Boris Kostrov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Boris Kostrov has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Vladimir Ruchkin
Ryazan State University, Russian Federation
7 shared publicationsEkaterina Ruchkina
Ryazan State Radio Engineering University, Russian Federation
6 shared publications- Aleksandr Kolesenkov
Ryazan State Radio Engineering University, Russian Federation
5 shared publications D.V. Grigorenko
3 shared publicationsVladimir Fulin
Ryazan State University, Russian Federation
3 shared publications- E.V. Ruchkina2 shared publications
Latest Publications
- 1 January 2025
- Published by Publishing house "Radiotekhnika" in Dynamics of Complex Systems - XXI century
- Vol. 19 (2) , 30-39
Hardware-software co-design of intelligent multi-core cyber-physical systems-on-chip with universality, scalability and energy-efficiency properties
The possibilities of intelligent multi-core Cyber-Physical System on Chip (CPSoN) for providing high-quality properties of universality, scalability and energy-efficiency based on modern VLSI K1879ВМ8Я and software Neuro Matrix are shown. A methodology for intelligent management of neuroprocessor resources is proposed for the purpose of joint design of hardware and software (Co-Design) based on Intellectual Multiprocessing and set-theoretical equivalence of a group of algorithms, a group of cores and a group of robots on a chip. Mathematical formalization of the analysis of various structures is carried out for the purpose of an optimal choice allowing us to design software-reconfigurable multi-core neuroprocessor architecture for processing large data flows. Modeling multi-criteria control for choosing the best structure according to various technical characteristics is carried out with emphasis on significant speed up the work of neural network tools, accelerators and servers.
- 1 January 2025
- Published by Publishing house "Radiotekhnika" in Dynamics of Complex Systems - XXI century
- Vol. 19 (2) , 30-39
Hardware-software co-design of intelligent multi-core cyber-physical systems-on-chip with universality, scalability and energy-efficiency properties
The possibilities of intelligent multi-core Cyber-Physical System on Chip (CPSoN) for providing high-quality properties of universality, scalability and energy-efficiency based on modern VLSI K1879ВМ8Я and software Neuro Matrix are shown. A methodology for intelligent management of neuroprocessor resources is proposed for the purpose of joint design of hardware and software (Co-Design) based on Intellectual Multiprocessing and set-theoretical equivalence of a group of algorithms, a group of cores and a group of robots on a chip. Mathematical formalization of the analysis of various structures is carried out for the purpose of an optimal choice allowing us to design software-reconfigurable multi-core neuroprocessor architecture for processing large data flows. Modeling multi-criteria control for choosing the best structure according to various technical characteristics is carried out with emphasis on significant speed up the work of neural network tools, accelerators and servers.
- 1 January 2025
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 1
STATISTICAL ANALYSIS OF THE REPLENISHMENT OF ENGINEERING PERSONNEL ON THE EXAMPLE OF THE RYAZAN REGION
Background. This paper provides a statistical and analytical analysis of the prospects for providing engineering personnel to enterprises based on statistical data on the graduation of schoolchildren from the Ryazan region and the results of the Unified State Exam. The purpose of the work is to analyze the overall potential of the region to increase the volume of training in engineering areas of training and specialties and to identify trends at the stage of general training of applicants in the main subjects necessary for the training of engineering personnel in educational institutions of secondary general education, to identify patterns and trends in the arrays of sample populations graduating from grades 9 and 11 in the period from 2017 to 2025. The tasks of processing a number of sample sets of the 9th and 11th grade graduates, analyzing the choice of subjects for the Unified State Exam (USE), distributing applicants by USE subjects in the context of the potential replenishment of engineering personnel for the period from 2019 to 2024 and overcoming the minimum thresholds for admission to universities are considered. Materials and methods. In preparing the materials of the article, methods of data preparation and purification, processing of sample populations based on the construction of variation series, determination of sample fractions, the histogram method for visualizing the data obtained, correlation and regression analysis were used. The analysis of the results of the Unified State Exam is carried out from the perspective of overcoming / not overcoming the minimum threshold set by the Ministry of Education and Science of the Russian Federation for universities subordinate to it. Results. Based on the results of the analysis, downward trends have been identified in the prospect of replenishing engineering staff associated with a decrease in the quality of school education, and a pattern has been established for a decrease in the number of students taking the Unified State Exam in physics with a simultaneous, but disproportionate, increase in a similar indicator in computer science. The absolute minimum of the Unified State Exam results in many subjects critical for engineering education in 2023 has been revealed. Conclusions. The increase in the number of budget places for engineering training and specialties does not lead to an increase in the popularity of the latter. Such phenomena as shortages, and especially shortages in 2023, when problems with admission arose in a number of metropolitan universities, have become commonplace against the background of a decrease in the quality of applicants' training.
