ACAdenilcia Fernanda Grobério Calenzani

Adenilcia Fernanda Grobério Calenzani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Adenilcia Fernanda Grobério Calenzani has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Topological Optimization of Steel and Concrete Tubular-Floor Trusses Based on CO2 Emission

    by Chayana M. G. Silva, Beatriz V. Afonso, Adenílicia F. G. Calenzani, Moacir Kripka, Élcio C. Alves

    This paper addresses the topological optimization of composite floor systems, specifically focusing on tubular composite trusses with and without concrete filling in the upper chord. The optimization problem is formulated and solved using particle swarm optimization (PSO) and the Bonobo Algorithm (BO), both with CO2 emissions reduction as the objective. A comparative analysis is conducted against literature models using full-web beams, revealing a notable 20%+ reduction in total CO2 emissions for the proposed composite truss configuration. Additionally, a parametric analysis examines how various design parameters affect the optimization solution. Results indicate that the use of concrete in the upper chord has a substantial effect on reducing overall CO2 emissions, especially with concrete strengths exceeding 25 MPa. Notably, the Bonobo Algorithm outperforms PSO in finding optimal solutions for the composite floor system. The study contributes to the underexplored field of topological optimization for composite truss beams, providing valuable insights into sustainable design practices for structural engineering applications.


  • On the differences between prescriptive and calculated critical temperatures of steel elements under fire and their impact on fire protection design

    by dos Santos Marcelino, Thayná Couto, João Victor Fragoso Dias, de Azevedo, Macksuel Soares, Adenilcia Fernanda Grobério Calenzani

  • Open Access

    Optimal design for continuous composite slabs via metaheuristic algorithms

    by Mariana Oliveira Teixeira, Élcio Cassimiro Alves, Janaina Pena Soares de Oliveira Valle, Adenilcia Fernanda Grobério Calenzani

    With the increase in greenhouse gas emissions from the construction sector, pursuing more sustainable solutions has become essential. The use of composite steel-concrete slabs can considerably reduce environmental impacts due to their rapid construction and the elimination of the need for shoring. This study aims to present the optimization problem formulation for composite steel-concrete slabs, considering continuity between slabs and the addition of positive and negative reinforcement. The design constraints adhered to the provisions of Brazilian standards for composite steel and concrete structures, while Particle Swarm Optimization and Grey Wolf Optimization algorithms were employed to solve the optimization problem. A comparative analysis was conducted with solutions provided by a formwork manufacturer to assess the effectiveness of the proposed solutions and the gains achieved through the application of the formulation. The optimization algorithms yielded similar optimal solutions in most analyses, with a slight advantage for Grey Wolf Optimization in cases where distinct solutions were obtained. The manufacturer's solutions exhibited a total CO2 emission up to 54% higher than the optimal solutions. The constraints governing the optimization problem were the formation of a plastic hinge due to a negative bending moment and failure due to longitudinal shear.


  • Open Access

    Optimization of CO2 emissions of composite alveolar beams considering manufacturing constraints

    by Elcio Cassimiro Alves, Moacir Kripka, Gabrieli Fontes Silva, Adenilcia Fernanda Grobério Calenzani

    The increasing concern over the scarcity of natural resources has driven the search for more sustainable structural designs. Among the various alternatives, steel-concrete composite cellular structures have emerged as a good solution for large spans, combining the strength properties of concrete and steel without significantly increasing the structure's mass. This article presents a formulation for the optimization of steel-concrete composite cellular beams aimed at minimizing carbon dioxide (CO2) emissions. In addition to the materials used, emissions from manufacturing processes, specifically cutting and welding of profiles, are also considered. The problem was addressed using Particle Swarm Optimization (PSO) and the Grey Wolf Optimizer (GWO), and numerical examples are provided to investigate the advantages of the proposed formulation compared to steel welded beams. Among the results, it was observed that similar solutions were obtained with both optimization methods. In addition, varying the span of the beams in a range of 5 to 17.5 m, it was possible to identify structural profiles and configurations that are more efficient regarding weight and environmental impact. The best results in almost all the spans are from the Litzka beam, except for the 17.5 m span, which was the Peiner beam that had the lowest CO2 emission.


  • Open Access

    Optimum design of composite steel‐concrete beams with external prestressing

    by Kamila Madeira Fiorotti, Adenílcia Fernanda Grobério Calenzani, Élcio Cassimiro Alves

    The concept of prestressing in concrete beams and its associated calculation procedures are well-established in the literature. However, its application in composite steel-concrete beams has been increasing despite lacking a specific approach in the main design codes. In many cases, designers are required to combine available criteria for calculating steel and reinforced concrete structures. This study aimed to formulate an optimization problem and assess CO2 emissions for the optimal design of composite steel-concrete beams with external prestressing. The design variables considered in the optimization problem include the cross-section of laminated or welded profiles, slab height, characteristic compressive strength of concrete, and the number of tendons. Solutions to the optimization problem were obtained by implementing a Genetic Algorithm (GA) and Particle Swarm Optimization (PSO). The analyses included comparisons with experimental examples and optimization problems involving prestressed steel beams. Additionally, a parametric analysis across various spans was performed, allowing the identification of factors with the greatest impact on CO2 emissions. The results indicate that the chosen algorithms effectively generated solutions for the problem, with PSO generally outperforming GA. In terms of emission composition, steel was identified as the largest contributor. Furthermore, welded profiles showed better performance, allowing the omission of prestressing for spans up to 27.5 m, whereas, for laminated profiles, prestressing becomes necessary from 17.5 m. Optimal solutions were found for concrete with a compressive strength greater than 25 MPa.


