Alejandro Escalona
Research Subjects
Alejandro Escalona has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Luis Alberto Rojo
Deparment of Energy Resources, University of Stavanger, 4036, Stavanger, Norway
3 shared publications - Nestor Cardozo
Department of Energy Resources, University of Stavanger, 4036 Stavanger, Norway
3 shared publications - Alina V. Mordasova
Lomonosov Moscow State University
1 shared publication - Anders Rossland
Department of Petroleum Engineering, University of Stavanger, 4036 Stavanger, Norway; present address: Suncor Energy Norge Aksjeselskap, Løkkeveien 103, 4007 Stavanger, Norway
1 shared publication - Andrés Cedeño
Department of Energy Resources, University of Stavanger, 4036 Stavanger, Norway
1 shared publication BOLIVAR Study Group
1 shared publication
Latest Publications
- 4 November 2026
- Published by Society of Exploration Geophysicists in Interpretation
ML-assisted intra-salt interpretation of the Zechstein Group in the Norwegian North Sea: Implications for salt caverns
Salt formations often consist of layered evaporite sequences (LES) with mechanically distinct lithologies, which generate complex internal structures during deformation. Interpreting these structures in seismic data is challenging because of poor imaging, discontinuous reflectors, and strong velocity contrasts. While machine learning (ML) has been increasingly applied to salt boundary detection, its potential for resolving intra-salt structures remains underexplored. This study evaluates the performance of two supervised ML tools—fault prediction and multi-horizon interpretation—across three 3D seismic surveys from the Norwegian North Sea, where the Zechstein salt ranges from bedded salt to salt pillows and diapirs. Results show that ML performance is strongly dependent on seismic image quality and the degree of deformation: bedded salt allows accurate tracking of top, base, and intra-salt horizons, whereas pillows and diapirs exhibit degraded reflector continuity and lower interpretation confidence. Fault prediction not only detects faults but highlights intra-salt discontinuities such as rotated stringers. Confidence maps provide uncertainty-aware interpretations that delineate the zones of higher risk. In the context of subsurface hydrogen storage, the ML-derived confidence maps can guide salt cavern placement and reduce geomechanical risk.
- 4 November 2026
- Published by Society of Exploration Geophysicists in Interpretation
ML-assisted intra-salt interpretation of the Zechstein Group in the Norwegian North Sea: Implications for salt caverns
Salt formations often consist of layered evaporite sequences (LES) with mechanically distinct lithologies, which generate complex internal structures during deformation. Interpreting these structures in seismic data is challenging because of poor imaging, discontinuous reflectors, and strong velocity contrasts. While machine learning (ML) has been increasingly applied to salt boundary detection, its potential for resolving intra-salt structures remains underexplored. This study evaluates the performance of two supervised ML tools—fault prediction and multi-horizon interpretation—across three 3D seismic surveys from the Norwegian North Sea, where the Zechstein salt ranges from bedded salt to salt pillows and diapirs. Results show that ML performance is strongly dependent on seismic image quality and the degree of deformation: bedded salt allows accurate tracking of top, base, and intra-salt horizons, whereas pillows and diapirs exhibit degraded reflector continuity and lower interpretation confidence. Fault prediction not only detects faults but highlights intra-salt discontinuities such as rotated stringers. Confidence maps provide uncertainty-aware interpretations that delineate the zones of higher risk. In the context of subsurface hydrogen storage, the ML-derived confidence maps can guide salt cavern placement and reduce geomechanical risk.
- Open Access
- 31 May 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (11) , 2872
Holistic 3D Model of an Urban Area in Norway: An Integration of Geophysical, Geotechnical, Remote Sensing, and Geological Methods
Understanding the distribution and characterization of natural and non-natural materials on the surface and near-subsurface is important for the development of infrastructure projects. This may be a challenge in highly urbanized areas, where outcrops are scarce, and anthropogenic activities have altered the morphological expression of the landscape. This study tests the integration of ground-penetrating radar (GPR), borehole drilling, aerial imagery, geological mapping, and aerial laser scanning as complementary mapping tools for determining the stratigraphy of glacial and post-glacial Quaternary sediments, the depth to the bedrock, and the distribution of anthropogenic material in Mosvatnet, a lake in Stavanger, Norway. The integration proved to be efficient and enabled the generation of a 3D holistic model, which provided a broad understanding of the subsurface geology and the induced anthropogenic changes in the area through time. Bedrock, till, fluvioglacial, and lacustrine geological units were modeled. Accumulations of post-glacial organic matter were mapped, and the distribution of non-natural infill material was determined. The interpreted dataset suggests that the eastern shoreline of Mosvatnet has artificially prograded about one hundred meters westward since the 1930s and the elevation of the corresponding area has increased by about ten meters relative to the lake level.
