Longfei Niu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Longfei Niu has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Guorui Zhou
Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China
6 shared publications - Xinxiang Miao
Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, P. R. China
6 shared publications Guorui Zhou
4 shared publicationsHai Zhou
Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China
4 shared publications- Haibing Lü
Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China
4 shared publications Xinxiang Miao
Research Center of Laser Fusion, China Academy of Engineering Physics 2 , Mianyang 621900
4 shared publications
Latest Publications
- Open Access
- 3 June 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (21)
Axial heterogeneity in low-frequency nonthermal plasma: Pump-induced flow asymmetries on electron–ion transport dynamics
The spatial distribution characteristics and large-aperture surface treatment capability of low-pressure non-thermal plasma have garnered significant attention. Consequently, there has been a concerted effort to enhance the performance of these systems with the aim of broadening their applicability across a range of fields. This study systematically investigates the spatial distribution of 50–60 Hz low-pressure non-thermal plasma using Langmuir probe diagnostics, with controlled power (50–200 W) and pressure (10–50 Pa) conditions. Key findings reveal that reducing chamber pressure and increasing discharge power synergistically enhance electron density, electron temperature, and plasma density, directly governing plasma reactivity and surface treatment efficacy. Axial profiles demonstrate a characteristic rise and fall in the electron density within the chamber, with electron current density scaling proportionally to electron density and inversely to electron temperature. Ion and ion current density exhibit distinct non-monotonic profiles, decreasing initially before rising toward the exhaust port (30 cm). The electron temperature at the exhaust port increases significantly and surpasses that at the front window (0 cm), indicating combined effects of boundary conditions and flow field acceleration. At 30 cm, ion density declines more rapidly than electron density due to ions' higher mass and lower velocity, making them more susceptible to flow perturbations. Moreover, the simultaneous reduction in the ion density and increase in the ion current density correlate with enhanced ion velocity. These observations conclusively demonstrate that flow field asymmetry drives plasma spatial heterogeneity.
- 3 June 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (21)
Open AccessAxial heterogeneity in low-frequency nonthermal plasma: Pump-induced flow asymmetries on electron–ion transport dynamics
The spatial distribution characteristics and large-aperture surface treatment capability of low-pressure non-thermal plasma have garnered significant attention. Consequently, there has been a concerted effort to enhance the performance of these systems with the aim of broadening their applicability across a range of fields. This study systematically investigates the spatial distribution of 50–60 Hz low-pressure non-thermal plasma using Langmuir probe diagnostics, with controlled power (50–200 W) and pressure (10–50 Pa) conditions. Key findings reveal that reducing chamber pressure and increasing discharge power synergistically enhance electron density, electron temperature, and plasma density, directly governing plasma reactivity and surface treatment efficacy. Axial profiles demonstrate a characteristic rise and fall in the electron density within the chamber, with electron current density scaling proportionally to electron density and inversely to electron temperature. Ion and ion current density exhibit distinct non-monotonic profiles, decreasing initially before rising toward the exhaust port (30 cm). The electron temperature at the exhaust port increases significantly and surpasses that at the front window (0 cm), indicating combined effects of boundary conditions and flow field acceleration. At 30 cm, ion density declines more rapidly than electron density due to ions' higher mass and lower velocity, making them more susceptible to flow perturbations. Moreover, the simultaneous reduction in the ion density and increase in the ion current density correlate with enhanced ion velocity. These observations conclusively demonstrate that flow field asymmetry drives plasma spatial heterogeneity.
- Open Access
The Characterization of Laser-Induced Particles Generated from Aluminum Alloy in High Power Laser Facility
Aerosol particle contamination in high-power laser facilities has become a major cause of internal optical component damage resistance and service life reduction. In general, contaminating particles primarily originate from stray light; therefore, it is crucial to investigate the mechanism and dynamics of the dynamic contaminating particle generation to control the cleanliness level. In this study, corresponding research was conducted on experiments and theory. We investigated the particle generation and surface composition modification under the action of a laser. We employed various surface analytical methods to identify the possible variations in the aluminum alloy surface during laser irradiations. A theoretical model for particle ejection from aluminum alloy surfaces was established by taking the adhesion force and laser cleaning force (due to thermal expansion) into account. The results show that the threshold energies for contamination particle generation and damage are around 0.1 and 0.2 J/cm2, respectively. Subsurface impurities are the primary source of particles, and particle adhesion density is related to surface roughness. Pollution particle generation and splashing processes include temperature increases, phase changes, impact diffusion, and adhesion. The results provide a reference for the normal operation of high-energy laser systems. The results also suggest that the laser irradiation pretreatment of aluminum alloy surfaces is essential to improve the cleanliness level.
