Antonio Bermejo Gómez
Antonio Bermejo Gómez has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Belén Martín-Matute
Department of Organic Chemistry Stockholm University 10691 Stockholm Sweden
16 shared publications - Ana Eva Platero Prats
Departamento de Química Inorgánica, Facultad de Ciencias, Universidad Autónoma de Madrid, Campus de Cantoblanco, 28049 Madrid, Spain
6 shared publications - Vlad Pascanu
Syngenta Crop Protection AG, Schauffauserstrasse 101, CH-4332 Stein, Switzerland
5 shared publications Ana Vázquez-Romero
Department of Organic Chemistry, Arrhenius Laboratory, Stockholm University, 10691 Stockholm, Sweden.
4 shared publications- Xiaodong Zou
Department of Chemistry, Stockholm University, Stockholm, Sweden
4 shared publications - Abel Ros
Instituto de Investigaciones Químicas (CSIC-US) and Centro de Innovación en Química Avanzada (ORFEO–CINQA), Seville, Spain
3 shared publications
Latest Publications
- Open Access
- 24 September 2024
- Published by Wiley in Advanced Healthcare Materials
- Vol. 13 (32) , e2401187
An Advanced Mechanically Active Osteoarthritis‐on‐Chip Model to Test Injectable Therapeutic Formulations: The SYN321 Case Study
Current treatments for osteoarthritis (OA) often fail to address the underlying pathophysiology and may have systemic side effects, particularly associated with long‐term use of non‐steroidal anti‐inflammatory drugs (NSAIDs). Thus, researchers are currently directing their efforts toward innovative polymer‐drug combinations, such as mixtures of hyaluronic acid viscoelastic hydrogels and NSAIDs like diclofenac, to ensure sustained release of the NSAID within the joint following intra‐articular injection. However, the progress of novel injectable therapies for OA is hindered by the absence of preclinical models that accurately represent the pathology of the disease. The uBeat® MultiCompress platform is here presented as a novel approach for studying anti‐OA injectable therapeutics on human mechanically‐damaged OA cartilage microtissues, in a physiologically relevant environment. This platform can accommodate injectable therapeutic formulations and is successfully tested with SYN321, a novel diclofenac‐sodium hyaluronate conjugate under development as a treatment for knee OA. Results indicate the platform's effectiveness in evaluating therapeutic potential, showing downregulation of inflammatory markers and reduction in matrix degradation in OA cartilage micro‐tissues treated with SYN321. The uBeat® MultiCompress platform thus represents a valuable tool for OA research, offering a bridge between traditional in vitro studies and potential clinical applications, with implications for future drug discovery.
- 24 September 2024
- Published by Wiley in Advanced Healthcare Materials
- Vol. 13 (32) , e2401187
Open AccessAn Advanced Mechanically Active Osteoarthritis‐on‐Chip Model to Test Injectable Therapeutic Formulations: The SYN321 Case Study
Current treatments for osteoarthritis (OA) often fail to address the underlying pathophysiology and may have systemic side effects, particularly associated with long‐term use of non‐steroidal anti‐inflammatory drugs (NSAIDs). Thus, researchers are currently directing their efforts toward innovative polymer‐drug combinations, such as mixtures of hyaluronic acid viscoelastic hydrogels and NSAIDs like diclofenac, to ensure sustained release of the NSAID within the joint following intra‐articular injection. However, the progress of novel injectable therapies for OA is hindered by the absence of preclinical models that accurately represent the pathology of the disease. The uBeat® MultiCompress platform is here presented as a novel approach for studying anti‐OA injectable therapeutics on human mechanically‐damaged OA cartilage microtissues, in a physiologically relevant environment. This platform can accommodate injectable therapeutic formulations and is successfully tested with SYN321, a novel diclofenac‐sodium hyaluronate conjugate under development as a treatment for knee OA. Results indicate the platform's effectiveness in evaluating therapeutic potential, showing downregulation of inflammatory markers and reduction in matrix degradation in OA cartilage micro‐tissues treated with SYN321. The uBeat® MultiCompress platform thus represents a valuable tool for OA research, offering a bridge between traditional in vitro studies and potential clinical applications, with implications for future drug discovery.
