RPRongkun Pan

Rongkun Pan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rongkun Pan has a total of 53 co-authors. Here are the top co-authors by number of shared publications:

  • Hailin Jia

    School of Safety Science and Engineering, Henan Polytechnic University

    6 shared publications
  • Cong Li

    School of Safety Science & Engineering, Henan Polytechnic University, Jiaozuo 454003, China

    5 shared publications
  • Jiangkun Chao

    School of Safety Science & Engineering, Henan Polytechnic University, Jiaozuo 454003, China

    5 shared publications
  • Dong Fu

    Henan Polytechnic University

    4 shared publications
  • Daimin Hu

    School of Safety Science & Engineering, Henan Polytechnic University, Jiaozuo 454003, China

    3 shared publications
  • Lei Chen

    Department of Safety & Science Engineering; Henan Polytechnic University; Jiaozuo China

    3 shared publications

Latest Publications

  • Open Access

    Experimental Study on the Fire Hazard of Flat-Laid Rooftop Photovoltaic Systems Under Localized External Fire Exposure: Implications for High-Rise Building Applications

    by Lihong Zhao, Ping Fang, Songtao Liu, Shiyao Liu, Xu Zhang, Xiaolin Yang, Rongkun Pan, Yonghao Mao

    As rooftop photovoltaic (PV) systems are increasingly deployed on taller buildings and across a wider range of building applications, localized overheating or initial fires caused by electrical faults, combustible roof-covering materials, or maintenance-related ignition sources may affect PV modules and contribute to subsequent fire spread over the rooftop system. In this study, a full-scale fire experiment was conducted on a flat-laid rooftop PV system using a nominal 100 kW n-heptane pan fire as a controlled localized external fire source to investigate the fire development and escalation mechanism of the system. The results show that the fire hazard was first and primarily concentrated in the confined under-panel space: the average cavity peak temperature of the ignited array reached 684.0 °C, with a local maximum of 853.4 °C, both significantly higher than the maximum upper-surface center temperature of 370.7 °C. The involvement of the waterproofing membrane in combustion was the key amplifying mechanism driving the transition from localized heating to a sustained high-temperature event; the average cavity temperature exceeded 500 °C after 234 s and remained above this threshold for approximately 201 s, with an average cavity heat accumulation index of 178.1 × 103 °C·s. Compared with the lower upper-surface center measuring points, hazardous temperatures beneath the modules were reached earlier by 149, 193 and 247 s at the thresholds of 50, 100 and 200 °C, respectively. Under the tested configuration, these findings provide engineering insights for fire-risk identification, early monitoring, and fire-safe design of flat-laid rooftop PV systems in high-rise building applications.

  • Study on flame instability of low-hydrogen syngas in a vertical tube

    by Hongjun Jian, Rongkun Pan, Jiayin Shan, Xiaoping Wen, Jun Song, Wenlong Zhang, Hailin Jia, Zhidong Guo

    1. As global demand for clean energy continues to grow, syngas, as a potential clean fuel, plays an important role in energy transition and pollution reduction. Syngas is mainly composed of CO and ...

  • Study on the Mechanical and Energy Evolution Characteristics of Oxidized Coal

    by Rongkun Pan, Ruirui Yu, Jiangkun Chao, Hailin Jia, Jian Wang, Cong Li

    To study the variation laws of the mechanical properties of coal with different oxidation degrees, coal samples were subjected to constant temperature oxidation at 80°C, 120°C, 160°C and 200°C by using a coal oxidation spontaneous combustion test system. Through a uniaxial compression experiment, the variation laws of mechanical parameters, failure characteristics and energy dissipation law of coals with different oxidation degrees were analyzed and obtained. The study shows that the stress – strain curves of coal with different oxidation degrees vary in different stages. The peak stress, elastic modulus, secant modulus and Poisson’s ratio appear to decrease to different degrees with the deepening of oxidation, and the peak strain increases. The cracks on the surface of the coal samples increase and become more with the deepening of oxidation, the exothermic characteristics of the coal samples decrease, and the failure characteristics of the coal samples change from single shear-type failure characteristic to conjugate shear-type characteristic and then to shatter-type failure characteristic. With an increasing degree of oxidation, the total energy required for coal destruction gradually decreases, the conversion rate of total energy into elastic energy decreases, the dissipation energy gradually increases, and the release rate of elastic energy and the increase rate of dissipation energy gradually slow down after the peak strain.

