Marco Alberto Carlo Potenza
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marco Alberto Carlo Potenza has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Llorenç Cremonesi
University of Milano-Bicocca
15 shared publications - Mirko Siano
Sezione di Milano
13 shared publications - Bruno Paroli
Dipartimento di Fisica, Università di Milano, I-20133 Milan, Italy
11 shared publications - Alberto Pullia
INFN sezione di Milano
7 shared publications - Luca Teruzzi
Department of Physics, University of Milan, Milan, 20133, Italy
7 shared publications Barbara Delmonte
DISAT, Department of Earth and Environmental Sciences, University Milano-Bicocca, Milan, Italy
6 shared publications
Latest Publications
- Open Access
- 21 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Erratum to: Future Circular Collider Feasibility Study Report
- 21 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Open AccessErratum to: Future Circular Collider Feasibility Study Report
- Open Access
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
A novel correction methodology for measured solar spectra
The solar spectrum, comprising a broad range of electromagnetic radiation from the Sun, is vital for numerous natural processes on Earth, including plant photosynthesis, weather patterns, and climate regulation. It serves as a renewable energy source for human use. In photovoltaics, energy conversion relies not just on the total irradiance received by solar cells, but also on the spectral distribution of incoming light. Accurate spectral correction for advanced photovoltaic technologies is essential for assessing the nominal power of these devices and calibrating irradiance sensors. Spectral distributions are measured using spectroradiometers, which are typically calibrated with Quartz-Tungsten-Halogen (QTH) standard lamps due to their operational ease and cost-effectiveness. However, the spectral distribution of QTH lamps differs significantly from natural sunlight, making periodic performance assessments of spectroradiometers crucial for reliable results. During the 2023 edition of the International Spectroradiometers Intercomparison (ISRC), nine various spectroradiometers were evaluated against references from the European Solar Test Installation (ESTI) laboratories. Among the spectra recorded under natural sunlight during the campaign, those captured in clear sky conditions were deemed suitable for further analysis. This paper presents two functions, R10(λ) and R10*(λ), designed to improve the quality of the acquired spectra and correct calibration-related errors during post-processing. The methodology's effectiveness was assessed using Root Mean Square Error (RMSE) and spectral mismatch factor (MMF), demonstrating a substantial enhancement in the quality of the measured spectra across all cases.
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA novel correction methodology for measured solar spectra
The solar spectrum, comprising a broad range of electromagnetic radiation from the Sun, is vital for numerous natural processes on Earth, including plant photosynthesis, weather patterns, and climate regulation. It serves as a renewable energy source for human use. In photovoltaics, energy conversion relies not just on the total irradiance received by solar cells, but also on the spectral distribution of incoming light. Accurate spectral correction for advanced photovoltaic technologies is essential for assessing the nominal power of these devices and calibrating irradiance sensors. Spectral distributions are measured using spectroradiometers, which are typically calibrated with Quartz-Tungsten-Halogen (QTH) standard lamps due to their operational ease and cost-effectiveness. However, the spectral distribution of QTH lamps differs significantly from natural sunlight, making periodic performance assessments of spectroradiometers crucial for reliable results. During the 2023 edition of the International Spectroradiometers Intercomparison (ISRC), nine various spectroradiometers were evaluated against references from the European Solar Test Installation (ESTI) laboratories. Among the spectra recorded under natural sunlight during the campaign, those captured in clear sky conditions were deemed suitable for further analysis. This paper presents two functions, R10(λ) and R10*(λ), designed to improve the quality of the acquired spectra and correct calibration-related errors during post-processing. The methodology's effectiveness was assessed using Root Mean Square Error (RMSE) and spectral mismatch factor (MMF), demonstrating a substantial enhancement in the quality of the measured spectra across all cases.