Open AccessThe Characterization of Laser-Induced Particles Generated from Aluminum Alloy in High Power Laser Facility
Aerosol particle contamination in high-power laser facilities has become a major cause of internal optical component damage resistance and service life reduction. In general, contaminating particles primarily originate from stray light; therefore, it is crucial to investigate the mechanism and dynamics of the dynamic contaminating particle generation to control the cleanliness level. In this study, corresponding research was conducted on experiments and theory. We investigated the particle generation and surface composition modification under the action of a laser. We employed various surface analytical methods to identify the possible variations in the aluminum alloy surface during laser irradiations. A theoretical model for particle ejection from aluminum alloy surfaces was established by taking the adhesion force and laser cleaning force (due to thermal expansion) into account. The results show that the threshold energies for contamination particle generation and damage are around 0.1 and 0.2 J/cm2, respectively. Subsurface impurities are the primary source of particles, and particle adhesion density is related to surface roughness. Pollution particle generation and splashing processes include temperature increases, phase changes, impact diffusion, and adhesion. The results provide a reference for the normal operation of high-energy laser systems. The results also suggest that the laser irradiation pretreatment of aluminum alloy surfaces is essential to improve the cleanliness level.
- Open Access
A Novel Airborne Molecular Contaminants Sensor Based on Sagnac Microfiber Structure
The impact of airborne molecular contaminants (AMCs) on the lifetime of fused silica UV optics in high power lasers (HPLs) is a critical issue. In this work, we demonstrated the on-line monitoring method of AMCs concentration based on the Sagnac microfiber structure. In the experiment, a Sagnac microfiber loop with mesoporous silica coating was fabricated by the microheater brushing technique and dip coating. The physical absorption of AMCs in the mesoporous coating results in modification of the surrounding refractive index (RI). By monitoring the spectral shift in the wavelength domain, the proposed structure can operate as an AMCs concentration sensor. The sensitivity of the AMCs sensor can achieve 0.11 nm (mg/m3). By evaluating the gas discharge characteristic of four different low volatilization greases in a coarse vacuum environment, we demonstrated the feasibility of the proposed sensors. The use of these sensors was shown to be very promising for meeting the requirements of detecting trace amounts of contaminants.
Open AccessA Novel Airborne Molecular Contaminants Sensor Based on Sagnac Microfiber Structure
The impact of airborne molecular contaminants (AMCs) on the lifetime of fused silica UV optics in high power lasers (HPLs) is a critical issue. In this work, we demonstrated the on-line monitoring method of AMCs concentration based on the Sagnac microfiber structure. In the experiment, a Sagnac microfiber loop with mesoporous silica coating was fabricated by the microheater brushing technique and dip coating. The physical absorption of AMCs in the mesoporous coating results in modification of the surrounding refractive index (RI). By monitoring the spectral shift in the wavelength domain, the proposed structure can operate as an AMCs concentration sensor. The sensitivity of the AMCs sensor can achieve 0.11 nm (mg/m3). By evaluating the gas discharge characteristic of four different low volatilization greases in a coarse vacuum environment, we demonstrated the feasibility of the proposed sensors. The use of these sensors was shown to be very promising for meeting the requirements of detecting trace amounts of contaminants.
- Open Access
An Ultra-Sensitive Multi-Functional Optical Micro/Nanofiber Based on Stretchable Encapsulation
Stretchable optical fiber sensors (SOFSs), which are promising and ultra-sensitive next-generation sensors, have achieved prominent success in applications including health monitoring, robotics, and biological–electronic interfaces. Here, we report an ultra-sensitive multi-functional optical micro/nanofiber embedded with a flexible polydimethylsiloxane (PDMS) membrane, which is compatible with wearable optical sensors. Based on the effect of a strong evanescent field, the as-fabricated SOFS is highly sensitive to strain, achieving high sensitivity with a peak gauge factor of 450. In addition, considering the large negative thermo-optic coefficient of PDMS, temperature measurements in the range of 30 to 60 °C were realized, resulting in a 0.02 dBm/°C response. In addition, wide-range detection of humidity was demonstrated by a peak sensitivity of 0.5 dB/% RH, with less than 10% variation at each humidity stage. The robust sensing performance, together with the flexibility, enables the real-time monitoring of pulse, body temperature, and respiration. This as-fabricated SOFS provides significant potential for the practical application of wearable healthcare sensors.
