Lauren N. Pincus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lauren N. Pincus has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Julie Beth Zimmerman
Yale University
5 shared publications - Catherine A. Peters
Princeton University
3 shared publications Eli Stavitski
National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, New York 11973, United States
2 shared publicationsF.J. Huertas
Instituto Andaluz de Ciencias de la Tierra, Granada, Spain
2 shared publications- Ajith Pattammattel
Brookhaven National Laboratory
1 shared publication Amanda W. Lounsbury
Nanosystems Engineering Research Center for Nanotechnology-Enabled Water Treatment (NEWT) , Yale University , New Haven , Connecticut 06511 , United States
1 shared publication
Latest Publications
- Open Access
- 16 April 2026
- Published by American Chemical Society (ACS) in ACS Earth and Space Chemistry
- Vol. 10 (5) , 1174-1184
Manganese and Cobalt in Olivine-Group Silicates Offer Potential for Natural H 2 Generation
- 16 April 2026
- Published by American Chemical Society (ACS) in ACS Earth and Space Chemistry
- Vol. 10 (5) , 1174-1184
Open AccessManganese and Cobalt in Olivine-Group Silicates Offer Potential for Natural H 2 Generation
- Open Access
- 3 April 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (14) , 7366-7376
Carbon Mineralization of Sulfate Wastes Containing Pb: Synchrotron Pb M3-Edge XANES Analysis of Simultaneous Heavy Metal and Carbon Sequestration
Sulfate wastes are produced in large quantities and contain toxic heavy metals such as lead (Pb), posing environmental risks. Because of favorable solubility differences, these wastes can be repurposed for engineered carbon dioxide (CO2) sequestration. Understanding the fate and mobility of heavy metals during this process is important. This study focuses on Pb and the effect of zinc (Zn) on Pb in carbon mineralization. Synthesized gypsum was treated with a carbonate-rich solution at pH 11.5 to convert the sulfates to carbonates. Aqueous solutions and mineral solids were analyzed. Synchrotron-based micro-X-ray fluorescence and a novel application of Pb M3-edge X-ray absorption near-edge structure provided detailed insights into Pb distribution and mineral forms. Results showed significant reductions in aqueous Pb and Zn concentrations, indicating effective metal sequestration. Carbon mineralization transformed Pb from soluble anglesite (PbSO4) into insoluble cerussite (PbCO3) and hydrocerussite (Pb3(CO3)2(OH)2). Pb primarily precipitated onto calcium carbonate surfaces through surface-mediated precipitation reactions. While the presence of Zn modified crystallization dynamics, it did not impede Pb sequestration and potentially enhanced surface reactivity, facilitating greater Pb immobilization. These findings highlight carbon mineralization as a sustainable approach to immobilize toxic metals in sulfate wastes while advancing CO2 sequestration efforts.
- 3 April 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (14) , 7366-7376
Open AccessCarbon Mineralization of Sulfate Wastes Containing Pb: Synchrotron Pb M3-Edge XANES Analysis of Simultaneous Heavy Metal and Carbon Sequestration
Sulfate wastes are produced in large quantities and contain toxic heavy metals such as lead (Pb), posing environmental risks. Because of favorable solubility differences, these wastes can be repurposed for engineered carbon dioxide (CO2) sequestration. Understanding the fate and mobility of heavy metals during this process is important. This study focuses on Pb and the effect of zinc (Zn) on Pb in carbon mineralization. Synthesized gypsum was treated with a carbonate-rich solution at pH 11.5 to convert the sulfates to carbonates. Aqueous solutions and mineral solids were analyzed. Synchrotron-based micro-X-ray fluorescence and a novel application of Pb M3-edge X-ray absorption near-edge structure provided detailed insights into Pb distribution and mineral forms. Results showed significant reductions in aqueous Pb and Zn concentrations, indicating effective metal sequestration. Carbon mineralization transformed Pb from soluble anglesite (PbSO4) into insoluble cerussite (PbCO3) and hydrocerussite (Pb3(CO3)2(OH)2). Pb primarily precipitated onto calcium carbonate surfaces through surface-mediated precipitation reactions. While the presence of Zn modified crystallization dynamics, it did not impede Pb sequestration and potentially enhanced surface reactivity, facilitating greater Pb immobilization. These findings highlight carbon mineralization as a sustainable approach to immobilize toxic metals in sulfate wastes while advancing CO2 sequestration efforts.
