DRDiego Omar Sanchez Ramirez

Diego Omar Sanchez Ramirez

*This is an algorithmically generated author record based on publicly available information.

Diego Omar Sanchez Ramirez has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Upcycled Keratinous Waste Enables Robust, Dust-Free Silica Aerogel Superinsulators

    by Diego O. Sanchez Ramirez, Kamila Klek, Stephen Lemein Musere, Alessio Varesano, Serena Facchiano, Claudia Vineis, Maria Micaela Guaman Torres, Yaxing Li, Jing Wang, Wim J. Malfait, et al.

    Keratin extraction generates large amounts of underutilized waste streams that are typically discarded despite retaining functional molecular components. Here, keratinous waste composed of cysteine-S-sulfonated keratin (CSSK) and non-dissolved fibers (NDF) is directly upcycled to reinforce silica aerogels via a co-gelation strategy. Partial dissolution of CSSK and structural bridging by NDF enable the formation of an interconnected hybrid network with enhanced interfacial coupling. pH modulation governs both interfacial interactions and pore architecture: alkaline conditions promote homogeneous silica deposition and stronger bonding, whereas acidic conditions induce a denser, microporous structure. The resulting composites exhibit improved mechanical robustness and reduced dust release. All samples show superinsulating behavior (λ < 26 mW m−1 K−1), with thermal transport determined by the interplay between the pore structure and density. Under a combined thermal gradient (∼300/∼65 °C) and compressive load, the composite materials maintain structural integrity and stable insulation performance, demonstrating suitability for harsh environments.

  • Open Access

    Fabrication and characterization of aerogels from cysteine-S-sulfonated keratin for drug delivery applications

    by Diego O. Sanchez Ramirez, Clara López-Iglesias, Stella Plazzotta, Claudia Vineis, Carlos A. García-González, Sonia Calligaris, Lara Manzocco, Alessio Varesano


  • Open Access

    Supercritical CO2 sterilization for surgical gowns: From disposal towards reuse

    by María Blanco-Vales, María Carracedo-Pérez, Diego Omar Sánchez-Ramírez, Alessio Varesano, Beatriz Magariños, Carlos A. García-González, Clara López-Iglesias


  • Open Access

    Current trends in textile wastewater treatment—bibliometric review

    by Mohammad Tajul Islam, Abdullah Al Mamun, Abul Fazal Mohammad Fahad Halim, Roberta Peila, Diego Omar Sanchez Ramirez

    A bibliometric study using 1992 to 2021 database of the Science Citation Index Expanded was carried out to identify which are the current trends in textile wastewater treatment research. The study aimed to analyze the performance of scholarly scientific communications in terms of yearly publications/citations, total citations, scientific journals, and their categories in the Web of Sciences, top institutions/countries and research trends. The annual publication of scientific articles fluctuated in the first ten years, with a steady decrease for the last twenty years. An analysis of the most common terms used in the authors’ keywords, publications’ titles, and KeyWords Plus was carried out to predict future trends and current research priorities. Adsorbent nanomaterials would be the future of wastewater treatment for decoloration of the residual dyes in the wastewater. Membranes and electrolysis are important to demineralize textile effluent for reusing wastewater. Modern filtration techniques such as ultrafiltration and nanofiltration are advanced membrane filtration applications.


  • Open Access

    Wool Keratin Nanofibers for Bioinspired and Sustainable Use in Biomedical Field

    by Diego Omar Sanchez Ramirez, Claudia Vineis, Iriczalli Cruz-Maya, Cinzia Tonetti, Vincenzo Guarino, Alessio Varesano

    Keratin is a biocompatible and biodegradable protein as the main component of wool and animal hair fibers. Keratin-based materials support fibroblasts and osteoblasts growth. Keratin has been extracted by sulphitolysis, a green method (no harmful chemicals) with a yield of 38–45%. Keratin has been processed into nanofibers from its solutions by electrospinning. Electrospinning is a versatile and easy-to-use technique to generate nanofibers. It is an eco-friendly and economical method for the production of randomly and uniaxially oriented polymeric nanofibers. Thanks to their high specific surface area, nanofibers have great potential in the biomedical field. Keratin nanofibers have received significant attention in biomedical applications, such as tissue engineering and cell growth scaffolds, for their biocompatibility and bio-functionality. Accordingly, we propose an extensive overview of recent studies focused on the optimization of keratinbased nanofibers, emphasizing their peculiar functions for cell interactions and the role of additive phases in blends or composite systems to particularize them as a function of specific applications (i.e., antibacterial).


