Alexey Petrovich Duben
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexey Petrovich Duben has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- Tatiana Konstantinovna Kozubskaya
Keldysh Institute of Applied Mathematics, RAS, Moscow, Russian Federation
12 shared publications Aleksei Petrovich Duben
Keldysh Institute of Applied Mathematics of RAS
8 shared publications- Andrey Gorobets
Keldysh Institute of Applied Mathematics of Russian Academy of Sciences
7 shared publications - Pavel Vadimovich Rodionov
Keldysh Institute of Applied Mathematics, RAS, Moscow, Russian Federation
4 shared publications Татьяна Константиновна Козубская
Институт прикладной математики им. М.В. Келдыша РАН
4 shared publications- Dmitriy Kolyukhin
Trofimuk Institute of Petroleum Geology and Geophysics SB RAS , Koptug ave. 3, 630090 Novosibirsk , Russia
3 shared publications
Latest Publications
- 2 January 2026
- Published by Springer Nature
- p. 259-273
GPU Implementation of Turbulence Modeling Features for High-Fidelity Supercomputer Simulations
- 2 January 2026
- Published by Springer Nature
- p. 259-273
GPU Implementation of Turbulence Modeling Features for High-Fidelity Supercomputer Simulations
- Open Access
A rational length scale for large-eddy simulation of turbulence on anisotropic grids
Due to the prohibitive cost of resolving all relevant scales, direct numerical simulations of turbulence remain unfeasible for most real-world applications. Consequently, dynamically simplified formulations are needed for coarse-grained simulations. In this regard, eddy-viscosity models for Large-Eddy Simulation (LES) are widely used both in academia and industry. These models require a subgrid characteristic length, typically linked to the local grid size. While this length scale corresponds to the mesh step for isotropic grids, its definition for unstructured or anisotropic Cartesian meshes, such as the pancake-like meshes commonly used to capture near-wall turbulence or shear layers, remains an open question. Despite its significant influence on LES model performance, no consensus has been reached on its proper formulation. In this work, we introduce a novel subgrid characteristic length. This length scale is derived from the analysis of the entanglement between the numerical discretization and the filtering in LES. Its mathematical properties and simplicity make it a robust choice for reducing the impact of mesh anisotropies on simulation accuracy. The effectiveness of the proposed subgrid length is demonstrated through simulations of decaying isotropic turbulence and a turbulent channel flow using different codes.
Open AccessA rational length scale for large-eddy simulation of turbulence on anisotropic grids
Due to the prohibitive cost of resolving all relevant scales, direct numerical simulations of turbulence remain unfeasible for most real-world applications. Consequently, dynamically simplified formulations are needed for coarse-grained simulations. In this regard, eddy-viscosity models for Large-Eddy Simulation (LES) are widely used both in academia and industry. These models require a subgrid characteristic length, typically linked to the local grid size. While this length scale corresponds to the mesh step for isotropic grids, its definition for unstructured or anisotropic Cartesian meshes, such as the pancake-like meshes commonly used to capture near-wall turbulence or shear layers, remains an open question. Despite its significant influence on LES model performance, no consensus has been reached on its proper formulation. In this work, we introduce a novel subgrid characteristic length. This length scale is derived from the analysis of the entanglement between the numerical discretization and the filtering in LES. Its mathematical properties and simplicity make it a robust choice for reducing the impact of mesh anisotropies on simulation accuracy. The effectiveness of the proposed subgrid length is demonstrated through simulations of decaying isotropic turbulence and a turbulent channel flow using different codes.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
A rational length scale for large-eddy simulation of turbulence on anisotropic grids
Due to the prohibitive cost of resolving all relevant scales, direct numerical simulations of turbulence remain unfeasible for most real-world applications. Consequently, dynamically simplified formulations are needed for coarse-grained simulations. In this regard, eddy-viscosity models for large-eddy simulation (LES) are widely used in both academia and industry. These models require a subgrid characteristic length, typically linked to the local grid size. While this length scale corresponds to the mesh step for isotropic grids, its definition for unstructured or anisotropic Cartesian meshes, such as the pancake-like meshes commonly used to capture near-wall turbulence or shear layers, remains an open question. Despite its significant influence on LES model performance, no consensus has been reached on its proper formulation. In this work, we introduce a novel subgrid characteristic length. This length scale is derived from the analysis of the entanglement between the numerical discretization and the filtering in LES. Its mathematical properties and simplicity make it a robust choice for reducing the impact of mesh anisotropies on simulation accuracy. The effectiveness of the proposed subgrid length is demonstrated through simulations of decaying isotropic turbulence and a turbulent channel flow using different codes.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
