Andrew J. Smye
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Andrew J. Smye has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Donald M. Fisher
Pennsylvania State University
7 shared publications - Joshua Michael Garber
Department of Geosciences, The Pennsylvania State University, University Park, PA, USA
6 shared publications - Yoshitaka Hashimoto
Kochi University Kochi Japan
5 shared publications - Michael P. Searle
University of Oxford
4 shared publications - Philip England
Department of Earth Sciences University of Oxford Oxford UK
4 shared publications - Tsai-Wei Chen
Department of Geosciences Pennsylvania State University University Park PA USA
4 shared publications
Latest Publications
- Open Access
- 14 October 2026
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 27 (10)
Earthquakes and the Metamorphic Sole of the Tinos Ophiolite, Cyclades, Greece
We analyze deformation fabrics, compositions of melts, metamorphic temperatures, and paleopiezometric data beneath the Tsiknias Thrust, Tinos, Greece, which formed part of the plate boundary that, in Late‐Cretaceous time, absorbed convergence between Africa and Europe associated with final closure of the Vardar Ocean. Sedimentary and mafic rocks of the ocean floor beneath the Thrust experienced metamorphism at pressures of GPa, equivalent to a depth of about 30 km, and at ambient temperatures of °C. Subgrain‐size piezometry indicates that shear stress during this metamorphism was MPa, consistent with estimates of shear stress at comparable depths on present‐day convergent plate boundaries. In the meters immediately beneath the Tsiknias Thrust, apparent metamorphic temperatures vary between 600° and 800°C. In some locations the upper 10 m of the amphibolites are cut by veins, consisting almost entirely of plagioclase, whose compositions cannot be explained by partial melting of the host rock in that temperature range. They are, however, consistent with the products of laboratory experiments on frictional slip at seismic rates. We interpret these veins, and their deformed equivalents, as recording repeated episodes of coseismic melting followed by ductile shearing. Melt‐vein thicknesses of mm imply coseismic energy dissipation of J , which is comparable with seismological measurements of breakdown work in earthquakes on present‐day plate interfaces.
- 14 October 2026
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 27 (10)
Open AccessEarthquakes and the Metamorphic Sole of the Tinos Ophiolite, Cyclades, Greece
We analyze deformation fabrics, compositions of melts, metamorphic temperatures, and paleopiezometric data beneath the Tsiknias Thrust, Tinos, Greece, which formed part of the plate boundary that, in Late‐Cretaceous time, absorbed convergence between Africa and Europe associated with final closure of the Vardar Ocean. Sedimentary and mafic rocks of the ocean floor beneath the Thrust experienced metamorphism at pressures of GPa, equivalent to a depth of about 30 km, and at ambient temperatures of °C. Subgrain‐size piezometry indicates that shear stress during this metamorphism was MPa, consistent with estimates of shear stress at comparable depths on present‐day convergent plate boundaries. In the meters immediately beneath the Tsiknias Thrust, apparent metamorphic temperatures vary between 600° and 800°C. In some locations the upper 10 m of the amphibolites are cut by veins, consisting almost entirely of plagioclase, whose compositions cannot be explained by partial melting of the host rock in that temperature range. They are, however, consistent with the products of laboratory experiments on frictional slip at seismic rates. We interpret these veins, and their deformed equivalents, as recording repeated episodes of coseismic melting followed by ductile shearing. Melt‐vein thicknesses of mm imply coseismic energy dissipation of J , which is comparable with seismological measurements of breakdown work in earthquakes on present‐day plate interfaces.
