Patrick Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Patrick Yang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Carmenn Ooi
3 shared publications- Damon Economy Turney
The CUNY Energy Institute, The City College of New York, City University of New York, Steinman Hall, 160 Convent Avenue, New York, NY 10031, USA
3 shared publications Sanjoy Banerjee
The CUNY Energy Institute, The City College of New York, City University of New York, Steinman Hall, 160 Convent Avenue, New York, NY 10031, USA
3 shared publications- Stephen O'Brien
Ph.D. Program in Chemistry, The Graduate Center of the City University of New York, 365 Fifth Avenue, New York, New York 10016, USA
3 shared publications - Timothy Norman Lambert
Department of Photovoltaics and Materials Technology, Sandia National Laboratories, Albuquerque, NM 87185, USA
3 shared publications Xiaojun Chan
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in EES Batteries
- Vol. 2 (5) , 1622-1643
Unraveling the Cycling and Failure Mechanisms of Alkaline Rechargeable Calcium Zincate (CaZn₂(OH)₆·2H₂O) Batteries
Calcium zincate (CaZn₂(OH)₆·2H₂O, CaZn) has been increasingly investigated as an additive and/or replacement for zinc (Zn) or zinc oxide (ZnO) alkaline electrodes. Here we investigate the cycling and failure mechanism...
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in EES Batteries
- Vol. 2 (5) , 1622-1643
Open AccessUnraveling the Cycling and Failure Mechanisms of Alkaline Rechargeable Calcium Zincate (CaZn₂(OH)₆·2H₂O) Batteries
Calcium zincate (CaZn₂(OH)₆·2H₂O, CaZn) has been increasingly investigated as an additive and/or replacement for zinc (Zn) or zinc oxide (ZnO) alkaline electrodes. Here we investigate the cycling and failure mechanism...
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (9) , 1434
Investigation of Alkaline Zinc Anode Performance with Increasing Addition of Calcium Zincate (Ca[Zn(OH)3]2·2H2o) Under Industrially Relevant Conditions
There is a need for safe, affordable, low cost, and reliable grid scale energy storage as the world transitions from fossil fuels towards intermittent renewable sources of energy. Metallic zinc (Zn) anodes are investigated and produced industrially for anodes for primary and rechargeable Zn batteries due to their high theoretical capacity, relative abundance, non-toxic, and non-flammable nature. Zn in alkaline electrolytes have poor reversibility at high Zn utilization due to passivation, shape change/redistribution, dendrite formation, hydrogen evolution, and the crossover of zincate ion (Zn(OH)4 2−) into the cathode. Zinc oxide (ZnO) anodes with additives such as calcium hydroxide (Ca(OH)2) have shown improvements on cyclability compared to metallic Zn anodes due to the in-situ formation of lower solubility calcium zincate (CaZn, (Ca[Zn(OH)3]2·2H2O)). Ex-situ synthesized CaZn has been cycled vs nickel under alkaline conditions showing great improvement in cyclability but to be economically feasible, it must be paired with MnO2 cathodes. Due to a charge in balance between the discharged CaZn and charged MnO2, practical anode recipes will include a higher percentage of charged Zn to prevent the requirement of additional formation steps. To understand how CaZn could be incorporated into commercial alkaline Zn/MnO2 batteries, anode formulations with increasing CaZn (0%, 30%, 70%, 100%) in mixtures with metallic Zn are investigated in 20 wt% KOH along with minor additions of Bi2O3, acetylene carbon, and CTAB surfactant. The total molar zinc content is normalized; thus, electrode capacity is kept comparable, resulting in electrodes relevant to real world use cases. At high 50% Zn utilization, pure CaZn anodes achieved ~280 cycles while Zn anodes achieved ~50 cycles, a five-time improvement in cycle life resulting in four times cost reduction per cycle. Not only do we compare cyclability of the different formulations but also compare the different failure mechanisms of the majority Zn with CaZn vs a pure CaZn anode to understand why there is an increase in the cycling performance. Acknowledgement: This work was supported by the U.S. Department of Energy Office of Electricity. Dr. Imre Gyuk, Director of Energy Storage Research at the U.S. Department of Energy Office of Electricity, is thanked for his financial support of this project. This work was performed, in part, at the Center for Integrated Nanotechnologies, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science. The views expressed in this article do not necessarily represent the views of the U.S. Department of Energy or the United States Government. This article has been authored by an employee of National Technology & Engineering Solutions of Sandia, LLC under Contract No. DE-NA0003525 with the U.S. Department of Energy (DOE). The National Technology & Engineering Solutions of Sandia, LLC employee owns all right, title and interest to their contribution to the article and is responsible for its contents. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this article or allow others to do so, for United States Government purposes. The DOE will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (9) , 1434