- Open Access
- 1 November 2024
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 41 (11) , 425-435
Microplastics: From Intrinsic Properties to Environmental Fate
The prevalence of microplastics (MPs) in the environment is an escalating global concern, driven by their increasing abundance and potential adverse effects. Their detrimental environmental consequences and risks to public health necessitate urgent action to mitigate their impacts. To better understand MP accumulation within the environment, estimate their impacts, and develop effective mitigation strategies, it is imperative to advance our knowledge of MPs’ environmental fate and how this fate is linked with plastics’ intrinsic properties. We highlight the current research on MPs’ accumulation within different environmental sinks and identify the critical knowledge gaps in understanding the flux of MPs between these sinks. We also discuss how the intrinsic properties of MPs, including polymeric backbone, structure, chemical additives, crystallinity, molecular weight, and hydrophilicity, influence their environmental behavior and degradation pathways. Among these properties, the polymeric backbone and functional groups serve as primary drivers of MP stability when exposed to external physical and chemical factors, thereby influencing the pathway and rate of MP degradation. Other intrinsic properties and environmental conditions mostly impact the rate of MP degradation. As MPs undergo environmental degradation, changes in their intrinsic characteristics can lead to further fragmentation. This process potentially enhances environmental harm due to the resulting particles’ increased surface area, greater environmental mobility, and higher potential for contaminant transport. These factors collectively contribute to the complex dynamics of MPs’ fate and impact on the environment.
- 1 November 2024
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 41 (11) , 425-435
Open AccessMicroplastics: From Intrinsic Properties to Environmental Fate
The prevalence of microplastics (MPs) in the environment is an escalating global concern, driven by their increasing abundance and potential adverse effects. Their detrimental environmental consequences and risks to public health necessitate urgent action to mitigate their impacts. To better understand MP accumulation within the environment, estimate their impacts, and develop effective mitigation strategies, it is imperative to advance our knowledge of MPs’ environmental fate and how this fate is linked with plastics’ intrinsic properties. We highlight the current research on MPs’ accumulation within different environmental sinks and identify the critical knowledge gaps in understanding the flux of MPs between these sinks. We also discuss how the intrinsic properties of MPs, including polymeric backbone, structure, chemical additives, crystallinity, molecular weight, and hydrophilicity, influence their environmental behavior and degradation pathways. Among these properties, the polymeric backbone and functional groups serve as primary drivers of MP stability when exposed to external physical and chemical factors, thereby influencing the pathway and rate of MP degradation. Other intrinsic properties and environmental conditions mostly impact the rate of MP degradation. As MPs undergo environmental degradation, changes in their intrinsic characteristics can lead to further fragmentation. This process potentially enhances environmental harm due to the resulting particles’ increased surface area, greater environmental mobility, and higher potential for contaminant transport. These factors collectively contribute to the complex dynamics of MPs’ fate and impact on the environment.
