Taichi Tenkumo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Taichi Tenkumo has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Keiichi Sasaki
Tohoku University Graduate School of Dentistry, Sendai, Japan
10 shared publicationsToru Ogawa
Division of Comprehensive Dentistry, Tohoku University Graduate School of Dentistry, Sendai, Japan
9 shared publications- Matthias Epple
Inorganic Chemistry and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen, 45141 Essen, Germany
6 shared publications Nobuhiro Yoda
Division of Advanced Prosthetic Dentistry, Tohoku University Graduate School of Dentistry, Sendai, Japan
6 shared publicationsViktoriya Sokolova
Inorganic Chemistry and Center for Nanointegration Duisburg-Essen (CeNIDE), University of Duisburg-Essen, Universitaetsstr. 5-7, D-45117 Essen, Germany
5 shared publicationsKeisuke Nakamura
Department of Advanced Free Radical Science Tohoku University Graduate School of Dentistry Sendai Japan
4 shared publications
Latest Publications
- Open Access
- 1 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Octa-arginine-modified calcium phosphate nanoparticles with amiloride enhance gene delivery and bone augmentation in rat calvaria
- 1 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessOcta-arginine-modified calcium phosphate nanoparticles with amiloride enhance gene delivery and bone augmentation in rat calvaria
- Open Access
- 18 April 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (4) , 198
Bone Compatibility of Experimental Ti–Ag and Ti–Cu Alloy Dental Implants in a Beagle Dog Model
Titanium–silver (Ti–Ag) and titanium–copper (Ti–Cu) alloys have been developed to improve the mechanical properties and machinability of titanium (Ti) for dental applications while maintaining corrosion resistance comparable to that of pure Ti. Herein, cylindrical dental implants composed of experimental Ti–20Ag, Ti–30Ag, Ti–5Cu, and Ti–10Cu (mass%) alloys were fabricated and implanted into the jawbones of beagle dogs to evaluate bone compatibility. Pure Ti and Ti–6Al–4V alloy implants were used as controls. Because the implant surfaces were mechanically polished, the experimental alloys, which exhibited higher hardness than Ti, showed lower surface roughness than Ti. Radiographic observations revealed no remarkable bone resorption around any implants during the experimental period. Histological evaluation demonstrated new bone formation and partial bone contact around implants at 1 and 3 months post-implantation. Although the bone–implant contact ratio was relatively low owing to the cylindrical implant design and limited initial stability, no significant differences were observed between the experimental alloys and Ti. These results indicate that Ti–Ag and Ti–Cu alloys improve mechanical properties while maintaining bone compatibility comparable to that of Ti, suggesting their potential as candidate materials for dental implant applications, particularly for narrow dental implants.
- 18 April 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (4) , 198
Open AccessBone Compatibility of Experimental Ti–Ag and Ti–Cu Alloy Dental Implants in a Beagle Dog Model
Titanium–silver (Ti–Ag) and titanium–copper (Ti–Cu) alloys have been developed to improve the mechanical properties and machinability of titanium (Ti) for dental applications while maintaining corrosion resistance comparable to that of pure Ti. Herein, cylindrical dental implants composed of experimental Ti–20Ag, Ti–30Ag, Ti–5Cu, and Ti–10Cu (mass%) alloys were fabricated and implanted into the jawbones of beagle dogs to evaluate bone compatibility. Pure Ti and Ti–6Al–4V alloy implants were used as controls. Because the implant surfaces were mechanically polished, the experimental alloys, which exhibited higher hardness than Ti, showed lower surface roughness than Ti. Radiographic observations revealed no remarkable bone resorption around any implants during the experimental period. Histological evaluation demonstrated new bone formation and partial bone contact around implants at 1 and 3 months post-implantation. Although the bone–implant contact ratio was relatively low owing to the cylindrical implant design and limited initial stability, no significant differences were observed between the experimental alloys and Ti. These results indicate that Ti–Ag and Ti–Cu alloys improve mechanical properties while maintaining bone compatibility comparable to that of Ti, suggesting their potential as candidate materials for dental implant applications, particularly for narrow dental implants.
