Qi Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qi Zhu has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
Zhenzi Li
Department of Epidemiology and Biostatistics, Harbin Medical University, Harbin 150086, P. R. China
13 shared publications- Zipeng Xing
Department of Environmental Science, School of Chemistry and Materials Science, Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, Heilongjiang University, Harbin 150080, PR China
12 shared publications - Wei Zhou
Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, Shandong 250353, PR China
11 shared publications - Zipeng Xing
School of Chemistry and Materials Science, Heilongjiang University, Key Laboratory of Chemical Engineering Process & Technology for High-efficiency Conversion, Harbin, 150080, China
11 shared publications Aiwen Wang
School of Environment, Harbin Institute of Technology, Harbin, 150090, China
8 shared publicationsJunwei Yin
8 shared publications
Latest Publications
- 27 October 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (6)
Adsorptive separation of PET nanoplastics from water by biochar-supported ZnAl layered double oxide composite
- 27 October 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (6)
Adsorptive separation of PET nanoplastics from water by biochar-supported ZnAl layered double oxide composite
- Open Access
- 29 June 2026
- Published by Elsevier in SSRN Electronic Journal
Selective capture of PET nanoplastics by ZnAl-LDO@UBC through Lewis acid-base interactions and hydrogen bonding
Polyethylene terephthalate nanoplastics (PET NPs) are persistent aquatic contaminants whose small size and colloidal stability challenge conventional separation. Here, urea-modified biochar (UBC)-supported ZnAl-layered double oxide (ZnAl-LDO@UBC) is developed for the adsorptive removal of PET NPs from water. The composite integrates dispersed metal oxide nanosheets with a hierarchical biochar framework, increasing the surface area and introducing Zn/Al-related interfacial sites. ZnAl-LDO@UBC shows rapid PET uptake and reaches an experimental adsorption capacity of 476.41 mg g-1, which is 2.0, 2.3, and 3.5 times that of the corresponding layered double hydroxide composite, UBC, and unmodified biochar, respectively. Thermodynamic analysis indicates that PET adsorption is spontaneous and endothermic. The adsorbent maintains high capacity across pH 3-9 and in tap water, while carbonate, phosphate, and river-water constituents suppress adsorption. In binary PET/polystyrene systems, PET adsorption remains dominant, indicating preferential PET capture. After five adsorption-thermal regeneration cycles, PET removal retains 89.0% of its initial efficiency, with decreasing Zn/Al leaching. Post-adsorption characterization reveals layered-oxide reconstruction and interfacial electron redistribution, supporting a mechanism involving electrostatic attraction, Lewis acid-base interactions, and hydrogen bonding. This work demonstrates a biomass-derived layered double oxide composite adsorbent for efficient and selective PET nanoplastic removal.
- 29 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSelective capture of PET nanoplastics by ZnAl-LDO@UBC through Lewis acid-base interactions and hydrogen bonding
Polyethylene terephthalate nanoplastics (PET NPs) are persistent aquatic contaminants whose small size and colloidal stability challenge conventional separation. Here, urea-modified biochar (UBC)-supported ZnAl-layered double oxide (ZnAl-LDO@UBC) is developed for the adsorptive removal of PET NPs from water. The composite integrates dispersed metal oxide nanosheets with a hierarchical biochar framework, increasing the surface area and introducing Zn/Al-related interfacial sites. ZnAl-LDO@UBC shows rapid PET uptake and reaches an experimental adsorption capacity of 476.41 mg g-1, which is 2.0, 2.3, and 3.5 times that of the corresponding layered double hydroxide composite, UBC, and unmodified biochar, respectively. Thermodynamic analysis indicates that PET adsorption is spontaneous and endothermic. The adsorbent maintains high capacity across pH 3-9 and in tap water, while carbonate, phosphate, and river-water constituents suppress adsorption. In binary PET/polystyrene systems, PET adsorption remains dominant, indicating preferential PET capture. After five adsorption-thermal regeneration cycles, PET removal retains 89.0% of its initial efficiency, with decreasing Zn/Al leaching. Post-adsorption characterization reveals layered-oxide reconstruction and interfacial electron redistribution, supporting a mechanism involving electrostatic attraction, Lewis acid-base interactions, and hydrogen bonding. This work demonstrates a biomass-derived layered double oxide composite adsorbent for efficient and selective PET nanoplastic removal.
