Manfred Hermann Wagner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Manfred Hermann Wagner has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
- Esmaeil Narimissa
Department of Chemical Engineering, Technion–Israel Institute of Technology (IIT), Technion City, Haifa, Israel
20 shared publications - Valerian Hirschberg
Institute for Chemical Technology and Polymer Chemistry Karlsruhe Institute of Technology (KIT) Karlsruhe Germany
10 shared publications - Qian Huang
Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China
9 shared publications - Leslie Poh
Dept. of Chemical Engineering, Technion–Israel Institute of Technology (IIT), Haifa, Israel
8 shared publications Esmaeil Narimissa
Dept. of Chemical Engineering, Technion–Israel Institute of Technology (IIT), Haifa, Israel
6 shared publicationsManfred Wilhelm
Polymer Engineering/Polymer Physics, Berlin Institute of Technology (TU Berlin), Berlin, Germany
4 shared publications
Latest Publications
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Modeling brittle fracture in elongational flow of polymer melts with different chemical side groups
Fracture data in elongational flow of four polymer melts with different chemical side groups are analyzed by the enhanced relaxation of stretch model, which is extended here to include the effects of finite chain extensibility and the entropic fracture hypothesis. Two melts, poly(4-methyl styrene) and poly(4-vinyl biphenyl), contain aromatic side groups, which are more rigid than the alkyl side groups of the other two melts, poly (n-butyl methacrylate) and poly(methyl methacrylate). The elongational viscosity data were obtained by a filament stretching rheometer, and at high strain rates the stretched filaments fail by rupture before reaching the steady-state elongational viscosity. The analysis confirms that brittle fracture in elongational flow is related to the number of Kuhn segments per entanglement strand, rather than the number of entanglements per chain. For the two melts with aromatic side groups and a high number of Kuhn segments per entanglement strand, maximal chain extensibility has to be considered as a dynamic property depending on the equilibration time of the entanglement segment. The fracture data are in agreement with the assumption that fracture is caused by scission of primary C–C bonds of polymer chains when the strain energy reaches the bond-dissociation energy of the covalent bond. For poly(4-vinyl biphenyl) the π–π stacking of the phenyl groups stabilizes the polymer chain, and a much higher fracture energy is needed for bond-dissociation.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Modeling brittle fracture in elongational flow of polymer melts with different chemical side groups
Fracture data in elongational flow of four polymer melts with different chemical side groups are analyzed by the enhanced relaxation of stretch model, which is extended here to include the effects of finite chain extensibility and the entropic fracture hypothesis. Two melts, poly(4-methyl styrene) and poly(4-vinyl biphenyl), contain aromatic side groups, which are more rigid than the alkyl side groups of the other two melts, poly (n-butyl methacrylate) and poly(methyl methacrylate). The elongational viscosity data were obtained by a filament stretching rheometer, and at high strain rates the stretched filaments fail by rupture before reaching the steady-state elongational viscosity. The analysis confirms that brittle fracture in elongational flow is related to the number of Kuhn segments per entanglement strand, rather than the number of entanglements per chain. For the two melts with aromatic side groups and a high number of Kuhn segments per entanglement strand, maximal chain extensibility has to be considered as a dynamic property depending on the equilibration time of the entanglement segment. The fracture data are in agreement with the assumption that fracture is caused by scission of primary C–C bonds of polymer chains when the strain energy reaches the bond-dissociation energy of the covalent bond. For poly(4-vinyl biphenyl) the π–π stacking of the phenyl groups stabilizes the polymer chain, and a much higher fracture energy is needed for bond-dissociation.