- 31 May 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (11) , 2872
Open AccessHolistic 3D Model of an Urban Area in Norway: An Integration of Geophysical, Geotechnical, Remote Sensing, and Geological Methods
Understanding the distribution and characterization of natural and non-natural materials on the surface and near-subsurface is important for the development of infrastructure projects. This may be a challenge in highly urbanized areas, where outcrops are scarce, and anthropogenic activities have altered the morphological expression of the landscape. This study tests the integration of ground-penetrating radar (GPR), borehole drilling, aerial imagery, geological mapping, and aerial laser scanning as complementary mapping tools for determining the stratigraphy of glacial and post-glacial Quaternary sediments, the depth to the bedrock, and the distribution of anthropogenic material in Mosvatnet, a lake in Stavanger, Norway. The integration proved to be efficient and enabled the generation of a 3D holistic model, which provided a broad understanding of the subsurface geology and the induced anthropogenic changes in the area through time. Bedrock, till, fluvioglacial, and lacustrine geological units were modeled. Accumulations of post-glacial organic matter were mapped, and the distribution of non-natural infill material was determined. The interpreted dataset suggests that the eastern shoreline of Mosvatnet has artificially prograded about one hundred meters westward since the 1930s and the elevation of the corresponding area has increased by about ten meters relative to the lake level.
- 1 December 2020
- Published by Elsevier in Journal of Structural Geology
- Vol. 141, 104193
Salt tectonics in salt-bearing rift basins: Progradational loading vs extension
- 1 December 2020
- Published by Elsevier in Journal of Structural Geology
- Vol. 141, 104193
Salt tectonics in salt-bearing rift basins: Progradational loading vs extension
- Open Access
- 17 July 2019
- Published by MDPI AG in Geosciences
- Vol. 9 (7) , 316
The Impact of Salt Tectonics on the Thermal Evolution and the Petroleum System of Confined Rift Basins: Insights from Basin Modeling of the Nordkapp Basin, Norwegian Barents Sea
Although the thermal effect of large salt tongues and allochthonous salt sheets in passive margins is described in the literature, little is known about the thermal effect of salt structures in confined rift basins where sub-vertical, closely spaced salt diapirs may affect the thermal evolution and petroleum system of the basin. In this study, we combine 2D structural restorations with thermal modeling to investigate the dynamic history of salt movement and its thermal effect in the Nordkapp Basin, a confined salt-bearing basin in the Norwegian Barents Sea. Two sections, one across the central sub-basin and another across the eastern sub-basin, are modeled. The central sub-basin shows deeply rooted, narrow and closely spaced diapirs, while the eastern sub-basin contains a shallower rooted, wide, isolated diapir. Variations through time in stratigraphy (source rocks), structures (salt diapirs and minibasins), and thermal boundary conditions (basal heat flow and sediment-water interface temperatures) are considered in the model. Present-day bottom hole temperatures and vitrinite data provide validation of the model. The modeling results in the eastern sub-basin show a strong but laterally limited thermal anomaly associated with the massive diapir, where temperatures in the diapir are 70 °C cooler than in the adjacent minibasins. In the central sub-basin, the thermal anomalies of closely-spaced diapirs mutually interfere and induce a combined anomaly that reduces the temperature in the minibasins by up to 50 °C with respect to the platform areas. Consequently, source rock maturation in the areas thermally affected by the diapirs is retarded, and the hydrocarbon generation window is expanded. Although subject to uncertainties in the model input parameters, these results demonstrate new exploration concepts (e.g., deep hydrocarbon kitchens) that are important for evaluating the prospectivity of the Nordkapp Basin and similar basins around the world.