- Open Access
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
A novel correction methodology for measured solar spectra
The solar spectrum, comprising a broad range of electromagnetic radiation from the Sun, is vital for numerous natural processes on Earth, including plant photosynthesis, weather patterns, and climate regulation. It serves as a renewable energy source for human use. In photovoltaics, energy conversion relies not just on the total irradiance received by solar cells, but also on the spectral distribution of incoming light. Accurate spectral correction for advanced photovoltaic technologies is essential for assessing the nominal power of these devices and calibrating irradiance sensors. Spectral distributions are measured using spectroradiometers, which are typically calibrated with Quartz-Tungsten-Halogen (QTH) standard lamps due to their operational ease and cost-effectiveness. However, the spectral distribution of QTH lamps differs significantly from natural sunlight, making periodic performance assessments of spectroradiometers crucial for reliable results. During the 2023 edition of the International Spectroradiometers Intercomparison (ISRC), nine various spectroradiometers were evaluated against references from the European Solar Test Installation (ESTI) laboratories. Among the spectra recorded under natural sunlight during the campaign, those captured in clear sky conditions were deemed suitable for further analysis. This paper presents two functions, R10(λ) and R10*(λ), designed to improve the quality of the acquired spectra and correct calibration-related errors during post-processing. The methodology's effectiveness was assessed using Root Mean Square Error (RMSE) and spectral mismatch factor (MMF), demonstrating a substantial enhancement in the quality of the measured spectra across all cases.
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA novel correction methodology for measured solar spectra
The solar spectrum, comprising a broad range of electromagnetic radiation from the Sun, is vital for numerous natural processes on Earth, including plant photosynthesis, weather patterns, and climate regulation. It serves as a renewable energy source for human use. In photovoltaics, energy conversion relies not just on the total irradiance received by solar cells, but also on the spectral distribution of incoming light. Accurate spectral correction for advanced photovoltaic technologies is essential for assessing the nominal power of these devices and calibrating irradiance sensors. Spectral distributions are measured using spectroradiometers, which are typically calibrated with Quartz-Tungsten-Halogen (QTH) standard lamps due to their operational ease and cost-effectiveness. However, the spectral distribution of QTH lamps differs significantly from natural sunlight, making periodic performance assessments of spectroradiometers crucial for reliable results. During the 2023 edition of the International Spectroradiometers Intercomparison (ISRC), nine various spectroradiometers were evaluated against references from the European Solar Test Installation (ESTI) laboratories. Among the spectra recorded under natural sunlight during the campaign, those captured in clear sky conditions were deemed suitable for further analysis. This paper presents two functions, R10(λ) and R10*(λ), designed to improve the quality of the acquired spectra and correct calibration-related errors during post-processing. The methodology's effectiveness was assessed using Root Mean Square Error (RMSE) and spectral mismatch factor (MMF), demonstrating a substantial enhancement in the quality of the measured spectra across all cases.
- Top Cited PapersOpen Access
- 24 December 2025
- Published by Springer Nature in The European Physical Journal C
- Vol. 85 (12)
Future Circular Collider Feasibility Study Report
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
- 24 December 2025
- Published by Springer Nature in The European Physical Journal C
- Vol. 85 (12)
Top Cited PapersOpen AccessFuture Circular Collider Feasibility Study Report
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
- Open Access
- 19 December 2025
- Published by IOP Publishing in Journal of Optics
- Vol. 28 (1) , 015602
Measuring spatial coherence of quantum and classical light with an ultrastable monolithic interferometer
We describe a monolithic interferometer for spatial coherence measurements of both classical and quantum light sources. The design enables measurements on both a PDC-based quantum source and a classical thermal source, using two identical calcite crystals to control beam alignment via birefringence. The monolithic structure ensures inherent stability. Spatial coherence is measured through temporal interferograms and spectral analysis, with both methods showing close agreement with theoretical predictions. The system is robust and performs reliably for both quantum and classical light. Its design enables automated, rapid coherence measurements across different source types.
- 19 December 2025
- Published by IOP Publishing in Journal of Optics
- Vol. 28 (1) , 015602
Open AccessMeasuring spatial coherence of quantum and classical light with an ultrastable monolithic interferometer
We describe a monolithic interferometer for spatial coherence measurements of both classical and quantum light sources. The design enables measurements on both a PDC-based quantum source and a classical thermal source, using two identical calcite crystals to control beam alignment via birefringence. The monolithic structure ensures inherent stability. Spatial coherence is measured through temporal interferograms and spectral analysis, with both methods showing close agreement with theoretical predictions. The system is robust and performs reliably for both quantum and classical light. Its design enables automated, rapid coherence measurements across different source types.
