Amin Khavasi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Amin Khavasi has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Reza Tavakol
Department of Electrical Engineering, Sharif University of Technology, Tehran, Iran
9 shared publications Behzad Rejaei
Department of Electrical Engineering, Sharif University of Technology, P.O. Box 11555-4363, Tehran, Iran
5 shared publications- Behzad Rejaei
Sharif University of Technology
5 shared publications Kamalodin Arik
Department of Electrical Engineering, Sharif University of Technology, P.O. Box 11555-4363, Tehran, Iran
5 shared publications- Sajjad Abdollahramezani
Georgia Institute of Technology (United States)
4 shared publications Amirhossein Saba
Department of Electrical Engineering, Sharif University of Technology, P.O. Box 11555-4363, Tehran, Iran
3 shared publications
Latest Publications
- 15 November 2023
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 53 (1) , 525-534
Design and Fabrication of a Polarization-Independent Millimeter-Wave Absorber Using Circuit Theory and 3D Printing
- 15 November 2023
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 53 (1) , 525-534
Design and Fabrication of a Polarization-Independent Millimeter-Wave Absorber Using Circuit Theory and 3D Printing
- Open Access
An extended equivalent circuit model for analysis of arrays of sub-wavelength holes perforated in a metallic film
Periodic arrays of sub-wavelength holes, due to a variety of applications (sensors, polarizers, filters) and unique abilities in manipulating different characteristics of impinging light, have been the subject of many studies in recent years. This paper presents a new high-precision circuit model to investigate these structures' electromagnetic response, which provides higher accuracy than available literature. To develop the model, a multi-mode approach is taken for inside the apertures, and the proposed model is presented in three general forms which are explained in detail. Along with the proposed circuit model, accurate spatial profiles for square and circular apertures are presented in which the transverse components of the electric field are approximated. In this paper, it is shown that structures such as an array of PEC pillars can be analyzed similar to other arrays of apertures, and the circuit model accurately predicts the behavior of these structures. In some practical applications, such as sensors and TCEs (transparent conducting electrodes), the array is embedded in a layered medium, and the circuit model with minor changes and few modifications can analyze these structures with high accuracy.
Open AccessAn extended equivalent circuit model for analysis of arrays of sub-wavelength holes perforated in a metallic film
Periodic arrays of sub-wavelength holes, due to a variety of applications (sensors, polarizers, filters) and unique abilities in manipulating different characteristics of impinging light, have been the subject of many studies in recent years. This paper presents a new high-precision circuit model to investigate these structures' electromagnetic response, which provides higher accuracy than available literature. To develop the model, a multi-mode approach is taken for inside the apertures, and the proposed model is presented in three general forms which are explained in detail. Along with the proposed circuit model, accurate spatial profiles for square and circular apertures are presented in which the transverse components of the electric field are approximated. In this paper, it is shown that structures such as an array of PEC pillars can be analyzed similar to other arrays of apertures, and the circuit model accurately predicts the behavior of these structures. In some practical applications, such as sensors and TCEs (transparent conducting electrodes), the array is embedded in a layered medium, and the circuit model with minor changes and few modifications can analyze these structures with high accuracy.
- Open Access
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 61728-61737
Integrated Photonic Convolutional Neural Network Based on Silicon Metalines
Compact and low-power CMOS-compatible hardware can be used for on-chip optical neural networks (ONNs), enabling affordable and portable image classification solutions for applications like autonomous vehicles, healthcare, and optical communication. In this work, we propose a novel one-dimensional Optical Convolutional Neural Network (OCNN) architecture that significantly reduces the number of learnable parameters required for an ONN. Our OCNN achieves an impressive accuracy of over 96% as a pattern classifier, utilizing only 90 learnable parameters, leading to a simpler structure compared to existing on-chip ONNs. Additionally, our OCNN demonstrates scalability and robustness, with an accuracy exceeding 89% in handwritten digit classification. The OCNN’s convolutional layer employs a lenslet 4f system for convolving desired kernels on input images, while an on-chip lens facilitates the desired Fourier Transform effortlessly. The subsequent layer consists of a single metaline layer, implementing a fully connected layer. By parallelizing pre-trained OCNNs, an on-chip deep convolutional neural network (CNN) can be realized, where each OCNN functions as a separate kernel within a conventional CNN.