- Open Access
- 11 December 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Can artificial intelligence optimize treatment planning and outcome prediction in fixed tooth- and implant-supported prosthodontics? A scoping review
This review aims to explore the application of AI (artificial intelligence) in fixed prosthodontics and implant-supported fixed restorations, with a specific focus on the accuracy, effectiveness, and clinical applicability of AI models for optimizing treatment planning and predicting clinical outcomes. This review followed the PCC (Population, Concept, Context) framework. A systematic search was conducted using PubMed, Scopus, and Embase for studies published between January 2010 and July 2025. Keywords included “artificial intelligence,”, “deep learning”, “digital dentistry”, “prosthodontic treatment planning,” “clinical decision support,” and “outcome prediction.” The initial databases search yielded 834 results. After selection, 20 studies were included for analysis in this review. AI applications were grouped into four domains: implant planning, crown design, full-arch framework optimization, and prognostic modeling. Convolutional neural networks (CNNs), generative adversarial networks (GANs), regression models, and optimization algorithms were most frequently employed. In implant planning, AI achieved high accuracies (90–99.5%) for site detection, drilling protocols, and bone assessment. Crown design studies demonstrated occlusal and morphological deviations within clinically acceptable thresholds (0.18–0.30 mm) and mean internal gaps of 59–83 μm, while reducing design time by up to fourfold compared with conventional workflows. For full-arch prosthetics, optimization methods such as particle swarm optimization (PSO) and bi-evolutionary structural optimization (BESO) enhanced efficiency and reduced stress concentration in simulated workflows. Prognostic modeling showed promising performance, with models achieving over 90% accuracy in predicting implant survival and treatment outcomes. AI applications in prosthodontics are most developed in implant site planning and crown design, with fewer studies on full-arch optimization and prognosis. Models generally achieve high accuracy and efficiency, but most evidence is early-stage and simulation-based. Future research should focus on prospective validation, multimodal integration, and patient-centered outcomes to ensure clinical reliability.
- 11 December 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Open AccessCan artificial intelligence optimize treatment planning and outcome prediction in fixed tooth- and implant-supported prosthodontics? A scoping review
This review aims to explore the application of AI (artificial intelligence) in fixed prosthodontics and implant-supported fixed restorations, with a specific focus on the accuracy, effectiveness, and clinical applicability of AI models for optimizing treatment planning and predicting clinical outcomes. This review followed the PCC (Population, Concept, Context) framework. A systematic search was conducted using PubMed, Scopus, and Embase for studies published between January 2010 and July 2025. Keywords included “artificial intelligence,”, “deep learning”, “digital dentistry”, “prosthodontic treatment planning,” “clinical decision support,” and “outcome prediction.” The initial databases search yielded 834 results. After selection, 20 studies were included for analysis in this review. AI applications were grouped into four domains: implant planning, crown design, full-arch framework optimization, and prognostic modeling. Convolutional neural networks (CNNs), generative adversarial networks (GANs), regression models, and optimization algorithms were most frequently employed. In implant planning, AI achieved high accuracies (90–99.5%) for site detection, drilling protocols, and bone assessment. Crown design studies demonstrated occlusal and morphological deviations within clinically acceptable thresholds (0.18–0.30 mm) and mean internal gaps of 59–83 μm, while reducing design time by up to fourfold compared with conventional workflows. For full-arch prosthetics, optimization methods such as particle swarm optimization (PSO) and bi-evolutionary structural optimization (BESO) enhanced efficiency and reduced stress concentration in simulated workflows. Prognostic modeling showed promising performance, with models achieving over 90% accuracy in predicting implant survival and treatment outcomes. AI applications in prosthodontics are most developed in implant site planning and crown design, with fewer studies on full-arch optimization and prognosis. Models generally achieve high accuracy and efficiency, but most evidence is early-stage and simulation-based. Future research should focus on prospective validation, multimodal integration, and patient-centered outcomes to ensure clinical reliability.