- 31 May 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology Letters
- Vol. 10 (6) , 538-542
Rapid Accumulation of Soil Inorganics on Plastics: Implications for Plastic Degradation and Contaminant Fate
- 31 May 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology Letters
- Vol. 10 (6) , 538-542
Rapid Accumulation of Soil Inorganics on Plastics: Implications for Plastic Degradation and Contaminant Fate
- 13 July 2020
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
- Vol. 6 (10) , 2713-2722
Aerobic oxidation of arsenite to arsenate by Cu(ii)–chitosan/O2in Fenton-like reaction, a XANES investigation
Oxidation of inorganic molecules (e.g., arsenite (As(III)) to arsenate (As(V))) by Cu(II)–chitosan in the presence of dissolved oxygen is examined to elucidate the ability and mechanism of Cu(II)–chitosan and Cu(II)–n-TiO2–chitosan participation in Fenton-like reactions. To form the Cu(II)–chitosan complex, Cu(II) binds with the amine groups of the chitosan backbone resulting in a Cu(II)-complex with cationic behavior. Arsenic is then adsorbed to the copper binding site through a combination of Lewis acid–base coordinate bonding and electrostatics. As K-edge XANES indicate that arsenite is fully oxidized to arsenate when adsorbed to a Cu(II)–chitosan complex in the dark without introduction of a photo- or chemical-oxidant. The oxidation of arsenite by this complex is strongly controlled by the presence of dissolved oxygen as suggested by linear combination fitting where the % As(V) bound decreases from 100% ± 0.0% to 60.2 ± 0.1% upon removal of dissolved oxygen via the freeze pump thaw method. Cu K-edge XANES indicate that Cu(II) acts as a catalyst rather than a reactant, as it remains present as Cu(II) after As oxidation in each system condition examined. For Cu(II)–n-TiO2–chitosan, the amount of As(III) oxidized to As(V) is strongly controlled by the loading of Cu(II), with a higher loading of Cu(II) leading to more As(III) oxidized and bound on the surface of the adsorbent as As(V). As(III) removal by both Cu(II)–chitosan and Cu(II)–nTiO2–chitosan is significantly improved due to the Fenton-like oxidation of As(III) to As(V). For Cu(II)–n-TiO2–chitosan, higher loadings of Cu(II) relative to n-TiO2 lead to greater improvement of As(III) removal performance under oxic vs. anoxic conditions.
- 13 July 2020
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
- Vol. 6 (10) , 2713-2722
Aerobic oxidation of arsenite to arsenate by Cu(ii)–chitosan/O2in Fenton-like reaction, a XANES investigation
Oxidation of inorganic molecules (e.g., arsenite (As(III)) to arsenate (As(V))) by Cu(II)–chitosan in the presence of dissolved oxygen is examined to elucidate the ability and mechanism of Cu(II)–chitosan and Cu(II)–n-TiO2–chitosan participation in Fenton-like reactions. To form the Cu(II)–chitosan complex, Cu(II) binds with the amine groups of the chitosan backbone resulting in a Cu(II)-complex with cationic behavior. Arsenic is then adsorbed to the copper binding site through a combination of Lewis acid–base coordinate bonding and electrostatics. As K-edge XANES indicate that arsenite is fully oxidized to arsenate when adsorbed to a Cu(II)–chitosan complex in the dark without introduction of a photo- or chemical-oxidant. The oxidation of arsenite by this complex is strongly controlled by the presence of dissolved oxygen as suggested by linear combination fitting where the % As(V) bound decreases from 100% ± 0.0% to 60.2 ± 0.1% upon removal of dissolved oxygen via the freeze pump thaw method. Cu K-edge XANES indicate that Cu(II) acts as a catalyst rather than a reactant, as it remains present as Cu(II) after As oxidation in each system condition examined. For Cu(II)–n-TiO2–chitosan, the amount of As(III) oxidized to As(V) is strongly controlled by the loading of Cu(II), with a higher loading of Cu(II) leading to more As(III) oxidized and bound on the surface of the adsorbent as As(V). As(III) removal by both Cu(II)–chitosan and Cu(II)–nTiO2–chitosan is significantly improved due to the Fenton-like oxidation of As(III) to As(V). For Cu(II)–n-TiO2–chitosan, higher loadings of Cu(II) relative to n-TiO2 lead to greater improvement of As(III) removal performance under oxic vs. anoxic conditions.
- Top Cited Papers
- 9 June 2020
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 54 (16) , 9769-9790
Exploring the Mechanisms of Selectivity for Environmentally Significant Oxo-Anion Removal during Water Treatment: A Review of Common Competing Oxo-Anions and Tools for Quantifying Selective Adsorption
Development of novel adsorbents often neglects the competitive adsorption between co-occurring oxo-anions, over-estimating realistic pollutant removal potentials, and overlooking the need to improve selectivity of materials. This critical review focuses on adsorptive competition between commonly co-occurring oxo-anions in water and mechanistic approaches for the design and development of selective adsorbents. Six “target” oxo-anion pollutants (arsenate, arsenite, selenate, selenite, chromate, and perchlorate) were selected for study. Five “competing” co-occurring oxo-anions (phosphate, sulfate, bicarbonate, silicate, and nitrate) were selected due to their potential to compete with target oxo-anions for sorption sites resulting in decreased removal of the target oxo-anions. First, a comprehensive review of competition between target and competitor oxo-anions to sorb on commonly used, non-selective, metal hydr(oxide) materials is presented, and the strength of competition between each target and competitive oxo-anion pair is classified. This is followed by a critical discussion of the different equations and models used to quantify selectivity. Next, four mechanisms that have been successfully utilized in the development of selective adsorbents are reviewed: variation in surface complexation, Lewis acid/base hardness, steric hindrance, and electrostatic interactions. For each mechanism, the oxo-anions, both target and competitors, are ranked in terms of adsorptive attraction and technologies that exploit this mechanism are reviewed. Third, given the significant effort to evaluate these systems empirically, the potential to use computational quantum techniques, such as density functional theory (DFT), for modeling and prediction is explored. Finally, areas within the field of selective adsorption requiring further research are detailed with guidance on priorities for screening and defining selective adsorbents.