- Open Access
- 29 June 2026
- Published by Wiley
Earthquakes and the Metamorphic Sole of the Tinos Ophiolite, Cyclades, Greece
- 29 June 2026
- Published by Wiley
Open AccessEarthquakes and the Metamorphic Sole of the Tinos Ophiolite, Cyclades, Greece
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Linking Reactive Fluid Flow to Rheology of Eclogite-Facies Oceanic Crust
During subduction, progressive heating and burial drive dehydration reactions that release H₂O-rich fluids from altered oceanic crust. Under sub-arc conditions (2–4 GPa), the transition from blueschist- to eclogite-facies mineral assemblages is accompanied by the release of substantial amounts of water (up to ~5 wt.%). If fluid transport occurs on timescales that are short relative to subduction, these fluids migrate through the overlying oceanic crust into the mantle wedge or along the slab–wedge interface. This process is critical for the generation of arc magmas and for their enrichment in fluid-mobile trace elements. Despite the importance of this process, relatively few direct constraints exist on the extent to which such fluids react with the eclogite-facies crust through which they migrate.Here, we present field, petrological and geochemical observations from a pristine suite of transport veins preserved in mafic eclogites of the Tauern Window, Eastern Alps. The veins are dominated by high-variance, quartz-rich mineral assemblages and are surrounded by well-developed, omphacite-dominated selvages. Phase equilibrium modeling indicates that vein formation occurred at or near peak pressure–temperature conditions of ~2.5 GPa and ~600 °C. A striking feature of the fluid–rock interaction is the near-complete consumption of garnet by the reactive fluid. Trace-element zoning in partially reacted garnet porphyroblasts records a fluid-driven dissolution–precipitation mechanism that mobilized middle and heavy rare earth elements (MREE and HREE). Isocon analysis of the altered eclogite selvages reveals bulk gains in Na and Li, accompanied by losses of REE, Sr, K, Cu, Fe, Al, Y, Mn, Ba, and Cr, while Ni, Sc, and Ti appear to have been conserved.Pure omphacite layers and seams are commonplace throughout the Eclogite Zone and are interpreted as sealed transport veins. The associated microstructures record embrittlement and fracturing following fluid–rock interaction. Collectively, these observations indicate that reactive fluid flow under eclogite-facies conditions may influence the rheology of subducting oceanic crust.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessLinking Reactive Fluid Flow to Rheology of Eclogite-Facies Oceanic Crust
During subduction, progressive heating and burial drive dehydration reactions that release H₂O-rich fluids from altered oceanic crust. Under sub-arc conditions (2–4 GPa), the transition from blueschist- to eclogite-facies mineral assemblages is accompanied by the release of substantial amounts of water (up to ~5 wt.%). If fluid transport occurs on timescales that are short relative to subduction, these fluids migrate through the overlying oceanic crust into the mantle wedge or along the slab–wedge interface. This process is critical for the generation of arc magmas and for their enrichment in fluid-mobile trace elements. Despite the importance of this process, relatively few direct constraints exist on the extent to which such fluids react with the eclogite-facies crust through which they migrate.Here, we present field, petrological and geochemical observations from a pristine suite of transport veins preserved in mafic eclogites of the Tauern Window, Eastern Alps. The veins are dominated by high-variance, quartz-rich mineral assemblages and are surrounded by well-developed, omphacite-dominated selvages. Phase equilibrium modeling indicates that vein formation occurred at or near peak pressure–temperature conditions of ~2.5 GPa and ~600 °C. A striking feature of the fluid–rock interaction is the near-complete consumption of garnet by the reactive fluid. Trace-element zoning in partially reacted garnet porphyroblasts records a fluid-driven dissolution–precipitation mechanism that mobilized middle and heavy rare earth elements (MREE and HREE). Isocon analysis of the altered eclogite selvages reveals bulk gains in Na and Li, accompanied by losses of REE, Sr, K, Cu, Fe, Al, Y, Mn, Ba, and Cr, while Ni, Sc, and Ti appear to have been conserved.Pure omphacite layers and seams are commonplace throughout the Eclogite Zone and are interpreted as sealed transport veins. The associated microstructures record embrittlement and fracturing following fluid–rock interaction. Collectively, these observations indicate that reactive fluid flow under eclogite-facies conditions may influence the rheology of subducting oceanic crust.