- Open Access
- 21 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-19
Enhanced peri-implantitis management through purple-LED irradiation coupled with silver ion application and calcium phosphate gene transfection carrier coating
The aim of this study was to investigate the bactericidal effect and recovery of biocompatibility of contaminated titanium surfaces using a combination treatment involving silver, copper, or iron ion application along with 400 nm purple-LED light irradiation. Additionally, the study sought to develop a functional calcium phosphate (CaP) coating treatment on titanium surfaces following disinfection, to promote re-osseointegration. A purple-LED emitting light at 400 nm was utilized to irradiate Staphylococcus aureus suspensions and biofilms in the presence of various concentrations of silver, copper, and iron solutions for 1 min. The bactericidal effect and electron spin resonance (ESR) spectrum were subsequently evaluated. Additionally, the hydrophilicity of the titanium surface and cell viability of MC3T3-E1 cells after combination treatment with silver ion was evaluated. Furthermore, a titanium surface coating with CaP gene transfection carrier containing plasmid DNA was developed using an electric current. The activity of hard tissue formation was then evaluated both in vitro and in vivo post-treatment. The bactericidal effect of the combination treatment with silver ions was attributed to the generation of hydroxyl radicals, whereas the effects from iron and copper treatments were not radical-mediated. The silver treatment significantly restored the hydrophilicity and cell affinity of the titanium surface. Moreover, CaP coating applied via an electric current (30 µA for 5 min) enhanced hard tissue formation activity on the titanium surface in both in vitro and in vivo settings. The combination treatment utilizing silver ions and purple-LED irradiation significantly enhanced bactericidal effects by generating high levels of hydroxyl radicals. Additionally, coating the titanium surface with functionalized CaP promoted early osseointegration, suggesting a promising strategy for improving implant outcomes.
- 21 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-19
Open AccessEnhanced peri-implantitis management through purple-LED irradiation coupled with silver ion application and calcium phosphate gene transfection carrier coating
The aim of this study was to investigate the bactericidal effect and recovery of biocompatibility of contaminated titanium surfaces using a combination treatment involving silver, copper, or iron ion application along with 400 nm purple-LED light irradiation. Additionally, the study sought to develop a functional calcium phosphate (CaP) coating treatment on titanium surfaces following disinfection, to promote re-osseointegration. A purple-LED emitting light at 400 nm was utilized to irradiate Staphylococcus aureus suspensions and biofilms in the presence of various concentrations of silver, copper, and iron solutions for 1 min. The bactericidal effect and electron spin resonance (ESR) spectrum were subsequently evaluated. Additionally, the hydrophilicity of the titanium surface and cell viability of MC3T3-E1 cells after combination treatment with silver ion was evaluated. Furthermore, a titanium surface coating with CaP gene transfection carrier containing plasmid DNA was developed using an electric current. The activity of hard tissue formation was then evaluated both in vitro and in vivo post-treatment. The bactericidal effect of the combination treatment with silver ions was attributed to the generation of hydroxyl radicals, whereas the effects from iron and copper treatments were not radical-mediated. The silver treatment significantly restored the hydrophilicity and cell affinity of the titanium surface. Moreover, CaP coating applied via an electric current (30 µA for 5 min) enhanced hard tissue formation activity on the titanium surface in both in vitro and in vivo settings. The combination treatment utilizing silver ions and purple-LED irradiation significantly enhanced bactericidal effects by generating high levels of hydroxyl radicals. Additionally, coating the titanium surface with functionalized CaP promoted early osseointegration, suggesting a promising strategy for improving implant outcomes.
- Open Access
- 4 February 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 133 (6) , 1535-1544
Three-dimensional in vivo and finite element analyses of peri-implant bone remodeling after superstructure placement
- 4 February 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 133 (6) , 1535-1544
Open AccessThree-dimensional in vivo and finite element analyses of peri-implant bone remodeling after superstructure placement
- Open Access
- 1 January 2025
- Published by Jordan University of Science and Technology in Jordan Journal of Dentistry
- Vol. 2 (1)
Effectiveness of Fully Remote Practical Training in Dental Education: A Case Study Using Video Conferencing and Communication Tools for the Preparation of Removable Partial Dentures
Objectives: This study aimed to evaluate the effectiveness of fully remote practical training for the preparation of removable partial dentures, using the video meeting platform Zoom and the communication app. LINE. Materials and Methods: Remote training was applied for one student using Zoom and LINE at the same time as in-person training for the rest of the class. Consumable and instruments needed were delivered to the student subject to remote training in advance. The student’s work was assessed in front of a web camera, at a pre-determined checkpoint during each step. The actual appliances were then mailed to the instructors and reevaluated. The extent of agreement among the assessors for the video-based and direct evaluations, as well as the extent of agreement between the video-based and direct evaluations were calculated. Results: The introduction of Zoom facilitated mutual communication between the student and the instructors. LINE has proven beneficial for practical training. A fully remote practical training class can be conducted smoothly by assigning a dedicated instructor for remote training. The Κ coefficient for agreement between monitor-based and direct evaluations was 0.704 ± 0.12. The survey results indicated that this practical training style was effective in enhancing knowledge and skills. Conclusions: Fully remote blended learning practical training is feasible using Zoom and LINE; however, the tasks to be conducted must be carefully selected. This study is a case report of a single student; thus, future studies should involve fully remote training of small groups to evaluate its educational effectiveness.