- 17 July 2019
- Published by MDPI AG in Geosciences
- Vol. 9 (7) , 316
Open AccessThe Impact of Salt Tectonics on the Thermal Evolution and the Petroleum System of Confined Rift Basins: Insights from Basin Modeling of the Nordkapp Basin, Norwegian Barents Sea
Although the thermal effect of large salt tongues and allochthonous salt sheets in passive margins is described in the literature, little is known about the thermal effect of salt structures in confined rift basins where sub-vertical, closely spaced salt diapirs may affect the thermal evolution and petroleum system of the basin. In this study, we combine 2D structural restorations with thermal modeling to investigate the dynamic history of salt movement and its thermal effect in the Nordkapp Basin, a confined salt-bearing basin in the Norwegian Barents Sea. Two sections, one across the central sub-basin and another across the eastern sub-basin, are modeled. The central sub-basin shows deeply rooted, narrow and closely spaced diapirs, while the eastern sub-basin contains a shallower rooted, wide, isolated diapir. Variations through time in stratigraphy (source rocks), structures (salt diapirs and minibasins), and thermal boundary conditions (basal heat flow and sediment-water interface temperatures) are considered in the model. Present-day bottom hole temperatures and vitrinite data provide validation of the model. The modeling results in the eastern sub-basin show a strong but laterally limited thermal anomaly associated with the massive diapir, where temperatures in the diapir are 70 °C cooler than in the adjacent minibasins. In the central sub-basin, the thermal anomalies of closely-spaced diapirs mutually interfere and induce a combined anomaly that reduces the temperature in the minibasins by up to 50 °C with respect to the platform areas. Consequently, source rock maturation in the areas thermally affected by the diapirs is retarded, and the hydrocarbon generation window is expanded. Although subject to uncertainties in the model input parameters, these results demonstrate new exploration concepts (e.g., deep hydrocarbon kitchens) that are important for evaluating the prospectivity of the Nordkapp Basin and similar basins around the world.
- 1 August 2018
- Published by Elsevier in Marine and Petroleum Geology
- Vol. 95, 82-99
Impact of fault evolution in Gilbert-type fan deltas in the Evrostini area, south-central Gulf of Corinth, Greece
- 1 August 2018
- Published by Elsevier in Marine and Petroleum Geology
- Vol. 95, 82-99
Impact of fault evolution in Gilbert-type fan deltas in the Evrostini area, south-central Gulf of Corinth, Greece
- 1 July 2018
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 102 (7) , 1239-1272
Controls on minibasin infill in the Nordkapp Basin: Evidence of complex Triassic synsedimentary deposition influenced by salt tectonics
The Nordkapp Basin is a northeast-trending upper Paleozoic rift basin located in the western Barents Sea. The presence of salt structures makes this basin of interest for hydrocarbon exploration. Nevertheless, no commercial discoveries have been made so far, and the basin remains poorly understood in terms of distribution of reservoirs and source rocks within its salt minibasins. In this study, a three-dimensional data set together with well data in a small area located in the southwestern subbasin of the Nordkapp Basin has been studied, with the main purpose of obtaining a better understanding of salt kinematics and minibasin infill, with special focus on the Triassic. The minibasin infill of the Nordkapp Basin has been subdivided into five second-order sequences, which mark the main regional events recorded in the Barents Sea. Further subdivision into third-order sequences has been made in the Triassic in response to the local halokinetic movements of the basin. In terms of salt kinematics, the Nordkapp minibasins have been affected by the following: (1) late Permian–Early Triassic minor salt mobilization, (2) latest Early Triassic reactive diapirism, (3) Early to Middle Triassic transition between reactive–passive diapirism, (4) Middle Triassic–Jurassic passive diapirism, (5) Late Jurassic–Early Cretaceous gravity gliding, and (6) Cenozoic regional contraction. The rapid changes in depositional environment observed in well 7228/7-1A, together with the large variability of seismic responses and reflection terminations, provide evidence of a complex Triassic paleogeography controlled by salt tectonics. Early to Middle Triassic differential loading of minibasins into the underlying salt formed broad diapir-induced highs, which might have acted as local sources of sediment for submarine debris flows and fan deltas developed adjacent to salt structures. During the Middle Triassic–Jurassic last stage of passive growth, salt diapirs formed local topographic highs covered by ephemeral roofs and caused narrow areas of deformation widths less than 1 km (3281 ft), developing composite halokinetic sequences. In minibasins, salt evacuations and associated subsidence controlled the spatial transgressive–regressive trends of fluviodeltaic systems coming from the southeast of the Barents Shelf. Rapidly subsiding minibasins were flooded by marine conditions, and intervals of organic-rich source rocks might have been deposited in salt withdrawal-related depressions. As subsidence decreased, newly developed regressive sequences of northwest-trending fluviodeltaic systems sourced from the southeast covered previous marine environments, possibly depositing potential fluviodeltaic reservoirs within the salt minibasins.