- Open Access
- 10 February 2026
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 47 (9) , e00930
Self Dilution of Model Polystyrene Pom‐Poms and Combs by Unentangled Side Arms
We present linear‐viscoelastic characterization and elongational viscosity start‐up data of 4 model polystyrene pom‐poms and 2 model polystyrene combs. All 6 model systems have a self‐entangled backbone, but unentangled side arms. Pom‐poms consist of a linear backbone with one branching point with q arms at each end of the backbone. Analysis by the Enhanced Relaxation of Stretch (ERS) model shows that the elongational rheology of all model polymers is equivalent to that of polymer melts consisting of long linear chains diluted by short, unentangled linear polymer chains of the same chemistry. Strain hardening increases with increasing intrinsic dilution of the backbone by the arms. The comparison of the elongational viscosity data of pom‐poms versus that of the combs with several branching points along the backbone chain suggests that the location of the unentangled side arms does not result in significant differences. At higher elongation rates, brittle filament fracture is observed, which is well described by the fracture criterion for linear melts and polymer solutions, thus confirming the self‐dilution of the backbone chains of pom‐poms and combs by unentangled side arms.
- 10 February 2026
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 47 (9) , e00930
Open AccessSelf Dilution of Model Polystyrene Pom‐Poms and Combs by Unentangled Side Arms
We present linear‐viscoelastic characterization and elongational viscosity start‐up data of 4 model polystyrene pom‐poms and 2 model polystyrene combs. All 6 model systems have a self‐entangled backbone, but unentangled side arms. Pom‐poms consist of a linear backbone with one branching point with q arms at each end of the backbone. Analysis by the Enhanced Relaxation of Stretch (ERS) model shows that the elongational rheology of all model polymers is equivalent to that of polymer melts consisting of long linear chains diluted by short, unentangled linear polymer chains of the same chemistry. Strain hardening increases with increasing intrinsic dilution of the backbone by the arms. The comparison of the elongational viscosity data of pom‐poms versus that of the combs with several branching points along the backbone chain suggests that the location of the unentangled side arms does not result in significant differences. At higher elongation rates, brittle filament fracture is observed, which is well described by the fracture criterion for linear melts and polymer solutions, thus confirming the self‐dilution of the backbone chains of pom‐poms and combs by unentangled side arms.
- Open Access
- 4 August 2025
- Published by Springer Nature in Rheologica Acta
- Vol. 64 (8) , 355-368
A novel generalized strain hardening index (SHI) for long-chain branched polymer melts and its correlation to the steady-state compliance
Strain hardening of polymer melts in extensional flows is considered a desirable rheological feature because it stabilizes the homogeneity of free surface flows which is of importance, e.g., in film blowing, blow molding, and fiber spinning. Relating strain hardening to molecular characteristics, specifically topology in homopolymer melts, has been a long-standing challenge in rheology. While long-chain branching is known to be a decisive feature to enhance strain hardening, a general, quantitative relation between strain hardening and molecular topology is still missing. We propose a novel Strain Hardening Index (SHI) that can be used to assess the strain hardening behavior and to compare strain hardening of polymer melts with different topology and different chemistry, and we discuss its correlation with the steady-state compliance $$J_s^0$$ . We consider the strain hardening characteristics of model polystyrene comb and pom-pom systems as well as of model poly(( ±)-lactide) graft copolymers and several polydisperse low-density polyethylene melts. We show that the proposed SHI of typical low-density polyethylene melts is equivalent to that of polystyrene pom-poms and combs with specific topologies. This finding might pave the way to rheologically informed topological tailoring of the strain hardening of industrially important polymers such as, e.g., polyethylene. Graphical Abstract- 4 August 2025
- Published by Springer Nature in Rheologica Acta
- Vol. 64 (8) , 355-368
Open AccessA novel generalized strain hardening index (SHI) for long-chain branched polymer melts and its correlation to the steady-state compliance