Investigation of Alkaline Zinc Anode Performance with Increasing Addition of Calcium Zincate (Ca[Zn(OH)3]2·2H2o) Under Industrially Relevant Conditions
There is a need for safe, affordable, low cost, and reliable grid scale energy storage as the world transitions from fossil fuels towards intermittent renewable sources of energy. Metallic zinc (Zn) anodes are investigated and produced industrially for anodes for primary and rechargeable Zn batteries due to their high theoretical capacity, relative abundance, non-toxic, and non-flammable nature. Zn in alkaline electrolytes have poor reversibility at high Zn utilization due to passivation, shape change/redistribution, dendrite formation, hydrogen evolution, and the crossover of zincate ion (Zn(OH)4 2−) into the cathode. Zinc oxide (ZnO) anodes with additives such as calcium hydroxide (Ca(OH)2) have shown improvements on cyclability compared to metallic Zn anodes due to the in-situ formation of lower solubility calcium zincate (CaZn, (Ca[Zn(OH)3]2·2H2O)). Ex-situ synthesized CaZn has been cycled vs nickel under alkaline conditions showing great improvement in cyclability but to be economically feasible, it must be paired with MnO2 cathodes. Due to a charge in balance between the discharged CaZn and charged MnO2, practical anode recipes will include a higher percentage of charged Zn to prevent the requirement of additional formation steps. To understand how CaZn could be incorporated into commercial alkaline Zn/MnO2 batteries, anode formulations with increasing CaZn (0%, 30%, 70%, 100%) in mixtures with metallic Zn are investigated in 20 wt% KOH along with minor additions of Bi2O3, acetylene carbon, and CTAB surfactant. The total molar zinc content is normalized; thus, electrode capacity is kept comparable, resulting in electrodes relevant to real world use cases. At high 50% Zn utilization, pure CaZn anodes achieved ~280 cycles while Zn anodes achieved ~50 cycles, a five-time improvement in cycle life resulting in four times cost reduction per cycle. Not only do we compare cyclability of the different formulations but also compare the different failure mechanisms of the majority Zn with CaZn vs a pure CaZn anode to understand why there is an increase in the cycling performance. Acknowledgement: This work was supported by the U.S. Department of Energy Office of Electricity. Dr. Imre Gyuk, Director of Energy Storage Research at the U.S. Department of Energy Office of Electricity, is thanked for his financial support of this project. This work was performed, in part, at the Center for Integrated Nanotechnologies, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science. The views expressed in this article do not necessarily represent the views of the U.S. Department of Energy or the United States Government. This article has been authored by an employee of National Technology & Engineering Solutions of Sandia, LLC under Contract No. DE-NA0003525 with the U.S. Department of Energy (DOE). The National Technology & Engineering Solutions of Sandia, LLC employee owns all right, title and interest to their contribution to the article and is responsible for its contents. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this article or allow others to do so, for United States Government purposes. The DOE will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan
- Open Access
- 28 May 2024
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 3 (8) , 1932-1947
Performance and failure mechanisms of alkaline zinc anodes with addition of calcium zincate (Ca[Zn(OH)3]2·2H2O) under industrially relevant conditions
Additions of calcium zincate (CaZn2(OH)6∙2H2O) to zinc (Zn) anodes in alkaline batteries have been investigated and found to remarkably increase cycle life at high utilization of the anode’s theoretical capacity, thereby significantly reducing anode costs. A spectrum of anode formulations with increasing CaZn (0%, 30%, 70%, 100%) in mixtures with metallic Zn is investigated along with minor additions of Bi2O3, acetylene carbon, and CTAB. The total molar zinc content is normalized; thus, electrode capacity is kept comparable, resulting in electrodes relevant to real world use cases. We report details of the cell design, electrolyte composition, electrode design, and cycle testing procedure, all of which are kept close to industrially relevant values. A pure CaZn anode with acetylene carbon was shown to achieve 1062 cycles at 20% Zn utilization in ZnO saturated 20 wt.% KOH whereas traditional Zn anodes only utilize 10% for similar cycle life. At high 50% Zn utilization, CaZn anodes achieved ~280 cycles while Zn anodes achieved ~50 cycles, a five-time improvement in cycle life resulting in four times cost reduction per cycle. Scanning electron microscopy analysis of cycled electrodes shows that adding CaZn reduces electrode failure by slowing down formation of a passivating zinc oxide layer at the surface of the electrode as well as decreases shape change. This appears to occur because zinc and calcium remain intimately mixed forming CaZn, which reduces dissolution and reprecipitation, but slowly will segregate as inactive materials are pushed to the surface where conductivity is lower.
