THTianyue Hu

Tianyue Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tianyue Hu has a total of 123 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Attribute-constrained unsupervised ground-roll suppression via mid-band amplitude–phase fidelity and wavefield orthogonalization

    by Kunxi Wang, Ying Rao, Tianyue Hu, Zhencong Zhao

    Ground roll (GR) is a high-amplitude coherent noise to be attenuated during data processing. Supervised deep neural networks (DNNs) typically rely on labeled training data and often exhibit limited interpretability. To improve network interpretability for GR suppression and avoid any dependence on labeled data, we propose an unsupervised deep neural network (UDNN) based on attribute constraints (ACs) with the mid-band amplitude–phase fidelity and wavefield orthogonalization. GR predominantly contaminates the low-frequency effective signal, and the low- and mid-frequency effective components in the original data exhibit a frequency band similarity. Accordingly, we employ the mid-frequency component to reconstruct the low–mid-frequency effective signal. However, the conventional pixelwise amplitude consistency loss term for DNNs is highly susceptible to overfitting, often leaving substantial residual GR in the suppression result. To address this issue, we use the AC loss function by adding a mid-band amplitude–phase fidelity loss term and a wavefield orthogonalization loss term. The AC loss function enforces the physically constraints on output data in terms of amplitude, frequency, and phase. Under this loss function, an encoder–decoder convolutional network adaptively calibrates the amplitude, frequency, and phase of the mid-band effective component into the low–mid-band signal, thereby enabling thorough separation of GR noise. Superior noise-suppression and signal-fidelity performance are consistently observed in both time-domain sections and frequency–wavenumber spectra. The proposed method outperforms the synchrosqueezed generalized phase-shifted S-transform method, the supervised deep learning method, and UDNN variants trained using either single loss terms or two loss terms.


  • Open Access

    Deep Learning for Efficient Prestack Seismic Internal Multiples Suppression with Global-Local Feature Fusion and Optuna Optimization

    by Mengfan Zhang, Tianyue Hu, Wenshen Duan, Xixi Li

    The suppression of internal multiples remains challenging in deep oil seismic exploration, as strong impedance contrasts in the shallow and intermediate layers generate multiples that obscure the weak reflections from the deeper hydrocarbon reservoir. Traditional methods, such as inverse scattering, have limited effectiveness in suppressing internal multiples. While deep learning has demonstrated potential in internal multiple suppression, its application is still limited by the availability of high-quality training labels, challenges in processing prestack seismic field data, and the requirement of extensive human intervention. To address these issues, we propose GLO-UNet, a hybrid deep learning framework based on U-Net that incorporates a novel Global-Local Feature Fusion (GLFusion) module at the bottleneck to combine Transformer-based global context with DenseNet-based local detail via channel attention. We further perform automated hyperparameter optimization via Optuna to reduce manual parameter tuning and training time. Experiments on synthetic seismic datasets (five-layer, Sigsbee2B) demonstrate that GLO-UNet achieves superior performance in multiple suppression and primary preservation, yielding higher signal-to-noise ratios than U-Net and G-UNet, as well as substantially lower computational time than adaptive virtual events (AVE) at inference. Results on field data from Tarim Basin, Northwest China, including prestack gathers and normal-moveout (NMO) corrected profiles, confirm that GLO-UNet effectively suppresses internal multiples while preserving key primary reflections. These results show the practical efficiency and robustness of our GLO-UNet for realistic seismic exploration scenarios.


  • Surface-Related Multiple Suppression Based on Prestack Seismic Data Regularization Using Deep Neural Network Wavefield Extrapolation

    by Wensheng Duan, Jiwei Liu, Ganglin Lei, Duoming Zheng, Feixu Chen, Haijun Sun, Tianyue Hu

    The suppression of surface-related multiples has become a critical step in seismic data processing. In fact, the absence of near-offset traces acquisitions significantly compromises the accuracy of conventional surface-related multiple suppression techniques. This study presents a wavefield extrapolation deep neural network (WEDNN) for pre-stack seismic data regularization by extrapolating the far-offset to the near-offset after an initial SRME. This approach enables effective suppression of surface-related multiples in pre-stack seismic data. Validation results from some synthetic examples including the Pluto model, and a field data example confirm the effectiveness and robustness of this developed approach. The WEDNN reduces 48.83% of the seismic data information loss in the spatial domain using wavefield extrapolation, which is caused by near-offset trace deficiency. And for synthetic examples in complex work areas, computational efficiency is enhanced by 88.3%.