- Open Access
- 13 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 39793
Monitoring optical properties of atmospheric aerosols at dome C, East Antarctic Plateau, provides insights into radiative transfer estimates
Examining the composition of aerosols in Antarctic ice cores can provide insights into past atmospheric circulation. However, interpreting this data requires an understanding of the characteristics and variability of present-day aerosols over time. In 2019, we performed the first year-round, multiparametric optical characterisation of atmospheric aerosols at Concordia Station in East Antarctica using OPTAIR, a novel instrument based on the Single Particle Extinction and Scattering (SPES) technique. We compared this data with the chemical composition of PM10 samples collected at the site and with meteorological data. We also compared it with synchronous data from a LIDAR and a ceilometer operating at Concordia Station. Significant temporal irregularities were observed in the atmospheric aerosol load, with more than one-third of the particles being dry-deposited during brief air mass subsidence events (‘spikes’), which mainly occurred in winter. The aerosol particles detected during these events were primarily composed of sea salt. Their optical properties differ significantly depending on whether they originate from frost flowers or the open ocean. Due to the intermittent nature of aerosol advection to Antarctica and its radiative effect, we estimate that glaciological, time-integrated samples may lead to an overestimation of light extinction by a factor of 3.5 or more.
- 13 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 39793
Open AccessMonitoring optical properties of atmospheric aerosols at dome C, East Antarctic Plateau, provides insights into radiative transfer estimates
Examining the composition of aerosols in Antarctic ice cores can provide insights into past atmospheric circulation. However, interpreting this data requires an understanding of the characteristics and variability of present-day aerosols over time. In 2019, we performed the first year-round, multiparametric optical characterisation of atmospheric aerosols at Concordia Station in East Antarctica using OPTAIR, a novel instrument based on the Single Particle Extinction and Scattering (SPES) technique. We compared this data with the chemical composition of PM10 samples collected at the site and with meteorological data. We also compared it with synchronous data from a LIDAR and a ceilometer operating at Concordia Station. Significant temporal irregularities were observed in the atmospheric aerosol load, with more than one-third of the particles being dry-deposited during brief air mass subsidence events (‘spikes’), which mainly occurred in winter. The aerosol particles detected during these events were primarily composed of sea salt. Their optical properties differ significantly depending on whether they originate from frost flowers or the open ocean. Due to the intermittent nature of aerosol advection to Antarctica and its radiative effect, we estimate that glaciological, time-integrated samples may lead to an overestimation of light extinction by a factor of 3.5 or more.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Optical characterisation of mineral dust in polar ice: towards an improved understanding of climate-regulating processes
Polar ice cores represent a unique and invaluable archive, offering an exceptional resource for enhancing our understanding of the atmospheric composition over time and its aerosol content. These cores preserve, over millennia, crucial information such as air bubbles, solid particles trapped in ice, as well as isotopes, heavy metals, and radioactive elements. Among the various paleoclimatic proxies, mineral dust is widely recognized as a key component of the climate system, strongly linked to the glacial-interglacial climate oscillations of the Quaternary period. Nevertheless, its impact on the radiative balance of the planet system remains to be fully quantified, primarily due to the considerable variations in its optical properties that occur over both space and time. In this context, laser-sensing instruments emerge as a versatile and non-destructive tool suitable for in-line characterisation of particle radiative properties. In this work, we present an optical technique which provides two optical parameters, namely the extinction cross-section and the polarizability, of each particle passing through a focused laser beam under continuous forced flow, called Single Particle Extinction and Scattering (SPES). This method, developed by the Instrumental Optics of the Physics Department of the University of Milan, is based on the far-field, self-reference interference between the zero-angle field scattered by each nano- or microparticle and the more intense field transmitted through the sample. This analysis has been applied to the EPICA ice core drilled at Dome C, East Antarctica, with depth range from about 200 to 2900 m. In deeper sections, where growth and recrystallisation of ice grains might cause relocation of impurities, particular attention has been directed towards the identification of dust aggregates, which have the potential to alter the original paleoclimate signal. Preliminary results and insight on the SPES method will be presented.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessOptical characterisation of mineral dust in polar ice: towards an improved understanding of climate-regulating processes
