Yvan Gariepy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yvan Gariepy has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
Vijaya Raghavan
Department of Bioresource Engineering, Macdonald Campus of McGill University, Ste-Anne-de-Bellevue, Quebec, Canada
11 shared publications- Vijaya Raghavan
Department of Bioresource Engineering McGill University Montréal Canada
10 shared publications - Valérie Orsat
Department of Bioresource Engineering McGill University Montreal Quebec Canada
5 shared publications - Ashutosh Singh
School of Engineering University of Guelph Guelph Ontario Canada
4 shared publications - Maria Márcia Pereira Sartori
Department of Plant Production, School of Agricultural Sciences (FCA), São Paulo State University (UNESP) , 18610-034, Botucatu, SP
3 shared publications - Sai Kranthi Vanga
Department of Bioresource Engineering, Faculty of Agriculture and Environmental Studies, McGill University, Sainte-Anne-de-Bellevue, QC H9X 3V9, Canada
3 shared publications
Latest Publications
- 11 July 2026
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 19 (8) , 393
Development of a Time–Temperature Indicator Device for Smart Safety Monitoring of Milk Packaging with Smartphone-Assisted Detection
- 11 July 2026
- Published by Springer Nature in Food and Bioprocess Technology
- Vol. 19 (8) , 393
Development of a Time–Temperature Indicator Device for Smart Safety Monitoring of Milk Packaging with Smartphone-Assisted Detection
- Open Access
- 1 January 2026
- Published by Wiley in Journal of Food Biochemistry
- Vol. 2026 (1)
Drying‐Driven Modulation of Bioactive Phenolics From Lignocellulosic Pea Biomass and Their Application in Pea Protein Isolate–Based Bio‐Packaging
This study investigates the influence of drying conditions (freeze‐drying [FD], 40°C–140°C oven drying) on pea biomass (PB) phenolic content, antioxidant activity, and their application in pea protein isolate (PPI)–based antioxidant‐enriched biofilms. Moisture decreased from 12.6% (40°C) to 1.7% (140°C), while protein increased from 13.3% to 17.4%. Phenolic profiling revealed that the highest catechin concentrations were at 120°C–140°C (511.53–515.95 μg/g DM), the highest rutin content at 120°C (648.09 μg/g DM), while quercetin was highest at 40°C (1205.87 μg/g DM). The highest FRAP antioxidant activity was observed in extracts obtained from both 120°C oven‐dried and FD biomass, which shared the same statistical significance group ( p < 0.05), indicating comparable reducing antioxidant capacity. PPI films incorporating PB phenolic extracts (5%) exhibited improved tensile strength (11.5 MPa at 120°C), reduced water solubility (25.64%–33.66%), and enhanced antioxidant activity (FRAP: 174.25 μM TE/g DM). FD extracts preserved thermolabile compounds, while controlled oven drying (100°C–120°C) provided a practical compromise between phenolic recovery and process simplicity, although comprehensive sustainability assessments remain necessary for industrial implementation.
- 1 January 2026
- Published by Wiley in Journal of Food Biochemistry
- Vol. 2026 (1)
Open AccessDrying‐Driven Modulation of Bioactive Phenolics From Lignocellulosic Pea Biomass and Their Application in Pea Protein Isolate–Based Bio‐Packaging
This study investigates the influence of drying conditions (freeze‐drying [FD], 40°C–140°C oven drying) on pea biomass (PB) phenolic content, antioxidant activity, and their application in pea protein isolate (PPI)–based antioxidant‐enriched biofilms. Moisture decreased from 12.6% (40°C) to 1.7% (140°C), while protein increased from 13.3% to 17.4%. Phenolic profiling revealed that the highest catechin concentrations were at 120°C–140°C (511.53–515.95 μg/g DM), the highest rutin content at 120°C (648.09 μg/g DM), while quercetin was highest at 40°C (1205.87 μg/g DM). The highest FRAP antioxidant activity was observed in extracts obtained from both 120°C oven‐dried and FD biomass, which shared the same statistical significance group ( p < 0.05), indicating comparable reducing antioxidant capacity. PPI films incorporating PB phenolic extracts (5%) exhibited improved tensile strength (11.5 MPa at 120°C), reduced water solubility (25.64%–33.66%), and enhanced antioxidant activity (FRAP: 174.25 μM TE/g DM). FD extracts preserved thermolabile compounds, while controlled oven drying (100°C–120°C) provided a practical compromise between phenolic recovery and process simplicity, although comprehensive sustainability assessments remain necessary for industrial implementation.