Strain hardening of polymer melts in extensional flows is considered a desirable rheological feature because it stabilizes the homogeneity of free surface flows which is of importance, e.g., in film blowing, blow molding, and fiber spinning. Relating strain hardening to molecular characteristics, specifically topology in homopolymer melts, has been a long-standing challenge in rheology. While long-chain branching is known to be a decisive feature to enhance strain hardening, a general, quantitative relation between strain hardening and molecular topology is still missing. We propose a novel Strain Hardening Index (SHI) that can be used to assess the strain hardening behavior and to compare strain hardening of polymer melts with different topology and different chemistry, and we discuss its correlation with the steady-state compliance $$J_s^0$$ . We consider the strain hardening characteristics of model polystyrene comb and pom-pom systems as well as of model poly(( ±)-lactide) graft copolymers and several polydisperse low-density polyethylene melts. We show that the proposed SHI of typical low-density polyethylene melts is equivalent to that of polystyrene pom-poms and combs with specific topologies. This finding might pave the way to rheologically informed topological tailoring of the strain hardening of industrially important polymers such as, e.g., polyethylene. Graphical Abstract - Open Access
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
The linear-viscoelastic relaxation time spectrum tells it all for branched polymers: Modeling of nonlinear shear and elongational rheology of polystyrene pom-poms
We analyze the nonlinear shear and elongational rheology of six nearly monodisperse polystyrene pom-pom systems with different molecular weights of backbone and different numbers and molecular weights of side arms. Startup viscosity and apparent normal stress growth in shear flow as well as startup viscosity in elongational flow of pom-poms with strongly entangled side arms can be described consistently by the Hierarchical Multi-mode Molecular Stress Function (HMMSF) model. The modeling is based on the linear-viscoelastic characterization of the pom-poms in shear flow and accounts for dilution of the shorter relaxation modes by hierarchical relaxation of the longer modes. Dynamic dilution is characterized by a specific dilution modulus. For pom-poms with more than five entangled side arms, the dilution modulus is equal to the plateau modulus, and therefore the modeling of the nonlinear shear and elongational rheology of the pom-poms does not require any fitting parameter. We also show that pom-poms with weakly entangled or unentangled side arms can be considered as quasi-linear polymers with the slowly relaxing backbone chains being permanently diluted by the fast relaxing side arms. Pom-poms with entangled vs unentangled backbones show remarkably different features of steady shear and elongational viscosities resulting from different interplay of orientation and stretch of backbone chains.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Open AccessThe linear-viscoelastic relaxation time spectrum tells it all for branched polymers: Modeling of nonlinear shear and elongational rheology of polystyrene pom-poms
We analyze the nonlinear shear and elongational rheology of six nearly monodisperse polystyrene pom-pom systems with different molecular weights of backbone and different numbers and molecular weights of side arms. Startup viscosity and apparent normal stress growth in shear flow as well as startup viscosity in elongational flow of pom-poms with strongly entangled side arms can be described consistently by the Hierarchical Multi-mode Molecular Stress Function (HMMSF) model. The modeling is based on the linear-viscoelastic characterization of the pom-poms in shear flow and accounts for dilution of the shorter relaxation modes by hierarchical relaxation of the longer modes. Dynamic dilution is characterized by a specific dilution modulus. For pom-poms with more than five entangled side arms, the dilution modulus is equal to the plateau modulus, and therefore the modeling of the nonlinear shear and elongational rheology of the pom-poms does not require any fitting parameter. We also show that pom-poms with weakly entangled or unentangled side arms can be considered as quasi-linear polymers with the slowly relaxing backbone chains being permanently diluted by the fast relaxing side arms. Pom-poms with entangled vs unentangled backbones show remarkably different features of steady shear and elongational viscosities resulting from different interplay of orientation and stretch of backbone chains.