  • Heat Release Characteristics of L-Malic Acid Inhibited-Coal Oxidation

    by Rongkun Pan, Yang Li, Jiangkun Chao, Hailin Jia, Jian Wang

    Transition metal ions in coal can catalyze the oxidation of coal, reduce the activation energy of the coal-oxygen reaction, and promote spontaneous combustion. Adding a metal chelating agent to coal can form chelates with metal ions so that the metal ions lose their catalysis. A green metal chelating agent, L-malic acid (L-MA), was proposed in this study. A C600 microcalorimeter was used to study the inhibitory effect of L-MA on spontaneous coal combustion. The results show that under the same temperature-programmed conditions, the heat absorption capacity of coal treated with L-MA solution is higher than that of raw coal, but the heat release capacity of treated coal is lower. With increase in the concentration of the L-MA solution, the inhibitory effect first increased and then decreased. The maximum heat flow of raw coal is 292 mW, and the maximum heat flow of coal samples treated with malic acid is 246 mW, 237 mW, 232 mW, 240 mW and 255 mW, respectively. The maximum heat flow of 15 wt% coal sample is 20.55% lower than that of raw coal. Based on the thermal analysis, kinetic theory, and experimental data, the activation energy of each coal sample can be calculated. The activation energy of raw coal is the lowest, and the activation energy of each group first increases and then decreases with increasing L-MA concentration, which is in agreement with the law of heat flow data. Combined with the microscopic process of coal oxidation at different temperature stages, the mechanism of L-MA inhibiting spontaneous coal combustion was explored. In summary, L-MA can effectively reduce the concentration of related free radicals in the chain reaction of spontaneous coal combustion and inhibit spontaneous coal combustion.


  • Analysis of the Coal Spontaneous Combustion Risk Space Evolution in the Goaf Under Ventilation and Extraction Coupling

    by Rongkun Pan, Xiaohuan Wang, Jiangkun Chao, Hailin Jia, Hedi Shen

    The risk of coal spontaneous combustion in goaf is one of the disasters in coal mining, ventilation and extraction often aggravate air leakage from the goaf. Due to the unclear rule of expansion law and air leakage, the risk space for coal spontaneous combustion continues to occur. To investigate the influence of ventilation and extraction on the evolution of the risk space of coal spontaneous combustion (CSC) in goaf, further reveal the characteristics of air leakage and extraction in goaf and obtain the expansion law of CSC risk space. A three-dimensional model of goaf under surface drilling and gas extraction was developed. Using FLUENT numerical simulation software, taking a coal mine in Anhui Province, this study analyzes the influence factors, evolution law, and influence characteristics of CSC through field observations and numerical simulation. The research indicates that ventilation keeps the risk space of CSC expanding. The extraction of single drilling showed a local space expansion, while the extraction of double drilling shows the overall space expansion of the goaf. The air leakage flow path in goaf, air flow velocity vector in working face, gas concentration loss, and gas extraction characteristic parameters are determined. The loss of air leakage along the working surface meets four-stage: “strong in – flow - mixed flow – steady inflow – sudden outflow.” It can be determined that the extraction intensity of single drilling should be greater than 34.8 m3/min, and the double drilling should be greater than 18.7 m3/min. The relationship between the coupling influence of ventilation and extraction and the expansion law of CSC risk space is determined, and the maximum risk space width of CSC can be predicted. The research results are of guiding significance for CSC prevention and gas efficient extraction.


  • Influence of a High-Temperature Environment in Deep Mining on the Characteristics of Coal Spontaneous Combustion

    by Jiangkun Chao, Qiuyue Gu, Rongkun Pan, Xuefeng Han, Daimin Hu, Wei Liu, Shuang Liu

    As coal mining continues to progress to deeper levels, the temperature of the coal and rock continues to rise, causing coal spontaneous combustion disasters to become increasingly prominent. This paper studies the spontaneous combustion characteristics of coal in a high temperature environment before and after coal seam mining. The results were as follows: 1) Before mining, under the action of a constant ground temperature, the deep coal seam continuously and slowly released heat, and the higher the ground temperature was, the more heat was released. 2) During mining, after air entered, the coal samples initially maintained the continuous slow heat release. With the continuous entry of air, the coal samples were in an endothermic state. Higher ground temperature provides favorable conditions for coal sample heat absorption and coal spontaneous combustion. 3) When the local temperature rises, the associated hydroxyl groups in the coal sample are gradually activated and become free hydroxyl groups that are more prone to chemical reactions; the methyl groups are destroyed to generate more methylene groups; the aromatic hydrocarbons change significantly after oxygen supply. The long-term high ground temperature environment could lead to an increase in the chemical activity of coal.