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 61728-61737
Open AccessIntegrated Photonic Convolutional Neural Network Based on Silicon Metalines
Compact and low-power CMOS-compatible hardware can be used for on-chip optical neural networks (ONNs), enabling affordable and portable image classification solutions for applications like autonomous vehicles, healthcare, and optical communication. In this work, we propose a novel one-dimensional Optical Convolutional Neural Network (OCNN) architecture that significantly reduces the number of learnable parameters required for an ONN. Our OCNN achieves an impressive accuracy of over 96% as a pattern classifier, utilizing only 90 learnable parameters, leading to a simpler structure compared to existing on-chip ONNs. Additionally, our OCNN demonstrates scalability and robustness, with an accuracy exceeding 89% in handwritten digit classification. The OCNN’s convolutional layer employs a lenslet 4f system for convolving desired kernels on input images, while an on-chip lens facilitates the desired Fourier Transform effortlessly. The subsequent layer consists of a single metaline layer, implementing a fully connected layer. By parallelizing pre-trained OCNNs, an on-chip deep convolutional neural network (CNN) can be realized, where each OCNN functions as a separate kernel within a conventional CNN.
- 13 June 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (13) , 21626-21640
Babinet-complementary structures for implementation of pseudospin-polarized waveguides
In this work, a theorem is proved stating that in various types of waveguides with mirror reflection symmetries, the electromagnetic duality correspondence between eigenmodes of complementary structures induces counterpropagating spin-polarized states. The mirror reflection symmetries may be preserved around one or more arbitrary planes. Pseudospin-polarized waveguides supporting one-way states manifest robustness. This is similar to topologically non-trivial direction-dependent states guided by photonic topological insulators. Nevertheless, a remarkable aspect of our structures is that they can be implemented in extremely broad bandwidth by simply using complementary structures. Based on our theory, the concept of the pseudospin polarized waveguide can be realized using dual impedance surfaces ranging from microwave to optical regime. Consequently, there is no need to employ bulk electromagnetic materials to suppress backscattering in waveguiding structures. This also includes pseudospinpolarized waveguides with perfect electric conductor-perfect magnetic conductor boundaries where the boundary conditions limit the bandwidth of waveguides. We design and develop various unidirectional systems and the spin-filtered feature in the microwave regime is further investigated.
- 13 June 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (13) , 21626-21640
Babinet-complementary structures for implementation of pseudospin-polarized waveguides
In this work, a theorem is proved stating that in various types of waveguides with mirror reflection symmetries, the electromagnetic duality correspondence between eigenmodes of complementary structures induces counterpropagating spin-polarized states. The mirror reflection symmetries may be preserved around one or more arbitrary planes. Pseudospin-polarized waveguides supporting one-way states manifest robustness. This is similar to topologically non-trivial direction-dependent states guided by photonic topological insulators. Nevertheless, a remarkable aspect of our structures is that they can be implemented in extremely broad bandwidth by simply using complementary structures. Based on our theory, the concept of the pseudospin polarized waveguide can be realized using dual impedance surfaces ranging from microwave to optical regime. Consequently, there is no need to employ bulk electromagnetic materials to suppress backscattering in waveguiding structures. This also includes pseudospinpolarized waveguides with perfect electric conductor-perfect magnetic conductor boundaries where the boundary conditions limit the bandwidth of waveguides. We design and develop various unidirectional systems and the spin-filtered feature in the microwave regime is further investigated.
- 11 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (3) , 2507-2514
Effective Constitutive Parameters Extraction of Bianisotropic Metamaterials Using Bloch Modes
In this paper, a method is proposed to extract the effective constitutive parameters of bianisotropic metamaterials using Bloch modes. We consider three-dimensional structures that are realized by stacking identical unit layers, where each unit layer is a two-dimensional periodic array of metallic or dielectric elements of arbitrary shape embedded in a background dielectric medium. Bianisotropic metamaterials do not satisfy the condition of reflection symmetry of unit layers considered in the previous researches. The eigenvectors and eigenvalues of the generalized transfer matrix of a unit layer are related to the Bloch modes of the structure. When only two dominant Bloch modes exist, closed form expressions are found for effective permittivity, permeability, and coupling magnetoelectric tensors of the medium. The effects of non-dominant Bloch modes are taken into account as interface surface impedance matrices. The calculated scattering parameters of a slab of bianisotropic metamaterial are shown to be in good agreement with results obtained from full-wave electromagnetic simulations using commercial solvers.