A rational length scale for large-eddy simulation of turbulence on anisotropic grids
Due to the prohibitive cost of resolving all relevant scales, direct numerical simulations of turbulence remain unfeasible for most real-world applications. Consequently, dynamically simplified formulations are needed for coarse-grained simulations. In this regard, eddy-viscosity models for large-eddy simulation (LES) are widely used in both academia and industry. These models require a subgrid characteristic length, typically linked to the local grid size. While this length scale corresponds to the mesh step for isotropic grids, its definition for unstructured or anisotropic Cartesian meshes, such as the pancake-like meshes commonly used to capture near-wall turbulence or shear layers, remains an open question. Despite its significant influence on LES model performance, no consensus has been reached on its proper formulation. In this work, we introduce a novel subgrid characteristic length. This length scale is derived from the analysis of the entanglement between the numerical discretization and the filtering in LES. Its mathematical properties and simplicity make it a robust choice for reducing the impact of mesh anisotropies on simulation accuracy. The effectiveness of the proposed subgrid length is demonstrated through simulations of decaying isotropic turbulence and a turbulent channel flow using different codes.
- Open Access
- 1 March 2025
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 12 (1) , 94–111
Methodology for Scale-Resolving Simulation of Unsteady Effects in Turbomachines
Methodology for studying effects associated with periodic unsteady impact of neighbouring rows in turbomachines is presented. The two-stage procedure of an investigation is as follows: simulation using an approach based on solving the Reynolds-averaged Navier–Stokes equations (RANS) of an entire turbomachine at the first stage and scale-resolving simulation (SRS) of a particular row at the second. The methodology exploits the following methods and technologies, which are implemented in the NOISEtte computational algorithm: the nonlinear harmonics method as a RANS approach to obtain unsteady inflow parameters for SRS; the hybrid Improved Delayed Detached Eddy Simulation approach for SRS of the row under detailed study. SRS considers using the dynamic synthetic turbulence generator in a form of volumetric source terms (VSTG) to reproduce unsteady periodic turbulent perturbations. A dynamic version of the VSTG, the parameters of which depend on the flow upstream the source region, is formulated. Details of the parallel heterogeneous implementation of the dynamic VSTG are discussed. To demonstrate the applicability of the presented methodology, a simulation of non-stationary effects in a cascade of T106 low-pressure turbine blades was performed.
- 1 March 2025
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 12 (1) , 94–111
Open AccessMethodology for Scale-Resolving Simulation of Unsteady Effects in Turbomachines
Methodology for studying effects associated with periodic unsteady impact of neighbouring rows in turbomachines is presented. The two-stage procedure of an investigation is as follows: simulation using an approach based on solving the Reynolds-averaged Navier–Stokes equations (RANS) of an entire turbomachine at the first stage and scale-resolving simulation (SRS) of a particular row at the second. The methodology exploits the following methods and technologies, which are implemented in the NOISEtte computational algorithm: the nonlinear harmonics method as a RANS approach to obtain unsteady inflow parameters for SRS; the hybrid Improved Delayed Detached Eddy Simulation approach for SRS of the row under detailed study. SRS considers using the dynamic synthetic turbulence generator in a form of volumetric source terms (VSTG) to reproduce unsteady periodic turbulent perturbations. A dynamic version of the VSTG, the parameters of which depend on the flow upstream the source region, is formulated. Details of the parallel heterogeneous implementation of the dynamic VSTG are discussed. To demonstrate the applicability of the presented methodology, a simulation of non-stationary effects in a cascade of T106 low-pressure turbine blades was performed.