Open AccessAn Ultra-Sensitive Multi-Functional Optical Micro/Nanofiber Based on Stretchable Encapsulation
Stretchable optical fiber sensors (SOFSs), which are promising and ultra-sensitive next-generation sensors, have achieved prominent success in applications including health monitoring, robotics, and biological–electronic interfaces. Here, we report an ultra-sensitive multi-functional optical micro/nanofiber embedded with a flexible polydimethylsiloxane (PDMS) membrane, which is compatible with wearable optical sensors. Based on the effect of a strong evanescent field, the as-fabricated SOFS is highly sensitive to strain, achieving high sensitivity with a peak gauge factor of 450. In addition, considering the large negative thermo-optic coefficient of PDMS, temperature measurements in the range of 30 to 60 °C were realized, resulting in a 0.02 dBm/°C response. In addition, wide-range detection of humidity was demonstrated by a peak sensitivity of 0.5 dB/% RH, with less than 10% variation at each humidity stage. The robust sensing performance, together with the flexibility, enables the real-time monitoring of pulse, body temperature, and respiration. This as-fabricated SOFS provides significant potential for the practical application of wearable healthcare sensors.
- Open Access
- 11 June 2020
- Published by Wiley in Journal of Chemistry
- Vol. 2020, 1-6
A Low-Cost High-Temperature Sensor Based on Long-Period Fiber/Microfiber Gratings by Local Fictive Temperature Modification
A high temperature-sensitive long-period fiber grating (LPFG) sensor fabricated by the local fictive temperature modification is proposed and demonstrated. High-frequency CO2 laser pulses scan standard single-mode fiber (SMF), and the modification zones extended to the core of SMF. Experimental results demonstrate that the LPFG temperature sensors with 600 μm grating period and 32 period numbers offer the average sensitivity of 0.084 nm/C in the temperature range of room temperature (RM) to 875°C. The LPFGs fabricated here show exponential change in terms of the spectral wavelength shift versus changes in temperature. In addition, the maximum temperature sensitivity of 0.37 nm/C is achieved by employing long-period microfiber grating (LPMFG), fabricated by the microheater brushing technique and the local fictive temperature modification. LPMFG sensor exhibits better temperature characteristics due to a thinner diameter.
- 11 June 2020
- Published by Wiley in Journal of Chemistry
- Vol. 2020, 1-6
Open AccessA Low-Cost High-Temperature Sensor Based on Long-Period Fiber/Microfiber Gratings by Local Fictive Temperature Modification
A high temperature-sensitive long-period fiber grating (LPFG) sensor fabricated by the local fictive temperature modification is proposed and demonstrated. High-frequency CO2 laser pulses scan standard single-mode fiber (SMF), and the modification zones extended to the core of SMF. Experimental results demonstrate that the LPFG temperature sensors with 600 μm grating period and 32 period numbers offer the average sensitivity of 0.084 nm/C in the temperature range of room temperature (RM) to 875°C. The LPFGs fabricated here show exponential change in terms of the spectral wavelength shift versus changes in temperature. In addition, the maximum temperature sensitivity of 0.37 nm/C is achieved by employing long-period microfiber grating (LPMFG), fabricated by the microheater brushing technique and the local fictive temperature modification. LPMFG sensor exhibits better temperature characteristics due to a thinner diameter.