- 26 February 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (2)
Biochar-composite methyl cellulose-coated slow-release materials for amelioration of soda saline soils
- 26 February 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (2)
Biochar-composite methyl cellulose-coated slow-release materials for amelioration of soda saline soils
- 24 January 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (7) , 2759-2771
Adsorption of ammonium nitrogen in water by modified bentonite compounded with carboxymethyl-β-cyclodextrin
The present study investigates the potential for adsorption of ammonia nitrogen by carboxymethyl-β-cyclodextrin (CMCD) composite acidified calcined bentonite (bent)/SiO2. The prepared materials were characterized using structural and morphological analysis, surface electrical analysis, elemental composition analysis, and specific surface area analysis. Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) analyses after the adsorption of ammonia nitrogen were used to investigate the adsorption mechanism. The experimental adsorption data were matched using the Langmuir and Freundlich isotherm models. The experimental results showed that the maximum adsorption capacity of acidified calcined bent/SiO2/CMCD for ammonia nitrogen was 18.8 mg g−1 (C0 = 50 mg L−1; pH = 10). The pseudo-secondary kinetic model (correlation coefficient of 0.9925) and the Freundlich model (correlation coefficient of 0.998) fitted the experimental results very well. From the adsorption thermodynamics results, it can be inferred that the adsorption process of ammonia nitrogen is a spontaneous exothermic process. The mechanism of adsorption of ammonia nitrogen may be related to electrostatic interactions, ion exchange and hydrogen bonding.
- 24 January 2025
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 49 (7) , 2759-2771
Adsorption of ammonium nitrogen in water by modified bentonite compounded with carboxymethyl-β-cyclodextrin
The present study investigates the potential for adsorption of ammonia nitrogen by carboxymethyl-β-cyclodextrin (CMCD) composite acidified calcined bentonite (bent)/SiO2. The prepared materials were characterized using structural and morphological analysis, surface electrical analysis, elemental composition analysis, and specific surface area analysis. Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) analyses after the adsorption of ammonia nitrogen were used to investigate the adsorption mechanism. The experimental adsorption data were matched using the Langmuir and Freundlich isotherm models. The experimental results showed that the maximum adsorption capacity of acidified calcined bent/SiO2/CMCD for ammonia nitrogen was 18.8 mg g−1 (C0 = 50 mg L−1; pH = 10). The pseudo-secondary kinetic model (correlation coefficient of 0.9925) and the Freundlich model (correlation coefficient of 0.998) fitted the experimental results very well. From the adsorption thermodynamics results, it can be inferred that the adsorption process of ammonia nitrogen is a spontaneous exothermic process. The mechanism of adsorption of ammonia nitrogen may be related to electrostatic interactions, ion exchange and hydrogen bonding.