- 1 January 2025
- Published by Penza State University in Models, systems, networks in economics, technology, nature and society
- No. 1
STATISTICAL ANALYSIS OF THE REPLENISHMENT OF ENGINEERING PERSONNEL ON THE EXAMPLE OF THE RYAZAN REGION
Background. This paper provides a statistical and analytical analysis of the prospects for providing engineering personnel to enterprises based on statistical data on the graduation of schoolchildren from the Ryazan region and the results of the Unified State Exam. The purpose of the work is to analyze the overall potential of the region to increase the volume of training in engineering areas of training and specialties and to identify trends at the stage of general training of applicants in the main subjects necessary for the training of engineering personnel in educational institutions of secondary general education, to identify patterns and trends in the arrays of sample populations graduating from grades 9 and 11 in the period from 2017 to 2025. The tasks of processing a number of sample sets of the 9th and 11th grade graduates, analyzing the choice of subjects for the Unified State Exam (USE), distributing applicants by USE subjects in the context of the potential replenishment of engineering personnel for the period from 2019 to 2024 and overcoming the minimum thresholds for admission to universities are considered. Materials and methods. In preparing the materials of the article, methods of data preparation and purification, processing of sample populations based on the construction of variation series, determination of sample fractions, the histogram method for visualizing the data obtained, correlation and regression analysis were used. The analysis of the results of the Unified State Exam is carried out from the perspective of overcoming / not overcoming the minimum threshold set by the Ministry of Education and Science of the Russian Federation for universities subordinate to it. Results. Based on the results of the analysis, downward trends have been identified in the prospect of replenishing engineering staff associated with a decrease in the quality of school education, and a pattern has been established for a decrease in the number of students taking the Unified State Exam in physics with a simultaneous, but disproportionate, increase in a similar indicator in computer science. The absolute minimum of the Unified State Exam results in many subjects critical for engineering education in 2023 has been revealed. Conclusions. The increase in the number of budget places for engineering training and specialties does not lead to an increase in the popularity of the latter. Such phenomena as shortages, and especially shortages in 2023, when problems with admission arose in a number of metropolitan universities, have become commonplace against the background of a decrease in the quality of applicants' training.
- 4 April 2024
- Published by Publishing house "Radiotekhnika" in Neurocomputers
Сyberphysical representation of robots of the neuro-network collective of automata on a chip
The article examines modern innovative technologies, which are a continuation, generalization of previously created technologies, deepening and expanding existing concepts, their application in new areas and directions of development of society. The possibilities of a significant leap forward of the above technologies are shown due to the effective use and successful transition within the framework of continuity and compatibility of hardware and software security for citizens and tourists to 5G and 6G technologies, unmanned transport management and virtual reality addition, etc. Based on analysis, abstract synthesis, minimization and structural synthesis, a conceptual model of joint design of hardware and software of the Mealy and Moore automata is proposed due to the classification of control options for a team of algorithms and a team of neural network automata and robots based on a tensor computer on a K1879VM 8YA chip and a tensor module NM Card. Based on the importance of modern mobile CPS and the areas of application of various sectors of industry, economics and social services, the requirements, challenges and feasible implementations of architectures for the joint design of a neural network collective of automata in the form of a robot on a chip using abstract Mealy and Moore automata and a collective of automata are formed. The interchangeability and equivalence of Mealy and Moore automata ensure the invariance of options and the ability to check the performance of one relative to the other. By creating one closest model, you receive confirmation of functionality through another. This versatility of using both models proves the unambiguity and adequacy of the decisions made. Analysis, abstract synthesis, minimization and structural synthesis are used to formalize a conceptual model of hardware-software co-design (Co-Design) of robots based on Mealy and Moore automata. The cyber physical representation of the theoretical - multiple approach and analysis of the equivalence of information processing routines from the point of view of the concept of joint design of hardware and software allows for a unified and holistic study of clustering processes, parallel organization at the level of microarchitecture and microarchitecture in order to increase operational efficiency, versatility, and scalability and optimization of energy consumption. The simulation results are presented as a description of the control of an expert system for the joint selection of hardware and software of a robot based on MYAMPSK or MCMPSoS through the nuclear organization of the CPS microarchitecture. Depending on the initial set of algorithms based on the tensor computer on the K1879VM 8Ya chip or the NM Card tensor module, it is proposed to implement the above areas of end-to-end technologies as tools for processing structured and unstructured data.
