Osamah Saad Al‐Saadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Osamah Saad Al‐Saadi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Volkmar Schmidt
Institute for Geophysics University of Münster Münster Germany
2 shared publications - Ahmed Jaddoa Al-Heety
Seismic Processing Center/Oil Exploration Company, Baghdad, Iraq
1 shared publication - Athir J. Al-Inizi
Department of Geology, College of Science, University of Baghdad Baghdad, Iraq
1 shared publication - Bing Zhou
Institute for Chengdu-Chongqing Economic Zone Development, Chongqing Technology and Business University, Chongqing, China
1 shared publication - Fatima Z. Berhi
Department of Geology, College of Science, University of Baghdad , Baghdad Iraq
1 shared publication - Khaled S. Gemail
Environmental Geophysics Lab (ZEGL), Faculty of Science, Geology Department, Zagazig University, Zagazig, Egypt
1 shared publication
Latest Publications
- 21 March 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (4) , 219
Geotechnical heterogeneity assessment using MASW and ERT: a case study from Al Maktoum airport, Dubai, UAE
- 21 March 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (4) , 219
Geotechnical heterogeneity assessment using MASW and ERT: a case study from Al Maktoum airport, Dubai, UAE
- Open Access
- 30 December 2024
- Published by University of Baghdad College of Science in Iraqi Journal of Science
- p. 7036-7048
Archaeological prospecting using the Electric Resistivity Imaging method at the Borsippa site, Near Babylon, Central Iraq
Many important archaeological sites in Iraq still need to be preserved. Some of these sites were subjected to destruction and negligence. So, exploring these sites represents a priority for its protection. A 2D Electrical Resistivity Imaging (ERI) as a non-invasive geophysical survey method was implemented at a part of the Borsippa archaeological site near Babylon to search for the subsurface archaeological artefacts/structures. Electrical resistivity measurements were carried out using a Dipole-Dipole array. Steps were taken to process and filter using Horizontal profiles, forward modelling, and 2D inverse models to analyze the resistivity measurements. The ERI inversion results show that the superficial conductive zone produced variations in ERI inverse models. The low resistivity caused by the relatively high conductivity was observed due to rainwater leaking into the topsoil zone. The ERI sections revealed a coherent depth of approximately 7 meters and the anomalies geometry and semi-layering soil. These changes can be attributed to the high resistivity contrast between the relatively high-resistivity anomalies and the surrounding intact soil. The soil types include dry silty and clayey soils and crushed refractory materials such as broken bricks and ruins mixed with rock pulp. These materials have resulted in the collapse of walls due to weathering and erosion. Based on the identified patterns, shallow-depth high-resistive anomalies are present and extend throughout some parts of the study area. These anomalies are represented in a SW-NE trend of the mound area. At the bottom of this zone is another zone with low resistance values and variable thickness, which varies from place to place within the study area. The results proved the efficiency of the ERI technique in detecting archaeological wall-like artefacts, which represents a data bank for any future archaeological prospection.
- 30 December 2024
- Published by University of Baghdad College of Science in Iraqi Journal of Science
- p. 7036-7048
Open AccessArchaeological prospecting using the Electric Resistivity Imaging method at the Borsippa site, Near Babylon, Central Iraq
Many important archaeological sites in Iraq still need to be preserved. Some of these sites were subjected to destruction and negligence. So, exploring these sites represents a priority for its protection. A 2D Electrical Resistivity Imaging (ERI) as a non-invasive geophysical survey method was implemented at a part of the Borsippa archaeological site near Babylon to search for the subsurface archaeological artefacts/structures. Electrical resistivity measurements were carried out using a Dipole-Dipole array. Steps were taken to process and filter using Horizontal profiles, forward modelling, and 2D inverse models to analyze the resistivity measurements. The ERI inversion results show that the superficial conductive zone produced variations in ERI inverse models. The low resistivity caused by the relatively high conductivity was observed due to rainwater leaking into the topsoil zone. The ERI sections revealed a coherent depth of approximately 7 meters and the anomalies geometry and semi-layering soil. These changes can be attributed to the high resistivity contrast between the relatively high-resistivity anomalies and the surrounding intact soil. The soil types include dry silty and clayey soils and crushed refractory materials such as broken bricks and ruins mixed with rock pulp. These materials have resulted in the collapse of walls due to weathering and erosion. Based on the identified patterns, shallow-depth high-resistive anomalies are present and extend throughout some parts of the study area. These anomalies are represented in a SW-NE trend of the mound area. At the bottom of this zone is another zone with low resistance values and variable thickness, which varies from place to place within the study area. The results proved the efficiency of the ERI technique in detecting archaeological wall-like artefacts, which represents a data bank for any future archaeological prospection.
