Ana Paula Duarte
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ana Paula Duarte has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Joao Carlos Bordado
IST, Universidade de Lisboa
7 shared publications - Maria Teresa Cidade
Departamento de Ciência dos Materiais and CENIMAT/I3N, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Caparica, Portugal
7 shared publications - Catarina Rosa Leal
Department of Physics, ISEL—Instituto Superior de Engenharia de Lisboa, Instituto Politécnico de Lisboa, Rua Conselheiro Emídio Navarro 1, 1959-007 Lisbon, Portugal
2 shared publications - João Manuel Maia
Department of Macromolecular Science and Engineering Case Western Reserve University Cleveland Ohio USA
2 shared publications S. Filipe
Departamento de Ciência dos Materiais and CENIMAT, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Campus da Caparica, 2829‐516 Caparica, Portugal
2 shared publicationsA.R. Menon
1 shared publication
Latest Publications
- Open Access
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Assessment of Early Fracture Risk Using Thermochromic Cholesteric Liquid Crystal Systems
Liquid Crystals (LCs) have been extensively studied, due to their features, namely their capability to alter their properties, such as their color, as a response to external inputs, such as humidity, temperature and pressure, presenting a promising class of materials to be employed in stimuli-responsive and smart-sensing applications. Within the different phases which LCs can exhibit, cholesteric LCs (CLCs) have attracted growing interest, attributed to their tunability and capability to selectively reflect circularly polarised light, which enables the control of the reflected wavelength. Given that the deterioration of civil structures is influenced by environmental factors, this study aimed to develop CLC-based temperature-sensitive devices for continuous temperature monitoring, which allows the inference of the risk of early fracture formation. For this effect, polymer-dispersed CLC (PDCLC)-based thermochromic devices were produced. CLC microdroplets were first prepared by mixing cholesteryl oleyl carbonate (COC) and 4-cyano-4’-pentylbiphenyl (5CB) and were then dispersed onto different matrices – polyurethane, polydimethylsiloxane (PDMS), cellulose acetate (CA), acetoxy propyl cellulose (APC) and APC/PDMS. The sensorial capabilities of the devices were tested by subjecting them to thermal cycles to assess whether it led to a change in color. It was concluded that apart from the dispersion in polyurethane, all devices exhibited a temperature-dependent color change, with the most pronounced shift being observed in the PDMS-based systems.
- 9 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Open AccessAssessment of Early Fracture Risk Using Thermochromic Cholesteric Liquid Crystal Systems
Liquid Crystals (LCs) have been extensively studied, due to their features, namely their capability to alter their properties, such as their color, as a response to external inputs, such as humidity, temperature and pressure, presenting a promising class of materials to be employed in stimuli-responsive and smart-sensing applications. Within the different phases which LCs can exhibit, cholesteric LCs (CLCs) have attracted growing interest, attributed to their tunability and capability to selectively reflect circularly polarised light, which enables the control of the reflected wavelength. Given that the deterioration of civil structures is influenced by environmental factors, this study aimed to develop CLC-based temperature-sensitive devices for continuous temperature monitoring, which allows the inference of the risk of early fracture formation. For this effect, polymer-dispersed CLC (PDCLC)-based thermochromic devices were produced. CLC microdroplets were first prepared by mixing cholesteryl oleyl carbonate (COC) and 4-cyano-4’-pentylbiphenyl (5CB) and were then dispersed onto different matrices – polyurethane, polydimethylsiloxane (PDMS), cellulose acetate (CA), acetoxy propyl cellulose (APC) and APC/PDMS. The sensorial capabilities of the devices were tested by subjecting them to thermal cycles to assess whether it led to a change in color. It was concluded that apart from the dispersion in polyurethane, all devices exhibited a temperature-dependent color change, with the most pronounced shift being observed in the PDMS-based systems.
- Open Access
- 2 February 2015
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 2
Cork – A Renewable Raw Material: Forecast of Industrial Potential and Development Priorities
This article aims to report the main applications of cork material from ancient times until nowadays, describing its industrial potential for other applications under study. It is also described the cork origin, the extraction process and the relationship between composition and cellular structure with properties.
