Yosslen Aray
Research Subjects
Research Interests
Yosslen Aray has a total of 102 co-authors. Here are the top co-authors by number of shared publications:
Juan Murgich
Centro de Química, IVIC, Apartado 21827, Caracas 1020A, Venezuela
15 shared publicationsDavid Vega
FACYT. Universidad de Carabobo. Valencia, Venezuela
10 shared publicationsJesus Rodriguez
Centro de Química, IVIC, Apartado 21827. Caracas 1020 A, Venezuela
10 shared publicationsJesús Rodríguez
Instituto Venezolano de Investigaciones Científicas, Centro de Química, Caracas, Venezuela
9 shared publications- José Gregorio Parra
Department of Forest Biomaterials, North Carolina State University, 431 Dan Allen Dr, Raleigh, NC, USA
7 shared publications Jesus Rodríguez
Centro de Química, IVIC, Apartado 21827, Caracas 1020A, Venezuela
6 shared publications
Latest Publications
- Open Access
- 15 June 2019
- Published by Universidad San Francisco De Quito in ACI Avances en Ciencias e Ingenierías
- Vol. 11 (2)
Distribución del 1-butanol y 2-butanol en los sistemas agua/n-octano y agua/Dodecil ´Sulfato de Sodio (SDS)/n-octano usando dinámica molecular. Parte II. Uso de las herramientas gmx-density y gmx-densmap
En este trabajo, la distribución de las moléculas de 1-butanol y 2-butanol en los sistemas agua/n-octano y agua/SDS/n-octano fue determinada usando las herramientas gmx-density y gmx-densmap del programa gromacs con la finalidad de complementar a nivel computacional el comportamiento experimental estos co-surfactantes cuando están localizados en la región interfacial de estos sistemas. Los modelos de energía potencial GROMOS53A6 y SPC fueron utilizados para describir a las moléculas de 1-butanol, 2-butanol, SDS y agua, respectivamente. Estos modelos fueron capaces de predecir las propiedades interfaciales del sistema agua/n-octano y el área por molécula del Dodecil Sulfato de Sodio en la interfaz agua/n-octano de forma consistente. Finalmente, los perfiles y mapas de densidad demuestran que las moléculas de alcohol y SDS coexisten en la región interfacial del sistema agua/n-octano favoreciendo la estabilidad de la monocapa de surfactante y la película interfacial. viewed = 671 times
- 15 June 2019
- Published by Universidad San Francisco De Quito in ACI Avances en Ciencias e Ingenierías
- Vol. 11 (2)
Open AccessDistribución del 1-butanol y 2-butanol en los sistemas agua/n-octano y agua/Dodecil ´Sulfato de Sodio (SDS)/n-octano usando dinámica molecular. Parte II. Uso de las herramientas gmx-density y gmx-densmap
En este trabajo, la distribución de las moléculas de 1-butanol y 2-butanol en los sistemas agua/n-octano y agua/SDS/n-octano fue determinada usando las herramientas gmx-density y gmx-densmap del programa gromacs con la finalidad de complementar a nivel computacional el comportamiento experimental estos co-surfactantes cuando están localizados en la región interfacial de estos sistemas. Los modelos de energía potencial GROMOS53A6 y SPC fueron utilizados para describir a las moléculas de 1-butanol, 2-butanol, SDS y agua, respectivamente. Estos modelos fueron capaces de predecir las propiedades interfaciales del sistema agua/n-octano y el área por molécula del Dodecil Sulfato de Sodio en la interfaz agua/n-octano de forma consistente. Finalmente, los perfiles y mapas de densidad demuestran que las moléculas de alcohol y SDS coexisten en la región interfacial del sistema agua/n-octano favoreciendo la estabilidad de la monocapa de surfactante y la película interfacial. viewed = 671 times
- 22 May 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 123 (23) , 14421-14431
Nature of the Active Sites of Molybdenum-Based Catalysts and Their Interaction with Sulfur- and Nitrogen-Containing Molecules Using the Quantum Theory of Atoms in Molecules and the Molecular Electrostatic Potential
- 22 May 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 123 (23) , 14421-14431
Nature of the Active Sites of Molybdenum-Based Catalysts and Their Interaction with Sulfur- and Nitrogen-Containing Molecules Using the Quantum Theory of Atoms in Molecules and the Molecular Electrostatic Potential
- 12 July 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (31) , 20417-20426
Exploring the electron density localization in MoS2nanoparticles using a localized-electron detector: Unraveling the origin of the one-dimensional metallic sites on MoS2catalysts
The nature of the electron density localization in two MoS2nanoclusters containing eight rows of Mo atoms, one with 100% sulphur coverage at the Mo edges (n8_100S) and the other with 50% coverage (n8_50S) was studied using a localized-electron detector function defined in the local moment representation.