- Open Access
- 31 October 2025
- Published by MDPI AG in Microorganisms
- Vol. 13 (11) , 2500
The Exploitation of Single-Chambered Microbial Fuel Cells for PET Removal in Water
This work investigated the use of microbial fuel cells (MFCs) for the degradation of polyethylene terephthalate (PET) and the simultaneous generation of electricity. The study implemented two separate single-chamber MFCs, one with a co-culture of Ideonella sakaiensis and Geobacter sulfurreducens (I.S-G.S) and the other with Ideonella sakaiensis and activated sludge (I.S-AS). The effectiveness of microplastic (MP) degradation was assessed based on the electroactivity of the anodic biofilm, the reduction in particle size, and the decrease in PET mass. Both systems achieved a significant reduction in MP size and mass, with the I.S-AS system notably surpassing the I.S-G.S in terms of efficiency and electricity generation. The I.S-AS system achieved a 30% mass reduction and 80% size reduction, along with a peak voltage of 222 mV. The study concludes that MFCs, particularly with the activated sludge co-culture, offer a viable and more environmentally friendly alternative for MP degradation and energy recovery. These findings suggest a promising direction for improving waste management practices and advancing the capabilities of bio-electrochemical systems in addressing plastic pollution. Further research is recommended to optimize the operational conditions and to test a broader range of MP sizes for enhanced degradation efficacy.
- 31 October 2025
- Published by MDPI AG in Microorganisms
- Vol. 13 (11) , 2500
Open AccessThe Exploitation of Single-Chambered Microbial Fuel Cells for PET Removal in Water
This work investigated the use of microbial fuel cells (MFCs) for the degradation of polyethylene terephthalate (PET) and the simultaneous generation of electricity. The study implemented two separate single-chamber MFCs, one with a co-culture of Ideonella sakaiensis and Geobacter sulfurreducens (I.S-G.S) and the other with Ideonella sakaiensis and activated sludge (I.S-AS). The effectiveness of microplastic (MP) degradation was assessed based on the electroactivity of the anodic biofilm, the reduction in particle size, and the decrease in PET mass. Both systems achieved a significant reduction in MP size and mass, with the I.S-AS system notably surpassing the I.S-G.S in terms of efficiency and electricity generation. The I.S-AS system achieved a 30% mass reduction and 80% size reduction, along with a peak voltage of 222 mV. The study concludes that MFCs, particularly with the activated sludge co-culture, offer a viable and more environmentally friendly alternative for MP degradation and energy recovery. These findings suggest a promising direction for improving waste management practices and advancing the capabilities of bio-electrochemical systems in addressing plastic pollution. Further research is recommended to optimize the operational conditions and to test a broader range of MP sizes for enhanced degradation efficacy.
- Open Access
- 4 July 2025
- Published by MDPI AG in Horticulturae
- Vol. 11 (7) , 792
Green Light Enhances the Postharvest Quality of Lettuce During Cold Storage
The postharvest quality of lettuce (Lactuca sativa) is significantly influenced by the lighting environment during storage. This study evaluated the effects of green LEDs at 500 nm and 530 nm, white LEDs (400–700 nm), and dark storage on lettuce quality over 14 days at 5 °C. All treatments were applied at 10 µmol m−2 s−1 under a 12 h photoperiod. Quality parameters measured included moisture loss, relative water content (RWC), photosynthetic rate, chlorophyll content (SPAD), total soluble solids (TSSs), electrolyte leakage (EL), color change (∆E), texture (crispness), and overall visual quality (OVQ). Lettuce stored under green LEDs, particularly 530 nm, exhibited superior postharvest quality. Compared to dark storage, 530 nm reduced moisture loss by 7.1%, increased RWC by 9.2%, and reduced transpiration rate. The green light preserved photosynthetic activity (43% decline vs. 77% in the dark), increased TSS, reduced color change by 42%, improved crispness by 46.1%, and limited EL to 54.5%. Shelf life was extended by approximately four days. The 500 nm treatment showed notable improvements, including an 8.4% reduction in moisture loss, 8.2% higher RWC, a smaller photosynthesis decline (25%), and the lowest EL (53.1%). It improved color retention (∆E reduced by 45.3%) and crispness (46.8%). Both green wavelengths effectively maintained lettuce quality during cold storage, with 530 nm being the most effective overall. These results suggest that targeted green LED lighting is a promising, energy-efficient strategy to preserve postharvest quality and extend shelf life in leafy greens.
