Sunghun Choi
Research Subjects
Sunghun Choi has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Jang Wook Choi
School of Chemical and Biological Engineering and Institute of Chemical Process Seoul National University Seoul Republic of Korea
6 shared publications Dae Hui Yun
Gwangju Clean Energy Research Center Korea Institute of Energy Research (KIER) 270‐25 Samso‐ro, Buk‐gu Gwangju 61003 Republic of Korea
2 shared publicationsHye Jin Kim
Graduate School of Energy, Environment, Water, and Sustainability (EEWS) and KAIST Institute NanoCentury, Korea Advanced Institute of Science and Technology (KAIST) , 291 Daehakro, Yuseong-gu, Daejeon 34141, Republic of Korea
2 shared publicationsJiseong Kim
Gwangju Clean Energy Research Center
2 shared publicationsJoon Kyo Seo
Gwangju Clean Energy Research Center Korea Institute of Energy Research (KIER) 270‐25 Samso‐ro, Buk‐gu Gwangju 61003 Republic of Korea
2 shared publicationsJoonhee Kang
Computational Science & Engineering Laboratory Korea Institute of Energy Research (KIER) 152 Gajeong‐ro, Yuseong‐gu Daejeon 34129 Republic of Korea
2 shared publications
Latest Publications
- 29 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (19) , 14030-14046
F-Free Binders for Lithium-Ion Battery Cathodes: Structural Insights and Challenges
- 29 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (19) , 14030-14046
F-Free Binders for Lithium-Ion Battery Cathodes: Structural Insights and Challenges
- 9 May 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (6) , 2670-2678
F-Free Pressure-Sensitive Adhesives as Dry-Coating Process Binders for Ultrahigh-Loading Graphite Anodes
- 9 May 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (6) , 2670-2678
F-Free Pressure-Sensitive Adhesives as Dry-Coating Process Binders for Ultrahigh-Loading Graphite Anodes
- 11 December 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (11)
A Multifunctional Crosslinked F‐Free Binder for MnO2 Microparticle Thick Cathode in Aqueous Zinc‐Ion Batteries
In pursuit of a carbon‐neutral society, extensive research has been conducted on Zn‐MnO2 batteries for their application in energy storage systems. Most efforts have focused on enhancing active material performance at the lab scale, with less attention on high‐loaded electrodes incorporating micro‐sized MnO2 for practical application. Although thick electrodes are required to improve the energy density of cells, unwanted issues such as poor wettability, Mn2+ dissolution, and low adhesion of the electrodes should be addressed to activate these high‐loaded electrodes. To overcome these problems, a multifunctional F‐free hydrophilic crosslinked (HPC) binder is proposed. Unlike F‐containing polyvinylidene fluoride and non‐crosslinked HPC binders showing weak adhesion and binder dissolution, respectively, the HPC binder exhibits hydrophilic, physically stable, and environmentally friendly natures. Moreover, due to the presence of carboxylate groups showing strong adsorption to eluted Mn2+ ions, the Mn2+ migration to the anode side is largely suppressed. Benefiting from these interesting features, the HPC cell exhibits stable cell operation by minimizing the accumulation of irreversible Zn‐vernadite, owing to maintaining the electrode integrity at a practical level of 13.3 mg cm−2. This study highlights the importance of binder design, enabling the use of thick electrodes as a step toward the commercialization of Zn–MnO2 batteries.
- 11 December 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (11)
A Multifunctional Crosslinked F‐Free Binder for MnO2 Microparticle Thick Cathode in Aqueous Zinc‐Ion Batteries
In pursuit of a carbon‐neutral society, extensive research has been conducted on Zn‐MnO2 batteries for their application in energy storage systems. Most efforts have focused on enhancing active material performance at the lab scale, with less attention on high‐loaded electrodes incorporating micro‐sized MnO2 for practical application. Although thick electrodes are required to improve the energy density of cells, unwanted issues such as poor wettability, Mn2+ dissolution, and low adhesion of the electrodes should be addressed to activate these high‐loaded electrodes. To overcome these problems, a multifunctional F‐free hydrophilic crosslinked (HPC) binder is proposed. Unlike F‐containing polyvinylidene fluoride and non‐crosslinked HPC binders showing weak adhesion and binder dissolution, respectively, the HPC binder exhibits hydrophilic, physically stable, and environmentally friendly natures. Moreover, due to the presence of carboxylate groups showing strong adsorption to eluted Mn2+ ions, the Mn2+ migration to the anode side is largely suppressed. Benefiting from these interesting features, the HPC cell exhibits stable cell operation by minimizing the accumulation of irreversible Zn‐vernadite, owing to maintaining the electrode integrity at a practical level of 13.3 mg cm−2. This study highlights the importance of binder design, enabling the use of thick electrodes as a step toward the commercialization of Zn–MnO2 batteries.