- 11 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (3) , 2507-2514
Effective Constitutive Parameters Extraction of Bianisotropic Metamaterials Using Bloch Modes
In this paper, a method is proposed to extract the effective constitutive parameters of bianisotropic metamaterials using Bloch modes. We consider three-dimensional structures that are realized by stacking identical unit layers, where each unit layer is a two-dimensional periodic array of metallic or dielectric elements of arbitrary shape embedded in a background dielectric medium. Bianisotropic metamaterials do not satisfy the condition of reflection symmetry of unit layers considered in the previous researches. The eigenvectors and eigenvalues of the generalized transfer matrix of a unit layer are related to the Bloch modes of the structure. When only two dominant Bloch modes exist, closed form expressions are found for effective permittivity, permeability, and coupling magnetoelectric tensors of the medium. The effects of non-dominant Bloch modes are taken into account as interface surface impedance matrices. The calculated scattering parameters of a slab of bianisotropic metamaterial are shown to be in good agreement with results obtained from full-wave electromagnetic simulations using commercial solvers.
- 1 December 2021
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 539, 168368
A dual-band circularly polarized antenna using a metallized ferrite disk
- 1 December 2021
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 539, 168368
A dual-band circularly polarized antenna using a metallized ferrite disk
- Open Access
- 26 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (6) , 1-10
Dynamical Control of Multilayer Spacetime Structures Using Extended Fourier Modal Method
We introduce two-dimensional space plus time (2D+1) structure and numerically investigate it using a developed multilayer simulation framework, for the first time. The new structure is consisting of crossed grating with time-varying permittivity which is inspired from 1D+1. In this regard, we extend Fourier Modal Method (FMM) in a general approach for spacetime multilayer states. Our proposed framework is fast, robust, and powerful compared to various finite difference methods. We use the scattering matrix technique to develop the proposed spacetime simulation method for multilayer structures using a non-uniform stack of layers. The method is perfectly suitable to investigate the spatiotemporal effects of surfaces/metasurfaces which covers both the transverse electric and magnetic (TE & TM) polarizations. The results show more freedom to control the optical outcomes of the multilayer considering two spatial periodicities in addition to the modulation frequency to reach nonreciprocity as one of the main consequences of the proposed structure. Moreover, we investigate the condition and limitation of breaking the Lorentz rule for spacetime structures. 2D+1 structure is more controllable than the 1D+1 due to its greater ability to adjust spatial manipulation in addition to temporal variations to reach nonreciprocity applications, digital coding, beam steering, etc.
- 26 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (6) , 1-10
Open AccessDynamical Control of Multilayer Spacetime Structures Using Extended Fourier Modal Method
We introduce two-dimensional space plus time (2D+1) structure and numerically investigate it using a developed multilayer simulation framework, for the first time. The new structure is consisting of crossed grating with time-varying permittivity which is inspired from 1D+1. In this regard, we extend Fourier Modal Method (FMM) in a general approach for spacetime multilayer states. Our proposed framework is fast, robust, and powerful compared to various finite difference methods. We use the scattering matrix technique to develop the proposed spacetime simulation method for multilayer structures using a non-uniform stack of layers. The method is perfectly suitable to investigate the spatiotemporal effects of surfaces/metasurfaces which covers both the transverse electric and magnetic (TE & TM) polarizations. The results show more freedom to control the optical outcomes of the multilayer considering two spatial periodicities in addition to the modulation frequency to reach nonreciprocity as one of the main consequences of the proposed structure. Moreover, we investigate the condition and limitation of breaking the Lorentz rule for spacetime structures. 2D+1 structure is more controllable than the 1D+1 due to its greater ability to adjust spatial manipulation in addition to temporal variations to reach nonreciprocity applications, digital coding, beam steering, etc.