- 4 July 2025
- Published by MDPI AG in Horticulturae
- Vol. 11 (7) , 792
Open AccessGreen Light Enhances the Postharvest Quality of Lettuce During Cold Storage
The postharvest quality of lettuce (Lactuca sativa) is significantly influenced by the lighting environment during storage. This study evaluated the effects of green LEDs at 500 nm and 530 nm, white LEDs (400–700 nm), and dark storage on lettuce quality over 14 days at 5 °C. All treatments were applied at 10 µmol m−2 s−1 under a 12 h photoperiod. Quality parameters measured included moisture loss, relative water content (RWC), photosynthetic rate, chlorophyll content (SPAD), total soluble solids (TSSs), electrolyte leakage (EL), color change (∆E), texture (crispness), and overall visual quality (OVQ). Lettuce stored under green LEDs, particularly 530 nm, exhibited superior postharvest quality. Compared to dark storage, 530 nm reduced moisture loss by 7.1%, increased RWC by 9.2%, and reduced transpiration rate. The green light preserved photosynthetic activity (43% decline vs. 77% in the dark), increased TSS, reduced color change by 42%, improved crispness by 46.1%, and limited EL to 54.5%. Shelf life was extended by approximately four days. The 500 nm treatment showed notable improvements, including an 8.4% reduction in moisture loss, 8.2% higher RWC, a smaller photosynthesis decline (25%), and the lowest EL (53.1%). It improved color retention (∆E reduced by 45.3%) and crispness (46.8%). Both green wavelengths effectively maintained lettuce quality during cold storage, with 530 nm being the most effective overall. These results suggest that targeted green LED lighting is a promising, energy-efficient strategy to preserve postharvest quality and extend shelf life in leafy greens.
- Open Access
Innovative Solution for Invasive Species and Water Pollution: Hydrochar Synthesis from Pleco Fish Biomass
In recent years, the invasive pleco fish has emerged as a global concern due to its adverse effects on ecosystems and economic activities, particularly in various water bodies in Mexico. This study introduces an innovative solution, employing microwave-assisted hydrothermal carbonization (MHTC) to synthesize hydrochar from pleco fish biomass. The research aimed to optimize synthesis conditions to enhance hydrochar yield, calorific value, and adsorption capacities for fluoride and cadmium in water. MHTC, characterized by low energy consumption, high reaction rates, and a simple design, was employed as a thermochemical process for hydrochar production. Key findings revealed that through response surface analysis, the study identified the optimal synthesis conditions for hydrochar production, maximizing yield and adsorption capacities while minimizing energy consumption. Physicochemical characterization demonstrated that hydrochars derived from pleco fish biomass exhibited mesoporous structures with fragmented surfaces, resembling hydroxyapatite, a major component of bone. Hydrochars derived from pleco fish biomass exhibited promising adsorption capacities for fluoride and cadmium in water, with hydrochar from Exp. 1 (90 min, 160 °C) showing the highest adsorption capacity for fluoride (4.16 mg/g), while Exp. 5 (90 min, 180 °C) demonstrated superior adsorption capacity for cadmium (98.5 mg/g). Furthermore, the utilization of pleco fish biomass for hydrochar production not only offers an eco-friendly disposal method for invasive species but also addresses fluoride and cadmium contamination issues, contributing to sustainable waste management and water treatment solutions. The resulting hydrochar, rich in solid fuel content with low pollutant emissions, presents a promising approach for waste management and carbon sequestration. Moreover, the optimized synthesis conditions pave the way for sustainable applications in energy production, addressing critical environmental and public health concerns. This research provides valuable insights into the potential of microwave-assisted hydrothermal carbonization for transforming invasive species into valuable resources, thereby mitigating environmental challenges and promoting sustainable development.
Open AccessInnovative Solution for Invasive Species and Water Pollution: Hydrochar Synthesis from Pleco Fish Biomass
In recent years, the invasive pleco fish has emerged as a global concern due to its adverse effects on ecosystems and economic activities, particularly in various water bodies in Mexico. This study introduces an innovative solution, employing microwave-assisted hydrothermal carbonization (MHTC) to synthesize hydrochar from pleco fish biomass. The research aimed to optimize synthesis conditions to enhance hydrochar yield, calorific value, and adsorption capacities for fluoride and cadmium in water. MHTC, characterized by low energy consumption, high reaction rates, and a simple design, was employed as a thermochemical process for hydrochar production. Key findings revealed that through response surface analysis, the study identified the optimal synthesis conditions for hydrochar production, maximizing yield and adsorption capacities while minimizing energy consumption. Physicochemical characterization demonstrated that hydrochars derived from pleco fish biomass exhibited mesoporous structures with fragmented surfaces, resembling hydroxyapatite, a major component of bone. Hydrochars derived from pleco fish biomass exhibited promising adsorption capacities for fluoride and cadmium in water, with hydrochar from Exp. 1 (90 min, 160 °C) showing the highest adsorption capacity for fluoride (4.16 mg/g), while Exp. 5 (90 min, 180 °C) demonstrated superior adsorption capacity for cadmium (98.5 mg/g). Furthermore, the utilization of pleco fish biomass for hydrochar production not only offers an eco-friendly disposal method for invasive species but also addresses fluoride and cadmium contamination issues, contributing to sustainable waste management and water treatment solutions. The resulting hydrochar, rich in solid fuel content with low pollutant emissions, presents a promising approach for waste management and carbon sequestration. Moreover, the optimized synthesis conditions pave the way for sustainable applications in energy production, addressing critical environmental and public health concerns. This research provides valuable insights into the potential of microwave-assisted hydrothermal carbonization for transforming invasive species into valuable resources, thereby mitigating environmental challenges and promoting sustainable development.