- 1 January 2025
- Published by Jordan University of Science and Technology in Jordan Journal of Dentistry
- Vol. 2 (1)
Open AccessEffectiveness of Fully Remote Practical Training in Dental Education: A Case Study Using Video Conferencing and Communication Tools for the Preparation of Removable Partial Dentures
Objectives: This study aimed to evaluate the effectiveness of fully remote practical training for the preparation of removable partial dentures, using the video meeting platform Zoom and the communication app. LINE. Materials and Methods: Remote training was applied for one student using Zoom and LINE at the same time as in-person training for the rest of the class. Consumable and instruments needed were delivered to the student subject to remote training in advance. The student’s work was assessed in front of a web camera, at a pre-determined checkpoint during each step. The actual appliances were then mailed to the instructors and reevaluated. The extent of agreement among the assessors for the video-based and direct evaluations, as well as the extent of agreement between the video-based and direct evaluations were calculated. Results: The introduction of Zoom facilitated mutual communication between the student and the instructors. LINE has proven beneficial for practical training. A fully remote practical training class can be conducted smoothly by assigning a dedicated instructor for remote training. The Κ coefficient for agreement between monitor-based and direct evaluations was 0.704 ± 0.12. The survey results indicated that this practical training style was effective in enhancing knowledge and skills. Conclusions: Fully remote blended learning practical training is feasible using Zoom and LINE; however, the tasks to be conducted must be carefully selected. This study is a case report of a single student; thus, future studies should involve fully remote training of small groups to evaluate its educational effectiveness.
- Open Access
- 12 July 2024
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 112 (7) , e35447
A triple growth factor strategy for optimizing bone augmentation in mice
With dental implant treatment becoming the gold standard, the need for effective bone augmentation prior to implantation has grown. This study aims to evaluate a bone augmentation strategy integrating three key growth factors: bone morphogenetic protein‐2 (BMP‐2), insulin‐like growth factor 1 (IGF‐1), and vascular endothelial growth factor (VEGF). Collagen scaffolds incorporating BMP‐2, IGF‐1, or VEGF were fabricated and categorized into five groups based on their content: scaffold alone; BMP‐2 alone (BMP‐2); BMP‐2 and IGF‐1 (BI); BMP‐2, IGF‐1, and VEGF (BIV); and BMP‐2 and IGF‐1 with an earlier release of VEGF (BI + V). The prepared scaffolds were surgically implanted into the calvarias of C57BL/6JJcl mice, and hard tissue formation was assessed after 10 and 28 days through histological, tomographic, and biochemical analyses. The combination of BMP‐2 and IGF‐1 induced a greater volume of hard tissue augmentation compared with that of BMP‐2 alone, regardless of VEGF supplementation, and these groups had increased levels of cartilage compared with others. The volume of hard tissue formation was greatest in the BIV group. In contrast, the BI + V group exhibited a hard tissue volume similar to that of the BI group. While VEGF and CD31 levels were highest in the BIV group at 10 days, there was no correlation at the same time point between hard tissue formation and the quantity of M2 macrophages. In conclusion, the simultaneous release of BMP‐2, IGF‐1, and VEGF proved to be effective in promoting bone augmentation.
- 12 July 2024
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 112 (7) , e35447
Open AccessA triple growth factor strategy for optimizing bone augmentation in mice
With dental implant treatment becoming the gold standard, the need for effective bone augmentation prior to implantation has grown. This study aims to evaluate a bone augmentation strategy integrating three key growth factors: bone morphogenetic protein‐2 (BMP‐2), insulin‐like growth factor 1 (IGF‐1), and vascular endothelial growth factor (VEGF). Collagen scaffolds incorporating BMP‐2, IGF‐1, or VEGF were fabricated and categorized into five groups based on their content: scaffold alone; BMP‐2 alone (BMP‐2); BMP‐2 and IGF‐1 (BI); BMP‐2, IGF‐1, and VEGF (BIV); and BMP‐2 and IGF‐1 with an earlier release of VEGF (BI + V). The prepared scaffolds were surgically implanted into the calvarias of C57BL/6JJcl mice, and hard tissue formation was assessed after 10 and 28 days through histological, tomographic, and biochemical analyses. The combination of BMP‐2 and IGF‐1 induced a greater volume of hard tissue augmentation compared with that of BMP‐2 alone, regardless of VEGF supplementation, and these groups had increased levels of cartilage compared with others. The volume of hard tissue formation was greatest in the BIV group. In contrast, the BI + V group exhibited a hard tissue volume similar to that of the BI group. While VEGF and CD31 levels were highest in the BIV group at 10 days, there was no correlation at the same time point between hard tissue formation and the quantity of M2 macrophages. In conclusion, the simultaneous release of BMP‐2, IGF‐1, and VEGF proved to be effective in promoting bone augmentation.