- Open Access
- 12 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-15
Advanced parametrization for the production of high-energy solid-state lithium pouch cells containing polymer electrolytes
Lithium batteries with solid-state electrolytes are an appealing alternative to state-of-the-art non-aqueous lithium-ion batteries with liquid electrolytes because of safety and energy aspects. However, engineering development at the cell level for lithium batteries with solid-state electrolytes is limited. Here, to advance this aspect and produce high-energy lithium cells, we introduce a cell design based on advanced parametrization of microstructural and architectural parameters of electrode and electrolyte components. To validate the cell design proposed, we assemble and test (applying a stack pressure of 3.74 MPa at 45 °C) 10-layer and 4-layer solid-state lithium pouch cells with a solid polymer electrolyte, resulting in an initial specific energy of 280 Wh kg−1 (corresponding to an energy density of 600 Wh L−1) and 310 Wh kg−1 (corresponding to an energy density of 650 Wh L−1) respectively.
- 12 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-15
Open AccessAdvanced parametrization for the production of high-energy solid-state lithium pouch cells containing polymer electrolytes
Lithium batteries with solid-state electrolytes are an appealing alternative to state-of-the-art non-aqueous lithium-ion batteries with liquid electrolytes because of safety and energy aspects. However, engineering development at the cell level for lithium batteries with solid-state electrolytes is limited. Here, to advance this aspect and produce high-energy lithium cells, we introduce a cell design based on advanced parametrization of microstructural and architectural parameters of electrode and electrolyte components. To validate the cell design proposed, we assemble and test (applying a stack pressure of 3.74 MPa at 45 °C) 10-layer and 4-layer solid-state lithium pouch cells with a solid polymer electrolyte, resulting in an initial specific energy of 280 Wh kg−1 (corresponding to an energy density of 600 Wh L−1) and 310 Wh kg−1 (corresponding to an energy density of 650 Wh L−1) respectively.
- 10 October 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (45) , e2303787
Carrageenan as a Sacrificial Binder for 5 V LiNi0.5Mn1.5O4 Cathodes in Lithium‐Ion Batteries
5 V‐class LiNi0.5Mn1.5O4 (LNMO) with its spinel symmetry is a promising cathode material for lithium‐ion batteries. However, the high‐voltage operation of LNMO renders it vulnerable to interfacial degradation involving electrolyte decomposition, which hinders long‐term and high‐rate cycling. Herein, this longstanding challenge presented by LNMO is overcome by incorporating a sacrificial binder, namely, λ‐carrageenan (CRN), a sulfated polysaccharide. This binder not only uniformly covers the LNMO surface via hydrogen bonding and ion‐dipole interaction but also offers an ionically conductive cathode–electrolyte interphase layer containing LiSOxF, a product of the electrochemical decomposition of the sulfate group. Taking advantage of these two auspicious properties, the CRN‐based electrode exhibits cycling and rate performance far superior to that of its counterparts based on the conventional poly(vinylidene difluoride) and sodium alginate binders. This study introduces a new concept, namely “sacrificial” binder, for battery electrodes known to deliver superior electrochemical performance but be adversely affected by interfacial instability.
- 10 October 2023
- Published by Wiley in Advanced Materials
- Vol. 35 (45) , e2303787
Carrageenan as a Sacrificial Binder for 5 V LiNi0.5Mn1.5O4 Cathodes in Lithium‐Ion Batteries
5 V‐class LiNi0.5Mn1.5O4 (LNMO) with its spinel symmetry is a promising cathode material for lithium‐ion batteries. However, the high‐voltage operation of LNMO renders it vulnerable to interfacial degradation involving electrolyte decomposition, which hinders long‐term and high‐rate cycling. Herein, this longstanding challenge presented by LNMO is overcome by incorporating a sacrificial binder, namely, λ‐carrageenan (CRN), a sulfated polysaccharide. This binder not only uniformly covers the LNMO surface via hydrogen bonding and ion‐dipole interaction but also offers an ionically conductive cathode–electrolyte interphase layer containing LiSOxF, a product of the electrochemical decomposition of the sulfate group. Taking advantage of these two auspicious properties, the CRN‐based electrode exhibits cycling and rate performance far superior to that of its counterparts based on the conventional poly(vinylidene difluoride) and sodium alginate binders. This study introduces a new concept, namely “sacrificial” binder, for battery electrodes known to deliver superior electrochemical performance but be adversely affected by interfacial instability.
- 10 February 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (11) , 5540-5547
A binder-driven cathode–electrolyte interphase via a displacement reaction for high voltage Na 3 V 2 (PO 4 ) 2 F 3 cathodes in sodium-ion batteries
A sodium polyacrylate (NaPAA) binder induces the formation of a stable and Na-ion conductive NaPO2F2-rich cathode–electrolyte interphase layer via a displacement reaction.