- Open Access
- 13 October 2025
- Published by Springer Nature in Nature Geoscience
- Vol. 18 (12) , 1296-1302
Ultra-hot origins of stable continents
- 13 October 2025
- Published by Springer Nature in Nature Geoscience
- Vol. 18 (12) , 1296-1302
Open AccessUltra-hot origins of stable continents
- Open Access
- 30 September 2025
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 26 (10)
Constraints on the Dehydration Systematics of Subducted Oceanic Crust Across the Blueschist‐to‐Eclogite Facies Transition (Eclogite Zone, Eastern Alps)
Mafic eclogites of the Tauern Window in the Eastern Alps preserve vein networks associated with eclogite‐facies mineral assemblages. The structural and mineralogical diversity of these veins is encapsulated by Type I veins, which resemble deformed tension gashes, and Type II quartz segregates with non‐planar morphologies. Within host eclogites, garnet growth occurred along a prograde P ‐ T path between 2.05 ± 0.10 GPa, 580 ± 15°C and 2.50 ± 0.10 GPa, 630 ± 15°C, consistent with conditions on the slab‐wedge interface of modern subduction zones. The dehydration of lawsonite and Na‐amphibole released ∼5 wt.% H 2 O over 20–35°C, creating ∼11% transient porosity. In situ oxygen isotope analysis of quartz‐rutile pairs constrains formation temperatures to between 460°C and 610°C for Type I and II vein structures. Individual veins preserve records of protracted crystallization over ∼100°C, suggesting that fluids remained undrained in the oceanic crust for 10 5 –10 6 years during subduction to ∼90 km. A simple petrological‐mechanical model for the blueschist‐to‐eclogite transition shows that under extremely low permeability (10 −22 to 10 −34 m 2 ), Type I veins may form by tensile failure during periods of high pore fluid pressure, whereas Type II quartz segregates represent accumulations of derived fluids during periods of lower fluid pressure. These findings imply that domains of oceanic crust with extreme low permeability may retain fluids released during the blueschist‐to‐eclogite past the depths of arc magma genesis.
- 30 September 2025
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 26 (10)
Open AccessConstraints on the Dehydration Systematics of Subducted Oceanic Crust Across the Blueschist‐to‐Eclogite Facies Transition (Eclogite Zone, Eastern Alps)
Mafic eclogites of the Tauern Window in the Eastern Alps preserve vein networks associated with eclogite‐facies mineral assemblages. The structural and mineralogical diversity of these veins is encapsulated by Type I veins, which resemble deformed tension gashes, and Type II quartz segregates with non‐planar morphologies. Within host eclogites, garnet growth occurred along a prograde P ‐ T path between 2.05 ± 0.10 GPa, 580 ± 15°C and 2.50 ± 0.10 GPa, 630 ± 15°C, consistent with conditions on the slab‐wedge interface of modern subduction zones. The dehydration of lawsonite and Na‐amphibole released ∼5 wt.% H 2 O over 20–35°C, creating ∼11% transient porosity. In situ oxygen isotope analysis of quartz‐rutile pairs constrains formation temperatures to between 460°C and 610°C for Type I and II vein structures. Individual veins preserve records of protracted crystallization over ∼100°C, suggesting that fluids remained undrained in the oceanic crust for 10 5 –10 6 years during subduction to ∼90 km. A simple petrological‐mechanical model for the blueschist‐to‐eclogite transition shows that under extremely low permeability (10 −22 to 10 −34 m 2 ), Type I veins may form by tensile failure during periods of high pore fluid pressure, whereas Type II quartz segregates represent accumulations of derived fluids during periods of lower fluid pressure. These findings imply that domains of oceanic crust with extreme low permeability may retain fluids released during the blueschist‐to‐eclogite past the depths of arc magma genesis.