  • Near-Surface-Related Nonstationary Coherent Noise Suppression Using a Physically Constrained Deep Neural Network

    by Jiwei Liu, Tianyue Hu, Chunming Wang, Xixi Li, Qingcai Zeng, Lichao Liu

    Surface waves, usually referred to as Rayleigh waves and also called ground-roll, generated near surface are a kind of strong coherent noise to disturb the accuracy of subsurface image with the recorded data from a seismic survey. In the case of the further challenges posed by rugged topography and variable near-surface velocities, the surface waves and other near-surface-related noises in the field data exhibit nonstationary characteristics and their amplitude, frequency, and velocity various with recorded time. Currently, the conventional methods to suppress this type of surface wave noise are based on steady-state assumption. This paper develops a nonstationary surface wave suppression method utilizing a deep neural network constrained by physical information. This method leverages the physical characteristics of surface waves and data-driven labels to constrain neural network training jointly. It enables effective training under small sample conditions and effectively suppresses nonstationary surface waves in each prestack seismic data gather. It also effectively decreases near-surface-related nonstationary interferences such as single-frequency noise and linear noise. Examples for both numerical and field data sets demonstrate that this near-surface-related noise suppression technology can precisely eliminate nonstationary interference signals like surface waves, reconstructing effective waves with high efficiency, robustness, and generalization capability. Comparisons between the processing results of field data and those obtained using some typical commercial software confirm that the proposed deep neural network method surpasses traditional label-constrained network training limitations, offering superior suppression of surface waves, single-frequency noise, and linear interference in field data efficiently and stably with much less cost.


  • Physics-Informed Self-Supervised Learning With Phase Resemblance Constraint for Internal Multiple Attenuation

    by Xiaozhou Liu, Tianyue Hu, Shangxu Wang

    Internal multiple attenuation is a kind of significant coherent noise for imaging and comprehending subsurface structures from primaries in exploration seismic data. Traditional prediction-subtraction strategy heavily relies on predicting the traveltimes and matching the amplitudes for internal multiples, which poses a risk of primary distortions. Neural network methods face challenges about missing primary labels, limited applications on prestack field data, and high demand for prior information and manual intervention. To alleviate these problems, this paper develops a physics-informed self-supervised network (SSN) to attenuate internal multiples by reducing requirements for prior information and employing the phase resemblance (PR) as the physics loss to adaptively prevent primary distortions. First, the initial internal multiples (IIMs) predicted by virtual event method are taken as inputs for SSN to provide prior information, where no authentic primaries are required for training labels. Then, a U-shaped SSN equipped with attention mechanisms and a pyramid dilated convolution unit is constructed to map IIMs to the estimated true internal multiples (EIMs) under a physics-informed hybrid loss. We introduce the PR constraint as the physics loss by cross coherence of traces and kurtosis calculation to adaptively prevent primary distortions and constrain the network training. The result without internal multiples is finally obtained by subtracting EIMs from the recorded data. Synthetic and field data examples demonstrate the superior performance of our method in internal multiple suppression and primary retention ability compared with traditional workflow and the purely data-driven neural network.


  • Adaptive Subtraction of Post-Stack Surface Multiples Using the Pseudo-Seismic-Data-Based Convolutional Neural Network

    by Lichao Liu, Tianyue Hu

    Adaptive subtraction plays a crucial role in the surface-related multiples elimination (SRME) method. Following the acquisition of predicted surface multiples, the traditional adaptive subtraction method, based on a matching algorithm, needs to identify suitable filter operators to optimize the predicted surface multiples with the actual surface multiples present in the original data. To enhance the suppression of surface multiples, we have developed an adaptive subtraction method using the pseudo-seismic-data-based convolutional neural network (P-CNN). P-CNN takes collections of predicted surface multiples as input and can produce an output that matches the actual surface multiples after training. Application to both synthetic and field data demonstrates that the P-CNN method effectively suppresses surface multiples in seismic data. Results from complex synthetic data reveal that compared to the traditional adaptive subtraction method, the P-CNN method enhances the signal-to-noise ratio (SNR) by 3.41dB while reducing the computation time by approximately two-thirds. Furthermore, in comparison to the CNN method, the P-CNN improves suppression results without significantly increasing computational costs.