- Open Access
- 9 June 2025
- Published by Springer Nature in Rheologica Acta
- Vol. 64 (6-7) , 255-261
Consistent modeling of nonlinear shear and elongational start-up data of entangled polystyrene solutions
Nonlinear shear and elongational start-up data of three entangled PS solutions consisting of the same weight fraction of a linear long-chain polystyrene PS-600 k and three different styrene oligomeric solvents were recently reported by Cui et al. (Rheol Acta 64:97-105, 2025). The solvents are two linear styrene oligomers of different molecular weights as well as a star styrene oligomer. We show that start-up of shear viscosity and apparent normal stress difference as well as start-up of elongational viscosity can consistently be described by the Rotation Zero Stretch (RZS) model (Rheol Acta 63:573, 2024; Phys Fluids 36:093124, 2024), which is based on the tube model and a flow-strength sensitive evolution equation of stretch. In extensional flows, the RZS model reduces to the Enhanced Relaxation of Stretch (ERS) model (J Rheol. 65:1413, 2021). The modeling is based exclusively on the linear-viscoelastic characterization of the solutions and a consistent set of Rouse stretch relaxation times for PS-600 k. Graphical Abstract
- 9 June 2025
- Published by Springer Nature in Rheologica Acta
- Vol. 64 (6-7) , 255-261
Open AccessConsistent modeling of nonlinear shear and elongational start-up data of entangled polystyrene solutions
Nonlinear shear and elongational start-up data of three entangled PS solutions consisting of the same weight fraction of a linear long-chain polystyrene PS-600 k and three different styrene oligomeric solvents were recently reported by Cui et al. (Rheol Acta 64:97-105, 2025). The solvents are two linear styrene oligomers of different molecular weights as well as a star styrene oligomer. We show that start-up of shear viscosity and apparent normal stress difference as well as start-up of elongational viscosity can consistently be described by the Rotation Zero Stretch (RZS) model (Rheol Acta 63:573, 2024; Phys Fluids 36:093124, 2024), which is based on the tube model and a flow-strength sensitive evolution equation of stretch. In extensional flows, the RZS model reduces to the Enhanced Relaxation of Stretch (ERS) model (J Rheol. 65:1413, 2021). The modeling is based exclusively on the linear-viscoelastic characterization of the solutions and a consistent set of Rouse stretch relaxation times for PS-600 k. Graphical Abstract
- Open Access
- 30 May 2025
- Published by Stavanger University Library in Annual Transactions of the Nordic Rheology Society
- Vol. 33, 55-64
A Novel Strain Hardening Index SHI for Long-Chain Branched Polymer Melts
Strain hardening of polymer melts in extensional flows is considered as a desirable rheological feature because it stabilizes the homogeneity of free surface flows, such as e.g., film blowing, blow molding, and fiber spinning. Relating strain hardening to molecular characteristics has been a long-standing challenge in rheology, but while long-chain branching (LCB) is known to be a decisive feature to enhance strain hardening, a quantitative relation between strain hardening and molecular topology is still missing. We propose a novel strain hardening index SHI, that can be used to assess the strain hardening behaviour and to compare the strain hardening of polymer melts with different topologies and different chemistries investigated at different temperatures.
- 30 May 2025
- Published by Stavanger University Library in Annual Transactions of the Nordic Rheology Society
- Vol. 33, 55-64
Open AccessA Novel Strain Hardening Index SHI for Long-Chain Branched Polymer Melts
Strain hardening of polymer melts in extensional flows is considered as a desirable rheological feature because it stabilizes the homogeneity of free surface flows, such as e.g., film blowing, blow molding, and fiber spinning. Relating strain hardening to molecular characteristics has been a long-standing challenge in rheology, but while long-chain branching (LCB) is known to be a decisive feature to enhance strain hardening, a quantitative relation between strain hardening and molecular topology is still missing. We propose a novel strain hardening index SHI, that can be used to assess the strain hardening behaviour and to compare the strain hardening of polymer melts with different topologies and different chemistries investigated at different temperatures.
- Open Access
- 27 November 2024
- Published by Springer Nature in Rheologica Acta
- Vol. 63 (11-12) , 787-799
Analysis of startup shear flow data of linear polystyrene blends: is shear stress undershoot caused by transient shear banding?