- 2 June 2025
- Published by Springer Nature in Nature Geoscience
- Vol. 18 (7) , 653-660
Shear heating during rapid subduction initiation beneath the Samail Ophiolite
- 2 June 2025
- Published by Springer Nature in Nature Geoscience
- Vol. 18 (7) , 653-660
Shear heating during rapid subduction initiation beneath the Samail Ophiolite
- Open Access
- 31 March 2025
- Published by Wiley
Constraints on the dehydration systematics of subducted oceanic crust across the blueschist-to-eclogite facies transition (Eclogite Zone, Eastern Alps)
Mafic eclogites of the Tauern Window, Eastern Alps, preserve vein networks associated with eclogite-facies mineral assemblages. The structural diversity of these veins is encapsulated by two endmembers: Type I tensile veins that exhibit sharp contacts, discordant to the eclogite-facies foliation and Type II fluid segregates with non-planar morphologies. Compositional analysis reveals two main types of mafic eclogite: banded, low-silica and metagabbroic, high-silica compositions. Garnet growth occurred along a prograde P-T path between 2.0 ± 0.15 GPa, 585 ± 15°C and 2.5 ± 0.2 GPa, 630 ± 10°C, consistent with conditions on the slab-wedge interface of modern subduction zones. Dehydration of lawsonite and Na-amphibole released ~5 wt.% H₂O over 20-30°C, creating ~13% transient porosity. In-situ oxygen isotope analysis of quartz-rutile pairs constrains formation temperatures to between 460 °C and 610°C for Type I and II vein structures. Individual veins preserve records of protracted crystallization over ~80°C, suggesting that pockets of undrained fluid persisted in the oceanic crust for 105-106 years during subduction to sub-arc depths. A simple petrological-mechanical model for the blueschist-to-eclogite transition shows that under extremely low permeabilities (10-22 to 10-34 m2), Type I veins may form by tensile failure during periods of high pore fluid pressure, whereas Type II fluid segregates represent accumulations of locally derived fluids during periods of lower fluid pressure. The rate of lawsonite breakdown is intimately linked to hydraulic fracturing and embrittlement of the oceanic crust at depths where intermediate-to-deep seismicity occurs in cold subduction zones.
- 31 March 2025
- Published by Wiley
Open AccessConstraints on the dehydration systematics of subducted oceanic crust across the blueschist-to-eclogite facies transition (Eclogite Zone, Eastern Alps)
Mafic eclogites of the Tauern Window, Eastern Alps, preserve vein networks associated with eclogite-facies mineral assemblages. The structural diversity of these veins is encapsulated by two endmembers: Type I tensile veins that exhibit sharp contacts, discordant to the eclogite-facies foliation and Type II fluid segregates with non-planar morphologies. Compositional analysis reveals two main types of mafic eclogite: banded, low-silica and metagabbroic, high-silica compositions. Garnet growth occurred along a prograde P-T path between 2.0 ± 0.15 GPa, 585 ± 15°C and 2.5 ± 0.2 GPa, 630 ± 10°C, consistent with conditions on the slab-wedge interface of modern subduction zones. Dehydration of lawsonite and Na-amphibole released ~5 wt.% H₂O over 20-30°C, creating ~13% transient porosity. In-situ oxygen isotope analysis of quartz-rutile pairs constrains formation temperatures to between 460 °C and 610°C for Type I and II vein structures. Individual veins preserve records of protracted crystallization over ~80°C, suggesting that pockets of undrained fluid persisted in the oceanic crust for 105-106 years during subduction to sub-arc depths. A simple petrological-mechanical model for the blueschist-to-eclogite transition shows that under extremely low permeabilities (10-22 to 10-34 m2), Type I veins may form by tensile failure during periods of high pore fluid pressure, whereas Type II fluid segregates represent accumulations of locally derived fluids during periods of lower fluid pressure. The rate of lawsonite breakdown is intimately linked to hydraulic fracturing and embrittlement of the oceanic crust at depths where intermediate-to-deep seismicity occurs in cold subduction zones.
- Open Access
- 4 October 2024
- Published by Wiley
Frictional Properties and Healing Behavior of Tectonic Mélanges: Implications for the Evolution of Subduction Fault Zones
The frictional velocity dependence and healing behavior of subduction fault zones play key roles in the nucleation of stick-slip instabilities at convergent margins. Diagenetic to low-grade metamorphic processes such as pressure solution are proposed to be responsible for the change in frictional properties of fault materials along plate interfaces; pressure solution also likely contributes to the acceleration of healing according to previous studies. Here, we report velocity-step experiments using rocks collected from ancient subduction fault zones, the Lower Mugi and Makimine mélanges of the Cretaceous Shimanto belt. The two mélanges preserve paleotemperature records corresponding to the updip and downdip limits of the seismogenic zone and deformation recording a lower versus higher degree of pressure solution. Our data show that the Lower Mugi mélange sample exhibits velocity-weakening to velocity-neutral behavior under low normal stress, and the Makimine mélange sample shows velocity-strengthening behavior under high normal stress. This is consistent with the slip behavior observed at the depths they have been subducted to along the plate interface. We also perform a series of slide-hold-slide experiments under different hydrothermal conditions using the Lower Mugi mélange sample to evaluate the role of pressure solution in fault healing and its dependency on temperature. The results show that healing rates increase in tests operated at higher temperatures. The microstructures related to pressure solution found in the postexperimental gouges support the idea that the elevated healing rate can be related to pressure solution.
