Sebastião Cícero Pinheiro Gomes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sebastião Cícero Pinheiro Gomes has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Rodrigues Rocha
Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Sul (IFRS)
2 shared publications Elisane B. Zanela
Universidade Federal do Rio Grande FURG
2 shared publicationsIgor Oliveira Monteiro
Universidade Federal do Rio Grande
2 shared publications- Adriana E. L. Pereira
Universidade Federal do Rio Grande FURG
1 shared publication Adriana E.L. Pereira
Federal University of Rio Grande (FURG), Applied Mathematics and Control Laboratory, Av. Itália, km 8, 96201-900 Rio Grande, RS, Brazil
1 shared publicationE. M. Hemerly
Technological Institute of Aeronautics (ITA), Electronics Division Praça Marechal Eduardo Gomes 50, 12228-900, São José dos Campos, SP, Brazil
1 shared publication
Latest Publications
- 14 August 2020
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 42 (9) , 1-20
Dynamic modeling of cables with external forces applied to the terminal load
- 14 August 2020
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 42 (9) , 1-20
Dynamic modeling of cables with external forces applied to the terminal load
- 30 July 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia Sul-Rio-Grandense in Revista Thema
- Vol. 18 (ESPECIAL) , 1-25
Modelagem dinâmica da COVID-19 com aplicação a algumas cidades brasileiras
A COVID-19 surpreendeu o planeta em razão da velocidade de contaminação. Surgida no final de 2019 em Hubei (China), espalhou-se rapidamente por todos os países. Naturalmente, o interesse em conhecer o comportamento dinâmico dessa pandemia ganhou muito destaque na comunidade científica. Diversos trabalhos têm sido publicados sobre esse tema. Neste sentido, o presente artigo insere-se nesse esforço de tentar compreender melhor a dinâmica de espalhamento da COVID-19. A dificuldade de se estimar parâmetros da dinâmica epidêmica localizada em uma determinada cidade ou região tem sido característica marcante, destacada por diversos autores. Esta característica motivou a utilização de um modelo dinâmico compartimental do tipo SIR (Suscetíveis, Infectados e Removidos), cuja estrutura simples necessita de poucos parâmetros para serem estimados. Entretanto, foram necessárias modificações nessa estrutura simples, de forma a tornar o modelo mais preditivo e capaz de reproduzir dados reais. A principal modificação foi a consideração do percentual de circulação da população no modelo dinâmico, que tem sido utilizado como variável de controle. Este modelo SIR modificado recebeu o nome de MdSIR, para facilitar explicações no texto. Os resultados mostraram que um modelo com estrutura simples e poucos parâmetros reproduziu bem a dinâmica epidêmica em algumas cidades brasileiras.
- 30 July 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia Sul-Rio-Grandense in Revista Thema
- Vol. 18 (ESPECIAL) , 1-25
Modelagem dinâmica da COVID-19 com aplicação a algumas cidades brasileiras
A COVID-19 surpreendeu o planeta em razão da velocidade de contaminação. Surgida no final de 2019 em Hubei (China), espalhou-se rapidamente por todos os países. Naturalmente, o interesse em conhecer o comportamento dinâmico dessa pandemia ganhou muito destaque na comunidade científica. Diversos trabalhos têm sido publicados sobre esse tema. Neste sentido, o presente artigo insere-se nesse esforço de tentar compreender melhor a dinâmica de espalhamento da COVID-19. A dificuldade de se estimar parâmetros da dinâmica epidêmica localizada em uma determinada cidade ou região tem sido característica marcante, destacada por diversos autores. Esta característica motivou a utilização de um modelo dinâmico compartimental do tipo SIR (Suscetíveis, Infectados e Removidos), cuja estrutura simples necessita de poucos parâmetros para serem estimados. Entretanto, foram necessárias modificações nessa estrutura simples, de forma a tornar o modelo mais preditivo e capaz de reproduzir dados reais. A principal modificação foi a consideração do percentual de circulação da população no modelo dinâmico, que tem sido utilizado como variável de controle. Este modelo SIR modificado recebeu o nome de MdSIR, para facilitar explicações no texto. Os resultados mostraram que um modelo com estrutura simples e poucos parâmetros reproduziu bem a dinâmica epidêmica em algumas cidades brasileiras.
