Yousef Ramezani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yousef Ramezani has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Nazeri Tahroudi
Lorestan University, Khorramabad, Islamic Republic of Iran
19 shared publications - Rasoul Mirabbasi
Department of Water Engineering, Faculty of Agriculture, Shahrekord University, Shahrekord, Iran
9 shared publications - Carlo De Michele
Department of Civil and Environmental Engineering, Politecnico di Milano, Milan, Italy
7 shared publications Carlo De Michele
Department of Civil and Environmental Engineering, Politecnico di Milano, Milan, Italy
5 shared publications- Farshad Ahmadi
Department of Hydrology and Water Resources, Faculty of Water and Environmental Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
3 shared publications Rasoul Mirabbasi
3 shared publications
Latest Publications
- 23 June 2025
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 11 (4) , 1-14
Integrating vector and copula-based models with conditional heteroskedasticity for enhanced suspended sediment load simulation
- 23 June 2025
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 11 (4) , 1-14
Integrating vector and copula-based models with conditional heteroskedasticity for enhanced suspended sediment load simulation
- 28 May 2025
- Published by Springer Nature in Acta Geophysica
- Vol. 73 (5) , 4903-4918
Evaluating the impact of climate change on precipitation in the future period using CMIP6 models (case study: Siminehrood River Basin, Iran)
- 28 May 2025
- Published by Springer Nature in Acta Geophysica
- Vol. 73 (5) , 4903-4918
Evaluating the impact of climate change on precipitation in the future period using CMIP6 models (case study: Siminehrood River Basin, Iran)
- Open Access
- 9 August 2024
- Published by Springer Nature in Applied Water Science
- Vol. 14 (9) , 1-17
Toward coupling of nonlinear support vector regression and crowd intelligence optimization algorithms in estimation of suspended sediment load
- 9 August 2024
- Published by Springer Nature in Applied Water Science
- Vol. 14 (9) , 1-17
Open AccessToward coupling of nonlinear support vector regression and crowd intelligence optimization algorithms in estimation of suspended sediment load
- 30 January 2024
- Published by Elsevier in Probabilistic Engineering Mechanics
- Vol. 75
Wind speed monitoring using entropy theory and a copula-based approach
- 30 January 2024
- Published by Elsevier in Probabilistic Engineering Mechanics
- Vol. 75
Wind speed monitoring using entropy theory and a copula-based approach
- Open Access
- 5 June 2023
- Published by Universidad Nacional Autonoma de Mexico in Atmósfera
- Vol. 37, 501-514
Application of vine copulas to estimate dew point temperature
In this study, the accuracy of the copula-based model in the simulation of the dew point temperature in various climates of Iran was investigated, using simulations based on vine copulas such as C-, D-, and R-vine copulas. By examining the various vine copulas and their tree sequences, the best copula and best tree sequence based on AIC, BIC, and log-likelihood were selected. The results show that based on the complete similarity in our case between C-, D- and R-vine copulas, the selected best C-vine copulas fit well the dependence between the minimum and maximum air temperatures and dew point temperature. The simulation results were analyzed using root mean square error (RMSE), Nash-Sutcliffe efficiency (NSE) coefficient, and violin plots. The results show that the copula-based model has high accuracy at all stations. The min (max) RMSE is related to Kerman (Ahvaz) station with RMSE = 0.396 oC (0.617 oC). Also, the min (max) NSE is related to Ahvaz (Urmia) station with NSE = 0.925 (0.955). Also, according to the violin plot, it is possible to appreciate the acceptable certainty of the copula-based model. Due to the diversity of the tree sequences of vine copulas and the use of the rotated states of the internal vine copulas, as well as the possibility of interfering with the effective parameters in high dimensions, the simulation results are reliable and have no restrictions. This model can be used as the best model to estimate dew point temperature due to the full coverage of the range of changes in data.