- 1 July 2018
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 102 (7) , 1239-1272
Controls on minibasin infill in the Nordkapp Basin: Evidence of complex Triassic synsedimentary deposition influenced by salt tectonics
The Nordkapp Basin is a northeast-trending upper Paleozoic rift basin located in the western Barents Sea. The presence of salt structures makes this basin of interest for hydrocarbon exploration. Nevertheless, no commercial discoveries have been made so far, and the basin remains poorly understood in terms of distribution of reservoirs and source rocks within its salt minibasins. In this study, a three-dimensional data set together with well data in a small area located in the southwestern subbasin of the Nordkapp Basin has been studied, with the main purpose of obtaining a better understanding of salt kinematics and minibasin infill, with special focus on the Triassic. The minibasin infill of the Nordkapp Basin has been subdivided into five second-order sequences, which mark the main regional events recorded in the Barents Sea. Further subdivision into third-order sequences has been made in the Triassic in response to the local halokinetic movements of the basin. In terms of salt kinematics, the Nordkapp minibasins have been affected by the following: (1) late Permian–Early Triassic minor salt mobilization, (2) latest Early Triassic reactive diapirism, (3) Early to Middle Triassic transition between reactive–passive diapirism, (4) Middle Triassic–Jurassic passive diapirism, (5) Late Jurassic–Early Cretaceous gravity gliding, and (6) Cenozoic regional contraction. The rapid changes in depositional environment observed in well 7228/7-1A, together with the large variability of seismic responses and reflection terminations, provide evidence of a complex Triassic paleogeography controlled by salt tectonics. Early to Middle Triassic differential loading of minibasins into the underlying salt formed broad diapir-induced highs, which might have acted as local sources of sediment for submarine debris flows and fan deltas developed adjacent to salt structures. During the Middle Triassic–Jurassic last stage of passive growth, salt diapirs formed local topographic highs covered by ephemeral roofs and caused narrow areas of deformation widths less than 1 km (3281 ft), developing composite halokinetic sequences. In minibasins, salt evacuations and associated subsidence controlled the spatial transgressive–regressive trends of fluviodeltaic systems coming from the southeast of the Barents Shelf. Rapidly subsiding minibasins were flooded by marine conditions, and intervals of organic-rich source rocks might have been deposited in salt withdrawal-related depressions. As subsidence decreased, newly developed regressive sequences of northwest-trending fluviodeltaic systems sourced from the southeast covered previous marine environments, possibly depositing potential fluviodeltaic reservoirs within the salt minibasins.
- 1 November 2017
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 82 (6) , N51-N60
Frequency-dependent velocity analysis and offset-dependent low-frequency amplitude anomalies from hydrocarbon-bearing reservoirs in the southern North Sea, Norwegian sector
Our aim was to identify some of the characteristics of low-frequency anomalies. Specifically, we have looked, in 3D broadband data from the North Sea, for any offset dependence in these anomalies and any frequency-related change in normal moveout (NMO) velocity that could influence stacking power over different frequencies. After high-resolution spectral decomposition, two types of low-frequency anomaly have been identified associated with hydrocarbon-bearing reservoirs: (1) at the reservoir top and (2) below the reservoir, with a time delay of approximately 100–200 ms. Both types of anomalies indicate offset dependence. On the near-offset stacks, they are relatively strong, but they tend to be absent on the far-offset stacks. In addition, horizon velocity analysis, which was performed along the horizons picked at the tops of reservoir and nonreservoir intervals, has revealed frequency-dependent NMO velocity. For nonreservoir events, we found no significant difference between the NMO velocities for the low-frequency and high-frequency filtered common-midpoint gathers. However, along the anomalously low-frequency events observed at the tops of, and below, oil-bearing reservoirs, lower velocity is observed for low-frequency and higher velocity for high-frequency filtered gathers. If these properties turn out to be universally typical, increased understanding and inclusion of them could lead to improved workflows and help increase the reliability of low-frequency analysis as a hydrocarbon indicator.
