YCYongmann M. Chung

Yongmann M. Chung

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yongmann M. Chung has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The statistical characteristics and auto-regeneration of backflow in non-Newtonian turbulent pipe flow

    by Xue Chen, Yongmann M. Chung, Minping Wan

    The backflow phenomenon in shear-thinning and shear-thickening fluids is investigated in pipe flows at friction Reynolds number Reτ=180 via direct numerical simulations. Conditional average results show that the extreme fluctuation of wall shear stress around the backflow regions is more abrupt under the shear-thinning effect. The statistical characteristics of the backflow at different flow indices from 0.5 to 1.5 show remarkable differences. The probability of the backflow events at the wall increases in both the shear-thinning and the shear-thickening fluids under different mechanisms. The backflow occurs more frequently and exists further away from the wall in the shear-thinning fluids owing to the suppressed near-wall turbulent structures and the laminarization at low flow indices. The increase in the probability of the backflow events in the shear-thickening fluids is caused by increased Q2 and Q4 events in the near-wall region. The variation in the size and the lifespan of the backflow regions with the flow index is very prominent which both increase with the shear-thinning effect and decrease as the flow becomes dilatant. In the weakly turbulent flow of shear-thinning fluid, large backflow regions appear near the leading edge of the turbulent spots where the off-axial turbulent fluctuations are significantly lowered. Observations show the linked evolution between the hairpin vortices and the backflow regions induced underneath the strong spanwise rotations. The backflow follows the auto-regeneration process of the hairpin vortices in a packet which results in coherent streamwise-aligned backflow regions under the hairpin packets confined closer to the wall.


  • Open Access

    Backflow structures in turbulent pipe flows at low to moderate Reynolds numbers

    by Xue Chen, Yongmann M. Chung, Minping Wan

    The statistical characteristics and the evolution of the backflow structures are investigated in wall-bounded flows at Reynolds numbers up to $Re_{\tau }=1000$ . The backflow is caused by the joining of large-scale high- and low-speed structures in the vicinity of the wall and is formed at the tail tip of the low-speed structure. The distribution density of the backflow structures and the percentage area of the backflow region on the wall both increase with the Reynolds number. The backflow structures have an average lifespan of 8 wall units which is found to be slightly longer in the pipe than the channel, and they are convected downstream at the average velocities of the buffer region of approximately 10 wall units, similar to Cardesa et al. (J. Fluid Mech., vol. 880, 2019, R3). The backflow structures occasionally split and merge, and can form detached from the wall. Evidence shows that the split, merged and wall-detached backflow structures are caused by the near-wall structures. The split backflow structures are on average, larger and more spanwise-elongated which are split due to the spanwise shearing of the near-wall streaks. A backflow structure is formed detached from the wall when the trailing end of its carrier low-speed structure ‘sits’ on the near-wall high-speed streaks. The wall-detached backflow structures tend to become wall-attached by approaching the wall when undergoing a similar life cycle to the normal backflow of growth and decay with spanwise elongation because the backflow region at the tail of the low-speed structure is continuously pressed down to the wall by the high-speed structure driven by persistent vortical structures in the buffer region.


  • Open Access

    Turbulent Drag Reduction by Travelling Waves of Spanwise Lorentz Force

    by Qiang Yang, Yongmann M. Chung

    Travelling waves induced by spanwise Lorentz force for skin-friction drag reduction are studied in the present work using direct numerical simulations, with particular focus on the streamwise and spanwise travelling waves. The overall picture of drag reduction in the frequency-wavenumber parameter space, $$\omega -\kappa _x-\kappa _z$$ ω - κ x - κ z is uncovered. It is found that both drag reduction maps for the streamwise and spanwise travelling waves are featured with a drag reduction ( $$\mathcal{D}\mathcal{R}$$ D R ) region and a drag increase ( $$\mathcal{D}\mathcal{I}$$ D I ) region. For the streamwise travelling wave of spanwise Lorentz force, the $$\mathcal{D}\mathcal{R}$$ D R and $$\mathcal{D}\mathcal{I}$$ D I regions are located in the same parameter regime compared to that of the streamwise travelling wave of spanwise wall velocity, while for the spanwise travelling wave, the $$\mathcal{D}\mathcal{R}$$ D R variation at any fixed $$\kappa _z$$ κ z is similar to that of spanwise oscillating Lorentz force. An exploration of the oblique travelling wave with an angle to the mean flow shows that the optimal drag reduction appears when the wave travels backward relative to the flow direction, and the "ribbon" structure is a general phenomenon appearing in all oblique travelling wave cases. The ensemble averaged positive and negative quasi-streamwise vortices become asymmetric when the travelling wave is imposed, and the near-wall high- and low-speed streaks are significantly tilted in the spanwise direction. Spanwise oscillation, streamwise and spanwise travelling waves share strong similarity in the statistics, energy spectra as well as turbulent structure modulation.