- 5 June 2023
- Published by Universidad Nacional Autonoma de Mexico in Atmósfera
- Vol. 37, 501-514
Open AccessApplication of vine copulas to estimate dew point temperature
In this study, the accuracy of the copula-based model in the simulation of the dew point temperature in various climates of Iran was investigated, using simulations based on vine copulas such as C-, D-, and R-vine copulas. By examining the various vine copulas and their tree sequences, the best copula and best tree sequence based on AIC, BIC, and log-likelihood were selected. The results show that based on the complete similarity in our case between C-, D- and R-vine copulas, the selected best C-vine copulas fit well the dependence between the minimum and maximum air temperatures and dew point temperature. The simulation results were analyzed using root mean square error (RMSE), Nash-Sutcliffe efficiency (NSE) coefficient, and violin plots. The results show that the copula-based model has high accuracy at all stations. The min (max) RMSE is related to Kerman (Ahvaz) station with RMSE = 0.396 oC (0.617 oC). Also, the min (max) NSE is related to Ahvaz (Urmia) station with NSE = 0.925 (0.955). Also, according to the violin plot, it is possible to appreciate the acceptable certainty of the copula-based model. Due to the diversity of the tree sequences of vine copulas and the use of the rotated states of the internal vine copulas, as well as the possibility of interfering with the effective parameters in high dimensions, the simulation results are reliable and have no restrictions. This model can be used as the best model to estimate dew point temperature due to the full coverage of the range of changes in data.
- Open Access
- 2 February 2023
- Published by Springer Nature in Research Square
Development of the entropy theory for wind speed monitoring by using copula-based approach
The purpose of this study is to development of the entropy theory by using copula-based approach for temporal and spatial monitoring of wind speeds in the Lut Desert, Iran at Bam, Tabas and Birjand stations in the period of 1973–2020. The conventional entropy method was improved by the two methods. In the first method, vine copulas were used to evaluate the interaction between the stations. At the second method, in addition to the first method, a 2-D copula function was used to analyze the joint frequency and conditional occurrence probability. In the first method, A D-vine copula was selected to simulate the wind speed at each station according to the wind speed at the other stations. In the second method, Frank copula function was used to joint probability analysis. The results of comparing the information transfer index in the two methods and the conventional entropy method showed that the percentage increase of this index in the first method at the Bam, Birjand and Tabas stations compared to the conventional entropy method is 25, 0 and 23%, respectively. This increase in the second method compared to the conventional entropy method at the mentioned stations is 24, 10 and 33%, respectively.
- 2 February 2023
- Published by Springer Nature in Research Square
Open AccessDevelopment of the entropy theory for wind speed monitoring by using copula-based approach
The purpose of this study is to development of the entropy theory by using copula-based approach for temporal and spatial monitoring of wind speeds in the Lut Desert, Iran at Bam, Tabas and Birjand stations in the period of 1973–2020. The conventional entropy method was improved by the two methods. In the first method, vine copulas were used to evaluate the interaction between the stations. At the second method, in addition to the first method, a 2-D copula function was used to analyze the joint frequency and conditional occurrence probability. In the first method, A D-vine copula was selected to simulate the wind speed at each station according to the wind speed at the other stations. In the second method, Frank copula function was used to joint probability analysis. The results of comparing the information transfer index in the two methods and the conventional entropy method showed that the percentage increase of this index in the first method at the Bam, Birjand and Tabas stations compared to the conventional entropy method is 25, 0 and 23%, respectively. This increase in the second method compared to the conventional entropy method at the mentioned stations is 24, 10 and 33%, respectively.