- 4 October 2024
- Published by Wiley
Open AccessFrictional Properties and Healing Behavior of Tectonic Mélanges: Implications for the Evolution of Subduction Fault Zones
The frictional velocity dependence and healing behavior of subduction fault zones play key roles in the nucleation of stick-slip instabilities at convergent margins. Diagenetic to low-grade metamorphic processes such as pressure solution are proposed to be responsible for the change in frictional properties of fault materials along plate interfaces; pressure solution also likely contributes to the acceleration of healing according to previous studies. Here, we report velocity-step experiments using rocks collected from ancient subduction fault zones, the Lower Mugi and Makimine mélanges of the Cretaceous Shimanto belt. The two mélanges preserve paleotemperature records corresponding to the updip and downdip limits of the seismogenic zone and deformation recording a lower versus higher degree of pressure solution. Our data show that the Lower Mugi mélange sample exhibits velocity-weakening to velocity-neutral behavior under low normal stress, and the Makimine mélange sample shows velocity-strengthening behavior under high normal stress. This is consistent with the slip behavior observed at the depths they have been subducted to along the plate interface. We also perform a series of slide-hold-slide experiments under different hydrothermal conditions using the Lower Mugi mélange sample to evaluate the role of pressure solution in fault healing and its dependency on temperature. The results show that healing rates increase in tests operated at higher temperatures. The microstructures related to pressure solution found in the postexperimental gouges support the idea that the elevated healing rate can be related to pressure solution.
- Open Access
- 30 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (8)
Xenolith Petrochronology (San Luis Potosi, Mexico) Constrains Heat Sources for Cenozoic Ultrahigh‐Temperature Metamorphism in the Lower Crust
Ultrahigh‐temperature (UHT; >900°C) metamorphism drives crustal differentiation and is widely recognized in the rock record, but its geodynamic causes are debated. Previous work on granulite‐facies metapelite xenoliths from San Luis Potosí, Mexico suggests the lower crust experienced a protracted UHT metamorphic event that coincided with the onset of regional extension. To determine the duration, conditions, and heat sources of UHT metamorphism recorded by these xenoliths, this study characterizes the major‐element, trace‐element, and U‐Pb isotopic systematics of quartz, rutile, feldspar, garnet, and zircon by in situ electron microprobe (EPMA) and laser‐ablation inductively coupled‐plasma mass spectrometry (LA‐ICP‐MS), and augments these data with detailed petrography, thermobarometry, phase equilibria modeling, and diffusion modeling. Thermobarometry and phase equilibria modeling suggest peak metamorphic conditions exceeded 0.7 GPa and 900°C. Zircon petrochronology confirms >15 Myr of UHT conditions since its onset at ∼30 Ma. A small population of zircon record elevated temperatures following transition from backarc compression to extension during the waning stages of orogenesis (60–37 Ma). Garnet preserves trace‐element zoning and mineral inclusions consistent with suprasolidus garnet growth and subsequent compositional modification by intracrystalline rare‐earth element diffusion during protracted heating, with diffusion chronometry timescales in agreement with zircon data, followed by fluid‐driven remobilization of trace elements along now‐healed fractures within ∼1 Myr of eruption. In sum, these data are most compatible with lithospheric mantle attenuation or removal as the dominant heat transport mechanism driving synextensional UHT metamorphism and crustal melting, which has bearing on models for crustal differentiation and formation of modern and ancient granulite terranes globally.