- Open Access
- 30 November 2024
- Published by University of Baghdad College of Science in Iraqi Journal of Science
- p. 6529-6543
Utilizing the Gravity Method to Detect the Potential Effect of the Salt Dome in the Nahr Omar Oilfield, Southern Iraq
Geophysics is one of the branches of Earth sciences and deals with studying the Earth's interior by studying the variation of physical properties within rock layers. Applied geophysics depends on procedures that involve the measurements of potential fields, such as the gravitational method. One of the significant oil fields in southern Iraq is represented by the Nahr Omar structure. A power spectrum analysis (SPA) technique was used to collect gravity data within the chosen oil field area in order to confirm the salt dome in the subsurface layers. The analysis of SPA resulted from six surfaces representing the gravity variation values of the depths (m)14300, 3780, 3290, 2170, 810, and 93.5. Gravity surfaces have been converted to density surfaces to determine density and velocity models from these six depth slices. The inverted data were consistent with the Nafe and Drake standard curves of converting densities to average velocities. The current study illustrated the benefit/assist of the inversion technique of gravity data to average velocity, to a large extent, in detecting the salt dome effects on the subsurface strata for the Nahr Omar oilfield. In comparison, the decrease in the average velocity of the salt dome area is related to this effect. The acquired inversion results were supported by available seismic data within the Nahr Omar area and utilized the seismic attributes processing technique.
- 30 November 2024
- Published by University of Baghdad College of Science in Iraqi Journal of Science
- p. 6529-6543
Open AccessUtilizing the Gravity Method to Detect the Potential Effect of the Salt Dome in the Nahr Omar Oilfield, Southern Iraq
Geophysics is one of the branches of Earth sciences and deals with studying the Earth's interior by studying the variation of physical properties within rock layers. Applied geophysics depends on procedures that involve the measurements of potential fields, such as the gravitational method. One of the significant oil fields in southern Iraq is represented by the Nahr Omar structure. A power spectrum analysis (SPA) technique was used to collect gravity data within the chosen oil field area in order to confirm the salt dome in the subsurface layers. The analysis of SPA resulted from six surfaces representing the gravity variation values of the depths (m)14300, 3780, 3290, 2170, 810, and 93.5. Gravity surfaces have been converted to density surfaces to determine density and velocity models from these six depth slices. The inverted data were consistent with the Nafe and Drake standard curves of converting densities to average velocities. The current study illustrated the benefit/assist of the inversion technique of gravity data to average velocity, to a large extent, in detecting the salt dome effects on the subsurface strata for the Nahr Omar oilfield. In comparison, the decrease in the average velocity of the salt dome area is related to this effect. The acquired inversion results were supported by available seismic data within the Nahr Omar area and utilized the seismic attributes processing technique.
- Open Access
- 30 March 2022
- Published by University of Baghdad College of Science in Iraqi Journal of Science
- p. 1129-1145
Electro-Facies and Petrophysical Properties of the Hartha Formation in Selected Wells of East Baghdad Oil Field
The Hartha Formation is a major carbonate succession deposited during the Late Campanian period. The current study depends on four selected wells (EB 1, 2, 4 and 30) within the East Baghdad oil field to study electrofacies and petrophysical properties related to the reservoir characterization. The Hartha Formation is divided into three electro-facies units using GR and SP logs in Petrel software. The upper unit of the Hartha Formation is composed mainly of limestone. The middle unit is composing of thick layers of shale. The lower unit is composed mainly of limestone with few shale layers. The three units are divided into three types of rocks in relation to the total porosity: 1. High-moderate active porosity rocks (type I). 2. Moderate active porosity rocks (type II). 3. Low-non pores rocks (type III). The lower unit represents the shale–dominated part of the Hartha Formation, with low to non-pores rocks (type III). This zone is revealed in all studied wells. These are limit presences for the high to moderate active porosity type (I) within the shale bands lithofacies appear in the studied wells. The middle unit is divided into two subzones. The upper part of this zone is characterized by high to moderate active porosity (type I), while the lower one shows moderate active porosity (type II) and low to non-pores rocks (type III) due to the high ratio content of shale. Upper rock-unit is expressed by high-moderate active porosity rocks (type I), which shale content is very low. This porosity type is identified through the upper unit at the East Baghdad oil field. These characteristic features are highly consistent with the low to moderate shale value rock unit.