Startup shear stress data of a well-defined set of binary polystyrene blends consisting of monodisperse blend components were reported recently by Parisi et al. (J Non-Newtonian Fluid Mech 315:105028, 2023). They presented convincing evidence that in the fast flow of melts with narrow molar mass distribution, shear stress undershoot is observed after the overshoot and before approaching the steady state. For blends with broad relaxation time spectra, no undershoot was found. We analyze this data set by comparison with predictions of the rotation zero stretch (RZS) model (Wagner et al. Rheol Acta 63:573–584, 2024), which is generalized here to the multi-mode MRZS model for polymer blends. We confirm that the steady-state shear viscosity of the monodisperse blend components as well as of the binary blends agrees with the viscosity predicted by the Doi-Edwards independent alignment model. As long as there is no undershoot, the RZS model (monodisperse melts) and the MRZS model (binary blends) result in a quantitative description of the full startup curve of the shear stress growth $${\sigma }_{12}^{+}(\dot{\gamma },t)$$ including overshoot and steady state, based solely on the linear viscoelastic characterization. The shear stress undershoot observed at higher shear rates in melts with narrow molar mass distribution is not described by the RZS or MRZS model. However, the analysis of the experimental data shows clear evidence that undershoot occurs only if after the overshoot, the decreasing shear stress at a higher shear rate undercuts the shear stress at lower rates, i.e., only if $$\partial {\sigma }_{12}^{+}(\dot{\gamma },t)/\partial \dot{\gamma }<0$$ . For blends with broad relaxation time spectra, $$\partial {\sigma }_{12}^{+}(\dot{\gamma },t)/\partial \dot{\gamma }\cong 0$$ and no undershoot is observed. The hypothesis is made that undershoot is due to transient shear banding, which is initiated in shear stress regimes characterized by $$\partial {\sigma }_{12}^{+}(\dot{\gamma },t)/\partial \dot{\gamma }<0$$ and which disappears at larger strains when the shear stress growth $${\sigma }_{12}^{+}(\dot{\gamma },t)$$ approaches the steady state $${\sigma }_{12}(\dot{\gamma })$$ with $$\partial {\sigma }_{12}(\dot{\gamma })/\partial \dot{\gamma }>0$$ . Graphical Abstract- 27 November 2024
- Published by Springer Nature in Rheologica Acta
- Vol. 63 (11-12) , 787-799
Open AccessAnalysis of startup shear flow data of linear polystyrene blends: is shear stress undershoot caused by transient shear banding?
Startup shear stress data of a well-defined set of binary polystyrene blends consisting of monodisperse blend components were reported recently by Parisi et al. (J Non-Newtonian Fluid Mech 315:105028, 2023). They presented convincing evidence that in the fast flow of melts with narrow molar mass distribution, shear stress undershoot is observed after the overshoot and before approaching the steady state. For blends with broad relaxation time spectra, no undershoot was found. We analyze this data set by comparison with predictions of the rotation zero stretch (RZS) model (Wagner et al. Rheol Acta 63:573–584, 2024), which is generalized here to the multi-mode MRZS model for polymer blends. We confirm that the steady-state shear viscosity of the monodisperse blend components as well as of the binary blends agrees with the viscosity predicted by the Doi-Edwards independent alignment model. As long as there is no undershoot, the RZS model (monodisperse melts) and the MRZS model (binary blends) result in a quantitative description of the full startup curve of the shear stress growth $${\sigma }_{12}^{+}(\dot{\gamma },t)$$ including overshoot and steady state, based solely on the linear viscoelastic characterization. The shear stress undershoot observed at higher shear rates in melts with narrow molar mass distribution is not described by the RZS or MRZS model. However, the analysis of the experimental data shows clear evidence that undershoot occurs only if after the overshoot, the decreasing shear stress at a higher shear rate undercuts the shear stress at lower rates, i.e., only if $$\partial {\sigma }_{12}^{+}(\dot{\gamma },t)/\partial \dot{\gamma }<0$$ . For blends with broad relaxation time spectra, $$\partial {\sigma }_{12}^{+}(\dot{\gamma },t)/\partial \dot{\gamma }\cong 0$$ and no undershoot is observed. The hypothesis is made that undershoot is due to transient shear banding, which is initiated in shear stress regimes characterized by $$\partial {\sigma }_{12}^{+}(\dot{\gamma },t)/\partial \dot{\gamma }<0$$ and which disappears at larger strains when the shear stress growth $${\sigma }_{12}^{+}(\dot{\gamma },t)$$ approaches the steady state $${\sigma }_{12}(\dot{\gamma })$$ with $$\partial {\sigma }_{12}(\dot{\gamma })/\partial \dot{\gamma }>0$$ . Graphical Abstract - 1 September 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (9)
Universality and nonuniversality in nonlinear shear rheology of entangled polystyrene solutions and melts with the same number of entanglements
The linear and nonlinear shear rheology of entangled polystyrene (PS) solutions diluted by styrene oligomers with various lengths was compared with the shear rheology of a pure melt having the same number of entanglements (Z) during startup shear and step-shear strain experiments using a cone partitioned-plate geometry. By fixing the same Z, the shear rheology of the PS solutions and the melt shows some universal features in the linear and nonlinear regimes. Undershoot of the shear stress growth coefficient is observed during the startup flow of the PS solutions and depends strongly on the length of the oligomers. The Rotation Zero Stretch model captures the stress overshoot and the steady shear viscosity quantitatively, except at the high shear rates when undershoot is observed. Stress relaxation after step-shear strain experiments reveals that the PS solutions show a transition from type A damping (close to the Doi–Edwards prediction) to type B (weaker than the Doi–Edwards prediction), while the pure melt having the same Z shows a type A response, which suggests that the length of the oligomers influences the nonlinear damping response. The nonuniversality of the nonlinear damping response of the solutions and the melt is possibly due to the changes in flow-induced friction reduction during step-shear strain deformation.