- 4 January 2023
- Published by Springer Nature in Theoretical and Applied Climatology
- Vol. 151 (3-4) , 1239-1255
Application of copula-based and ARCH-based models in storm prediction
- 4 January 2023
- Published by Springer Nature in Theoretical and Applied Climatology
- Vol. 151 (3-4) , 1239-1255
Application of copula-based and ARCH-based models in storm prediction
- 1 November 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydrologic Engineering
- Vol. 27 (11) , 05022015
Application of Copula Functions for Bivariate Analysis of Rainfall and River Flow Deficiencies in the Siminehrood River Basin, Iran
In this study, the frequency analysis of river flow deficiency (FD) of the Siminehrood River in the south of Lake Urmia located in northwest Iran was investigated with regard to rainfall deficiency (RD) during the period of 1992–2013 using copula functions. The main purpose of this study is to provide a comprehensive method for bivariate simulation and forecasting based on marginal distribution and joint behavior of the studied series. For this purpose, the FD and RD values were extracted using the deficiency value method. By preparing deficiency values, 57 different distribution functions were fitted to the studied values, and the generalized extreme value (GEV) distribution was selected as the best marginal distribution function based on the evaluation criteria. Before fitting the copula function, the correlation between the RD and FD values was examined using Kendall’s tau, and a correlation of 70% was obtained. After selecting the marginal distribution function and examining the correlation, the goodness of fit of seven different copula functions was examined for frequency analysis of RD and FD values in the Siminehrood River at the Dashband station. The results indicated that the Clayton copula had the best performance for creating a joint distribution of RD and FD values. It was also determined from the joint analysis of deficiency values that the FD values can be estimated with high accuracy for RD values of more than 0.68 mm. Also, the results indicated that if rainfall in the study area were less than long-term mean for 10-day and 60-day durations, with different return periods and probabilities, different conditions will occur for FD values, which can be used as typical curves for water resources management and allocation in the basin. Finally, the accuracy of the copula-based model and its conditional density in the two phases of simulation and forecasting were investigated. The accuracy of the copula-based model and its conditional density in the simulation phase was confirmed [ , root mean square error , and nash-sutcliffe efficiency ]. In the forecasting phase, the forecasting equation based on the proposed method had a RMSE of and NSE of 0.89. By using the violin plot, the model certainty was also confirmed. According to the proposed equation, FD values can be forecasted affected by RD values for 10-day duration with high certainty and accuracy. In this paper, a method for forecasting and simulation of meteorological and hydrological parameters is presented that considers two parameters simultaneously. This study discusses meteorology and hydrology from a different perspective. Given the current climate change, this study uses deficiency values. The proposed forecasting method provides regional results that can be used in the water resources management in each basin specifically. By implementing this method, it is easy to forecast the desired values in the basin with different probabilities and return periods. In this study, river flow deficiency (FD) affected by rainfall deficiency (RD) can be forecasted. The difference between the proposed method and other methods and models of simulation and forecasting is in the connection of two variables with each other, which makes the results more certain and reliable. This method can be used in the field of basin management and water resources allocation and also water resources monitoring.- 1 November 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydrologic Engineering
- Vol. 27 (11) , 05022015
Application of Copula Functions for Bivariate Analysis of Rainfall and River Flow Deficiencies in the Siminehrood River Basin, Iran
In this study, the frequency analysis of river flow deficiency (FD) of the Siminehrood River in the south of Lake Urmia located in northwest Iran was investigated with regard to rainfall deficiency (RD) during the period of 1992–2013 using copula functions. The main purpose of this study is to provide a comprehensive method for bivariate simulation and forecasting based on marginal distribution and joint behavior of the studied series. For this purpose, the FD and RD values were extracted using the deficiency value method. By preparing deficiency values, 57 different distribution functions were fitted to the studied values, and the generalized extreme value (GEV) distribution was selected as the best marginal distribution function based on the evaluation criteria. Before fitting the copula function, the correlation between the RD and FD values was examined using Kendall’s tau, and a correlation of 70% was obtained. After selecting the marginal distribution function and examining the correlation, the goodness of fit of seven different copula functions was examined for frequency analysis of RD and FD values in the Siminehrood River at the Dashband station. The results indicated that the Clayton copula had the best performance for creating a joint distribution of RD and FD values. It was also determined from the joint analysis of deficiency values that the FD values can be estimated with high accuracy for RD values of more than 0.68 mm. Also, the results indicated that if rainfall in the study area were less than long-term mean for 10-day and 60-day durations, with different return periods and probabilities, different conditions will occur for FD values, which can be used as typical curves for water resources management and allocation in the basin. Finally, the accuracy of the copula-based model and its conditional density in the two phases of simulation and forecasting were investigated. The accuracy of the copula-based model and its conditional density in the simulation phase was confirmed [ , root mean