- Open Access
- 30 July 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia Sul-Rio-Grandense in Revista Thema
- Vol. 18 (ESPECIAL) , 26-53
Identificação de parâmetros na modelagem dinâmica da COVID-19
O presente artigo aborda a identificação paramétrica em um modelo dinâmico da epidemia por COVID-19, localizada em uma determinada cidade ou região. O modelo dinâmico utilizado é uma adaptação do SIR (Suscetíveis, Infectados, Recuperados), que recebeu o nome MdSIR, adaptação esta específica para reproduzir dinamicamente a COVID-19. Foram identificados três parâmetros que variam ao longo do tempo: o índice de reprodução basal; a taxa de quarentena de infectados; o percentual de circulação. Utilizou-se o método de Nelder-Mead Simplex na identificação paramétrica. O procedimento de identificação paramétrica foi utilizado considerando-se os dados reais de diversas cidades brasileiras. Simulações realizadas para essas cidades mostraram que o modelo cujos parâmetros variam ao longo do tempo reproduziu muito bem os dados reais.
- 30 July 2020
- Published by Instituto Federal de Educacao, Ciencia e Tecnologia Sul-Rio-Grandense in Revista Thema
- Vol. 18 (ESPECIAL) , 26-53
Open AccessIdentificação de parâmetros na modelagem dinâmica da COVID-19
O presente artigo aborda a identificação paramétrica em um modelo dinâmico da epidemia por COVID-19, localizada em uma determinada cidade ou região. O modelo dinâmico utilizado é uma adaptação do SIR (Suscetíveis, Infectados, Recuperados), que recebeu o nome MdSIR, adaptação esta específica para reproduzir dinamicamente a COVID-19. Foram identificados três parâmetros que variam ao longo do tempo: o índice de reprodução basal; a taxa de quarentena de infectados; o percentual de circulação. Utilizou-se o método de Nelder-Mead Simplex na identificação paramétrica. O procedimento de identificação paramétrica foi utilizado considerando-se os dados reais de diversas cidades brasileiras. Simulações realizadas para essas cidades mostraram que o modelo cujos parâmetros variam ao longo do tempo reproduziu muito bem os dados reais.
- 19 July 2018
- Published by Springer Nature
- p. 125-139
Cable Dynamic Modeling and Applications in Three-Dimensional Space
- 19 July 2018
- Published by Springer Nature
- p. 125-139
Cable Dynamic Modeling and Applications in Three-Dimensional Space
- Open Access
- 23 May 2017
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 39 (2) , 390-401
GERAÇÃO AUTOMÁTICA DE MODELOS DINÂMICOS DE CABOS
Dynamic modeling of cables is a research theme of great importance and practical application nowadays in the underwater oil industry. However, due to non-linearity behavior present on cable dynamics, as well as the need to work with many degrees of freedom, to develop dynamic models for these systems becomes a hard task. To develop dynamic models of cables, in this article is proposed a discrete formalism, which supposes the cable consisting of rigid links connected by fictitious elastic joints. The cables were considered with one of its endings articulated to a floating structure (ship or platform), while on the other ending were considered two cases: one free terminal loading; ending fixed to the ground. The cables are submersed and the hydrodynamic drag was considered from a simple model, proportional to the square of the relative velocity between the structure and the fluid. Using the Euler-Lagrange formalism, the dynamic models for cables considering two, three and four links were developed. From these models algorithms have been developed to automatically generate dynamic models for any number of links to represent in a discrete form the cable’s continuous flexibility. Simulations were performed, which showed the results agreeing qualitatively with the physical expected. A software has been developed to display animation from the spatial configuration of the cable. This animation, based on data from numerical simulation, allowed us show that the developed dynamic models give a great sense of physical reality.