- Open Access
- 28 November 2023
- Published by Elsevier in Regenerative Therapy
- Vol. 25, 49-60
Development of triple-functionalized calcium phosphate nanoparticles as an advanced drug delivery system for bone tissue repair
- 28 November 2023
- Published by Elsevier in Regenerative Therapy
- Vol. 25, 49-60
Open AccessDevelopment of triple-functionalized calcium phosphate nanoparticles as an advanced drug delivery system for bone tissue repair
- Open Access
- 12 January 2023
- Published by Elsevier in Regenerative Therapy
- Vol. 22, 99-108
Introduction of tenomodulin by gene transfection vectors for rat bone tissue regeneration
- 12 January 2023
- Published by Elsevier in Regenerative Therapy
- Vol. 22, 99-108
Open AccessIntroduction of tenomodulin by gene transfection vectors for rat bone tissue regeneration
- Open Access
- 13 April 2022
- Published by Springer Nature in Research Square
Effect of Tenomodulin overexpression treatment on bone formation activity is dependent on gene transfection vectors
Tenomodulin (Tnmd) has been confirmed in periodontal ligament and reported to inhibit angiogenesis or involved in collagen fibril maturation; however, the effect of Tnmd overexpression treatment on bone regeneration therapy is not clear.Therefore, in this study we investigated the effect of Tnmd overexpression on bone formation activity in vitro and in vivo, using a calcium phosphate-based gene transfection vector (CaP) or a cationic polymer-based reagent (JetPEI). Osteogenesis- and chondrogenesis-related gene expression levels in MC3T3E1 and rat bone marrow derived cells (rBMSCs) were detected using qPCR test 3 days after gene transfection with plasmid DNA (Tnmd). The bone filling ratio was evaluated at 28 days after implantation of a collagen sponge scaffold with or without CaP (Tnmd) or JetPEI (Tnmd) in rat calvaria bone defects. The bone filling ratio of JetPEI (Tnmd) was lower than that of the scaffold alone, while that of CaP (Tnmd) was higher. The present study demonstrates that the effect of Tnmd overexpression treatment was dependent on cell lines and a non-viral gene transfection vector in vitro. The gene transfection vector should be used depending on the targeting tissue in the introduction of Tnmd overexpression treatment in tissue regeneration therapy.
- 13 April 2022
- Published by Springer Nature in Research Square
Open AccessEffect of Tenomodulin overexpression treatment on bone formation activity is dependent on gene transfection vectors
Tenomodulin (Tnmd) has been confirmed in periodontal ligament and reported to inhibit angiogenesis or involved in collagen fibril maturation; however, the effect of Tnmd overexpression treatment on bone regeneration therapy is not clear.Therefore, in this study we investigated the effect of Tnmd overexpression on bone formation activity in vitro and in vivo, using a calcium phosphate-based gene transfection vector (CaP) or a cationic polymer-based reagent (JetPEI). Osteogenesis- and chondrogenesis-related gene expression levels in MC3T3E1 and rat bone marrow derived cells (rBMSCs) were detected using qPCR test 3 days after gene transfection with plasmid DNA (Tnmd). The bone filling ratio was evaluated at 28 days after implantation of a collagen sponge scaffold with or without CaP (Tnmd) or JetPEI (Tnmd) in rat calvaria bone defects. The bone filling ratio of JetPEI (Tnmd) was lower than that of the scaffold alone, while that of CaP (Tnmd) was higher. The present study demonstrates that the effect of Tnmd overexpression treatment was dependent on cell lines and a non-viral gene transfection vector in vitro. The gene transfection vector should be used depending on the targeting tissue in the introduction of Tnmd overexpression treatment in tissue regeneration therapy.