square error , and nash-sutcliffe efficiency ]. In the forecasting phase, the forecasting equation based on the proposed method had a RMSE of and NSE of 0.89. By using the violin plot, the model certainty was also confirmed. According to the proposed equation, FD values can be forecasted affected by RD values for 10-day duration with high certainty and accuracy. In this paper, a method for forecasting and simulation of meteorological and hydrological parameters is presented that considers two parameters simultaneously. This study discusses meteorology and hydrology from a different perspective. Given the current climate change, this study uses deficiency values. The proposed forecasting method provides regional results that can be used in the water resources management in each basin specifically. By implementing this method, it is easy to forecast the desired values in the basin with different probabilities and return periods. In this study, river flow deficiency (FD) affected by rainfall deficiency (RD) can be forecasted. The difference between the proposed method and other methods and models of simulation and forecasting is in the connection of two variables with each other, which makes the results more certain and reliable. This method can be used in the field of basin management and water resources allocation and also water resources monitoring.- 1 September 2022
- Published by Springer Nature in Acta Geophysica
- Vol. 71 (1) , 489-501
Joint frequency analysis of river flow rate and suspended sediment load using conditional density of copula functions
- 1 September 2022
- Published by Springer Nature in Acta Geophysica
- Vol. 71 (1) , 489-501
Joint frequency analysis of river flow rate and suspended sediment load using conditional density of copula functions
- 22 June 2022
- Published by Wiley in International Journal of Climatology
- Vol. 43 (1) , 240-254
Application of copula‐based approach as a new data‐driven model for downscaling the mean daily temperature
Downscaling and simulating various meteorological variables at different time scales are fundamental topics for making climate change studies in a geographic region. Here, a new approach for downscaling the mean daily temperature was implemented using a vine copula‐based approach and considering the best CanESM2 predictors. The accuracy of the copula‐based approach was compared with genetic programming (GP), optimized support vector regression (OSVR), support vector machine (SVM), adaptive neuro‐fuzzy inference system (ANFIS) and artificial neural network (ANN) models at Birjand synoptic station in Iran. In the proposed approach, after examining the different vine copulas, the D‐vine copula was selected as the best copula according to the evaluation statistics and tree sequences. According to the root‐mean‐square error (RMSE) and Nash–Sutcliff efficiency (NSE), the accuracy of the ANN model in downscaling the mean daily temperature data was not acceptable and the other considered models were slightly overestimated. The results indicated that the copula‐based approach outperformed the other models in downscaling the mean daily temperature with NSE = 0.61. However, given the 99% confidence interval of the simulations, a slightly overestimation at temperatures above 20°C was observed for the copula‐based approach, which has better performance than the other considered models. The copula‐based approach was able to reduce RMSE by about 82, 20, 24, 47 and 34% compared to ANN, OSVR, GP, SVM and ANFIS models, respectively. The results also showed that the performance of the support vector regression model optimized by the ant colony algorithm is also acceptable and is in the second rank after the copula‐based approach. The accuracy of the copula‐based approach was also confirmed according to Taylor diagram and violin plot. The proposed approach has a higher accuracy than data‐driven models due to use of the conditional density of vine copulas, and the joint distribution of the mean daily temperature and selected predictors.
- 22 June 2022
- Published by Wiley in International Journal of Climatology
- Vol. 43 (1) , 240-254
Application of copula‐based approach as a new data‐driven model for downscaling the mean daily temperature
Downscaling and simulating various meteorological variables at different time scales are fundamental topics for making climate change studies in a geographic region. Here, a new approach for downscaling the mean daily temperature was implemented using a vine copula‐based approach and considering the best CanESM2 predictors. The accuracy of the copula‐based approach was compared with genetic programming (GP), optimized support vector regression (OSVR), support vector machine (SVM), adaptive neuro‐fuzzy inference system (ANFIS) and artificial neural network (ANN) models at Birjand synoptic station in Iran. In the proposed approach, after examining the different vine copulas, the D‐vine copula was selected as the best copula according to the evaluation statistics and tree sequences. According to the root‐mean‐square error (RMSE) and Nash–Sutcliff efficiency (NSE), the accuracy of the ANN model in downscaling the mean daily temperature data was not acceptable and the other considered models were slightly overestimated. The results indicated that the copula‐based approach outperformed the other models in downscaling the mean daily temperature with NSE = 0.61. However, given the 99% confidence interval of the simulations, a slightly overestimation at temperatures above 20°C was observed for the copula‐based approach, which has better performance than the other considered models. The copula‐based approach was able to reduce RMSE by about 82, 20, 24, 47 and 34% compared to ANN, OSVR, GP, SVM and ANFIS models, respectively. The results also showed that the performance of the support vector regression model optimized by the ant colony algorithm is also acceptable and is in the second rank after the copula‐based approach. The accuracy of the copula‐based approach was also confirmed according to Taylor diagram and violin plot. The proposed approach has a higher accuracy than data‐driven models due to use of the conditional density of vine copulas, and the joint distribution of the mean daily temperature and selected predictors.