- 2 February 2015
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 2
Open AccessCork – A Renewable Raw Material: Forecast of Industrial Potential and Development Priorities
This article aims to report the main applications of cork material from ancient times until nowadays, describing its industrial potential for other applications under study. It is also described the cork origin, the extraction process and the relationship between composition and cellular structure with properties.
- 30 October 2013
- Published by Wiley in Macromolecular Symposia
- Vol. 331-332 (1) , 97-108
Functional Polyesters
- 30 October 2013
- Published by Wiley in Macromolecular Symposia
- Vol. 331-332 (1) , 97-108
Functional Polyesters
- 1 January 2013
- Published by Elsevier in Ciência & Tecnologia dos Materiais
- Vol. 25 (1) , 67-69
Materials engineering with elastomers-How to select an elastomer?
- 1 January 2013
- Published by Elsevier in Ciência & Tecnologia dos Materiais
- Vol. 25 (1) , 67-69
Materials engineering with elastomers-How to select an elastomer?
- Top Cited Papers
- 1 August 2012
- Published by Elsevier in Progress in Polymer Science
- Vol. 37 (8) , 1031-1050
Surgical adhesives: Systematic review of the main types and development forecast
- 1 August 2012
- Published by Elsevier in Progress in Polymer Science
- Vol. 37 (8) , 1031-1050
Top Cited PapersSurgical adhesives: Systematic review of the main types and development forecast
- 6 May 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2321-2328
Influence to the performance of cellulose acetate reverse osmosis membranes by fibers addition
The asymmetric membranes based on cellulose acetate are mainly applied for separations in aqueous systems and in reverse osmosis processes, although they can also be used in the so‐called salinity process of energy generation. These applications require membranes with considerable water permeability and high salt rejection. In this paper the improvements resulting from the addition of two different types of fibers on the permeability performance of the membranes (water permeability and salt rejection) as well as on mechanical properties are presented. Concerning the water permeability and salt rejection, the influence of four different contents of cellulosic fibers (CF) and anionic diethylaminoethyl cellulose (DEAE) fibers has been studied and the optimum value was chosen after measuring water permeability and salt rejection of the membranes. To study the mechanical performance, membranes with six different contents of these two types of fibers were produced. Both permeability and mechanical test results obtained for membranes with different contents of fibers were compared with the ones for the membranes produced from the same solution but without fibers. In terms of permeability tests, the membranes with 0.5 wt % CF fibers present the best results, with water permeability 22.8% higher than the membrane without fibers, while the salt rejection only decreases by 7.3%. Concerning the mechanical properties, the best membrane would be the one with 3 wt % CF fibers, however the membrane with 0.5 wt % CF fibers still present a toughness 18.9% higher than the membrane without fibers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 6 May 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 109 (4) , 2321-2328
Influence to the performance of cellulose acetate reverse osmosis membranes by fibers addition
The asymmetric membranes based on cellulose acetate are mainly applied for separations in aqueous systems and in reverse osmosis processes, although they can also be used in the so‐called salinity process of energy generation. These applications require membranes with considerable water permeability and high salt rejection. In this paper the improvements resulting from the addition of two different types of fibers on the permeability performance of the membranes (water permeability and salt rejection) as well as on mechanical properties are presented. Concerning the water permeability and salt rejection, the influence of four different contents of cellulosic fibers (CF) and anionic diethylaminoethyl cellulose (DEAE) fibers has been studied and the optimum value was chosen after measuring water permeability and salt rejection of the membranes. To study the mechanical performance, membranes with six different contents of these two types of fibers were produced. Both permeability and mechanical test results obtained for membranes with different contents of fibers were compared with the ones for the membranes produced from the same solution but without fibers. In terms of permeability tests, the membranes with 0.5 wt % CF fibers present the best results, with water permeability 22.8% higher than the membrane without fibers, while the salt rejection only decreases by 7.3%. Concerning the mechanical properties, the best membrane would be the one with 3 wt % CF fibers, however the membrane with 0.5 wt % CF fibers still present a toughness 18.9% higher than the membrane without fibers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
- 5 March 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (5) , 3001-3009
Synthesis of compatibilizers and characterization of the compatibilized and noncompatibilized blends of PP/Rodrun LC3000
- 5 March 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (5) , 3001-3009