- Open Access
- 1 March 2025
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 12 (1) , 60–72
Application-Specific Parallel Linear Solver for Nonlinear Harmonics Method with Implicit Time Integration
The present paper covers specific parallel implementation details of the nonlinear harmonics (NLH) method within an implicit time integration framework. The NLH method plays an important role in industrial turbomachinery applications as it accounts for unsteady effects in modelling of compressors and turbines on a base of low-cost stationary approaches: the flow is modelled using the Reynolds-Averaged Navier–Stokes approach, the mixing plane method is used for the rotorstator interface, and only one periodic sector of a blade passage per row is considered. The main focus is on the adaptation of the linear solver used in the Newtonian process of the implicit scheme. The goal of this work is to significantly reduce memory consumption and improve performance. This goal is achieved by using a specialized block sparse matrix storage format, adapted linear solver preconditioners with approximate inverse diagonal blocks, and a combination of single- and double-precision real number formats.
- 1 March 2025
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 12 (1) , 60–72
Open AccessApplication-Specific Parallel Linear Solver for Nonlinear Harmonics Method with Implicit Time Integration
The present paper covers specific parallel implementation details of the nonlinear harmonics (NLH) method within an implicit time integration framework. The NLH method plays an important role in industrial turbomachinery applications as it accounts for unsteady effects in modelling of compressors and turbines on a base of low-cost stationary approaches: the flow is modelled using the Reynolds-Averaged Navier–Stokes approach, the mixing plane method is used for the rotorstator interface, and only one periodic sector of a blade passage per row is considered. The main focus is on the adaptation of the linear solver used in the Newtonian process of the implicit scheme. The goal of this work is to significantly reduce memory consumption and improve performance. This goal is achieved by using a specialized block sparse matrix storage format, adapted linear solver preconditioners with approximate inverse diagonal blocks, and a combination of single- and double-precision real number formats.
- Open Access
- 1 September 2024
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 11 (3) , 74-92
Wing Noise Simulation of Supersonic Business Jet in Landing Configuration
The paper presents the results of wing noise simulations for the prototype of supersonic business jet in landing mode. The near-field airflow is modeled according to Delayed Detached Eddy Simulation approach. The finite-volume vertex-centered scheme with the low weight of upwind component is used for convective flux approximation. The noise at the far-field points is calculated by the Ffowcs Williams–Hawkings method. The noise spectra at the near-field points are presented, and the impact of local mesh resolution and numerical instability on the near-field acoustics is discussed. For the Ffowcs Williams–Hawkings method due to the features of the wing geometry and the resulting flow configuration, we used non-standard integration surfaces to reduce computational costs of the scale-resolving simulations. Additionally, we employed optimized mesh resolution on the integration surfaces to significantly reduce the dick space required for storing the data for far-field noise calculations. The tests performed for the near-field and far-field points demonstrated applicability of the proposed optimizations.
- 1 September 2024
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 11 (3) , 74-92
Open AccessWing Noise Simulation of Supersonic Business Jet in Landing Configuration
The paper presents the results of wing noise simulations for the prototype of supersonic business jet in landing mode. The near-field airflow is modeled according to Delayed Detached Eddy Simulation approach. The finite-volume vertex-centered scheme with the low weight of upwind component is used for convective flux approximation. The noise at the far-field points is calculated by the Ffowcs Williams–Hawkings method. The noise spectra at the near-field points are presented, and the impact of local mesh resolution and numerical instability on the near-field acoustics is discussed. For the Ffowcs Williams–Hawkings method due to the features of the wing geometry and the resulting flow configuration, we used non-standard integration surfaces to reduce computational costs of the scale-resolving simulations. Additionally, we employed optimized mesh resolution on the integration surfaces to significantly reduce the dick space required for storing the data for far-field noise calculations. The tests performed for the near-field and far-field points demonstrated applicability of the proposed optimizations.