- 15 April 2019
- Published by Wiley in ChemCatChem
- Vol. 11 (16) , 3933-3940
Aerobic Homocoupling of Arylboronic Acids Catalyzed by Regenerable Pd(II)@MIL‐88B‐NH2(Cr)
A fast and operationally simple method for the aerobic homocoupling of arylboronic acids is described. The process is catalyzed by Pd(II) complexes supported on the metal‐organic framework MIL‐88B‐NH2(Cr). The benefits of this approach include the use of a benign oxidant/solvent mixture at room temperature with catalytic amounts of base, easy recovery of the catalyst, and easy isolation of the products. Very high conversions and good yields were achieved for a variety of substrates, and the process was also carried out on a larger scale with the same efficiency. The catalyst was found to suffer deactivation due to progressive reduction and agglomeration of palladium into inactive metal clusters/particles. An innovative procedure for the oxidative redispersion and regeneration of the active Pd(II)@MOF species is presented.
- 15 April 2019
- Published by Wiley in ChemCatChem
- Vol. 11 (16) , 3933-3940
Aerobic Homocoupling of Arylboronic Acids Catalyzed by Regenerable Pd(II)@MIL‐88B‐NH2(Cr)
A fast and operationally simple method for the aerobic homocoupling of arylboronic acids is described. The process is catalyzed by Pd(II) complexes supported on the metal‐organic framework MIL‐88B‐NH2(Cr). The benefits of this approach include the use of a benign oxidant/solvent mixture at room temperature with catalytic amounts of base, easy recovery of the catalyst, and easy isolation of the products. Very high conversions and good yields were achieved for a variety of substrates, and the process was also carried out on a larger scale with the same efficiency. The catalyst was found to suffer deactivation due to progressive reduction and agglomeration of palladium into inactive metal clusters/particles. An innovative procedure for the oxidative redispersion and regeneration of the active Pd(II)@MOF species is presented.
- Open Access
- 3 April 2018
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 54 (34) , 4286-4289
[18F]fluoro-benziodoxole: a no-carrier-added electrophilic fluorinating reagent. Rapid, simple radiosynthesis, purification and application for fluorine-18 labelling
An electrophilic 18F transfer reagent was synthetized by rapid, operationally simple ligand exchange from a hypervalent iodine and [18F]TBAF.
- 3 April 2018
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 54 (34) , 4286-4289
Open Access[18F]fluoro-benziodoxole: a no-carrier-added electrophilic fluorinating reagent. Rapid, simple radiosynthesis, purification and application for fluorine-18 labelling
An electrophilic 18F transfer reagent was synthetized by rapid, operationally simple ligand exchange from a hypervalent iodine and [18F]TBAF.
- Open Access
- 7 August 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (71) , 9842-9845
2,2-Diiododimedone: a mild electrophilic iodinating agent for the selective synthesis of α-iodoketones from allylic alcohols
In combination with an iridium catalyst, a new electrophilic iodinating agent enables the synthesis of α-iodocarbonyls from allylic alcohols.
- 7 August 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (71) , 9842-9845
Open Access2,2-Diiododimedone: a mild electrophilic iodinating agent for the selective synthesis of α-iodoketones from allylic alcohols
In combination with an iridium catalyst, a new electrophilic iodinating agent enables the synthesis of α-iodocarbonyls from allylic alcohols.
- 6 April 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (8) , 4576-4583
Topological Transformation of a Metal–Organic Framework Triggered by Ligand Exchange
Here we describe the topological transformation of the pores of a new framework in the bio-MOF-100 family (dia-c) into the known isomer (lcs) by doubling the pore volume, which occurs during postsynthesis modifications. During this transformation, reassembling of the metal–organic framework (MOF) building blocks into a completely different framework occurs, involving breaking/forming of metal–ligand bonds. MOF crystallinity and local structure are retained, as determined by powder X-ray diffraction (PXRD) and pair distribution function (PDF) analyses, respectively. We exploited the inherent dynamism of bio-MOF-100 by coupling chemical decorations of the framework using solvent-assisted ligand exchange to the topological change. Following this method and starting from the pristine dense dia-c phase, open lcs-bio-MOF-100 was prepared and functionalized in situ with an iridium complex (IrL). Alternatively, the dia-c MOF could be modified with wide-ranging amounts of IrL up to ca. 50 mol %, as determined by solution 1H NMR spectroscopy, by tuning the concentration of the solutions used and with no evidence for isomer transformation. The single-site nature of the iridium complexes within the MOFs was assessed by X-ray absorption spectroscopy (XAS) and PDF analyses. Ligand exchanges occurred quantitatively at room temperature, with no need of excess of the iridium metallolinker.