- 1 November 2017
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 82 (6) , N51-N60
Frequency-dependent velocity analysis and offset-dependent low-frequency amplitude anomalies from hydrocarbon-bearing reservoirs in the southern North Sea, Norwegian sector
Our aim was to identify some of the characteristics of low-frequency anomalies. Specifically, we have looked, in 3D broadband data from the North Sea, for any offset dependence in these anomalies and any frequency-related change in normal moveout (NMO) velocity that could influence stacking power over different frequencies. After high-resolution spectral decomposition, two types of low-frequency anomaly have been identified associated with hydrocarbon-bearing reservoirs: (1) at the reservoir top and (2) below the reservoir, with a time delay of approximately 100–200 ms. Both types of anomalies indicate offset dependence. On the near-offset stacks, they are relatively strong, but they tend to be absent on the far-offset stacks. In addition, horizon velocity analysis, which was performed along the horizons picked at the tops of reservoir and nonreservoir intervals, has revealed frequency-dependent NMO velocity. For nonreservoir events, we found no significant difference between the NMO velocities for the low-frequency and high-frequency filtered common-midpoint gathers. However, along the anomalously low-frequency events observed at the tops of, and below, oil-bearing reservoirs, lower velocity is observed for low-frequency and higher velocity for high-frequency filtered gathers. If these properties turn out to be universally typical, increased understanding and inclusion of them could lead to improved workflows and help increase the reliability of low-frequency analysis as a hydrocarbon indicator.
- 1 September 2017
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 101 (9) , 1487-1517
Sequence stratigraphy and lateral variability of Lower Cretaceous clinoforms in the southwestern Barents Sea
An extensive seismic database covering an area of 100,000 km2 (38,610 mi2) and 16 wells are integrated to define a sequence-stratigraphic framework for the Lower Cretaceous succession in the southwestern Barents Sea. Seven sequences (S0–S6) are defined, and the geometry, trajectory, and lateral variability of decompacted seismic clinoforms are described to elucidate the depositional history of the basin and to better understand coarse-grained sediment transport from the shelf to basin. Three different clinoform scales are recognized: (1) clinoform sets with 35–60 m (115–197 ft) height, interpreted as deltaic or shoreline clinoforms; (2) clinoform sets with 60–110 m (197–361 ft) height, interpreted as sediments prograding on a continental shelf; and (3) clinoforms with greater than 150 m (>492 ft) height, which represent shelf-margin clinoforms. Furthermore, clinoforms are grouped into two main progradation directions: (1) clinoforms prograded to the southeast in sequences 2–3, in the Fingerdjupet Subbasin and the western Bjarmeland platform, indicating a source of sediments located in the west-northwestern Barents Sea, and (2) clinoforms prograded to the southwest in sequences 1–6, in the eastern part of the Bjarmeland platform, Nordkapp Basin, and Finnmark platform, indicating a second source of sediments located in the east-northeast. Additionally, in the Hammerfest Basin, clinoforms prograded to the southeast off the Loppa high in sequences 5–6. Low-relief (35–60 m [115–197 ft]), high-gradient, and oblique clinoforms are observed within sequence 2 in the western Bjarmeland platform. The high-gradient foresets are interpreted as potential coarse-grained deposits or as a result of clinoforms prograding to progressive deeper waters, resulting in steeper foresets. Clinoforms located in the eastern part of the study area are interpreted as sourced by a mud-rich system, reflecting a long transportation distance. However, thin, heterolithic patterns in the gamma-ray log possibly reflect thin, sheetlike sands. The height of the clinoforms seems to be a factor controlling the sediment bypass to deep water in the study area. When the height is more than 200 m (656 ft), bottomset deposits are common. This study contributes to a better understanding of the paleogeography and the evolution of the frontier southwestern Barents Sea during the Early Cretaceous and to comprehending the variables increasing the bypass of coarse-grained sediments to deep-water settings.
- 1 September 2017
- Published by American Association of Petroleum Geologists AAPG/Datapages in AAPG Bulletin
- Vol. 101 (9) , 1487-1517
Sequence stratigraphy and lateral variability of Lower Cretaceous clinoforms in the southwestern Barents Sea
An extensive seismic database covering an area of 100,000 km2 (38,610 mi2) and 16 wells are integrated to define a sequence-stratigraphic framework for the Lower Cretaceous succession in the southwestern Barents Sea. Seven sequences (S0–S6) are defined, and the geometry, trajectory, and lateral variability of decompacted seismic clinoforms are described to elucidate the depositional history of the basin and to better understand coarse-grained sediment transport from the shelf to basin. Three different clinoform scales are recognized: (1) clinoform sets with 35–60 m (115–197 ft) height, interpreted as deltaic or shoreline clinoforms; (2) clinoform sets with 60–110 m (197–361 ft) height, interpreted as sediments prograding on a continental shelf; and (3) clinoforms with greater than 150 m (>492 ft) height, which represent shelf-margin clinoforms. Furthermore, clinoforms are grouped into two main progradation directions: (1) clinoforms prograded to the southeast in sequences 2–3, in the Fingerdjupet Subbasin and the western Bjarmeland platform, indicating a source of sediments located in the west-northwestern Barents Sea, and (2) clinoforms prograded to the southwest in sequences 1–6, in the eastern part of the Bjarmeland platform, Nordkapp Basin, and Finnmark platform, indicating a second source of sediments located in the east-northeast. Additionally, in the Hammerfest Basin, clinoforms prograded to the southeast off the Loppa high in sequences 5–6. Low-relief (35–60 m [115–197 ft]), high-gradient, and oblique clinoforms are observed within sequence 2 in the western Bjarmeland platform. The high-gradient foresets are interpreted as potential coarse-grained deposits or as a result of clinoforms prograding to progressive deeper waters, resulting in steeper foresets. Clinoforms located in the eastern part of the study area are interpreted as sourced by a mud-rich system, reflecting a long transportation distance. However, thin, heterolithic patterns in the gamma-ray log possibly reflect thin, sheetlike sands. The height of the clinoforms seems to be a factor controlling the sediment bypass to deep water in the study area. When the height is more than 200 m (656 ft), bottomset deposits are common. This study contributes to a better understanding of the paleogeography and the evolution of the frontier southwestern Barents Sea during the Early Cretaceous and to comprehending the variables increasing the bypass of coarse-grained sediments to deep-water settings.