  • Open Access

    A numerical study on the critical bending moment for distortional buckling of cold-formed lipped C-sections

    by Vinícius Nogueira Magalhães, Adenilcia Fernanda Groberio Calenzani, João Victor Fragoso Dias

    Applications of cold-formed profiles have become more common in the civil construction industry. In particular, the cold-formed lipped C-sections are frequently used. Mostly, these channels are submitted to bend about the major principal axis and, consequently, they get subjected to compression stresses that, due to their considerable local slenderness, can provoke instability. Particularly complex, the distortional buckling is one of those failure modes and may occur in cold-formed lipped C-sections causing translation of the edges. Thus, this article intends to evaluate theoretical design procedures, from the perspective of accuracy and implementation, when used to calculate the critical bending moment of distortional buckling. Four formulae were selected and, for comparison, two computational approaches were employed to determine, numerically, the critical moments in different lipped C-sections: the finite element method (FEM) and the finite strip method (FSM). The Hancock’s and Schafer’s formulations proved to be highly precise when confronted with the numerical data. An adapted procedure presented by AISI, based primarily on local buckling designs, showed itself imprecise, returning both unsafe and conservative results depending on the cross-section. The last one was the simplified method, also available on AISI standard, and as expected, it was conservative when predicting the distortional buckling moment. Conclusions regarding the critical moment and buckling modes with changes in geometrical parameters were also extracted. Thickness increase led the critical moment to grow, as expected, due to the reduction of local slenderness provided. Likewise, as the lip width gets larger, the critical moment rises, however the profile tends to fail by local buckling mode, evidencing the need for attention when using channels with too narrow or too wide lips.

  • Open Access

    Cost and CO2 emission optimization of steel-concrete composite floor systems with composite tubular trusses

    by Chayana Morgner Gomes da Silva, Luciano Dal Secco Silveira Amorim, Adenílcia Fernanda Grobério Calenzani, Élcio Cassimiro Alves

    The objective of this study is to propose a formulation for the topological and dimensional optimization of composite floor systems, which comprise composite trusses, while considering both the costs and environmental impacts generated due to the consumption of materials from this structural system. To address this optimization problem, the Bonobo algorithm (BO) will be employed. For the structural analysis, the bar element was implemented with 2 nodes and 3 degrees of freedom per node to obtain displacements and efforts arising from the application of the vertical actions considered (dead and live load). Structural verification will adhere to the guidelines outlined in Brazilian standards for tubular structures, steel structures and composite steel and concrete structures. The models studied address examples from the literature in order to verify and compare solutions from an economic and environmental perspectives, identifying which factors impact the final solutions found.

  • Open Access

    Multiobjective Optimization of prestressed composite steel and concrete beam via non-dominated sorting genetic algorithm (NSGA)

    by Elcio Cassimiro Cassimiro, Adenilcia Fernanda Grobério Calenzani, Sayonara Maria de Moraes Pinheiro

    The use of prestressing in steel beams and composite steel and concrete beams is still underexplored in the design of structures with large spans due to the lack of specific normative codes for this type of structural element. Studies involving optimization techniques for these types of structures are scarce in the literature, thus opening up a vast field of research to be explored. This study aims to propose the formulation of a multi-objective optimization problem for composite steel and concrete beams with external prestressing. The final cost of the beams, CO2 emissions from the materials used in their fabrication, and the maximization of the payload that the beam can support are considered minimization objectives. Constraints include the requirements for composite steel and concrete elements from NBR 8800:2008 and the prestressing provisions from NBR 6118:2021. The non-dominated sorting genetic algorithm (NSGA) from the Matlab package will be used to solve the optimization problem. Examples demonstrating the solution's effectiveness will be compared with examples from the literature, and Pareto frontiers will be evaluated to verify the best solutions for the proposed problems.

  • Open Access

    The use of normative models under combined compression and bending for verification of concrete-filled steel tubes with high strength materials

    by Glaubert Araujo Miranda, Fernanda Grobério Calenzani, Walnório Graça Ferreira

    Buildings have been demanding increasingly slender pillars from projects, consequently increasing the demand for efficient and economical solutions. One of the solutions adopted is the use of high-strength concrete and steel and the optimization of sections for filled mixed tubular pillars, which has been widespread in European, American, and Asian countries; however, there is little application in Brazil's constructions. Verification of mixed pillars under flexo-compression can be done by simplified methods or analytical methods such as the method of deformation compatibility. The draft revision of ABNT NBR 8800:2023 introduces three simplified calculation models for flexo-compression verification, with limitations in its application for concrete with characteristic compression strength below 50 MPa and steel profile with yield strength below 450 MPa, as well as proposing polygonal lines to trace interaction curves. In this article, the simplified calculation models from the draft revision of ABNT NBR 8800:2023 are compared with experimental results from the literature of prototypes of circular tubular filled mixed pillar sections with concrete strength above 50 MPa and steel profile with yield strength above 450 MPa. For this purpose, a computational tool was developed in MATLAB that traces the interaction curves of the draft revision project of ABNT NBR 8800:2023. The suitability and conservatism of simplified methods were verified when using high-strength materials outside the normative range.

  • Reducing the environmental impact of prestressed composite beams via SABO algorithm

    by Élcio Cassimiro Alves, Kamila Madeira Fiorotti, Adenilcia Fernanda Grobério Calenzani