- 6 April 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (8) , 4576-4583
Topological Transformation of a Metal–Organic Framework Triggered by Ligand Exchange
Here we describe the topological transformation of the pores of a new framework in the bio-MOF-100 family (dia-c) into the known isomer (lcs) by doubling the pore volume, which occurs during postsynthesis modifications. During this transformation, reassembling of the metal–organic framework (MOF) building blocks into a completely different framework occurs, involving breaking/forming of metal–ligand bonds. MOF crystallinity and local structure are retained, as determined by powder X-ray diffraction (PXRD) and pair distribution function (PDF) analyses, respectively. We exploited the inherent dynamism of bio-MOF-100 by coupling chemical decorations of the framework using solvent-assisted ligand exchange to the topological change. Following this method and starting from the pristine dense dia-c phase, open lcs-bio-MOF-100 was prepared and functionalized in situ with an iridium complex (IrL). Alternatively, the dia-c MOF could be modified with wide-ranging amounts of IrL up to ca. 50 mol %, as determined by solution 1H NMR spectroscopy, by tuning the concentration of the solutions used and with no evidence for isomer transformation. The single-site nature of the iridium complexes within the MOFs was assessed by X-ray absorption spectroscopy (XAS) and PDF analyses. Ligand exchanges occurred quantitatively at room temperature, with no need of excess of the iridium metallolinker.
- 1 February 2017
- Published by Elsevier in Journal of Fluorine Chemistry
- Vol. 194, 51-57
Synthesis of trifluoromethyl moieties by late-stage copper (I) mediated nucleophilic fluorination
- 1 February 2017
- Published by Elsevier in Journal of Fluorine Chemistry
- Vol. 194, 51-57
Synthesis of trifluoromethyl moieties by late-stage copper (I) mediated nucleophilic fluorination
- Open Access
- 10 November 2016
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 52 (97) , 13963-13966
Efficient DBU accelerated synthesis of 18F-labelled trifluoroacetamides
Nucleophilic 18F-fluorination of bromodifluoroacetamides was performed in the presence of DBU. A mechanism where DBU acts as organomediator is proposed.
- 10 November 2016
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 52 (97) , 13963-13966
Open AccessEfficient DBU accelerated synthesis of 18F-labelled trifluoroacetamides
Nucleophilic 18F-fluorination of bromodifluoroacetamides was performed in the presence of DBU. A mechanism where DBU acts as organomediator is proposed.
- Open Access
- 30 September 2016
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 138 (40) , 13408-13414
Base-Catalyzed Stereospecific Isomerization of Electron-Deficient Allylic Alcohols and Ethers through Ion-Pairing
A mild base-catalyzed strategy for the isomerization of allylic alcohols and allylic ethers has been developed. Experimental and computational investigations indicate that transition metal catalysts are not required when basic additives are present. As in the case of using transition metals under basic conditions, the isomerization catalyzed solely by base also follows a stereospecific pathway. The reaction is initiated by a rate-limiting deprotonation. Formation of an intimate ion pair between an allylic anion and the conjugate acid of the base results in efficient transfer of chirality. Through this mechanism, stereochemical information contained in the allylic alcohols is transferred to the ketone products. The stereospecific isomerization is also applicable for the first time to allylic ethers, yielding synthetically valuable enantioenriched (up to 97% ee) enol ethers.