- 20 February 2017
- Published by Society of Petroleum Engineers (SPE)
A Novel Method for Multi-Resolution Earth Model Gridding
Earth models are important tools for support of decision making processes for optimal exploitation of subsurface resources. In earth modelling applications, massive amounts of information result from collecting and interpreting measurements and simulating physical scenarios at various scales and resolutions. The size of an earth model grid is a consequence of its scale and resolution. The grid size is a major factor for the computational efficiency when managing the model and performing various model based simulations. The grid is controlled by the geological structure, and the resolution of the grid is therefore controlled by the resolution of the geological structure (the number of structural elements). We discuss principles for a multi-resolution framework for earth model gridding where the aim is to allow automatic, local control of the resolution of a populated grid by locally controlling the resolution of the geological structure. The structure is ordered in a hierarchical manner, and splits the subsurface into a nested set of regions that are ordered in a corresponding hierarchical fashion. Each region can be separately gridded. The method is based on a recent method for local updates of the connectivity (topology) of the geological structure and of the resolution of a populated grid. Similar to existing strategies for multi-resolution modelling in other sciences and applications, the proposed method allows local control with the trade-off between numerical accuracy and grid size. The method should allow to locally change the model resolution even during a modelling exercise; subsurface volumes of high interest can be represented at fine resolution, whereas in volumes of less interest, details can be omitted. The method also enables local updates and local scale uncertainty management of the geological structure. The aim of the proposed method is to develop an effective methodology that supports real-time earth model based workflows such as geosteering where multiple grid realizations are never fixed and always updated with the most recent measurements and interpretations, and where each realization is always kept at an optimal resolution.
- 20 February 2017
- Published by Society of Petroleum Engineers (SPE)
A Novel Method for Multi-Resolution Earth Model Gridding
Earth models are important tools for support of decision making processes for optimal exploitation of subsurface resources. In earth modelling applications, massive amounts of information result from collecting and interpreting measurements and simulating physical scenarios at various scales and resolutions. The size of an earth model grid is a consequence of its scale and resolution. The grid size is a major factor for the computational efficiency when managing the model and performing various model based simulations. The grid is controlled by the geological structure, and the resolution of the grid is therefore controlled by the resolution of the geological structure (the number of structural elements). We discuss principles for a multi-resolution framework for earth model gridding where the aim is to allow automatic, local control of the resolution of a populated grid by locally controlling the resolution of the geological structure. The structure is ordered in a hierarchical manner, and splits the subsurface into a nested set of regions that are ordered in a corresponding hierarchical fashion. Each region can be separately gridded. The method is based on a recent method for local updates of the connectivity (topology) of the geological structure and of the resolution of a populated grid. Similar to existing strategies for multi-resolution modelling in other sciences and applications, the proposed method allows local control with the trade-off between numerical accuracy and grid size. The method should allow to locally change the model resolution even during a modelling exercise; subsurface volumes of high interest can be represented at fine resolution, whereas in volumes of less interest, details can be omitted. The method also enables local updates and local scale uncertainty management of the geological structure. The aim of the proposed method is to develop an effective methodology that supports real-time earth model based workflows such as geosteering where multiple grid realizations are never fixed and always updated with the most recent measurements and interpretations, and where each realization is always kept at an optimal resolution.