Synthesis of compatibilizers and characterization of the compatibilized and noncompatibilized blends of PP/Rodrun LC3000
- 23 October 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 103 (1) , 134-139
Cellulose acetate reverse osmosis membranes: Optimization of preparation parameters
Asymmetric cellulose acetate based membranes usually employed in reverse osmosis as well as in separations in aqueous systems can possibly be applied in the so‐called salinity process of energy generation. For these applications, membranes with a relatively high water permeability (sometimes also called water flux) and low salt permeability (or high salt rejection) are required. In this study the authors present the optimization of such membranes, which concerns the preparation parameters. The membranes studied were prepared from a solution whose composition were previously optimized.4 The authors concluded that the optimum preparation parameters are as follows: thickness of the liquid film of 100 μm; 30 s allowed for evaporation of the solvent; and temperature of coagulation bath of 0–4°C and 80–85°C as annealing temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 134–139, 2007
- 23 October 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 103 (1) , 134-139
Cellulose acetate reverse osmosis membranes: Optimization of preparation parameters
Asymmetric cellulose acetate based membranes usually employed in reverse osmosis as well as in separations in aqueous systems can possibly be applied in the so‐called salinity process of energy generation. For these applications, membranes with a relatively high water permeability (sometimes also called water flux) and low salt permeability (or high salt rejection) are required. In this study the authors present the optimization of such membranes, which concerns the preparation parameters. The membranes studied were prepared from a solution whose composition were previously optimized.4 The authors concluded that the optimum preparation parameters are as follows: thickness of the liquid film of 100 μm; 30 s allowed for evaporation of the solvent; and temperature of coagulation bath of 0–4°C and 80–85°C as annealing temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 134–139, 2007
- 27 March 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 100 (5) , 4052-4058
Cellulose acetate reverse osmosis membranes: Optimization of the composition
Membranes based on cellulose acetate for reverse osmosis can possibly be applied to the so‐called salinity process of energy generation and water desalinization. The requirements for membranes for these two different applications are a relatively high water flux and low salt permeability. In this article, we present the optimization of the composition of such membranes. We started by producing membranes with a patented casting solution with the following composition: 45.77 wt % dioxane, 17.61 wt % acetone, and 8.45 wt % acetic acid (solvents); 14.09 wt % methanol (nonsolvent); and 7.04 wt % cellulose diacetate and 7.04 wt % cellulose triacetate. The membranes produced with this solution were analyzed comparatively, with the membranes obtained by the introduction of modifications to the following parameters: the solvent mix, the nonsolvent mix, the proportion of cellulose diacetate and cellulose triacetate in the casting solution, and the addition of reinforcing cellulose fibers. The results led us to conclude that the best membrane formulation had the following composition: 45.77 wt % dioxane, 17.61 wt % acetone, and 8.45 wt % acetic acid (solvents); 4.22 wt % cellulose triacetate and 9.86 wt % cellulose diacetate (polymers); 14.09 wt % methanol (nonsolvent); and 0.5 wt % cellulose fibers (with respect to the total polymer content). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4052–4058, 2006
- 27 March 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 100 (5) , 4052-4058
Cellulose acetate reverse osmosis membranes: Optimization of the composition
Membranes based on cellulose acetate for reverse osmosis can possibly be applied to the so‐called salinity process of energy generation and water desalinization. The requirements for membranes for these two different applications are a relatively high water flux and low salt permeability. In this article, we present the optimization of the composition of such membranes. We started by producing membranes with a patented casting solution with the following composition: 45.77 wt % dioxane, 17.61 wt % acetone, and 8.45 wt % acetic acid (solvents); 14.09 wt % methanol (nonsolvent); and 7.04 wt % cellulose diacetate and 7.04 wt % cellulose triacetate. The membranes produced with this solution were analyzed comparatively, with the membranes obtained by the introduction of modifications to the following parameters: the solvent mix, the nonsolvent mix, the proportion of cellulose diacetate and cellulose triacetate in the casting solution, and the addition of reinforcing cellulose fibers. The results led us to conclude that the best membrane formulation had the following composition: 45.77 wt % dioxane, 17.61 wt % acetone, and 8.45 wt % acetic acid (solvents); 4.22 wt % cellulose triacetate and 9.86 wt % cellulose diacetate (polymers); 14.09 wt % methanol (nonsolvent); and 0.5 wt % cellulose fibers (with respect to the total polymer content). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4052–4058, 2006