- 23 May 2017
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 39 (2) , 390-401
Open AccessGERAÇÃO AUTOMÁTICA DE MODELOS DINÂMICOS DE CABOS
Dynamic modeling of cables is a research theme of great importance and practical application nowadays in the underwater oil industry. However, due to non-linearity behavior present on cable dynamics, as well as the need to work with many degrees of freedom, to develop dynamic models for these systems becomes a hard task. To develop dynamic models of cables, in this article is proposed a discrete formalism, which supposes the cable consisting of rigid links connected by fictitious elastic joints. The cables were considered with one of its endings articulated to a floating structure (ship or platform), while on the other ending were considered two cases: one free terminal loading; ending fixed to the ground. The cables are submersed and the hydrodynamic drag was considered from a simple model, proportional to the square of the relative velocity between the structure and the fluid. Using the Euler-Lagrange formalism, the dynamic models for cables considering two, three and four links were developed. From these models algorithms have been developed to automatically generate dynamic models for any number of links to represent in a discrete form the cable’s continuous flexibility. Simulations were performed, which showed the results agreeing qualitatively with the physical expected. A software has been developed to display animation from the spatial configuration of the cable. This animation, based on data from numerical simulation, allowed us show that the developed dynamic models give a great sense of physical reality.
- 1 July 2016
- Published by Elsevier in Ocean Engineering
- Vol. 121, 559-571
Automatic generation of dynamic models of cables
- 1 July 2016
- Published by Elsevier in Ocean Engineering
- Vol. 121, 559-571
Automatic generation of dynamic models of cables
- 31 August 2015
- Published by Associacao Sergipana de Ciencia in Scientia Plena
- Vol. 11 (8) , 10
Modelagem dinâmica de cabos para aplicações subaquáticas
A modelagem dinâmica de cabos constitui tema de pesquisa de grande importância e aplicação prática na atualidade. No entanto, devido às não linearidades presentes na dinâmica de cabos, bem como à necessidade de se trabalhar com muitos graus de liberdade, desenvolver modelos dinâmicos para estes sistemas torna-se tarefa difícil. Para desenvolver modelos dinâmicos de cabos, o presente artigo utiliza o Método do Formalismo Discreto (Lumped Mass Approach), que supõe o cabo dividido em elos rígidos conectados por articulações elásticas fictícias. Os cabos foram considerados com uma das extremidades articulada a uma estrutura flutuante (navio ou plataforma), enquanto que em sua outra extremidade consideraram-se dois casos: uma carga terminal livre; extremidade fixa a Terra. Os cabos estão submersos e o arrasto hidrodinâmico foi considerado a partir de um modelo simples, proporcional ao quadrado da velocidade. Utilizando-se o formalismo de Euler-Lagrange, foram desenvolvidos os modelos dinâmicos para cabos considerando-se dois, três e quatro elos. Uma vez obtidos estes modelos, foram realizadas simulações, as quais mostraram resultados qualitativamente de acordo com o esperado fisicamente.