- 30 July 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (8)
Open AccessXenolith Petrochronology (San Luis Potosi, Mexico) Constrains Heat Sources for Cenozoic Ultrahigh‐Temperature Metamorphism in the Lower Crust
Ultrahigh‐temperature (UHT; >900°C) metamorphism drives crustal differentiation and is widely recognized in the rock record, but its geodynamic causes are debated. Previous work on granulite‐facies metapelite xenoliths from San Luis Potosí, Mexico suggests the lower crust experienced a protracted UHT metamorphic event that coincided with the onset of regional extension. To determine the duration, conditions, and heat sources of UHT metamorphism recorded by these xenoliths, this study characterizes the major‐element, trace‐element, and U‐Pb isotopic systematics of quartz, rutile, feldspar, garnet, and zircon by in situ electron microprobe (EPMA) and laser‐ablation inductively coupled‐plasma mass spectrometry (LA‐ICP‐MS), and augments these data with detailed petrography, thermobarometry, phase equilibria modeling, and diffusion modeling. Thermobarometry and phase equilibria modeling suggest peak metamorphic conditions exceeded 0.7 GPa and 900°C. Zircon petrochronology confirms >15 Myr of UHT conditions since its onset at ∼30 Ma. A small population of zircon record elevated temperatures following transition from backarc compression to extension during the waning stages of orogenesis (60–37 Ma). Garnet preserves trace‐element zoning and mineral inclusions consistent with suprasolidus garnet growth and subsequent compositional modification by intracrystalline rare‐earth element diffusion during protracted heating, with diffusion chronometry timescales in agreement with zircon data, followed by fluid‐driven remobilization of trace elements along now‐healed fractures within ∼1 Myr of eruption. In sum, these data are most compatible with lithospheric mantle attenuation or removal as the dominant heat transport mechanism driving synextensional UHT metamorphism and crustal melting, which has bearing on models for crustal differentiation and formation of modern and ancient granulite terranes globally.
- Open Access
- 20 July 2024
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 25 (7)
Thinning and Heating of Laramide Continental Lower Crust Recorded by Zircon Petrochronology
Zircon grains from the metasedimentary lower crust of the Rio Grande Rift, New Mexico, preserve a metamorphic record of the transition from Laramide compression to Eocene extension. Zircon U‐Pb isotopes and trace‐element concentrations from five two‐pyroxene metaigneous granulite xenoliths define discrete populations: older zircon cores (∼15–50 Ma) that are depleted in heavy rare‐earth elements (HREE) but Ti‐rich, and younger zircon rims (∼3–15 Ma) with elevated HREE and lower Ti concentrations. Coupled phase equilibria and garnet‐melt‐zircon trace‐element partitioning calculations show that the older zircon cores equilibrated in thick (>40 km), hot (800–900°C), garnet‐bearing lower crust during the cessation of compression at the end of the Laramide orogeny. Zircon rim domains equilibrated at lower pressures, consistent with >9 km of thinning of the lower crust. Thermal‐kinematic calculations show that these pressure‐temperature‐time constraints require thinning of the lithospheric mantle prior to and during regional Cenozoic extension. Convective erosion of the mantle lithosphere over tens of millions of years, possibly facilitated by dynamics of the Farallon slab, provides a mechanism to facilitate lower crustal heating and extension.
- 20 July 2024
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 25 (7)
Open AccessThinning and Heating of Laramide Continental Lower Crust Recorded by Zircon Petrochronology
Zircon grains from the metasedimentary lower crust of the Rio Grande Rift, New Mexico, preserve a metamorphic record of the transition from Laramide compression to Eocene extension. Zircon U‐Pb isotopes and trace‐element concentrations from five two‐pyroxene metaigneous granulite xenoliths define discrete populations: older zircon cores (∼15–50 Ma) that are depleted in heavy rare‐earth elements (HREE) but Ti‐rich, and younger zircon rims (∼3–15 Ma) with elevated HREE and lower Ti concentrations. Coupled phase equilibria and garnet‐melt‐zircon trace‐element partitioning calculations show that the older zircon cores equilibrated in thick (>40 km), hot (800–900°C), garnet‐bearing lower crust during the cessation of compression at the end of the Laramide orogeny. Zircon rim domains equilibrated at lower pressures, consistent with >9 km of thinning of the lower crust. Thermal‐kinematic calculations show that these pressure‐temperature‐time constraints require thinning of the lithospheric mantle prior to and during regional Cenozoic extension. Convective erosion of the mantle lithosphere over tens of millions of years, possibly facilitated by dynamics of the Farallon slab, provides a mechanism to facilitate lower crustal heating and extension.