- 12 July 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (31) , 20417-20426
Exploring the electron density localization in MoS2nanoparticles using a localized-electron detector: Unraveling the origin of the one-dimensional metallic sites on MoS2catalysts
The nature of the electron density localization in two MoS2nanoclusters containing eight rows of Mo atoms, one with 100% sulphur coverage at the Mo edges (n8_100S) and the other with 50% coverage (n8_50S) was studied using a localized-electron detector function defined in the local moment representation.
- 2 January 2018
- Published by Taylor & Francis in Journal of Biomolecular Structure and Dynamics
- Vol. 37 (1) , 48-64
Exploring the nature of the H-bonds between the human class II MHC protein, HLA-DR1 (DRB*0101) and the influenza virus hemagglutinin peptide, HA306-318, using the quantum theory of atoms in molecules
The nature of the H-bonds between the human protein HLA-DR1 (DRB*0101) and the hemagglutinin peptide HA306-318 has been studied using the Quantum Theory of Atoms in Molecules for the first time. We have found four H-bond groups: one conventional CO··HN bond group and three nonconventional CO··HC, π··HC involving aromatic rings and HN··HCaliphatic groups. The calculated electron density at the determined H-bond critical points suggests the follow protein pocket binding trend: P1 (2,311) >> P9 (1.109) > P4 (0.950) > P6 (0.553) > P7 (0.213) which agrees and reveal the nature of experimental findings, showing that P1 produces by a long way the strongest binding of the HLA-DR1 human protein molecule with the peptide backbone as consequence of the vast number of H-bonds in the P1 area and at the same time the largest specific binding of the peptide Tyr308 residue with aromatic residues located at the binding groove floor. The present results suggest the topological analysis of the electronic density as a valuable tool that allows a non-arbitrary partition of the pockets binding energy via the calculated electron density at the determined critical points.
- 2 January 2018
- Published by Taylor & Francis in Journal of Biomolecular Structure and Dynamics
- Vol. 37 (1) , 48-64
Exploring the nature of the H-bonds between the human class II MHC protein, HLA-DR1 (DRB*0101) and the influenza virus hemagglutinin peptide, HA306-318, using the quantum theory of atoms in molecules
The nature of the H-bonds between the human protein HLA-DR1 (DRB*0101) and the hemagglutinin peptide HA306-318 has been studied using the Quantum Theory of Atoms in Molecules for the first time. We have found four H-bond groups: one conventional CO··HN bond group and three nonconventional CO··HC, π··HC involving aromatic rings and HN··HCaliphatic groups. The calculated electron density at the determined H-bond critical points suggests the follow protein pocket binding trend: P1 (2,311) >> P9 (1.109) > P4 (0.950) > P6 (0.553) > P7 (0.213) which agrees and reveal the nature of experimental findings, showing that P1 produces by a long way the strongest binding of the HLA-DR1 human protein molecule with the peptide backbone as consequence of the vast number of H-bonds in the P1 area and at the same time the largest specific binding of the peptide Tyr308 residue with aromatic residues located at the binding groove floor. The present results suggest the topological analysis of the electronic density as a valuable tool that allows a non-arbitrary partition of the pockets binding energy via the calculated electron density at the determined critical points.