- 1 September 2021
- Published by Elsevier in Optics Communications
- Vol. 495, 127084
Analog optical edge detection by spatial high-pass filtering using lithography-free structures
- 1 September 2021
- Published by Elsevier in Optics Communications
- Vol. 495, 127084
Analog optical edge detection by spatial high-pass filtering using lithography-free structures
- Open Access
- 13 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 73453-73466
Inverse Design of On-Chip Thermally Tunable Varifocal Metalens Based on Silicon Metalines
High-contrast transmitarray (HCTA) metasurfaces, named as metalines in this article, a category of lithographically defined on-chip diffractive elements with minimized scattering loss, enables parallel on-chip optical signal processing. While high-performance devices with different functionalities are reported, most of them are static, and their optical functions are fixed after fabrication. However, dynamically tunable metasurfaces are of essential need in many modern optical systems. Here, we employ an inverse design method, combining FDTD parameter sweep with Fourier-optics simulations, to design thermally-controlled varifocal metalenses. Thermal tunability is accomplished through the thermo-optical effect of silicon. Maximum focal length tunability of 12% and 24% are demonstrated for 400 μm and 200 μm aperture varifocal metalens doublets at the wavelength of 1.55 μm, respectively. The focusing efficiency is more than 74% for the whole temperature range. The 400 μm and 200 μm aperture metalenses are able to concentrate the input beam to spot sizes less than one wavelength and two wavelengths, respectively. This paves the way for dynamically controlled silicon photonics computational chips.
- 13 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 73453-73466
Open AccessInverse Design of On-Chip Thermally Tunable Varifocal Metalens Based on Silicon Metalines
High-contrast transmitarray (HCTA) metasurfaces, named as metalines in this article, a category of lithographically defined on-chip diffractive elements with minimized scattering loss, enables parallel on-chip optical signal processing. While high-performance devices with different functionalities are reported, most of them are static, and their optical functions are fixed after fabrication. However, dynamically tunable metasurfaces are of essential need in many modern optical systems. Here, we employ an inverse design method, combining FDTD parameter sweep with Fourier-optics simulations, to design thermally-controlled varifocal metalenses. Thermal tunability is accomplished through the thermo-optical effect of silicon. Maximum focal length tunability of 12% and 24% are demonstrated for 400 μm and 200 μm aperture varifocal metalens doublets at the wavelength of 1.55 μm, respectively. The focusing efficiency is more than 74% for the whole temperature range. The 400 μm and 200 μm aperture metalenses are able to concentrate the input beam to spot sizes less than one wavelength and two wavelengths, respectively. This paves the way for dynamically controlled silicon photonics computational chips.
- 25 February 2021
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 38 (3) , 953-960
Analytical method for the diffraction of an electromagnetic wave by subwavelength graphene ribbons
Theoretical study of arrays of graphene ribbons is currently of high interest due to its potential application in beam splitters, absorbers, and polarizers. In this paper, an analytical method is presented for diffraction analysis of graphene ribbon arrays. Previous analytical studies were carried out in the regime where the lateral separation between the ribbons is much smaller than the wavelength of the incident wave. As such, they cannot be used to calculate the reflection coefficients of higher diffracted orders. In contrast, the method proposed here can predict the electromagnetic response of graphene ribbon arrays even when the array constant is larger than the wavelength. To reach our results, we first derive an analytical expression for the surface density of the electric current induced on the ribbons by an incident, transverse-magnetic, plane wave. Next, closed-form and analytical expressions are obtained for the reflection coefficients of the zeroth and higher diffracted orders. The results are in excellent agreement with those obtained from full-wave simulations. The method presented facilitates the design of tunable gratings with many potential applications in the terahertz regime and optics.
- 25 February 2021
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 38 (3) , 953-960
Analytical method for the diffraction of an electromagnetic wave by subwavelength graphene ribbons
Theoretical study of arrays of graphene ribbons is currently of high interest due to its potential application in beam splitters, absorbers, and polarizers. In this paper, an analytical method is presented for diffraction analysis of graphene ribbon arrays. Previous analytical studies were carried out in the regime where the lateral separation between the ribbons is much smaller than the wavelength of the incident wave. As such, they cannot be used to calculate the reflection coefficients of higher diffracted orders. In contrast, the method proposed here can predict the electromagnetic response of graphene ribbon arrays even when the array constant is larger than the wavelength. To reach our results, we first derive an analytical expression for the surface density of the electric current induced on the ribbons by an incident, transverse-magnetic, plane wave. Next, closed-form and analytical expressions are obtained for the reflection coefficients of the zeroth and higher diffracted orders. The results are in excellent agreement with those obtained from full-wave simulations. The method presented facilitates the design of tunable gratings with many potential applications in the terahertz regime and optics.