- 1 November 2023
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 11 (6)
Water retention and sustained release of magnesium-based biochar modified hydrogel composite materials
- 1 November 2023
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 11 (6)
Water retention and sustained release of magnesium-based biochar modified hydrogel composite materials
- 12 September 2023
- Published by Elsevier in Applied Surface Science
- Vol. 640
Adsorption of phosphate in water by defective UiO-66/Ce2(CO3)3 composite: Adsorption characteristics and mechanisms
- 12 September 2023
- Published by Elsevier in Applied Surface Science
- Vol. 640
Adsorption of phosphate in water by defective UiO-66/Ce2(CO3)3 composite: Adsorption characteristics and mechanisms
- 24 August 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 652 (Pt B) , 1481-1493
Selective adsorption of nitrate in water by organosilicon quaternary ammonium salt modified derived nickel-iron layered double hydroxide: Adsorption characteristics and mechanism
- 24 August 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 652 (Pt B) , 1481-1493
Selective adsorption of nitrate in water by organosilicon quaternary ammonium salt modified derived nickel-iron layered double hydroxide: Adsorption characteristics and mechanism
- 22 March 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (16) , 7910-7921
Adsorptive removal of ciprofloxacin by a chitosan modified Fe pretreatment biochar composite from aqueous solution
With the increased use of antibiotic medications, more and more ciprofloxacin (CIP) is contaminated into the environment, which could endanger both humans and ecosystems. In this work, chitosan modified Fe pretreated biochar (CS-FBC), which was produced utilizing a straightforward and reduced synthesis process, was tested for its effectiveness in the removal of CIP from an aqueous solution. CS-FBC was analyzed using XPS, XRD, BET, SEM, FTIR, and a zetasizer. In addition, we investigated how ciprofloxacin removal was influenced by a number of variables, including initial concentration, time, pH, and temperature. The findings of the experiment showed that the adsorption impact was very rapid and could reach 80% over the first 60 minutes of the overall adsorbent. The kinetic model of CS-FBC adsorbed CIP in solution was discovered to be comparable to the pseudo-second-order kinetic model, suggesting that it may be connected to chemical adsorption. By matching the adsorption properties, a maximum peak value of 76.72 mg g−1 at 35 °C was found, and the fitting was found to match better with the Langmuir isotherm model. Investigations into the adsorption thermodynamics revealed that the process was temperature dependent and instantaneous. By raising the amount of NaCl, the adsorptive power might be reduced to an extent. However, the adsorption action was seldom affected by amounts of less than 0.01 M NaCl. Furthermore, in addition to hydrogen bonding and hydrophobic interaction, the adsorption process for CS-FBC on CIP also involves electrostatic interaction and π–π electron-donor–acceptor (EDA) interaction. The adsorption rate could still be maintained at 61.25% after 7 experiments. The removal effect of CS-FBC on CIP can prove that CS-FBC is a green, economical, and sustainable adsorbent with a low preparation cost.
- 22 March 2023
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 47 (16) , 7910-7921
Adsorptive removal of ciprofloxacin by a chitosan modified Fe pretreatment biochar composite from aqueous solution
With the increased use of antibiotic medications, more and more ciprofloxacin (CIP) is contaminated into the environment, which could endanger both humans and ecosystems. In this work, chitosan modified Fe pretreated biochar (CS-FBC), which was produced utilizing a straightforward and reduced synthesis process, was tested for its effectiveness in the removal of CIP from an aqueous solution. CS-FBC was analyzed using XPS, XRD, BET, SEM, FTIR, and a zetasizer. In addition, we investigated how ciprofloxacin removal was influenced by a number of variables, including initial concentration, time, pH, and temperature. The findings of the experiment showed that the adsorption impact was very rapid and could reach 80% over the first 60 minutes of the overall adsorbent. The kinetic model of CS-FBC adsorbed CIP in solution was discovered to be comparable to the pseudo-second-order kinetic model, suggesting that it may be connected to chemical adsorption. By matching the adsorption properties, a maximum peak value of 76.72 mg g−1 at 35 °C was found, and the fitting was found to match better with the Langmuir isotherm model. Investigations into the adsorption thermodynamics revealed that the process was temperature dependent and instantaneous. By raising the amount of NaCl, the adsorptive power might be reduced to an extent. However, the adsorption action was seldom affected by amounts of less than 0.01 M NaCl. Furthermore, in addition to hydrogen bonding and hydrophobic interaction, the adsorption process for CS-FBC on CIP also involves electrostatic interaction and π–π electron-donor–acceptor (EDA) interaction. The adsorption rate could still be maintained at 61.25% after 7 experiments. The removal effect of CS-FBC on CIP can prove that CS-FBC is a green, economical, and sustainable adsorbent with a low preparation cost.