- Open Access
- 1 November 2017
- Published by AIP Publishing in AIP Advances
- Vol. 7 (11)
Exploring the electron density localization in single MoS2 monolayers by means of a localize-electrons detector and the quantum theory of atoms in molecules
The nature of the electron density localization in a MoS2 monolayer under 0 % to 11% tensile strain has been systematically studied by means of a localized electron detector function and the Quantum Theory of atoms in molecules. At 10% tensile strain, this monolayer become metallic. It was found that for less than 6.5% of applied stress, the same atomic structure of the equilibrium geometry (0% strain) is maintained; while over 6.5% strain induces a transformation to a structure where the sulfur atoms placed on the top and bottom layer form S2 groups. The localized electron detector function shows the presence of zones of highly electron delocalization extending throughout the Mo central layer. For less than 10% tensile strain, these zones comprise the BCPs and the remainder CPs in separates regions of the space; while for the structures beyond 10% strain, all the critical points are involved in a region of highly delocalized electrons that extends throughout the material. This dissimilar electron localization pattern is like to that previously reported for semiconductors such as Ge bulk and metallic systems such as transition metals bulk.
- 1 November 2017
- Published by AIP Publishing in AIP Advances
- Vol. 7 (11)
Open AccessExploring the electron density localization in single MoS2 monolayers by means of a localize-electrons detector and the quantum theory of atoms in molecules
The nature of the electron density localization in a MoS2 monolayer under 0 % to 11% tensile strain has been systematically studied by means of a localized electron detector function and the Quantum Theory of atoms in molecules. At 10% tensile strain, this monolayer become metallic. It was found that for less than 6.5% of applied stress, the same atomic structure of the equilibrium geometry (0% strain) is maintained; while over 6.5% strain induces a transformation to a structure where the sulfur atoms placed on the top and bottom layer form S2 groups. The localized electron detector function shows the presence of zones of highly electron delocalization extending throughout the Mo central layer. For less than 10% tensile strain, these zones comprise the BCPs and the remainder CPs in separates regions of the space; while for the structures beyond 10% strain, all the critical points are involved in a region of highly delocalized electrons that extends throughout the material. This dissimilar electron localization pattern is like to that previously reported for semiconductors such as Ge bulk and metallic systems such as transition metals bulk.
- 12 June 2017
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 146 (22) , 224504
On the electron density localization in elemental cubic ceramic and FCC transition metals by means of a localized electrons detector
The electron density localization in insulator and semiconductor elemental cubic materials with diamond structure, carbon, silicon, germanium, and tin, and good metallic conductors with face centered cubic structure such as α-Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, and Au, was studied using a localized electrons detector defined in the local moment representation. Our results clearly show an opposite pattern of the electron density localization for the cubic ceramic and transition metal materials. It was found that, for the elemental ceramic materials, the zone of low electron localization is very small and is mainly localized on the atomic basin edges. On the contrary, for the transition metals, there are low-valued localized electrons detector isocontours defining a zone of highly delocalized electrons that extends throughout the material. We have found that the best conductors are those in which the electron density at this low-value zone is the lowest.
- 12 June 2017
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 146 (22) , 224504
On the electron density localization in elemental cubic ceramic and FCC transition metals by means of a localized electrons detector
The electron density localization in insulator and semiconductor elemental cubic materials with diamond structure, carbon, silicon, germanium, and tin, and good metallic conductors with face centered cubic structure such as α-Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, and Au, was studied using a localized electrons detector defined in the local moment representation. Our results clearly show an opposite pattern of the electron density localization for the cubic ceramic and transition metal materials. It was found that, for the elemental ceramic materials, the zone of low electron localization is very small and is mainly localized on the atomic basin edges. On the contrary, for the transition metals, there are low-valued localized electrons detector isocontours defining a zone of highly delocalized electrons that extends throughout the material. We have found that the best conductors are those in which the electron density at this low-value zone is the lowest.