  • Weak Seismic Signal Enhancement for Low Signal-to-Noise Ratio Data Using Adaptive Nonstationary Signal Decomposition

    by Quan Qian, Tianyue Hu, Tongsheng Zeng

    Enhancing weak seismic signals in seismic data processing with a low signal-to-noise ratio (SNR) is a critical task, and it is imperative to attenuate random noise without damaging effective signals. One effective approach to achieving this is through the application of multichannel singular spectrum analysis (MSSA). However, the inherent non-stationary nature of weak signals poses a challenge for MSSA, as it struggles to completely attenuate random noise via the truncating singular value decomposition (TSVD). This study introduces a novel method referred to as adaptive non-stationary signal decomposition (ANSSD) to significantly improve the attenuation ability of seismic random noise of MSSA and enhance weak signals. Recognizing the non-stationary, non-Gaussian, and nonlinear random noise, our proposed method begins by decomposing the prestack data using singular value decomposition (SVD). Subsequently, each column of the left singular vector matrix is subjected to adaptive non-stationary signal decomposition. Finally, the data undergoes processing through truncated singular value decomposition in the frequency domain. For the synthetic data experiment, the SNR of the raw data is -14.03 dB, -4.38 dB after MSSA processing, and 0.29 dB after ANSSD processing. Meanwhile, the filed data processing results also prove that the ANSSD method is superior to the MSSA method in suppressing random noise and enhancing weak signals.


  • Seismic Internal Multiple Attenuation Based on Unsupervised Deep Learning With a Local Orthogonalization Constraint

    by Kunxi Wang, Tianyue Hu, Bangliu Zhao

    Internal multiples seriously affecting seismic inversion and imaging need to be suppressed. To suppress internal multiples, we propose a self-supervised deep learning method based on a local orthogonalization constraint (SDL-LOC). The self-supervised deep learning (SDL) consists of one multi-attention-based U-net (MA-net), two input data, and one output data. The predicted internal multiples (PIMs), obtained by the adaptive virtual event (AVE) method, and the original data are used as input data. SDL utilizes the excellent nonlinear optimization capability of MA-net to transform PIMs into the estimated true internal multiples that are the output data of SDL. Finally, the de-multiple result can be obtained by subtracting the output data from the original data. The proposed SDL-LOC uses the local orthogonalization constraint (LOC) function as part of the total loss function. The LOC function can help SDL to correctly maps PIMs into the true internal multiples with the right amplitudes and phases and prevent the output data from containing residual primaries and leaked internal multiples. Our proposed SDL-LOC method does not require true primaries or true internal multiples as the training dataset. Therefore, our proposed method has a wide range of applications and can well solve the problem of missing training datasets. We use the synthetic and land field data examples to demonstrate that our proposed method has a good internal multiple suppression effect.


  • An Unsupervised Deep Learning Method for Direct Seismic Deblending in Shot Domain

    by Kunxi Wang, Tianyue Hu, Bangliu Zhao, Shangxu Wang

    By increasing the source density, the blended data can significantly improve the seismic data quality. However, the blended data cannot be directly used in the subsequent seismic processing process, and it is necessary to separate the useful signals from the crosstalk noise. For a high-density acquisition with the denser shot coverage survey (DSCS), we propose an unsupervised deep learning (UDL) method to directly deblend the blended data in the common shot gather (CSG). Both the useful signal and the crosstalk noise in the pseudo-deblended data (PDD) are continuously coherent in CSG. By minimizing the final total loss function, the similar coherent signals from the PDD of the main and second sources are extracted using the proposed UDL method. The UDL consists of two U-nets, which extract similar features from the PDD of the main and second sources in the training stage, and directly obtain the deblended results in the test stage. The original unblended data, which may be needed for supervised learning, are not available from the actual collected blended data. However, the proposed UDL method does not require the original unblended data as training data, which solves the lack of training data. The proposed UDL method can be applied to the CSG without providing the delay time and the blending operator, so it has more flexibility. Synthetic data and field data examples show that the proposed UDL method can effectively and directly deblend the blended data in CSG under DSCS.


  • Seismic Coherence Attribute Based on Eigenvectors and Its Application

    by Jingkun Sui, Xiaodong Zheng, Qingcai Zeng, Zhifang Yang, Lideng Gan, Tianyue Hu

    The seismic coherence attribute is one of the most typically used seismic discontinuity feature detection technologies, which is widely used in fault detection, channel boundary characterization and other occasions. The eigen-structure based coherence algorithm possesses the property of stability by using the eigenvalues of seismic data’s covariance matrix. But in the algorithm, only the eigenvalues are used to calculate the final coherence value, and the information contained in eigenvectors is ignored. Through analysis, it is found that the elements in the eigenvectors represent the energy differences of seismic traces. By directly measuring the difference of different elements in an eigenvector, the energy differences between different seismic records can be effectively measured. Since the seismic data on both sides of some discontinuous boundaries, such as channel boundaries, principally show amplitude differences, the coherence properties based on eigenvectors can better characterize them. Through theoretical analysis, model testing and case application, this paper illustrates the reliability of the proposed algorithm.