- 1 July 2024
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 45 (7) , 3007-3016
Nonlinear Harmonics Method for Supercomputer Simulations of Fluid Dynamics in Turbomachines with Higher Accuracy on Unstructured Meshes
The Non-Linear Harmonics (NLH) technology for simulation of flow in turbomachines is presented. It allows to consider unsteady effects related to blade passing frequencies of adjacent rows. The implementation of the NLH within the 2nd-order higher accuracy control-volume unstructured numerical algorithm realized in the parallel heterogeneous code NOISEtte is given. It includes description of mathematical models, boundary conditions (along with rotor-stator interface), numerical aspects, and accompanying computational techniques. Both explicit and implicit pseudo-time integration algorithms are described. Details of program realization, which follows hybrid MPI+OpenMP parallelization, are considered. The performance of the NLH is demonstrated on test cases.
- 1 July 2024
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 45 (7) , 3007-3016
Nonlinear Harmonics Method for Supercomputer Simulations of Fluid Dynamics in Turbomachines with Higher Accuracy on Unstructured Meshes
The Non-Linear Harmonics (NLH) technology for simulation of flow in turbomachines is presented. It allows to consider unsteady effects related to blade passing frequencies of adjacent rows. The implementation of the NLH within the 2nd-order higher accuracy control-volume unstructured numerical algorithm realized in the parallel heterogeneous code NOISEtte is given. It includes description of mathematical models, boundary conditions (along with rotor-stator interface), numerical aspects, and accompanying computational techniques. Both explicit and implicit pseudo-time integration algorithms are described. Details of program realization, which follows hybrid MPI+OpenMP parallelization, are considered. The performance of the NLH is demonstrated on test cases.
- Open Access
- 1 June 2024
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 11 (2) , 78–101
NOISEtte CFD&CAA Supercomputer Code for Research and Applications
The paper presents an overview of the CFD/CAA code NOISEtte. The code development began in the 2000s. At first it was a research code intended for elaboration of new methods and techniques in CFD and CAA. Nowadays NOISEtte is actively used as a means for solving numerically various applied problems in aviation industry, turbomachinery, helicopter manufacturing, and space rocket engineering. The code operates on mixed-element unstructured meshes, its numerical algorithm is built on higher-accuracy finite-volume methods using quasi-one-dimensional edge-based reconstruction of flow variables. It is well suited for simulating complex turbulent flows, and especially for high-fidelity scale-resolving simulation of non-stationary turbulent flows using novel RANS-LES methods. A remarkable feature of NOISEtte is its original parallel model, which allows computing with high efficiency on modern supercomputers with arbitrary architectures including CPU cores and GPU accelerators.
- 1 June 2024
- Published by FSAEIHE South Ural State University (National Research University) in Supercomputing Frontiers and Innovations
- Vol. 11 (2) , 78–101
Open AccessNOISEtte CFD&CAA Supercomputer Code for Research and Applications
The paper presents an overview of the CFD/CAA code NOISEtte. The code development began in the 2000s. At first it was a research code intended for elaboration of new methods and techniques in CFD and CAA. Nowadays NOISEtte is actively used as a means for solving numerically various applied problems in aviation industry, turbomachinery, helicopter manufacturing, and space rocket engineering. The code operates on mixed-element unstructured meshes, its numerical algorithm is built on higher-accuracy finite-volume methods using quasi-one-dimensional edge-based reconstruction of flow variables. It is well suited for simulating complex turbulent flows, and especially for high-fidelity scale-resolving simulation of non-stationary turbulent flows using novel RANS-LES methods. A remarkable feature of NOISEtte is its original parallel model, which allows computing with high efficiency on modern supercomputers with arbitrary architectures including CPU cores and GPU accelerators.