  • Design of cysteine-S-sulfonated keratin via pH driven processes: Micro-Structural Properties, biocidal activity and in vitro validation

    by Diego O. Sanchez Ramirez, Cinzia Tonetti, Iriczalli Cruz-Maya, Vincenzo Guarino, Roberta Peila, Riccardo A. Carletto, Alessio Varesano, Claudia Vineis


  • Open Access

    Design of Asymmetric Nanofibers-Membranes Based on Polyvinyl Alcohol and Wool-Keratin for Wound Healing Applications

    by Diego O. Sanchez Ramirez, Iriczalli Cruz-Maya, Claudia Vineis, Cinzia Tonetti, Alessio Varesano, Vincenzo Guarino

    The development of asymmetric membranes—i.e., matching two fibrous layers with selected composition and morphological properties to mimic both the epidermis and dermis—currently represents one of the most promising strategies to support skin regeneration during the wound healing process. Herein, a new asymmetric platform fabricated by a sequential electrospinning process was investigated. The top layer comprises cross-linked polyvinylalcohol (PVA) nanofibers (NFs)—from water solution—to replicate the epidermis’s chemical stability and wettability features. Otherwise, the bottom layer is fabricated by integrating PVA with wool-keratin extracted via sulfitolysis. This protein is a biocompatibility polymer with excellent properties for dermis-like structures. Morphological characterization via SEM supported by image analysis showed that the asymmetric membrane exhibited average fiber size—max frequency diameter 450 nm, range 1.40 μm—and porosity suitable for the healing process. FTIR-spectrums confirmed the presence of keratin in the bottom layer and variations of keratin-secondary structures. Compared with pure PVA-NFs, keratin/PVA-NFs showed a significant improvement in cell adhesion in in vitro tests. In perspective, these asymmetric membranes could be promisingly used to confine active species (i.e., antioxidants, antimicrobials) to the bottom layer to support specific cell activities (i.e., proliferation, differentiation) in wound healing applications.


  • Open Access

    Wool Keratin-Based Nanofibres—In Vitro Validation

    by Diego Omar Sanchez Ramirez, Iriczalli Cruz-Maya, Claudia Vineis, Vincenzo Guarino, Cinzia Tonetti, Alessio Varesano

    Protein-based nanofibres are commonly used in the biomedical field to support cell growth. For this study, the cell viability of wool keratin-based nanofibres was tested. Membranes were obtained by electrospinning using formic acid, hexafluoroisopropanol, and water as solvents. For aqueous solutions, polyethylene oxide blended with keratin was employed, and their use to support in vitro cell interactions was also validated. Morphological characterization and secondary structure quantification were carried out by SEM and FTIR analyses. Although formic acid produced the best nanofibres from a morphological point of view, the results showed a better response to cell proliferation after 14 days in the case of fibres from hexafluoroisopropanol solution. Polyethylene oxide in keratin nanofibres was demonstrated, over time, to influence in vitro cell interactions, modifying membranes-wettability and reducing the contact between keratin chains and water molecules, respectively.


  • Synergistic effect of sericin and keratin in gelatin based nanofibers for in vitro applications

    by C. Vineis, I. Cruz Maya, S. Mowafi, A. Varesano, D.O. Sánchez Ramírez, M. Abou Taleb, C. Tonetti, V. Guarino, H. El-Sayed


  • Open Access

    Safety Assessment of Polypyrrole Nanoparticles and Spray-Coated Textiles

    by Rossella Bengalli, Luisa Fiandra, Claudia Vineis, Diego Omar Sanchez-Ramirez, Nuno G. Azoia, Alessio Varesano, Paride Mantecca

    Polypyrrole (PPy) nanoparticles (NPs) are used for the coating of materials, such as textiles, with biomedical applications, including wound care and tissue engineering, but they are also promising antibacterial agents. In this work, PPy NPs were used for the spray-coating of textiles with antimicrobial properties. The functional properties of the materials were verified, and their safety was evaluated. Two main exposure scenarios for humans were identified: inhalation of PPy NPs during spray (manufacturing) and direct skin contact with NPs-coated fabrics (use). Thus, the toxicity properties of PPy NPs and PPy-coated textiles were assessed by using in vitro models representative of the lung and the skin. The results from the materials’ characterization showed the stability of both the PPy NP suspension and the textile coating, even after washing cycles and extraction in artificial sweat. Data from an in vitro model of the air–blood barrier showed the low toxicity of these NPs, with no alteration of cell viability and functionality observed. The skin toxicity of PPy NPs and the coated textiles was assessed on a reconstructed human epidermis model following OECD 431 and 439 guidelines. PPy NPs proved to be non-corrosive at the tested conditions, as well as non-irritant after extraction in artificial sweat at two different pH conditions. The obtained data suggest that PPy NPs are safe NMs in applications for textile coating.