- 1 February 2017
- Published by European Society of Computational Methods in Sciences and Engineering in Journal of Computational Methods in Sciences and Engineering
- Vol. 17 (1) , 39-53
Exploring the effect of the O-(1-heptylnonyl) benzene sulfonate surfactant on the nature of the linear hydrocarbons/water interface by means of an atomistic molecular dynamics simulation
Using molecular dynamics simulations a systematic study of the binding energy per cross sectional area for the water/n-alkane (hexane, octane, decane, dodecane and tetradecane) interfaces was performed. The effect of the Sodium p-(1-heptylnonyl) benzene sulfonate surfactant, on the adhesion forces of the water/n-hydrocarbon (decane, undecane, dodecane, and tetradecane) interfaces was studied. Scanning of the binding energy per area against n-alkanes shows that the magnitude of this parameter for the surfactant tail-alkane interactions at the interface systematically increases with the chain length of the alkane, whereas it shows a maximum at undecane for the water-surfactant head interactions at the interface. This maximum of head adhesion forces thus agrees with the reported minimum value of the interfacial tension at undecane for the p-(1-heptylnonyl) benzene sulfonate, suggests that for the water/alkane interface it is this trend in surfactant head adhesion at the interface that defines that interfacial tension minimum value.
- 1 February 2017
- Published by European Society of Computational Methods in Sciences and Engineering in Journal of Computational Methods in Sciences and Engineering
- Vol. 17 (1) , 39-53
Exploring the effect of the O-(1-heptylnonyl) benzene sulfonate surfactant on the nature of the linear hydrocarbons/water interface by means of an atomistic molecular dynamics simulation
Using molecular dynamics simulations a systematic study of the binding energy per cross sectional area for the water/n-alkane (hexane, octane, decane, dodecane and tetradecane) interfaces was performed. The effect of the Sodium p-(1-heptylnonyl) benzene sulfonate surfactant, on the adhesion forces of the water/n-hydrocarbon (decane, undecane, dodecane, and tetradecane) interfaces was studied. Scanning of the binding energy per area against n-alkanes shows that the magnitude of this parameter for the surfactant tail-alkane interactions at the interface systematically increases with the chain length of the alkane, whereas it shows a maximum at undecane for the water-surfactant head interactions at the interface. This maximum of head adhesion forces thus agrees with the reported minimum value of the interfacial tension at undecane for the p-(1-heptylnonyl) benzene sulfonate, suggests that for the water/alkane interface it is this trend in surfactant head adhesion at the interface that defines that interfacial tension minimum value.
- Open Access
- 13 July 2016
- Published by Universidad San Francisco De Quito in ACI Avances en Ciencias e Ingenierías
- Vol. 8 (14)
Comportamiento del SDS localizado en la región interfacial del sistema agua/n-octano. Un estudio usando dinámica molecular
En este trabajo, usando dinámica molecular se determinaron las propiedades interfaciales y el comportamiento del Dodecil Sulfato de Sodio (SDS) ubicado en la región interfacial de los sistemas vacío/agua y agua/n-octano. La tensión interfacial fue estimada con el modelo propuesto por Kirkwood y Buff [23]. A su vez, los espesores de película interfacial fueron determinados usando los criterios 10-90 y 90-90. Además, el área por molécula fue estimado con la variación de la presión superficial en función de la concentración del surfactante. En los sistemas vacío/SDS/agua, el área por molécula del SDS fue obtenida con dos procedimientos diferentes. Los valores fueron 53.3 Å2 y 54.3 Å2, respectivamente. Para los sistemas agua/n-octano y agua/SDS/n-octano, los espesores de película interfacial aumentan en función del número de moléculas de surfactantes presentes en la región interfacial. Los resultados obtenidos son consistentes con datos medidos por experimentación.