- 31 August 2015
- Published by Associacao Sergipana de Ciencia in Scientia Plena
- Vol. 11 (8) , 10
Modelagem dinâmica de cabos para aplicações subaquáticas
A modelagem dinâmica de cabos constitui tema de pesquisa de grande importância e aplicação prática na atualidade. No entanto, devido às não linearidades presentes na dinâmica de cabos, bem como à necessidade de se trabalhar com muitos graus de liberdade, desenvolver modelos dinâmicos para estes sistemas torna-se tarefa difícil. Para desenvolver modelos dinâmicos de cabos, o presente artigo utiliza o Método do Formalismo Discreto (Lumped Mass Approach), que supõe o cabo dividido em elos rígidos conectados por articulações elásticas fictícias. Os cabos foram considerados com uma das extremidades articulada a uma estrutura flutuante (navio ou plataforma), enquanto que em sua outra extremidade consideraram-se dois casos: uma carga terminal livre; extremidade fixa a Terra. Os cabos estão submersos e o arrasto hidrodinâmico foi considerado a partir de um modelo simples, proporcional ao quadrado da velocidade. Utilizando-se o formalismo de Euler-Lagrange, foram desenvolvidos os modelos dinâmicos para cabos considerando-se dois, três e quatro elos. Uma vez obtidos estes modelos, foram realizadas simulações, as quais mostraram resultados qualitativamente de acordo com o esperado fisicamente.
- 1 January 2015
- Published by SWGE Sistemas Ltda
Automatic Generation of Dynamic Models of Cables to Underwater Applications
- 1 January 2015
- Published by SWGE Sistemas Ltda
Automatic Generation of Dynamic Models of Cables to Underwater Applications
- 1 March 2013
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 31 (8) , 1275-1283
Active control of flexible one-link manipulators using wavelet networks
SUMMARY The design of control laws for flexible manipulators is known to be a challenging problem, when using a conventional actuator, i.e., a motor with gear. This is due to the friction of the nonlinear actuator, which causes torque dead zone and stick-slip behavior, thereby hampering the good performance of the control system. The torque needed to attenuate the vibrations, although calculated by the control law, is consumed by the friction inside the actuator, rendering it ineffective to the flexible structure control. Nonlinear friction varies with different operational conditions of the actuator and a friction compensation mechanism based on these models cannot always keep a good performance. This study proposes a new control strategy using wavelet network to friction compensation. Experimental results obtained with a flexible manipulator attest to the good performance of the proposed control law.
- 1 March 2013
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 31 (8) , 1275-1283
Active control of flexible one-link manipulators using wavelet networks
SUMMARY The design of control laws for flexible manipulators is known to be a challenging problem, when using a conventional actuator, i.e., a motor with gear. This is due to the friction of the nonlinear actuator, which causes torque dead zone and stick-slip behavior, thereby hampering the good performance of the control system. The torque needed to attenuate the vibrations, although calculated by the control law, is consumed by the friction inside the actuator, rendering it ineffective to the flexible structure control. Nonlinear friction varies with different operational conditions of the actuator and a friction compensation mechanism based on these models cannot always keep a good performance. This study proposes a new control strategy using wavelet network to friction compensation. Experimental results obtained with a flexible manipulator attest to the good performance of the proposed control law.
- Open Access
- 1 February 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 45-48
A hardware DC motor emulator
Much work have been done lately to develop complex motor control systems. However they always rely on a physical drive/motor/encoder setup for experimental results. This paper presents a hardware DC motor emulator that can be synthesized to FPGAs. The emulator is intended to replace an actual DC motor during the development phase of motor controllers. A torque based input is required and incremental encoder output is provided, so this model can replace both the DC motor, and its power driver without modifications to the motor control system. The proposed emulator is able to reach a clock frequency of hundreds of megahertz and uses very few logic resources in current FPGA technologies. The hardware can be parameterized at synthesis time to make the model suitable for specific needs.
- 1 February 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 45-48
Open AccessA hardware DC motor emulator
Much work have been done lately to develop complex motor control systems. However they always rely on a physical drive/motor/encoder setup for experimental results. This paper presents a hardware DC motor emulator that can be synthesized to FPGAs. The emulator is intended to replace an actual DC motor during the development phase of motor controllers. A torque based input is required and incremental encoder output is provided, so this model can replace both the DC motor, and its power driver without modifications to the motor control system. The proposed emulator is able to reach a clock frequency of hundreds of megahertz and uses very few logic resources in current FPGA technologies. The hardware can be parameterized at synthesis time to make the model suitable for specific needs.