MGMaria Victória Eiras Grossmann

Maria Victória Eiras Grossmann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maria Victória Eiras Grossmann has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cationic Starch and Polyvinyl Alcohol Composite Sheets Produced by Extrusion-Calendering

    by Juliano Zanela, Ana Paula Bilck, Gracielle Johann, Marianne Ayumi Shirai, Maria Victoria Eiras Grossmann, Fabio Yamashita

    This study evaluated the effect of cationic cassava starch with different degrees of substitution (DS: 0.019, 0.027, and 0.033 mol/mol) and polyvinyl alcohol (PVA) with different hydrolysis degrees (HD: 88 and 98%) on the properties of sheets produced by extrusion-calendering, using glycerol as a plasticizer. Machine learning (ML) models were used to predict sheet properties. The HD influenced material properties more significantly than the DS of cationic starch, with higher HD PVA yielding superior mechanical performance regardless of starch type. The sheets exhibited high thermal stability and processing continuity during extrusion-calendering, demonstrating laboratory-scale production viability. ML demonstrated that Gradient Boosting models better predicted tensile strength and elongation at break with R2 ~0.98 and MAPE of the 7.1 and 2.8%, respectively; the Young’s modulus was adequately predicted by the Decision Tree model (R2 ~0.96 and MAPE ~8.1%) and the apparent opacity was better predicted by the Extreme Gradient Boosting model (R2 ~0.90 and MAPE ~4.7%). For these adjustments, the HD was more important than DS when predicting the properties of the sheets, as observed experimentally.

  • pH sensitive phosphate crosslinked films of starch‐carboxymethyl cellulose

    by Caroline Cagnin, Bruno Matheus Simões, Fábio Yamashita, Gizilene Maria de Carvalho, Maria Victória Eiras Grossmann

    This work aims to develop hydrogel films of starch and carboxymethyl cellulose (CMC) crosslinked with sodium trimetaphosphate (STMP) and to characterize some of their properties. Starch and STMP (S/T), starch and CMC (S/C), and mixed (S/T/C) films were prepared by casting. The degree of substitution, morphology, swelling degree, FTIR, mechanical properties, and sorption isotherms were studied. Reticulated samples (S/T and S/T/C) showed the same degree of substitution (0.050 ± 0.001). All films presented homogeneous morphology, but the mixed film showed greater roughness. Crosslinking increased the swelling capacity of the mixed hydrogel at pH 7, although it remained decreased concerning the S/T hydrogel. However, this property was sensitive to pH variations. The mixed film (S/T/C) showed greater mechanical resistance. The casting process was efficient to produce hydrogel films of starch/CMC crosslinked with STMP and the general results demonstrated the advantages of the mixed hydrogel.


  • Hydrogels of starch/carboxymethyl cellulose crosslinked with sodium trimetaphosphate via reactive extrusion

    by Caroline Cagnin, Bruno Matheus Simões, Fábio Yamashita, Avacir Casanova Andrello, Gizilene Maria de Carvalho, Maria Victória Eiras Grossmann

    Hydrogels are materials with advantages in specific applications, such as, retention of food active compounds. This work aims to develop starch (S)/carboxymethyl cellulose (CMC) hydrogels with porous structure, using reactive extrusion to promote crosslinking with sodium trimetaphosphate (STMP). The expansion, porosity, degree of substitution, gel fraction, swelling properties, and FTIR are studied, comparing S, S/CMC, S/STMP, and S/CMC/STMP formulations. Samples containing STMP present the same degree of substitution (0.050 ± 0.001). Higher porosity and percentage of open pores are observed in the mixed hydrogel (S/CMC/STMP). Crosslinking increase the swelling capacity at pH 7, and this property, just like the gel fraction, are sensitive to pH variations. The hydrogel S/CMC present the highest swelling rate compared with the other samples, suggesting strong interaction between components. The reactive extrusion process is efficient to produce starch and starch/CMC hydrogels crosslinked with STMP and the overall results demonstrate the advantages of the mixed hydrogel.


  • Citric acid as crosslinking agent in starch/xanthan gum hydrogels produced by extrusion and thermopressing

    by Bruno Matheus Simões, Caroline Cagnin, Fabio Yamashita, Juliana Bonametti Olivato, Patrícia Salomão Garcia, Suzana Mali de Oliveira, Maria Victória Eiras Grossmann


  • Open Access

    Comparison and quality evaluation of hull-less and covered Brazilian barley for food industry application

    by Leniza Ludwig, V. Carpentieri-Pípolo, Karla Bianca Almeida Lopes, Euclydes Minella, Adelaide del Pino Beleia, Maria Victoria Eiras Grossmann

    Comparação e avaliação da qualidade de cevadas brasileiras nuas e cervejeiras para aplicações em indústria de alimentos - DOI:10.5039/agraria.v14i4a6942


  • Open Access

    Computer Vision Classification of Barley Flour Based on Spatial Pyramid Partition Ensemble

    by Jessica Fernandes Lopes, Leniza Ludwig, Douglas Fernandes Barbin, Maria Victória Eiras Grossmann, Sylvio Barbon