Polar ice cores represent a unique and invaluable archive, offering an exceptional resource for enhancing our understanding of the atmospheric composition over time and its aerosol content. These cores preserve, over millennia, crucial information such as air bubbles, solid particles trapped in ice, as well as isotopes, heavy metals, and radioactive elements. Among the various paleoclimatic proxies, mineral dust is widely recognized as a key component of the climate system, strongly linked to the glacial-interglacial climate oscillations of the Quaternary period. Nevertheless, its impact on the radiative balance of the planet system remains to be fully quantified, primarily due to the considerable variations in its optical properties that occur over both space and time. In this context, laser-sensing instruments emerge as a versatile and non-destructive tool suitable for in-line characterisation of particle radiative properties. In this work, we present an optical technique which provides two optical parameters, namely the extinction cross-section and the polarizability, of each particle passing through a focused laser beam under continuous forced flow, called Single Particle Extinction and Scattering (SPES). This method, developed by the Instrumental Optics of the Physics Department of the University of Milan, is based on the far-field, self-reference interference between the zero-angle field scattered by each nano- or microparticle and the more intense field transmitted through the sample. This analysis has been applied to the EPICA ice core drilled at Dome C, East Antarctica, with depth range from about 200 to 2900 m. In deeper sections, where growth and recrystallisation of ice grains might cause relocation of impurities, particular attention has been directed towards the identification of dust aggregates, which have the potential to alter the original paleoclimate signal. Preliminary results and insight on the SPES method will be presented.
- Open Access
- 19 October 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-30
Comment on egusphere-2024-2057
Sunlight penetration in the snowpack plays a fundamental role in many environmental processes, including the local radiative energy balance, snow hydrology and snow microbiology and can potentially contribute to climate change. In addition, many photochemical reactions typically occur in the snowpack driven by solar radiation. Although a few measurements have been attempted in the past decades with several approaches, light penetration through the snowpack is currently almost only modelled numerically, frequently using severe assumptions and several parameters not always easy to be fixed. The lack of experimental data and dedicated studies leave a remarkable scientific gap in the snow research. In this paper, we propose a novel sensor, specifically designed and custom-made, to assess sunlight propagation through the snowpack in three different spectral bands. The probe has been designed to be very compact and lightweight and therefore easily transportable. We measure at different depths in the snowpack the scattered light propagating horizontally with respect to the surface with high spatial resolution (3 mm). Measurements were performed over the past two years across multiple sites with different altitudes and geographic exposure, different illumination conditions and snowpack characteristics. Data are compared to numerical simulations from the “Snow, Ice and Aerosol Radiative” (SNICAR) code, exploited here to extract the information about the light propagation at different depths. This approach provides important constraints to properly model the snowpack characteristics, allowing us to extrapolate this information to the UV radiation range. Nevertheless, in some cases the comparison between our measurement and model run suggest a more complex light penetration depending on the snowpack peculiar characteristics that SNICAR numerical simulations cannot capture. We believe that our tight experimental approach will strongly contribute to a better understanding of the radiative transfer process inside the snow layers, as well as to a quantitative description of all those chemical, physical and biological processes that occur in the uppermost layers of the snowpack.
- 19 October 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-30
Open AccessComment on egusphere-2024-2057
Sunlight penetration in the snowpack plays a fundamental role in many environmental processes, including the local radiative energy balance, snow hydrology and snow microbiology and can potentially contribute to climate change. In addition, many photochemical reactions typically occur in the snowpack driven by solar radiation. Although a few measurements have been attempted in the past decades with several approaches, light penetration through the snowpack is currently almost only modelled numerically, frequently using severe assumptions and several parameters not always easy to be fixed. The lack of experimental data and dedicated studies leave a remarkable scientific gap in the snow research. In this paper, we propose a novel sensor, specifically designed and custom-made, to assess sunlight propagation through the snowpack in three different spectral bands. The probe has been designed to be very compact and lightweight and therefore easily transportable. We measure at different depths in the snowpack the scattered light propagating horizontally with respect to the surface with high spatial resolution (3 mm). Measurements were performed over the past two years across multiple sites with different altitudes and geographic exposure, different illumination conditions and snowpack characteristics. Data are compared to numerical simulations from the “Snow, Ice and Aerosol Radiative” (SNICAR) code, exploited here to extract the information about the light propagation at different depths. This approach provides important constraints to properly model the snowpack characteristics, allowing us to extrapolate this information to the UV radiation range. Nevertheless, in some cases the comparison between our measurement and model run suggest a more complex light penetration depending on the snowpack peculiar characteristics that SNICAR numerical simulations cannot capture. We believe that our tight experimental approach will strongly contribute to a better understanding of the radiative transfer process inside the snow layers, as well as to a quantitative description of all those chemical, physical and biological processes that occur in the uppermost layers of the snowpack.