- 13 July 2016
- Published by Universidad San Francisco De Quito in ACI Avances en Ciencias e Ingenierías
- Vol. 8 (14)
Open AccessComportamiento del SDS localizado en la región interfacial del sistema agua/n-octano. Un estudio usando dinámica molecular
En este trabajo, usando dinámica molecular se determinaron las propiedades interfaciales y el comportamiento del Dodecil Sulfato de Sodio (SDS) ubicado en la región interfacial de los sistemas vacío/agua y agua/n-octano. La tensión interfacial fue estimada con el modelo propuesto por Kirkwood y Buff [23]. A su vez, los espesores de película interfacial fueron determinados usando los criterios 10-90 y 90-90. Además, el área por molécula fue estimado con la variación de la presión superficial en función de la concentración del surfactante. En los sistemas vacío/SDS/agua, el área por molécula del SDS fue obtenida con dos procedimientos diferentes. Los valores fueron 53.3 Å2 y 54.3 Å2, respectivamente. Para los sistemas agua/n-octano y agua/SDS/n-octano, los espesores de película interfacial aumentan en función del número de moléculas de surfactantes presentes en la región interfacial. Los resultados obtenidos son consistentes con datos medidos por experimentación.
- Open Access
- 13 July 2016
- Published by Universidad San Francisco De Quito in ACI Avances en Ciencias e Ingenierías
- Vol. 8 (1)
Comportamiento del SDS localizado en la región interfacial del sistema agua/n-octano. Un estudio usando dinámica molecular
En este trabajo, usando dinámica molecular se determinaron las propiedades interfaciales y el comportamiento del Dodecil Sulfato de Sodio (SDS) ubicado en la región interfacial de los sistemas vacío/agua y agua/n-octano. La tensión interfacial fue estimada con el modelo propuesto por Kirkwood y Buff [23]. A su vez, los espesores de película interfacial fueron determinados usando los criterios 10-90 y 90-90. Además, el área por molécula fue estimado con la variación de la presión superficial en función de la concentración del surfactante. En los sistemas vacío/SDS/agua, el área por molécula del SDS fue obtenida con dos procedimientos diferentes. Los valores fueron 53.3 Ã…2 y 54.3 Ã…2, respectivamente. Para los sistemas agua/n-octano y agua/SDS/n-octano, los espesores de película interfacial aumentan en función del número de moléculas de surfactantes presentes en la región interfacial. Los resultados obtenidos son consistentes con datos medidos por experimentación.
- 13 July 2016
- Published by Universidad San Francisco De Quito in ACI Avances en Ciencias e Ingenierías
- Vol. 8 (1)
Open AccessComportamiento del SDS localizado en la región interfacial del sistema agua/n-octano. Un estudio usando dinámica molecular
En este trabajo, usando dinámica molecular se determinaron las propiedades interfaciales y el comportamiento del Dodecil Sulfato de Sodio (SDS) ubicado en la región interfacial de los sistemas vacío/agua y agua/n-octano. La tensión interfacial fue estimada con el modelo propuesto por Kirkwood y Buff [23]. A su vez, los espesores de película interfacial fueron determinados usando los criterios 10-90 y 90-90. Además, el área por molécula fue estimado con la variación de la presión superficial en función de la concentración del surfactante. En los sistemas vacío/SDS/agua, el área por molécula del SDS fue obtenida con dos procedimientos diferentes. Los valores fueron 53.3 Ã…2 y 54.3 Ã…2, respectivamente. Para los sistemas agua/n-octano y agua/SDS/n-octano, los espesores de película interfacial aumentan en función del número de moléculas de surfactantes presentes en la región interfacial. Los resultados obtenidos son consistentes con datos medidos por experimentación.