- 13 July 2023
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 196 (4) , 1820-1839
Effective and Economical 3D Carbon Sponge with Carbon Nanoparticles as Floating Air Cathode for Sustainable Electricity Production in Microbial Fuel Cells
The effective and economical 3D floating air cathodes were fabricated by a simple dipping-drying method with carbon black (CB), ethanol, and PTFE solution. Pristine Type I polyurethane sponge (5 pores/mm) and Pristine Type II polyurethane sponge (3 pores/mm) were used as the support. The deposition of CB on the Pristine Type I and Pristine Type II materials was detected by scanning electron microscopy and Fourier transform infrared spectroscopy. The carbon loss rate test exhibited good CB adhesive stability on both floating air cathodes. Besides, Type I/CB floating air cathode displayed 3.7 times higher tensile strength, 10.58 times higher elongation at break, and 3.3 times lower cost than carbon felt. The electricity production ability of carbon cloth (CC) anode with carbon felt, Type I/CB, and Type II/CB cathode MFCs (CC-CF-MFC, CC-I-MFC, and CC-II-MFC) was evaluated. After 130 days, the CC-I-MFC showed a maximum power density (PD) of 92.58 mW/m3, which was 4.6 times higher than the CC-CF-MFC. Compared with Type II/CB, Type I/CB cathode improved the maximum power density by 160% due to the smaller pores, rougher surface, and higher surface wettability. Further, CC-I-MFC exhibited the best overall oxidation-reduction performance and chemical oxygen demand removal efficiency. Consequently, Type I/CB floating air cathode opens a new opportunity for scaling up simple, inexpensive, and high-performance MFCs for energy production.
- 13 July 2023
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 196 (4) , 1820-1839
Effective and Economical 3D Carbon Sponge with Carbon Nanoparticles as Floating Air Cathode for Sustainable Electricity Production in Microbial Fuel Cells
The effective and economical 3D floating air cathodes were fabricated by a simple dipping-drying method with carbon black (CB), ethanol, and PTFE solution. Pristine Type I polyurethane sponge (5 pores/mm) and Pristine Type II polyurethane sponge (3 pores/mm) were used as the support. The deposition of CB on the Pristine Type I and Pristine Type II materials was detected by scanning electron microscopy and Fourier transform infrared spectroscopy. The carbon loss rate test exhibited good CB adhesive stability on both floating air cathodes. Besides, Type I/CB floating air cathode displayed 3.7 times higher tensile strength, 10.58 times higher elongation at break, and 3.3 times lower cost than carbon felt. The electricity production ability of carbon cloth (CC) anode with carbon felt, Type I/CB, and Type II/CB cathode MFCs (CC-CF-MFC, CC-I-MFC, and CC-II-MFC) was evaluated. After 130 days, the CC-I-MFC showed a maximum power density (PD) of 92.58 mW/m3, which was 4.6 times higher than the CC-CF-MFC. Compared with Type II/CB, Type I/CB cathode improved the maximum power density by 160% due to the smaller pores, rougher surface, and higher surface wettability. Further, CC-I-MFC exhibited the best overall oxidation-reduction performance and chemical oxygen demand removal efficiency. Consequently, Type I/CB floating air cathode opens a new opportunity for scaling up simple, inexpensive, and high-performance MFCs for energy production.