- 9 June 2020
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 54 (16) , 9769-9790
Top Cited PapersExploring the Mechanisms of Selectivity for Environmentally Significant Oxo-Anion Removal during Water Treatment: A Review of Common Competing Oxo-Anions and Tools for Quantifying Selective Adsorption
Development of novel adsorbents often neglects the competitive adsorption between co-occurring oxo-anions, over-estimating realistic pollutant removal potentials, and overlooking the need to improve selectivity of materials. This critical review focuses on adsorptive competition between commonly co-occurring oxo-anions in water and mechanistic approaches for the design and development of selective adsorbents. Six “target” oxo-anion pollutants (arsenate, arsenite, selenate, selenite, chromate, and perchlorate) were selected for study. Five “competing” co-occurring oxo-anions (phosphate, sulfate, bicarbonate, silicate, and nitrate) were selected due to their potential to compete with target oxo-anions for sorption sites resulting in decreased removal of the target oxo-anions. First, a comprehensive review of competition between target and competitor oxo-anions to sorb on commonly used, non-selective, metal hydr(oxide) materials is presented, and the strength of competition between each target and competitive oxo-anion pair is classified. This is followed by a critical discussion of the different equations and models used to quantify selectivity. Next, four mechanisms that have been successfully utilized in the development of selective adsorbents are reviewed: variation in surface complexation, Lewis acid/base hardness, steric hindrance, and electrostatic interactions. For each mechanism, the oxo-anions, both target and competitors, are ranked in terms of adsorptive attraction and technologies that exploit this mechanism are reviewed. Third, given the significant effort to evaluate these systems empirically, the potential to use computational quantum techniques, such as density functional theory (DFT), for modeling and prediction is explored. Finally, areas within the field of selective adsorption requiring further research are detailed with guidance on priorities for screening and defining selective adsorbents.
- 1 December 2019
- Published by Cambridge University Press (CUP) in Clays and Clay Minerals
- Vol. 67 (6) , 488-506
Arsenic-Bearing Serpentine-Group Minerals: Mineral Synthesis with Insights for the Arsenic Cycle
When present at elevated levels in drinking water, arsenic is toxic, and magnesian clays are gaining recognition as a source of elevated arsenic in groundwater. In the crust and upper mantle of Earth, arsenic incorporation into clay minerals is influenced by geochemical conditions associated with hydrothermal fluids and metamorphic processes (e.g. serpentinization), meaning that As is a useful tracer of fluid-flow in the deep Earth. To improve understanding of arsenic speciation in groundwater, sediments, soils, and hydrothermal-metamorphic systems, the present study examined arsenic incorporation into magnesian clays by synthesis of serpentine minerals (200oC, 10 d) with varied concentrations of Si, Al, As5+, and As3+. The synthesis experiments produced two distinct crystal types, tubular and platy serpentines, each with 10–15% randomly interstratified talc layers. X-ray absorption spectroscopy indicated that As5+ and As3+ occurred in the tetrahedral sheet. Single-crystal analysis revealed that tubular crystals contained up to 1 wt.% arsenic [Mg2.8(Si1.8As0.2)O5(OH)4] (mean 0.2 wt.% As). The mean composition of platy, high-Al crystals is (Mg1.8Al0.7)(Si2.0)O5(OH)4, and that of platy, medium-Al crystals with As3+ is (Mg2.07Al0.52) (Si1.97As3+0.03)O5(OH)4. Charge, geometry, and radius of tetrahedral AsO43– oxyanions are similar to tetrahedral SiO44–, and this facilitates fixation of As5+ into the tetrahedral sheet of clay minerals. The geometry and size of the larger As3+ in tetrahedral sites (as a pyramidal AsO33– oxyanion) may limit incorporation relative to As5+. Arsenic-bearing Mg clays crystallize in alkaline environments where AsO43– or AsO33– are the dominant As species and where high pH accompanies crystallization of serpentine, talc, chlorite, or Mg-smectite. The presence of tetrahedral As in these clays raises the possibility of tetrahedral As in other Mg clays (e.g. sepiolite or kerolite) as well.