- 28 May 2024
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 3 (8) , 1932-1947
Open AccessPerformance and failure mechanisms of alkaline zinc anodes with addition of calcium zincate (Ca[Zn(OH)3]2·2H2O) under industrially relevant conditions
Additions of calcium zincate (CaZn2(OH)6∙2H2O) to zinc (Zn) anodes in alkaline batteries have been investigated and found to remarkably increase cycle life at high utilization of the anode’s theoretical capacity, thereby significantly reducing anode costs. A spectrum of anode formulations with increasing CaZn (0%, 30%, 70%, 100%) in mixtures with metallic Zn is investigated along with minor additions of Bi2O3, acetylene carbon, and CTAB. The total molar zinc content is normalized; thus, electrode capacity is kept comparable, resulting in electrodes relevant to real world use cases. We report details of the cell design, electrolyte composition, electrode design, and cycle testing procedure, all of which are kept close to industrially relevant values. A pure CaZn anode with acetylene carbon was shown to achieve 1062 cycles at 20% Zn utilization in ZnO saturated 20 wt.% KOH whereas traditional Zn anodes only utilize 10% for similar cycle life. At high 50% Zn utilization, CaZn anodes achieved ~280 cycles while Zn anodes achieved ~50 cycles, a five-time improvement in cycle life resulting in four times cost reduction per cycle. Scanning electron microscopy analysis of cycled electrodes shows that adding CaZn reduces electrode failure by slowing down formation of a passivating zinc oxide layer at the surface of the electrode as well as decreases shape change. This appears to occur because zinc and calcium remain intimately mixed forming CaZn, which reduces dissolution and reprecipitation, but slowly will segregate as inactive materials are pushed to the surface where conductivity is lower.
- 1 April 2019
- Published by Elsevier in Molecular Catalysis
- Vol. 466, 19-25
Fundamental study of furfuryl alcohol dehydration reaction over molybdenum oxide catalyst
- 1 April 2019
- Published by Elsevier in Molecular Catalysis
- Vol. 466, 19-25
Fundamental study of furfuryl alcohol dehydration reaction over molybdenum oxide catalyst
- 30 June 2016
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 4 (8) , 4084-4088
Separation and Purification of Furfuryl Alcohol Monomer and Oligomers Using a Two-Phase Extracting Process
- 30 June 2016
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 4 (8) , 4084-4088
Separation and Purification of Furfuryl Alcohol Monomer and Oligomers Using a Two-Phase Extracting Process
- 1 January 2016
- Published by Elsevier in Materials Today: Proceedings
- Vol. 3 (2) , 667-671
Catalysts Loading Effect of Tungsten Oxide Catalytic Furfuryl Alcohol Oligomerization
- 1 January 2016
- Published by Elsevier in Materials Today: Proceedings
- Vol. 3 (2) , 667-671
Catalysts Loading Effect of Tungsten Oxide Catalytic Furfuryl Alcohol Oligomerization