- Open Access
- 12 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8116
Quality of Soybean Seeds after Microwave Drying
The use of electromagnetic energy for drying seeds has been shown to be a promising alternative. However, studies show that the technique still lacks careful evaluation due to the sensitivity of soybean seeds to damage caused using microwaves. Studies have shown that the use of microwaves during drying can be safe in seeds of soybeans, corn, and beans, among others. These studies recognize that drying using microwaves has a great potential for savings in the drying process, as it considerably reduces the drying time. This work aimed to evaluate the immediate damage caused in soybean seeds subjected to drying at temperatures of 40, 50, and 60 °C, with power of 0, 0.5, and 1 W/g at a frequency of 2.45 GHz. The results of the vigor and germination tests showed that the action of microwaves on seeds was not only safe and more efficient but also brought about increases in seed germination and vigor. However, the process must be judicious and obey precise indices of power and temperature to not cause damage to the seeds.
- 12 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8116
Open AccessQuality of Soybean Seeds after Microwave Drying
The use of electromagnetic energy for drying seeds has been shown to be a promising alternative. However, studies show that the technique still lacks careful evaluation due to the sensitivity of soybean seeds to damage caused using microwaves. Studies have shown that the use of microwaves during drying can be safe in seeds of soybeans, corn, and beans, among others. These studies recognize that drying using microwaves has a great potential for savings in the drying process, as it considerably reduces the drying time. This work aimed to evaluate the immediate damage caused in soybean seeds subjected to drying at temperatures of 40, 50, and 60 °C, with power of 0, 0.5, and 1 W/g at a frequency of 2.45 GHz. The results of the vigor and germination tests showed that the action of microwaves on seeds was not only safe and more efficient but also brought about increases in seed germination and vigor. However, the process must be judicious and obey precise indices of power and temperature to not cause damage to the seeds.
- Open Access
The Effect of Magneto-Priming on the Physiological Quality of Soybean Seeds
Microwaves have been applied to the drying of seeds of several species due to their maintenance of the quality of the seeds and reduction of time and costs. However, few is known about the effect of microwaves on the increase of the physiological quality of soybean seeds and especially their effects on longevity. Therefore, the use of microwaves as magneto-priming in soybean seeds was the object of study in this work. For this purpose, two soybean cultivars were selected and submitted to the ultra-high frequency (UHF) microwave exposure of 2.45 GHz, in the wavelength of 11 cm, and power of 0.2 W/g, for 15 min. The results showed that this condition of exposure to the microwave brought benefits in both cultivars after treatment. Incremental improvements were observed in the germinability indexes, the seedling length, the water absorption by the seeds, the fresh mass, dry mass, and longevity. The genes related to seed germination and longevity showed superior expression (HSFA3, HSP21, HSP17.6b, EXP, ABI3) with magneto-priming treatment. The data found ensure the use of the technique as a viable option for pre-treatment as magneto-priming in soybean seeds in order to improve seed quality.
Open AccessThe Effect of Magneto-Priming on the Physiological Quality of Soybean Seeds
Microwaves have been applied to the drying of seeds of several species due to their maintenance of the quality of the seeds and reduction of time and costs. However, few is known about the effect of microwaves on the increase of the physiological quality of soybean seeds and especially their effects on longevity. Therefore, the use of microwaves as magneto-priming in soybean seeds was the object of study in this work. For this purpose, two soybean cultivars were selected and submitted to the ultra-high frequency (UHF) microwave exposure of 2.45 GHz, in the wavelength of 11 cm, and power of 0.2 W/g, for 15 min. The results showed that this condition of exposure to the microwave brought benefits in both cultivars after treatment. Incremental improvements were observed in the germinability indexes, the seedling length, the water absorption by the seeds, the fresh mass, dry mass, and longevity. The genes related to seed germination and longevity showed superior expression (HSFA3, HSP21, HSP17.6b, EXP, ABI3) with magneto-priming treatment. The data found ensure the use of the technique as a viable option for pre-treatment as magneto-priming in soybean seeds in order to improve seed quality.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Food Technology
- Vol. 26, e2023006
Optimization of temperature and power density in microwave-assisted hot air oven drying and storage stability of dried apple sticks
Quality of microwave-assisted hot air-dried apple sticks remained acceptable at ambient storage for 75 days
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Food Technology
- Vol. 26, e2023006
Open AccessOptimization of temperature and power density in microwave-assisted hot air oven drying and storage stability of dried apple sticks
Quality of microwave-assisted hot air-dried apple sticks remained acceptable at ambient storage for 75 days
- 20 December 2022
- Published by Elsevier in Materials Today Communications
- Vol. 34
Evaluating corn-based biochar as an alternative to carbon black in styrene-butadiene rubber composites
- 20 December 2022
- Published by Elsevier in Materials Today Communications
- Vol. 34
Evaluating corn-based biochar as an alternative to carbon black in styrene-butadiene rubber composites