- 1 December 2019
- Published by Cambridge University Press (CUP) in Clays and Clay Minerals
- Vol. 67 (6) , 488-506
Arsenic-Bearing Serpentine-Group Minerals: Mineral Synthesis with Insights for the Arsenic Cycle
When present at elevated levels in drinking water, arsenic is toxic, and magnesian clays are gaining recognition as a source of elevated arsenic in groundwater. In the crust and upper mantle of Earth, arsenic incorporation into clay minerals is influenced by geochemical conditions associated with hydrothermal fluids and metamorphic processes (e.g. serpentinization), meaning that As is a useful tracer of fluid-flow in the deep Earth. To improve understanding of arsenic speciation in groundwater, sediments, soils, and hydrothermal-metamorphic systems, the present study examined arsenic incorporation into magnesian clays by synthesis of serpentine minerals (200oC, 10 d) with varied concentrations of Si, Al, As5+, and As3+. The synthesis experiments produced two distinct crystal types, tubular and platy serpentines, each with 10–15% randomly interstratified talc layers. X-ray absorption spectroscopy indicated that As5+ and As3+ occurred in the tetrahedral sheet. Single-crystal analysis revealed that tubular crystals contained up to 1 wt.% arsenic [Mg2.8(Si1.8As0.2)O5(OH)4] (mean 0.2 wt.% As). The mean composition of platy, high-Al crystals is (Mg1.8Al0.7)(Si2.0)O5(OH)4, and that of platy, medium-Al crystals with As3+ is (Mg2.07Al0.52) (Si1.97As3+0.03)O5(OH)4. Charge, geometry, and radius of tetrahedral AsO43– oxyanions are similar to tetrahedral SiO44–, and this facilitates fixation of As5+ into the tetrahedral sheet of clay minerals. The geometry and size of the larger As3+ in tetrahedral sites (as a pyramidal AsO33– oxyanion) may limit incorporation relative to As5+. Arsenic-bearing Mg clays crystallize in alkaline environments where AsO43– or AsO33– are the dominant As species and where high pH accompanies crystallization of serpentine, talc, chlorite, or Mg-smectite. The presence of tetrahedral As in these clays raises the possibility of tetrahedral As in other Mg clays (e.g. sepiolite or kerolite) as well.
- 10 April 2019
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 52 (5) , 1206-1214
Toward Realizing Multifunctionality: Photoactive and Selective Adsorbents for the Removal of Inorganics in Water Treatment
Persistent and potentially toxic inorganic oxoanions (e.g., arsenic and selenium) are one class of contaminants of concern in drinking water for which treatment technologies must be improved. Effective removal of these oxoanions is made difficult by the varying adsorption affinity of the different oxidation states, as well as the presence of background ions with similar chemical structure and behavior that strongly compete for adsorption sites, greatly reducing removal efficiencies. Recent studies pointing to the negative health effects of inorganic oxoanion contaminants have resulted or are expected to result in new regulations lowering their allowable maximum concentration level (MCL) in drinking water. While these regulations are intended to protect human and environmental health, they must also allow for balanced economic costs. As such, the MCLs are often set at levels that are not as health protective due to high treatment costs that continue to present a significant challenge for small (500–3300 people) to very small (25–500 people) communities. In this Account, we focus on the development of novel cost-effective, sustainable, and efficient multifunctional and selective adsorbents that offer solutions to the above challenges through two platforms: nanoenabled and transition-metal cross-linked chitosan (TMCC) and crystal facet engineered nanometal oxides (NMO). These complementary platforms offer treatment solutions at different scales and flow rates (e.g., in a point-of-use device versus a small-scale community system). Multifunctional adsorbents combine processes that traditionally require multiple steps offering the potential for reducing treatment time and costs. Development of selective adsorbents can greatly increase removal efficiencies of target contaminants by either promoting their adsorption or hindering adsorption of competitive ions. The following sections describe (1) synthesis of novel nanoenabled waste sourced bioadsorbents; (2) development of multifunctional adsorbents to simultaneously photo-oxidize arsenite and adsorb arsenate; (3) development of a selective adsorbent for removal of arsenate and selenite over phosphate; (4) investigations of the conventional wisdom that increased surface area yields increased oxoanion removal using selenium sorption on nanohematite as a case study; and (5) crystal engineering of nanohematite to promote selenite adsorption. The novel technologies developed through these research efforts can serve as templates for the creation of future adsorbents tailored for use targeting other oxoanion contaminants of interest.