- 1 September 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (9)
Universality and nonuniversality in nonlinear shear rheology of entangled polystyrene solutions and melts with the same number of entanglements
The linear and nonlinear shear rheology of entangled polystyrene (PS) solutions diluted by styrene oligomers with various lengths was compared with the shear rheology of a pure melt having the same number of entanglements (Z) during startup shear and step-shear strain experiments using a cone partitioned-plate geometry. By fixing the same Z, the shear rheology of the PS solutions and the melt shows some universal features in the linear and nonlinear regimes. Undershoot of the shear stress growth coefficient is observed during the startup flow of the PS solutions and depends strongly on the length of the oligomers. The Rotation Zero Stretch model captures the stress overshoot and the steady shear viscosity quantitatively, except at the high shear rates when undershoot is observed. Stress relaxation after step-shear strain experiments reveals that the PS solutions show a transition from type A damping (close to the Doi–Edwards prediction) to type B (weaker than the Doi–Edwards prediction), while the pure melt having the same Z shows a type A response, which suggests that the length of the oligomers influences the nonlinear damping response. The nonuniversality of the nonlinear damping response of the solutions and the melt is possibly due to the changes in flow-induced friction reduction during step-shear strain deformation.
- Open Access
- 25 July 2024
- Published by Springer Nature in Rheologica Acta
- Vol. 63 (8) , 573-584
The effect of rotationality on nonlinear shear flow of polymer melts and solutions
By considering the rotationality of shear flow, we distinguish between tube segments created by reptation before the inception of shear flow and those created during flow. Tube segments created before inception of shear flow experience both stretch and orientation, while tube segments created after inception of flow are not stretched, but are only aligned in the flow direction. Based on this idea, the Rotation Zero Stretch (RZS) model allows for a quantitative description of the start-up of shear flow and stress relaxation after step-shear strain experiments, in agreement with data of polystyrene long/short blends and corresponding polystyrene 3-arm star polymers investigated by Liu et al. (Polymer 2023, 281:126125), as well as the shear viscosity data of poly(propylene carbonate) melts reported by Yang et al. (Nihon Reoroji Gakkaishi 2022, 50:127–135). In the limit of steady-state shear flow, the RZS model converges to the Doi-Edwards IA model, which quantitatively describes the steady-state shear viscosity of linear polymer melts and long/short blends. The assumption of “non-stretching” of tube segments created during rotational flow is therefore in agreement with the available experimental evidence. Three-arm star polymers behave in a similar way as corresponding blends of long and short polymers confirming the solution effect of the short arm in asymmetric stars. The analysis of step-shear strain experiments reveals that stress relaxation is at first dominated by stretch relaxation, followed at times larger than the Rouse stretch relaxation time by relaxation of orientation as described by the damping function of the Doi-Edwards IA model. The RZS model does not require any nonlinear-viscoelastic parameter, but relies solely on the linear-viscoelastic relaxation modulus and the Rouse stretch relaxation time. Graphical Abstract
- 25 July 2024
- Published by Springer Nature in Rheologica Acta
- Vol. 63 (8) , 573-584
Open AccessThe effect of rotationality on nonlinear shear flow of polymer melts and solutions