- 10 February 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (11) , 5540-5547
A binder-driven cathode–electrolyte interphase via a displacement reaction for high voltage Na 3 V 2 (PO 4 ) 2 F 3 cathodes in sodium-ion batteries
A sodium polyacrylate (NaPAA) binder induces the formation of a stable and Na-ion conductive NaPO2F2-rich cathode–electrolyte interphase layer via a displacement reaction.
- 1 June 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (6) , 062506
Facile Electrochemical Preparation of Nano-sized Ultra-high-temperature Ta 1−x Hf x C Ceramic Powders
Nano-sized powders of the Ta 1−x Hf x C class of ceramics, with compositions of Ta 0.2 Hf 0.8 C, Ta 0.5 Hf 0.5 C and Ta 0.8 Hf 0.2 C, were successfully synthesized from mixtures of the corresponding metal oxides and graphite by electro-deoxidation in molten CaCl 2 at 1173 K. X-ray diffraction revealed that the as-prepared Ta 0.8 Hf 0.2 C mixed carbide had a single-phase cubic structure whereas Ta 0.5 Hf 0.5 C and Ta 0.2 Hf 0.8 C had dual-phase cubic structures, indicating that the large proportion of Ta promoted the formation of a homogeneous solid solution of TaC and HfC during synthesis. Electron microscopy proved that the particle size of the mixed carbides was in the nano range, while energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirmed that the intended compositions had been attained. Notably, the electrochemical method of synthesizing Ta 1−x Hf x C mixed carbides proceeds at a significantly lower temperature than the conventional preparation methods. This offers a number of key advantages in that it saves energy, gives better control over composition and allows for higher purity, and it suppresses in situ sintering and thus enables the formation of nanoparticles.
- 1 June 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (6) , 062506
Facile Electrochemical Preparation of Nano-sized Ultra-high-temperature Ta 1−x Hf x C Ceramic Powders
Nano-sized powders of the Ta 1−x Hf x C class of ceramics, with compositions of Ta 0.2 Hf 0.8 C, Ta 0.5 Hf 0.5 C and Ta 0.8 Hf 0.2 C, were successfully synthesized from mixtures of the corresponding metal oxides and graphite by electro-deoxidation in molten CaCl 2 at 1173 K. X-ray diffraction revealed that the as-prepared Ta 0.8 Hf 0.2 C mixed carbide had a single-phase cubic structure whereas Ta 0.5 Hf 0.5 C and Ta 0.2 Hf 0.8 C had dual-phase cubic structures, indicating that the large proportion of Ta promoted the formation of a homogeneous solid solution of TaC and HfC during synthesis. Electron microscopy proved that the particle size of the mixed carbides was in the nano range, while energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirmed that the intended compositions had been attained. Notably, the electrochemical method of synthesizing Ta 1−x Hf x C mixed carbides proceeds at a significantly lower temperature than the conventional preparation methods. This offers a number of key advantages in that it saves energy, gives better control over composition and allows for higher purity, and it suppresses in situ sintering and thus enables the formation of nanoparticles.
- Top Cited Papers
- 21 July 2017
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 357 (6348) , 279-283
Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries
A stretchy binder protects the silicon: A challenge in using silicon particles for lithium batteries is that the large volume changes during charge-discharge cycling cause the particles to fracture, which builds up an insulating interface layer. Choi et al. show that traditional binder materials used to cushion the silicon particles can be improved by adding small amounts of polyrotaxanes (see the Perspective by Ryu and Park). The molecules consist of multiple rings that are strung along a linear segment and stoppered at each end. Some of the rings are anchored to the polymer binder, whereas others float freely, yielding a highly mobile but connected network that anchors the binder, and thus the silicon particles, together. Science , this issue p. 279 ; see also p. 250
- 21 July 2017
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 357 (6348) , 279-283
Top Cited PapersHighly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries
A stretchy binder protects the silicon: A challenge in using silicon particles for lithium batteries is that the large volume changes during charge-discharge cycling cause the particles to fracture, which builds up an insulating interface layer. Choi et al. show that traditional binder materials used to cushion the silicon particles can be improved by adding small amounts of polyrotaxanes (see the Perspective by Ryu and Park). The molecules consist of multiple rings that are strung along a linear segment and stoppered at each end. Some of the rings are anchored to the polymer binder, whereas others float freely, yielding a highly mobile but connected network that anchors the binder, and thus the silicon particles, together. Science , this issue p. 279 ; see also p. 250
- 16 February 2017
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 17 (3) , 1870-1876
Delicate Structural Control of Si–SiOx–C Composite via High-Speed Spray Pyrolysis for Li-Ion Battery Anodes
Despite the high theoretical capacity, silicon (Si) anodes in lithium-ion batteries have difficulty in meeting the commercial standards in various aspects. In particular, the huge volume change of Si makes it very challenging to simultaneously achieve high initial Coulombic efficiency (ICE) and long-term cycle life. Herein, we report spray pyrolysis to prepare Si–SiOx composite using an aqueous precursor solution containing Si nanoparticles, citric acid, and sodium hydroxide (NaOH). In the precursor solution, Si nanoparticles are etched by NaOH with the production of [SiO4]4–. During the dynamic course of spray pyrolysis, [SiO4]4– transforms to SiOx matrix and citric acid decomposes to carbon surface layer with the assistance of NaOH that serves as a decomposition catalyst. As a result, a Si–SiOx composite, in which Si nanodomains are homogeneously embedded in the SiOx matrix with carbon surface layer, is generated by a one-pot process with a residence time of only 3.5 s in a flow reactor. The optimal composite structure in terms of Si domain size and Si-to-O ratio exhibited excellent electrochemical performance, such as reversible capacity of 1561.9 mAh g–1 at 0.06C rate and ICE of 80.2% and 87.9% capacity retention after 100 cycles at 1C rate.