- 10 April 2019
- Published by American Chemical Society (ACS) in Accounts of Chemical Research
- Vol. 52 (5) , 1206-1214
Toward Realizing Multifunctionality: Photoactive and Selective Adsorbents for the Removal of Inorganics in Water Treatment
Persistent and potentially toxic inorganic oxoanions (e.g., arsenic and selenium) are one class of contaminants of concern in drinking water for which treatment technologies must be improved. Effective removal of these oxoanions is made difficult by the varying adsorption affinity of the different oxidation states, as well as the presence of background ions with similar chemical structure and behavior that strongly compete for adsorption sites, greatly reducing removal efficiencies. Recent studies pointing to the negative health effects of inorganic oxoanion contaminants have resulted or are expected to result in new regulations lowering their allowable maximum concentration level (MCL) in drinking water. While these regulations are intended to protect human and environmental health, they must also allow for balanced economic costs. As such, the MCLs are often set at levels that are not as health protective due to high treatment costs that continue to present a significant challenge for small (500–3300 people) to very small (25–500 people) communities. In this Account, we focus on the development of novel cost-effective, sustainable, and efficient multifunctional and selective adsorbents that offer solutions to the above challenges through two platforms: nanoenabled and transition-metal cross-linked chitosan (TMCC) and crystal facet engineered nanometal oxides (NMO). These complementary platforms offer treatment solutions at different scales and flow rates (e.g., in a point-of-use device versus a small-scale community system). Multifunctional adsorbents combine processes that traditionally require multiple steps offering the potential for reducing treatment time and costs. Development of selective adsorbents can greatly increase removal efficiencies of target contaminants by either promoting their adsorption or hindering adsorption of competitive ions. The following sections describe (1) synthesis of novel nanoenabled waste sourced bioadsorbents; (2) development of multifunctional adsorbents to simultaneously photo-oxidize arsenite and adsorb arsenate; (3) development of a selective adsorbent for removal of arsenate and selenite over phosphate; (4) investigations of the conventional wisdom that increased surface area yields increased oxoanion removal using selenium sorption on nanohematite as a case study; and (5) crystal engineering of nanohematite to promote selenite adsorption. The novel technologies developed through these research efforts can serve as templates for the creation of future adsorbents tailored for use targeting other oxoanion contaminants of interest.
- 1 September 2018
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 358, 145-154
Multifunctional photoactive and selective adsorbent for arsenite and arsenate: Evaluation of nano titanium dioxide-enabled chitosan cross-linked with copper
- 1 September 2018
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 358, 145-154
Multifunctional photoactive and selective adsorbent for arsenite and arsenate: Evaluation of nano titanium dioxide-enabled chitosan cross-linked with copper
- Top Cited Papers
- 3 April 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 20 (9) , 1929-1961
The Green ChemisTREE: 20 years after taking root with the 12 principles
A broad overview of the achievements and emerging areas in the field of Green Chemistry.
- 3 April 2018
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 20 (9) , 1929-1961
Top Cited PapersThe Green ChemisTREE: 20 years after taking root with the 12 principles
A broad overview of the achievements and emerging areas in the field of Green Chemistry.