- 30 March 2022
- Published by University of Baghdad College of Science in Iraqi Journal of Science
- p. 1129-1145
Open AccessElectro-Facies and Petrophysical Properties of the Hartha Formation in Selected Wells of East Baghdad Oil Field
The Hartha Formation is a major carbonate succession deposited during the Late Campanian period. The current study depends on four selected wells (EB 1, 2, 4 and 30) within the East Baghdad oil field to study electrofacies and petrophysical properties related to the reservoir characterization. The Hartha Formation is divided into three electro-facies units using GR and SP logs in Petrel software. The upper unit of the Hartha Formation is composed mainly of limestone. The middle unit is composing of thick layers of shale. The lower unit is composed mainly of limestone with few shale layers. The three units are divided into three types of rocks in relation to the total porosity: 1. High-moderate active porosity rocks (type I). 2. Moderate active porosity rocks (type II). 3. Low-non pores rocks (type III). The lower unit represents the shale–dominated part of the Hartha Formation, with low to non-pores rocks (type III). This zone is revealed in all studied wells. These are limit presences for the high to moderate active porosity type (I) within the shale bands lithofacies appear in the studied wells. The middle unit is divided into two subzones. The upper part of this zone is characterized by high to moderate active porosity (type I), while the lower one shows moderate active porosity (type II) and low to non-pores rocks (type III) due to the high ratio content of shale. Upper rock-unit is expressed by high-moderate active porosity rocks (type I), which shale content is very low. This porosity type is identified through the upper unit at the East Baghdad oil field. These characteristic features are highly consistent with the low to moderate shale value rock unit.
- 17 May 2018
- Published by Wiley in Archaeological Prospection
- Vol. 25 (3) , 209-218
Very‐high‐resolution electrical resistivity imaging of buried foundations of a Roman villa near Nonnweiler, Germany
Electrical resistivity tomography (ERT) methods have been increasingly used in various shallow depth archaeological prospections in the last few decades. These non‐invasive techniques can save time, costs, and efforts in archaeological prospection and yield detailed images of subsurface anomalies. We present the results of quasi‐three‐dimensional (3D) ERT measurements in an area of a presumed Roman construction, using a dense electrode network of parallel and orthogonal profiles in dipole–dipole configuration. A roll‐along technique has been utilized to cover a large part of the archaeological site with a 25 cm electrode and profile spacing, respectively. We have designed a new field procedure, which used an electrode array fixed in a frame. This facilitated a very efficient field operation, and overall a total of 9648 electrode positions were occupied. The 3D ERT inversion results clearly characterize the main structures of the Roman foundations. We compared our high‐resolution 3D electrical resistivity model with findings from archaeological excavations, which have been done in some parts of the surveyed area. The ERT result coincide well with the excavation results, i.e. the location as well as the vertical and horizontal extensions of the structures could be precisely imaged. The ERT results successfully images most parts of the walls, pits and also smaller internal structures of the Roman building; moreover, excavation ditches that had been refilled prior to the ERT survey are delineated as resistivity heterogeneities as well.
- 17 May 2018
- Published by Wiley in Archaeological Prospection
- Vol. 25 (3) , 209-218
Very‐high‐resolution electrical resistivity imaging of buried foundations of a Roman villa near Nonnweiler, Germany
Electrical resistivity tomography (ERT) methods have been increasingly used in various shallow depth archaeological prospections in the last few decades. These non‐invasive techniques can save time, costs, and efforts in archaeological prospection and yield detailed images of subsurface anomalies. We present the results of quasi‐three‐dimensional (3D) ERT measurements in an area of a presumed Roman construction, using a dense electrode network of parallel and orthogonal profiles in dipole–dipole configuration. A roll‐along technique has been utilized to cover a large part of the archaeological site with a 25 cm electrode and profile spacing, respectively. We have designed a new field procedure, which used an electrode array fixed in a frame. This facilitated a very efficient field operation, and overall a total of 9648 electrode positions were occupied. The 3D ERT inversion results clearly characterize the main structures of the Roman foundations. We compared our high‐resolution 3D electrical resistivity model with findings from archaeological excavations, which have been done in some parts of the surveyed area. The ERT result coincide well with the excavation results, i.e. the location as well as the vertical and horizontal extensions of the structures could be precisely imaged. The ERT results successfully images most parts of the walls, pits and also smaller internal structures of the Roman building; moreover, excavation ditches that had been refilled prior to the ERT survey are delineated as resistivity heterogeneities as well.
- 1 January 2018
- Published by EAGE Publications bv
Electrical Resistivity Tomography of Celtic Burial Mounds in Nonnweiler (Germany)
- 1 January 2018
- Published by EAGE Publications bv
Electrical Resistivity Tomography of Celtic Burial Mounds in Nonnweiler (Germany)