  • Open Access

    Numerical model for cough‐generated droplet dispersion on moving escalator with multiple passengers

    by Ayato Takii, Masashi Yamakawa, Atsuhide Kitagawa, Tomoaki Watamura, Yongmann M. Chung, Minsuok Kim

    To investigate the motion of virus-laden droplets between moving passengers in line, we performed numerical simulations of the distribution of airborne droplets within a geometrically detailed model similar to an actual escalator. The left and right sides and the ceiling of the escalator model were surrounded by walls, assuming a subway used by many people every day with concern to virus-laden droplets. Steps and handrails were incorporated in the model to faithfully compute the escalator-specific flow field. The ascending and descending movements of the escalator were performed with 10 or 5 passengers standing at different boarding intervals. To resolve the unsteady airflow that is excited by a moving boundary consisting of passengers, steps, and handrails, the moving computational domain method based on the moving-grid finite-volume method was applied. On the basis of the consideration that the droplets were small enough, droplet dispersion was computed by solving the equation of virus-laden droplet motion using a pre-computed velocity field, in which the flow rate of a cough, diameter distribution, and evaporation of droplets are incorporated. The simulation resolved the detailed motion of droplets in flow, and therefore, we were able to evaluate the risk of viral adhesion to following passengers. As a result, we found that the ascending escalator had a higher risk of being exposed to virus-laden droplets than the descending escalator. We also reported that the chance of viral droplet adhesion decreases as the distance from the infected person increases, emphasizing the importance of social distancing.


  • Open Access

    Turbulent Drag Reduction by Travelling Waves of Spanwise Lorentz Force

    by Qiang Yang, Yongmann Chung

    Travelling waves induced by spanwise Lorentz force for skin-friction drag reduction are studied in the present work using direct numerical simulations, with particular focus on the streamwise and spanwise travelling waves. The overall picture of drag reduction in the ω+ − κx+ − κz+ parameter space is uncovered. It is found that both drag reduction maps for the streamwise and spanwise travelling waves are featured with a drag reduction (DR) region and a drag increase (DI) region. For the streamwise travelling wave of spanwise Lorentz force, the DR and DI regions are located in the same parameter regime compared to that of the streamwise travelling wave of spanwise wall velocity, while for the spanwise travelling wave, the DR variation at any fixed κz+ is similar to the spanwise oscillating Lorentz force. An exploration of the oblique travelling wave with an angle to the mean flow shows that the optimal drag reduction appears when the wave travels backward relative to the flow direction, and the “ribbon” structure is a general phenomenon appearing in all oblique travelling wave cases. The ensemble averaged positive and negative quasi-streamwise vortices become asymmetric when the travelling wave is imposed, and the near-wall high- and low-speed streaks are significantly twisted in the spanwise direction. Spanwise oscillation, streamwise and spanwise travelling waves share strong similarity in the statistics, energy spectra as well as turbulent structure modulation.

  • Review for State-of-the-Art Health Monitoring Technologies on Airframe Fuel Pumps

    by Tedja Verhulst, David Judt, Craig Lawson, Yongmann Chung, Osama Al-Tayawe, Geoff Ward

    Aircraft maintenance is an essential cost borne by the airline. Improving maintenance practices for day-to-day operations can lead to significant financial savings. The benefits of effective maintenance are derived from the avoided costs caused by unexpected breakdowns and from maximising aircraft flight time transporting passengers. The fuel system is a crucial part of the entire aircraft as it ensures delivery of the fuel to the engine and a key component within this system are the fuel pumps. These airborne fuel pumps are classified between the pumps installed in the airframe fuel system and in the engine fuel system. Past works have investigated the performance characteristics of these pumps during flight, however there are no reviews related to the present Health Monitoring (HM) capabilities under flight conditions. HM refers to the field of diagnosing faults or predicting the remaining useful life (RUL) of the pump and the focus of this review is to highlight the HM technologies suitable for aircraft fuel pumps. This is done by first reviewing the technologies and concepts related to HM of fuel pumps. Second a literature review is carried out on pump and motor faults is carried out, drawing on examples from aerospace and other relevant industries. Section 6: Conclusion, discusses the HM technologies have been applied to aerospace fuel pumps and highlights the gaps in capabilities, based on the findings of the literature review carried out in Section 4: Common Faults and Section 5: HM Sensing Methods to suggest future developments in this field. It was found that there is a large scope for development for the HM airframe fuel pumps, based on reviewing the present state of the art. Furthermore, there are no clear strategies formulated by airframe manufacturers and equipment suppliers to test and implement existing HM solutions to operate under flight conditions. This highlights the need to develop HM in this field and a requirement for further research to allow this technology to be a part of routine aircraft


  • Numerical simulation of a confined cavitating gas bubble driven by ultrasound

    by Jacqueline Mifsud, Duncan A. Lockerby, Yongmann M. Chung, Gordon Jones

    This work investigates the flow disturbance generated by an ultrasonically driven gas bubble confined in a narrow gap over one acoustic cycle. Here, we provide a more accurate representation of ultrasonic cleaning by implementing a volume-of-fluid model in OpenFOAM that simulates the ultrasound as a sinusoidally time-varying pressure boundary condition. A modified Rayleigh–Plesset equation is solved to select an acoustic forcing that instigates bubble collapse. Simulations reveal the interaction between the inflow from the acoustic forcing and the flow deflected by the confining walls intensifies the strength of the self-piercing micro-jet(s), and consequently of the unsteady boundary layer flow, compared to the traditional collapse near a single rigid wall. Depending on the gap height and the position of bubble inception inside the gap, three distinct collapse regimes involving dual-jets or directed-jets are identified, each resulting in a different shear-stress footprint on the confining boundaries. Plots of the spatiotemporal evolution of the shear flow (that is difficult to measure experimentally) reveal peak shear-stress magnitudes at collapse that are double those reported for an undriven laser-induced bubble in similar geometric confinement. This twofold increase is attributed to the ultrasonic signal driving the collapse. Surprisingly, in our simulations we have not encountered a transferred-jet regime previously observed for an unforced bubble collapsing in a similar configuration. This unexpected finding highlights the different physics involved in modeling acoustically driven bubbles compared with the conventional laser-induced bubbles used in experiments.