By considering the rotationality of shear flow, we distinguish between tube segments created by reptation before the inception of shear flow and those created during flow. Tube segments created before inception of shear flow experience both stretch and orientation, while tube segments created after inception of flow are not stretched, but are only aligned in the flow direction. Based on this idea, the Rotation Zero Stretch (RZS) model allows for a quantitative description of the start-up of shear flow and stress relaxation after step-shear strain experiments, in agreement with data of polystyrene long/short blends and corresponding polystyrene 3-arm star polymers investigated by Liu et al. (Polymer 2023, 281:126125), as well as the shear viscosity data of poly(propylene carbonate) melts reported by Yang et al. (Nihon Reoroji Gakkaishi 2022, 50:127–135). In the limit of steady-state shear flow, the RZS model converges to the Doi-Edwards IA model, which quantitatively describes the steady-state shear viscosity of linear polymer melts and long/short blends. The assumption of “non-stretching” of tube segments created during rotational flow is therefore in agreement with the available experimental evidence. Three-arm star polymers behave in a similar way as corresponding blends of long and short polymers confirming the solution effect of the short arm in asymmetric stars. The analysis of step-shear strain experiments reveals that stress relaxation is at first dominated by stretch relaxation, followed at times larger than the Rouse stretch relaxation time by relaxation of orientation as described by the damping function of the Doi-Edwards IA model. The RZS model does not require any nonlinear-viscoelastic parameter, but relies solely on the linear-viscoelastic relaxation modulus and the Rouse stretch relaxation time. Graphical Abstract
- Open Access
- 27 May 2024
- Published by Springer Nature in Rheologica Acta
- Vol. 63 (6) , 407-422
Elongational rheology of 2, 3 and 4 polymer stars connected by linear backbone chains
We consider the elongational rheology of model polystyrene topologies with 2, 3 and 4 stars, which are connected by one (2-star or “Pom-Pom”), two (3-star) and three (4-star) linear backbone chains. The number of arms of each star varies from qa = 3 to 24, the molecular weight of the arms from Mw,a = 25 kg/mol to 300 kg/mol, and the backbone chains from Mw,b = 100 kg/mol to 382 kg/mol. If the length of the arm is shorter than the length of the backbone, i.e. Mw,a < Mw,b, and despite the vastly different topologies considered, the elongational stress growth coefficient can be modeled by the Hierarchical Multi-mode Molecular Stress Function (HMMSF) model, based exclusively on the linear-viscoelastic characterization and a single nonlinear parameter, the dilution modulus. If the length of the arms of the stars is similar or longer than the length of the backbone chain (Mw,a ≥ Mw,b) connecting two stars, the impact of the backbone chain on the rheology vanishes and the elongational stress growth coefficient is dominated by the star topology showing similar features of the elongational stress growth coefficient as those of linear polymers. Graphical Abstract
- 27 May 2024
- Published by Springer Nature in Rheologica Acta
- Vol. 63 (6) , 407-422
Open AccessElongational rheology of 2, 3 and 4 polymer stars connected by linear backbone chains
We consider the elongational rheology of model polystyrene topologies with 2, 3 and 4 stars, which are connected by one (2-star or “Pom-Pom”), two (3-star) and three (4-star) linear backbone chains. The number of arms of each star varies from qa = 3 to 24, the molecular weight of the arms from Mw,a = 25 kg/mol to 300 kg/mol, and the backbone chains from Mw,b = 100 kg/mol to 382 kg/mol. If the length of the arm is shorter than the length of the backbone, i.e. Mw,a < Mw,b, and despite the vastly different topologies considered, the elongational stress growth coefficient can be modeled by the Hierarchical Multi-mode Molecular Stress Function (HMMSF) model, based exclusively on the linear-viscoelastic characterization and a single nonlinear parameter, the dilution modulus. If the length of the arms of the stars is similar or longer than the length of the backbone chain (Mw,a ≥ Mw,b) connecting two stars, the impact of the backbone chain on the rheology vanishes and the elongational stress growth coefficient is dominated by the star topology showing similar features of the elongational stress growth coefficient as those of linear polymers. Graphical Abstract