- 30 September 2016
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 138 (40) , 13408-13414
Open AccessBase-Catalyzed Stereospecific Isomerization of Electron-Deficient Allylic Alcohols and Ethers through Ion-Pairing
A mild base-catalyzed strategy for the isomerization of allylic alcohols and allylic ethers has been developed. Experimental and computational investigations indicate that transition metal catalysts are not required when basic additives are present. As in the case of using transition metals under basic conditions, the isomerization catalyzed solely by base also follows a stereospecific pathway. The reaction is initiated by a rate-limiting deprotonation. Formation of an intimate ion pair between an allylic anion and the conjugate acid of the base results in efficient transfer of chirality. Through this mechanism, stereochemical information contained in the allylic alcohols is transferred to the ketone products. The stereospecific isomerization is also applicable for the first time to allylic ethers, yielding synthetically valuable enantioenriched (up to 97% ee) enol ethers.
- 21 September 2016
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (44) , 15659-15663
General, Simple, and Chemoselective Catalysts for the Isomerization of Allylic Alcohols: The Importance of the Halide Ligand
Remarkably simple IrIII catalysts enable the isomerization of primary and sec‐allylic alcohols under very mild reaction conditions. X‐ray absorption spectroscopy (XAS) and mass spectrometry (MS) studies indicate that the catalysts, with the general formula [Cp*IrIII], require a halide ligand for catalytic activity, but no additives or additional ligands are needed.
- 21 September 2016
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (44) , 15659-15663
General, Simple, and Chemoselective Catalysts for the Isomerization of Allylic Alcohols: The Importance of the Halide Ligand
Remarkably simple IrIII catalysts enable the isomerization of primary and sec‐allylic alcohols under very mild reaction conditions. X‐ray absorption spectroscopy (XAS) and mass spectrometry (MS) studies indicate that the catalysts, with the general formula [Cp*IrIII], require a halide ligand for catalytic activity, but no additives or additional ligands are needed.
- 25 April 2016
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (21) , 7184-7189
Mild and Selective Catalytic Hydrogenation of the C=C Bond in α,β‐Unsaturated Carbonyl Compounds Using Supported Palladium Nanoparticles
Chemoselective reduction of the C=C bond in a variety of α,β‐unsaturated carbonyl compounds using supported palladium nanoparticles is reported. Three different heterogeneous catalysts were compared using 1 atm of H2: 1) nano‐Pd on a metal–organic framework (MOF: Pd0‐MIL‐101‐NH2(Cr)), 2) nano‐Pd on a siliceous mesocellular foam (MCF: Pd0‐AmP‐MCF), and 3) commercially available palladium on carbon (Pd/C). Initial studies showed that the Pd@MOF and Pd@MCF nanocatalysts were superior in activity and selectivity compared to commercial Pd/C. Both Pd0‐MIL‐101‐NH2(Cr) and Pd0‐AmP‐MCF were capable of delivering the desired products in very short reaction times (10–90 min) with low loadings of Pd (0.5–1 mol %). Additionally, the two catalytic systems exhibited high recyclability and very low levels of metal leaching.
- 25 April 2016
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (21) , 7184-7189
Mild and Selective Catalytic Hydrogenation of the C=C Bond in α,β‐Unsaturated Carbonyl Compounds Using Supported Palladium Nanoparticles
Chemoselective reduction of the C=C bond in a variety of α,β‐unsaturated carbonyl compounds using supported palladium nanoparticles is reported. Three different heterogeneous catalysts were compared using 1 atm of H2: 1) nano‐Pd on a metal–organic framework (MOF: Pd0‐MIL‐101‐NH2(Cr)), 2) nano‐Pd on a siliceous mesocellular foam (MCF: Pd0‐AmP‐MCF), and 3) commercially available palladium on carbon (Pd/C). Initial studies showed that the Pd@MOF and Pd@MCF nanocatalysts were superior in activity and selectivity compared to commercial Pd/C. Both Pd0‐MIL‐101‐NH2(Cr) and Pd0‐AmP‐MCF were capable of delivering the desired products in very short reaction times (10–90 min) with low loadings of Pd (0.5–1 mol %). Additionally, the two catalytic systems exhibited high recyclability and very low levels of metal leaching.