    Imaging sensors are largely employed in the food processing industry for quality control. Flour from malting barley varieties is a valuable ingredient in the food industry, but its use is restricted due to quality aspects such as color variations and the presence of husk fragments. On the other hand, naked varieties present superior quality with better visual appearance and nutritional composition for human consumption. Computer Vision Systems (CVS) can provide an automatic and precise classification of samples, but identification of grain and flour characteristics require more specialized methods. In this paper, we propose CVS combined with the Spatial Pyramid Partition ensemble (SPPe) technique to distinguish between naked and malting types of twenty-two flour varieties using image features and machine learning. SPPe leverages the analysis of patterns from different spatial regions, providing more reliable classification. Support Vector Machine (SVM), k-Nearest Neighbors (k-NN), J48 decision tree, and Random Forest (RF) were compared for samples’ classification. Machine learning algorithms embedded in the CVS were induced based on 55 image features. The results ranged from 75.00% (k-NN) to 100.00% (J48) accuracy, showing that sample assessment by CVS with SPPe was highly accurate, representing a potential technique for automatic barley flour classification.


  • Open Access

    Crosslinking starch/oat hull mixtures for use in composites with PLA

    by Thamires da Silva Peixoto, Fabio Yamashita, Ana Paula Bilck, Gizilene Maria Carvalho, Maria Victoria Eiras Grossmann

    Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of substitution, FT-IR, and thermal properties. The native and modified mixtures were processed by injection molding, together with PLA and glycerol. The microstructure, mechanical properties, shrinkage, density, and thermal properties of the composites were determined. The FT-IR results, increase in phosphorus content and thermal stability after starch/fiber mixture treatment with STMP suggested the occurrence of crosslinking. Better interfacial adhesion between oat hulls and the polymeric matrix was observed in electron micrographs of the composites containing the modified components. Slight decreases in tensile strength and modulus were observed in the modified composites, suggesting that extrusion and subsequent milling may have broken some structures/linkages.


  • Open Access

    Sericin as compatibilizer in starch/ polyester blown films

    by Patrícia Salomão Garcia, Franciele Rezende Barbosa Turbiani, Alessandra Machado Baron, Guilherme Luiz Brizola, Mariane Alves Tavares, Fabio Yamashita, Daniel Eiras, Maria Victória Eiras Grossmann

    This study investigated the effects of low concentrations of sericin (≤ 1.5 wt%) in starch- poly(butylene-adipate-co-terephthalate) (PBAT) films. The films were produced by blown extrusion and mechanical, barrier and structural properties were determined. Films containing 1.0 and 1.5 wt% sericin showed higher tensile strength (6.41 and 6.59 MPa) and Young's modulus (90.88 and 132.71 MPa) compared with film without sericin (4.76 MPa and 18.64 MPa). When 0.5 wt% of sericin was used, the elongation was reduced by 62%. The addition of sericin in a concentration of 1.5% (w/w) decreased the water vapor permeability of films from 7.55 to 5.94 g (m s Pa)-1, likely due to the formation of a more homogeneous and compact matrix. Based on these results, a mechanism of action is proposed, whereby sericin acts at the interface of the polymers (starch and PBAT), reducing the interfacial tension and enhancing compatibility.


  • Starch–Carboxymethyl Cellulose (CMC) Mixtures Processed by Extrusion

    by Anna Flavia Veronese, Thais de Souza Rocha, Celia Maria Landi Franco, Mariana Souza Costa, Maria Victoria Eiras Grossmann

    Some properties of native starch limit its applications and thus, modifications to its structure or association with other ingredients is recommended. The objective of this work is to study the effects of extrusion on mixtures of corn starch with 1, 5, and 10% w/w of carboxymethyl cellulose (CMC). CMC acts as a lubricant during processing, making it less drastic and preserving some starch granules against rupture. Increases in CMC concentration generate an increase in viscosity but have no significant effect on thermal properties. No new covalent linkages are observed, suggesting that interactions between polymers occurs via hydrogen bonds. The sample containing 5% w/w CMC added to starch prior to extrusion forms firmer and more stable instant gels compared to the sample in which the same level of CMC is added to the starch extruded without gum. Therefore, extruded mixtures of corn starch‐CMC can be considered as new thickening and gelling ingredients for application, mainly, in instant foods.


  • Compatibilization of starch/poly(butylene adipate‐co‐terephthalate) blown films using itaconic acid and sodium hypophosphite

    by Patrícia S. Garcia, Alessandra M. Baron, Fabio Yamashita, Suzana Mali, Daniel Eiras, Maria Victoria E. Grossmann

    Itaconic acid (IA) has potential as a compatibilizing agent in polymeric blends due to its unique chemical characteristics. Sodium hypophosphite (SHP) has been studied as a catalyst in esterifying reactions using multicarboxylic acids. Starch/poly(butylene adipate‐co‐terephthalate) blown films containing IA, with and without SHP, were produced. The film containing IA presented higher tensile strength (8.166 MPa) and elongation (891.473%) than the control film (5.548 MPa and 487.637%, respectively). When SHP was added (sample IA‐SHP), tensile strength increased even more (9.215 MPa); however, elongation (636.821%) was lower than in the IA film. This behavior was attributed to crosslinking between two starch itaconoate molecules intermediated by SHP. The increase in the compatibility between the polymeric phases justified the lower permeability to water vapor of the IA‐SHP films and was responsible for the production of films with a more compact and homogeneous structure. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46629.