  • Constructing fibrous-like skeleton by simulated sea mud to improve three-phase foam for stability and fire-extinguishing performance

    by Baoyong Zhang, Yifeng Qin, Hedi Shen, Huiyuan Meng, Jiarui Cui, Rongkun Pan

    Combining the three-phase foam and simulated sea mud particle (SM-P: simulated sea mud particle) containing inert substances (SMTP: simulated sea mud three-phase foam) to engineer a new three-phase foam fire extinguishing material was a viable strategy to solve the problem of coal mine spontaneous combustion prevention and insufficient stability of mine fire extinguishing materials. Herein, based on constant temperature heating table and simulated coal spontaneous combustion fire extinguishing device, the experiments were conducted to evaluate the material properties. As expected, the SMTP-20 exhibited excellent stability (73.00 mins at 40 °C), which was 2.19 times that of ordinary three-phase foam (34.33 mins at 40 °C). The introduction of SM-P can also effectively reduce the thermal decomposition of powdered coal, the corresponding temperature of thermal decomposition peak value of raw coal was delayed 17.78 °C. The SMTP-20 could construct a thin fibrous-like foam layer with SM-P to cover the surface of burning coal and effectively seal cracks in the coal from oxygen contact, thereby preventing coal further oxidation. This work not only offers a new three-phase foam with outstanding performance, but also unravels a strategy for preparing three-phase foam with high stability and good fire extinguishing effect. Graphical Abstract


  • The Effects of Thermal-mechanical Coupling on the Thermal Stability of Coal

    by Jiangkun Chao, Rongkun Pan, Xuefeng Han, Hongyan Ma, Tian Qiu, Daimin Hu

    As the depth of coal mining continues to increase, the weight of the overlying strata and the ground stress on the residual coal in goaves also increase. At the same time, the temperature of the coal rocks continues to rise, and the high ground temperature environment of the mining and heading faces becomes more severe. As a result, coal oxidation and spontaneous combustion disasters become more prominent. In this work, an anaerobic heating experiment of coal under the thermal-mechanical coupling effect was performed. The effects of thermal-mechanical coupling on the thermal stability of coal were studied by analyzing parameters such as the heat flow peak temperature, endothermic peak value, heat absorption, and activation energy. The results showed that the heat flow peak temperature exhibited hysteresis as the initial temperature and the initial stress increased. At the same time, the endothermic heat flow peak value and the heat absorption decreased. Under the same initial stress, the activation energy gradually decreased as the initial temperature of the coal sample increased; the higher the initial stress, the lower the decrease in the activation energy. At the same initial temperature, the activation energy first increased and then decreased as the initial stress increased; the higher the initial temperature, the more sensitive this change in the activation energy was to stress. In this study, the influence of thermal-mechanical coupling on the thermal stability of coal was obtained. This work provides on-site guidance for the prevention and control of spontaneous coal combustion in deep mining.


  • Experimental study on the effects of chemical composite additive on the microscopic characteristics of spontaneous combustion coal

    by Rongkun Pan, Junwei Ma, Ligang Zheng, Jian Wang

    In order to study the effects of chemical composite additive (CCA) on the microscopic characteristics of spontaneous combustion coal, atomic force microscope and Fourier transform infrared spectroscopy technology were used to study the microstructure and active groups of spontaneous combustion coal. The roughness, three-dimensional surface morphology, microscopic pore structure, infrared spectrum, and active group content of raw coal samples and coal samples treated with water or different concentrations of CCA were analyzed. The experimental results showed that compared with the raw coal, the roughness Rq and Ra of the CCA-treated coal samples decreased with increasing CCA concentration, and the surface topography of the microscopic structure tended to be flat and smooth, and the size becomes smaller and the depth becomes shallow of pore. In the raw coal samples and coal samples treated with water and CCA, the main types of active groups remained constant. However, the contents of these groups changed, and the order of the contents of main types of active groups is water-treated > raw coal (untreated) > CCA-1% treated > CCA-5% treated > CCA-10% treated > CCA-20% treated. In addition, the mechanism of the CCA inhibition of coal spontaneous combustion was discussed and analyzed.