- 4 April 2024
- Published by Publishing house "Radiotekhnika" in Neurocomputers
Сyberphysical representation of robots of the neuro-network collective of automata on a chip
The article examines modern innovative technologies, which are a continuation, generalization of previously created technologies, deepening and expanding existing concepts, their application in new areas and directions of development of society. The possibilities of a significant leap forward of the above technologies are shown due to the effective use and successful transition within the framework of continuity and compatibility of hardware and software security for citizens and tourists to 5G and 6G technologies, unmanned transport management and virtual reality addition, etc. Based on analysis, abstract synthesis, minimization and structural synthesis, a conceptual model of joint design of hardware and software of the Mealy and Moore automata is proposed due to the classification of control options for a team of algorithms and a team of neural network automata and robots based on a tensor computer on a K1879VM 8YA chip and a tensor module NM Card. Based on the importance of modern mobile CPS and the areas of application of various sectors of industry, economics and social services, the requirements, challenges and feasible implementations of architectures for the joint design of a neural network collective of automata in the form of a robot on a chip using abstract Mealy and Moore automata and a collective of automata are formed. The interchangeability and equivalence of Mealy and Moore automata ensure the invariance of options and the ability to check the performance of one relative to the other. By creating one closest model, you receive confirmation of functionality through another. This versatility of using both models proves the unambiguity and adequacy of the decisions made. Analysis, abstract synthesis, minimization and structural synthesis are used to formalize a conceptual model of hardware-software co-design (Co-Design) of robots based on Mealy and Moore automata. The cyber physical representation of the theoretical - multiple approach and analysis of the equivalence of information processing routines from the point of view of the concept of joint design of hardware and software allows for a unified and holistic study of clustering processes, parallel organization at the level of microarchitecture and microarchitecture in order to increase operational efficiency, versatility, and scalability and optimization of energy consumption. The simulation results are presented as a description of the control of an expert system for the joint selection of hardware and software of a robot based on MYAMPSK or MCMPSoS through the nuclear organization of the CPS microarchitecture. Depending on the initial set of algorithms based on the tensor computer on the K1879VM 8Ya chip or the NM Card tensor module, it is proposed to implement the above areas of end-to-end technologies as tools for processing structured and unstructured data.
- Open Access
- 1 January 2023
- Published by Institute for System Programming of the Russian Academy of Sciences in Proceedings of the Institute for System Programming of the RAS
- Vol. 35 (2) , 157-168
Parallel computations in problems of reconstruction of distorted images in spatial-spectral form
Объектом исследования является процесс обработки изображения при подготовке к передаче данных, а также последующее восстановление. Предметом исследования является применение параллельных вычислений в задачах обработки изображений. Целью статьи является исследование метода восстановления изображения с коррекцией искажения вектора передачи на основе ввода значения тренда его соседей. Актуальность данной темы определяется необходимостью эффективного выполнения операций, предшествующих и следующих за передачей по каналу связи. В ходе экспериментальной части были получены результаты в виде значений времени выполнения при последовательном выполнении и использовании параллельных вычислений, что дало ожидаемый прирост ускорения. Поскольку изображение состоит из несвязанных частей, его можно успешно обрабатывать, применяя распараллеливание данных.
- 1 January 2023
- Published by Institute for System Programming of the Russian Academy of Sciences in Proceedings of the Institute for System Programming of the RAS
- Vol. 35 (2) , 157-168
Open AccessParallel computations in problems of reconstruction of distorted images in spatial-spectral form
Объектом исследования является процесс обработки изображения при подготовке к передаче данных, а также последующее восстановление. Предметом исследования является применение параллельных вычислений в задачах обработки изображений. Целью статьи является исследование метода восстановления изображения с коррекцией искажения вектора передачи на основе ввода значения тренда его соседей. Актуальность данной темы определяется необходимостью эффективного выполнения операций, предшествующих и следующих за передачей по каналу связи. В ходе экспериментальной части были получены результаты в виде значений времени выполнения при последовательном выполнении и использовании параллельных вычислений, что дало ожидаемый прирост ускорения. Поскольку изображение состоит из несвязанных частей, его можно успешно обрабатывать, применяя распараллеливание данных.
- Open Access
- 1 September 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 75, 03006
Theoretical aspects of aerospace image processing in quasi two-dimensional spectral space
The article regards digital images as mathematical objects and uses a co-variation matrix of element brightness values to analyze an autocorrelation matrix of images – a dispersion matrix, to define all significant properties of images with the help of mathematical statistics and matrix computing. We suggest theoretic and methodological generalizations in the field of aerospace photo processing, basing on choice of the most advantageous variant of constructing basic functions among various Vilenkin-Chrestenson functions (VCF) in a non-trigonometrical minimally available construction form as Walsh functions with an original ‘carcass’ of Rademacher functions. The methodology of this research is based on a set of theorems that are different from corresponding theorems of classical spectral analysis [5]. The conclusions of the theorems allow constructing effective algorithms of filtration and correlation analysis of aerospace images when noises and distortions appear.
