanorods and −17.8 Jkg−1K−1 for Gd2O3 nanoparticles for a magnetic field change of 70 kOe, the mixed Gd2O3 nanosheets and nanorods system prepared by wet chemical method shows a maximum ΔSm value of −23.6 Jkg−1K−1 for the same field change. These are about 41% to 89% more than that of bulk Gd2O3. Therefore, Gd2O3-based nanostructures could be very useful for low temperature magnetic refrigeration applications.
- 17 December 2024
- Published by Elsevier in Microchemical Journal
- Vol. 208
Enhanced and efficient electrochemical detection of IgG by UiO-66 metal organic framework (MOF) upon 60 MeV N5+ swift ion irradiation
- 17 December 2024
- Published by Elsevier in Microchemical Journal
- Vol. 208
Enhanced and efficient electrochemical detection of IgG by UiO-66 metal organic framework (MOF) upon 60 MeV N5+ swift ion irradiation
- 9 December 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (6) , 3331-3340
Enhancing the optoelectronic properties of SnS via mixed-phase heterostructure engineering
SnS holds great promise in optoelectronics, especially in photovoltaic devices, due to its exceptional intrinsic electronic properties and optimal optical absorption. However, its prospective applications are often limited by structural instability or oxidation, leading to internal or external defect states. This study proposes a mixed-phase SnS/h-BN heterostructure to enhance chemical and thermal stability while preserving the intrinsic optoelectronic properties of SnS. High negative binding energy and ab initio molecular dynamics simulations confirm the structural and thermal stability of the heterostructure up to 600 K. The heterostructure exhibits a type-I band alignment with an indirect density functional theory (DFT) band gap of 1.38 eV, corrected to 2.20 eV using Green's function with screened Coulomb potential (GW) calculations. The vertical intralayer electric field, resulting from non-uniformity in charge dynamics within the heterostructure, influences the SnS bound excitons, causing reduction in their binding energies. The weakly bound excitons indicate effective charge separation, charge transport augmentation, and a prolonged recombination lifetime. The interface effectively combines the excellent light-harvesting capabilities of SnS with the remarkable stability of h-BN, retaining the desirable optoelectronic properties of SnS while offering enhanced charge transport and stability.
- 9 December 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (6) , 3331-3340
Enhancing the optoelectronic properties of SnS via mixed-phase heterostructure engineering
SnS holds great promise in optoelectronics, especially in photovoltaic devices, due to its exceptional intrinsic electronic properties and optimal optical absorption. However, its prospective applications are often limited by structural instability or oxidation, leading to internal or external defect states. This study proposes a mixed-phase SnS/h-BN heterostructure to enhance chemical and thermal stability while preserving the intrinsic optoelectronic properties of SnS. High negative binding energy and ab initio molecular dynamics simulations confirm the structural and thermal stability of the heterostructure up to 600 K. The heterostructure exhibits a type-I band alignment with an indirect density functional theory (DFT) band gap of 1.38 eV, corrected to 2.20 eV using Green's function with screened Coulomb potential (GW) calculations. The vertical intralayer electric field, resulting from non-uniformity in charge dynamics within the heterostructure, influences the SnS bound excitons, causing reduction in their binding energies. The weakly bound excitons indicate effective charge separation, charge transport augmentation, and a prolonged recombination lifetime. The interface effectively combines the excellent light-harvesting capabilities of SnS with the remarkable stability of h-BN, retaining the desirable optoelectronic properties of SnS while offering enhanced charge transport and stability.
- 21 September 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (05)
Exfoliated layered nanosheets of orthorhombic SnS, subjected to 90 MeV carbon ion irradiation
Derived through liquid phase exfoliation, the irradiation response of nanoscale, exfoliated tin sulfide (SnS) systems are being reported in this work. The SnS nanosheets were exposed to 90[ ]MeV [ ] ion beams across fluences ranging from [ ] to [ ][ ]ions/cm2. With an electronic energy loss ([ ]) of [ ]56[ ]eV/Å, dominating over the nuclear energy loss ([ ]), the average crystallite size of the irradiated samples displayed an augment when compared to its pristine counterpart. Exhibiting an orthorhombic crystal structure, structural analyses of both pristine and irradiated samples were conducted via X-ray diffraction (XRD) technique. Raman analysis has manifested some modifications in the SnS nanosystem upon radiation exposure, particularly with higher fluences causing local structural disorder and amorphization of the material. Moreover, morphological changes in the irradiated SnS samples were examined using field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM), with AFM images revealing an increase in the root mean square (RMS) roughness corresponding to ion fluence. Furthermore, swift heavy ion (SHI) irradiation prompted a non-rectifying Ohmic [ ] characteristics and altered the electrical conductivity of the SnS nanosheets.
- 21 September 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (05)
Exfoliated layered nanosheets of orthorhombic SnS, subjected to 90 MeV carbon ion irradiation
Derived through liquid phase exfoliation, the irradiation response of nanoscale, exfoliated tin sulfide (SnS) systems are being reported in this work. The SnS nanosheets were exposed to 90[ ]MeV [ ] ion beams across fluences ranging from [ ] to [ ][ ]ions/cm2. With an electronic energy loss ([ ]) of [ ]56[ ]eV/Å, dominating over the nuclear energy loss ([ ]), the average crystallite size of the irradiated samples displayed an augment when compared to its pristine counterpart. Exhibiting an orthorhombic crystal structure, structural analyses of both pristine and irradiated samples were conducted via X-ray diffraction (XRD) technique. Raman analysis has manifested some modifications in the SnS nanosystem upon radiation exposure, particularly with higher fluences causing local structural disorder and amorphization of the material. Moreover, morphological changes in the irradiated SnS samples were examined using field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM), with AFM images revealing an increase in the root mean square (RMS) roughness corresponding to ion fluence. Furthermore, swift heavy ion (SHI) irradiation prompted a non-rectifying Ohmic [ ] characteristics and altered the electrical conductivity of the SnS nanosheets.