- Open Access
- 1 December 2019
- Published by Elsevier in Results in Physics
- Vol. 15
Study on laser-stricken damage to alumina ceramic layer of different surface roughness
- 1 December 2019
- Published by Elsevier in Results in Physics
- Vol. 15
Open AccessStudy on laser-stricken damage to alumina ceramic layer of different surface roughness
- Open Access
- 1 April 2019
- Published by AIP Publishing in AIP Advances
- Vol. 9 (4) , 045216
Effect of magnetic-field orientation on dual-peak phenomenon of magnetoelectric coupling in Ni/PZT/Terfenol-D composites
Magnetoelectric (ME) effect in a Ni/PZT/Terfenol-D composite cantilever was tested under three different magnetic loading modes. The frequency-dependent ME effect and dual-peak phenomenon were observed in the experiment. The influence of orientations of magnetic fields on the dual-peak phenomenon of ME coupling was investigated. Magnetic field distribution inside the ME composite structure was simulated, which agrees well with experimental data. The experiment results indicate that ME coefficient versus bias magnetic field curve presents a novel dual-peak phenomenon near the resonant frequency, and the ME coefficient which depends upon the amplitude and orientation of magnetic field presents a nonlinear shift whether at the resonant frequency or not. In addition, the optimal angle corresponding to the largest ME coefficient for different bias fields were obtained. The proposed ME composites-based sensors can be used for detecting or harvesting magnetic signals of uncertain orientations and amplitudes in complex environments.
- 1 April 2019
- Published by AIP Publishing in AIP Advances
- Vol. 9 (4) , 045216
Open AccessEffect of magnetic-field orientation on dual-peak phenomenon of magnetoelectric coupling in Ni/PZT/Terfenol-D composites
Magnetoelectric (ME) effect in a Ni/PZT/Terfenol-D composite cantilever was tested under three different magnetic loading modes. The frequency-dependent ME effect and dual-peak phenomenon were observed in the experiment. The influence of orientations of magnetic fields on the dual-peak phenomenon of ME coupling was investigated. Magnetic field distribution inside the ME composite structure was simulated, which agrees well with experimental data. The experiment results indicate that ME coefficient versus bias magnetic field curve presents a novel dual-peak phenomenon near the resonant frequency, and the ME coefficient which depends upon the amplitude and orientation of magnetic field presents a nonlinear shift whether at the resonant frequency or not. In addition, the optimal angle corresponding to the largest ME coefficient for different bias fields were obtained. The proposed ME composites-based sensors can be used for detecting or harvesting magnetic signals of uncertain orientations and amplitudes in complex environments.
- 1 March 2019
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 287, 1-7
Sensing of airborne molecular contaminants based on microfiber coupler with mesoporous silica coating
- 1 March 2019
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 287, 1-7
Sensing of airborne molecular contaminants based on microfiber coupler with mesoporous silica coating
- Open Access
- 7 August 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-8
A simple all-fiber comb filter based on the combined effect of multimode interference and Mach-Zehnder interferometer
A polarization-dependent all-fiber comb filter based on a combination effect of multimode interference and Mach-Zehnder interferometer was proposed and demonstrated. The comb filter was composed with a short section of multimode fiber (MMF) fusion spliced with a conventional single mode fiber on the one side and a short section of a different type of optical fiber on the other side. The second type of optical fiber is spliced to the MMF with a properly designed misalignment. Different types and lengths of fibers were used to investigate the influence of fiber types and lengths on the performance of the comb filter. Experimentally, several comb filters with free spectral range (FSR) values ranging from 0.236 to 1.524 nm were achieved. The extinction ratio of the comb filter can be adjusted from 6 to 11.1 dB by varying polarization states of the input light, while maintaining the FSR unchanged. The proposed comb filter has the potential to be used in optical dense wavelength division multiplexing communication systems.
- 7 August 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-8
Open AccessA simple all-fiber comb filter based on the combined effect of multimode interference and Mach-Zehnder interferometer
A polarization-dependent all-fiber comb filter based on a combination effect of multimode interference and Mach-Zehnder interferometer was proposed and demonstrated. The comb filter was composed with a short section of multimode fiber (MMF) fusion spliced with a conventional single mode fiber on the one side and a short section of a different type of optical fiber on the other side. The second type of optical fiber is spliced to the MMF with a properly designed misalignment. Different types and lengths of fibers were used to investigate the influence of fiber types and lengths on the performance of the comb filter. Experimentally, several comb filters with free spectral range (FSR) values ranging from 0.236 to 1.524 nm were achieved. The extinction ratio of the comb filter can be adjusted from 6 to 11.1 dB by varying polarization states of the input light, while maintaining the FSR unchanged. The proposed comb filter has the potential to be used in optical dense wavelength division multiplexing communication systems.