- 16 February 2017
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 17 (3) , 1870-1876
Delicate Structural Control of Si–SiOx–C Composite via High-Speed Spray Pyrolysis for Li-Ion Battery Anodes
Despite the high theoretical capacity, silicon (Si) anodes in lithium-ion batteries have difficulty in meeting the commercial standards in various aspects. In particular, the huge volume change of Si makes it very challenging to simultaneously achieve high initial Coulombic efficiency (ICE) and long-term cycle life. Herein, we report spray pyrolysis to prepare Si–SiOx composite using an aqueous precursor solution containing Si nanoparticles, citric acid, and sodium hydroxide (NaOH). In the precursor solution, Si nanoparticles are etched by NaOH with the production of [SiO4]4–. During the dynamic course of spray pyrolysis, [SiO4]4– transforms to SiOx matrix and citric acid decomposes to carbon surface layer with the assistance of NaOH that serves as a decomposition catalyst. As a result, a Si–SiOx composite, in which Si nanodomains are homogeneously embedded in the SiOx matrix with carbon surface layer, is generated by a one-pot process with a residence time of only 3.5 s in a flow reactor. The optimal composite structure in terms of Si domain size and Si-to-O ratio exhibited excellent electrochemical performance, such as reversible capacity of 1561.9 mAh g–1 at 0.06C rate and ICE of 80.2% and 87.9% capacity retention after 100 cycles at 1C rate.
- 24 December 2015
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 16 (1) , 282-288
Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells
Despite the recent considerable progress, the reversibility and cycle life of silicon anodes in lithium-ion batteries are yet to be improved further to meet the commercial standards. The current major industry, instead, adopts silicon monoxide (SiOx, x ≈ 1), as this phase can accommodate the volume change of embedded Si nanodomains via the silicon oxide matrix. However, the poor Coulombic efficiencies (CEs) in the early period of cycling limit the content of SiOx, usually below 10 wt % in a composite electrode with graphite. Here, we introduce a scalable but delicate prelithiation scheme based on electrical shorting with lithium metal foil. The accurate shorting time and voltage monitoring allow a fine-tuning on the degree of prelithiation without lithium plating, to a level that the CEs in the first three cycles reach 94.9%, 95.7%, and 97.2%. The excellent reversibility enables robust full-cell operations in pairing with an emerging nickel-rich layered cathode, Li[Ni0.8Co0.15Al0.05]O2, even at a commercial level of initial areal capacity of 2.4 mAh cm–2, leading to a full cell energy density 1.5-times as high as that of graphite-LiCoO2 counterpart in terms of the active material weight.
- 24 December 2015
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 16 (1) , 282-288
Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells
Despite the recent considerable progress, the reversibility and cycle life of silicon anodes in lithium-ion batteries are yet to be improved further to meet the commercial standards. The current major industry, instead, adopts silicon monoxide (SiOx, x ≈ 1), as this phase can accommodate the volume change of embedded Si nanodomains via the silicon oxide matrix. However, the poor Coulombic efficiencies (CEs) in the early period of cycling limit the content of SiOx, usually below 10 wt % in a composite electrode with graphite. Here, we introduce a scalable but delicate prelithiation scheme based on electrical shorting with lithium metal foil. The accurate shorting time and voltage monitoring allow a fine-tuning on the degree of prelithiation without lithium plating, to a level that the CEs in the first three cycles reach 94.9%, 95.7%, and 97.2%. The excellent reversibility enables robust full-cell operations in pairing with an emerging nickel-rich layered cathode, Li[Ni0.8Co0.15Al0.05]O2, even at a commercial level of initial areal capacity of 2.4 mAh cm–2, leading to a full cell energy density 1.5-times as high as that of graphite-LiCoO2 counterpart in terms of the active material weight.