- 1 October 2024
- Published by American Physical Society (APS) in Physical Review A
- Vol. 110 (4)
Local discrimination of orbital angular momentum in entangled states
- 1 October 2024
- Published by American Physical Society (APS) in Physical Review A
- Vol. 110 (4)
Local discrimination of orbital angular momentum in entangled states
- Open Access
- 30 September 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-30
Comment on egusphere-2024-2057
Sunlight penetration in the snowpack plays a fundamental role in many environmental processes, including the local radiative energy balance, snow hydrology and snow microbiology and can potentially contribute to climate change. In addition, many photochemical reactions typically occur in the snowpack driven by solar radiation. Although a few measurements have been attempted in the past decades with several approaches, light penetration through the snowpack is currently almost only modelled numerically, frequently using severe assumptions and several parameters not always easy to be fixed. The lack of experimental data and dedicated studies leave a remarkable scientific gap in the snow research. In this paper, we propose a novel sensor, specifically designed and custom-made, to assess sunlight propagation through the snowpack in three different spectral bands. The probe has been designed to be very compact and lightweight and therefore easily transportable. We measure at different depths in the snowpack the scattered light propagating horizontally with respect to the surface with high spatial resolution (3 mm). Measurements were performed over the past two years across multiple sites with different altitudes and geographic exposure, different illumination conditions and snowpack characteristics. Data are compared to numerical simulations from the “Snow, Ice and Aerosol Radiative” (SNICAR) code, exploited here to extract the information about the light propagation at different depths. This approach provides important constraints to properly model the snowpack characteristics, allowing us to extrapolate this information to the UV radiation range. Nevertheless, in some cases the comparison between our measurement and model run suggest a more complex light penetration depending on the snowpack peculiar characteristics that SNICAR numerical simulations cannot capture. We believe that our tight experimental approach will strongly contribute to a better understanding of the radiative transfer process inside the snow layers, as well as to a quantitative description of all those chemical, physical and biological processes that occur in the uppermost layers of the snowpack.
- 30 September 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-30
Open AccessComment on egusphere-2024-2057
Sunlight penetration in the snowpack plays a fundamental role in many environmental processes, including the local radiative energy balance, snow hydrology and snow microbiology and can potentially contribute to climate change. In addition, many photochemical reactions typically occur in the snowpack driven by solar radiation. Although a few measurements have been attempted in the past decades with several approaches, light penetration through the snowpack is currently almost only modelled numerically, frequently using severe assumptions and several parameters not always easy to be fixed. The lack of experimental data and dedicated studies leave a remarkable scientific gap in the snow research. In this paper, we propose a novel sensor, specifically designed and custom-made, to assess sunlight propagation through the snowpack in three different spectral bands. The probe has been designed to be very compact and lightweight and therefore easily transportable. We measure at different depths in the snowpack the scattered light propagating horizontally with respect to the surface with high spatial resolution (3 mm). Measurements were performed over the past two years across multiple sites with different altitudes and geographic exposure, different illumination conditions and snowpack characteristics. Data are compared to numerical simulations from the “Snow, Ice and Aerosol Radiative” (SNICAR) code, exploited here to extract the information about the light propagation at different depths. This approach provides important constraints to properly model the snowpack characteristics, allowing us to extrapolate this information to the UV radiation range. Nevertheless, in some cases the comparison between our measurement and model run suggest a more complex light penetration depending on the snowpack peculiar characteristics that SNICAR numerical simulations cannot capture. We believe that our tight experimental approach will strongly contribute to a better understanding of the radiative transfer process inside the snow layers, as well as to a quantitative description of all those chemical, physical and biological processes that occur in the uppermost layers of the snowpack.