- 1 September 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 75, 03006
Open AccessTheoretical aspects of aerospace image processing in quasi two-dimensional spectral space
The article regards digital images as mathematical objects and uses a co-variation matrix of element brightness values to analyze an autocorrelation matrix of images – a dispersion matrix, to define all significant properties of images with the help of mathematical statistics and matrix computing. We suggest theoretic and methodological generalizations in the field of aerospace photo processing, basing on choice of the most advantageous variant of constructing basic functions among various Vilenkin-Chrestenson functions (VCF) in a non-trigonometrical minimally available construction form as Walsh functions with an original ‘carcass’ of Rademacher functions. The methodology of this research is based on a set of theorems that are different from corresponding theorems of classical spectral analysis [5]. The conclusions of the theorems allow constructing effective algorithms of filtration and correlation analysis of aerospace images when noises and distortions appear.
- Open Access
- 1 September 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 75, 08004
Cluster management of computing resources
The study suggests management of computing resources through set-theoretic clustering. The research proposes production modelling of knowledge — rules of managing explicit and fuzzy structures, according to their technical specifications: sustem productivity, number of computing modules, capacity of microprocessor memory, etc. The paper describes an algorithm of “evaluation of management criterion value”, according to the additive utility function.
- 1 September 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 75, 08004
Open AccessCluster management of computing resources
The study suggests management of computing resources through set-theoretic clustering. The research proposes production modelling of knowledge — rules of managing explicit and fuzzy structures, according to their technical specifications: sustem productivity, number of computing modules, capacity of microprocessor memory, etc. The paper describes an algorithm of “evaluation of management criterion value”, according to the additive utility function.
- 1 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 59-63
Smart compiler embedded computing systems based on cluster parallelism
The current research looks at possibilities of creating a smart compiler based on explicit and implicit cluster parallelism, and suggests a design option. With this view, smart compilation procedures are studied, and we also analyze the algorithms of explicit parallelism, and define a production model of and expert system to monitor operations and build a route. We define an algorithm of implicit parallelism of multi-criterion fuzzy choice based on definitions of algorithms of “criteria value evaluation” and “route effectiveness evaluation”.
- 1 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 59-63
Smart compiler embedded computing systems based on cluster parallelism
The current research looks at possibilities of creating a smart compiler based on explicit and implicit cluster parallelism, and suggests a design option. With this view, smart compilation procedures are studied, and we also analyze the algorithms of explicit parallelism, and define a production model of and expert system to monitor operations and build a route. We define an algorithm of implicit parallelism of multi-criterion fuzzy choice based on definitions of algorithms of “criteria value evaluation” and “route effectiveness evaluation”.
- 1 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 30-34
Forest fire monitoring by means of cyber-physical system
The work analyzes technical and experimental research in the field of fire monitoring. It proposes a technique of using cyber-physical systems for monitoring natural and technogenic emergencies, providing information and algorithmic support for a cyber-physical system of forest-fire monitoring. It also provides hierarchical structures of components for a cyber-physical system of forest-fire monitoring. The methodology is implemented as development of intelligent telecommunications structures on the base of the MB 7707 neuroprocessor systems that can undergo training in conditions of uncertainty. The work is accomplished within the framework of the Russian Foundation for Basic Research (RFBR) grant 14-07-00261A.
- 1 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 30-34
Forest fire monitoring by means of cyber-physical system
The work analyzes technical and experimental research in the field of fire monitoring. It proposes a technique of using cyber-physical systems for monitoring natural and technogenic emergencies, providing information and algorithmic support for a cyber-physical system of forest-fire monitoring. It also provides hierarchical structures of components for a cyber-physical system of forest-fire monitoring. The methodology is implemented as development of intelligent telecommunications structures on the base of the MB 7707 neuroprocessor systems that can undergo training in conditions of uncertainty. The work is accomplished within the framework of the Russian Foundation for Basic Research (RFBR) grant 14-07-00261A.
- Open Access
- 25 March 2016
- Published by EDP Sciences in ITM Web of Conferences
- Vol. 6, 03007
The research of image segmentation algorithms based on Vilenkin-Crestensen functions
ITM Web of Conferences, open-access proceedings
- 25 March 2016
- Published by EDP Sciences in ITM Web of Conferences
- Vol. 6, 03007
Open AccessThe research of image segmentation algorithms based on Vilenkin-Crestensen functions
ITM Web of Conferences, open-access proceedings
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23775475,p. 134-138
Image path modeling
The article is devoted to the instrumental means of the design of video data link, which are mounted on board the aircraft. The information concerning the possibilities of the program model use for the choice of the basic hosts and image translation options via physical "channel with gaps" is given in the article.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23775475,p. 134-138
Image path modeling
The article is devoted to the instrumental means of the design of video data link, which are mounted on board the aircraft. The information concerning the possibilities of the program model use for the choice of the basic hosts and image translation options via physical "channel with gaps" is given in the article.