Luis Humberto Díaz Saldierna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luis Humberto Díaz Saldierna has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
J. Leyva-Ramos
11 shared publications- Jesus Leyva-Ramos
Instituto Potosino de Investigación Científica y Tecnológica, Camino a la Presa San José No. 2055, San Luis Potosí 78216, Mexico
9 shared publications - Diego Langarica-Cordoba
Department of Electrical and Computer Engineering, The University of Texas at El Paso (UTEP), El Paso, TX 79968, USA
8 shared publications M.G. Ortiz-Lopez
5 shared publications- Ma. Guadalupe Ortiz-Lopez
IMA Department, Universidad Politecnica de San Luis Potosi, San Luis Potosí 78363, Mexico
5 shared publications - Carlo A. Beltrán
Faculty of Sciences, Autonomous University of San Luis Potos (UASLP), San Luis Potos, Mexico
4 shared publications
Latest Publications
- Open Access
- 2 April 2026
- Published by MDPI AG in Electricity
- Vol. 7 (2) , 31
Different Switching Strategy for a Quadratic Boost Converter Based on Non-Series Energy Transfer (QBC-NSET)
This paper explores a new switching strategy for a recently proposed quadratic boost converter. The topology under study is a high-step-up DC–DC converter with a configuration that allows a portion of the processed energy to be used in what we call a non-series transfer. This characteristic reduces the amount of power processed redundantly. This converter, called a Quadratic Boost Converter based on Non-Series Energy Transfer (QBC-NSET), also has a non-pulsating input current, which is especially desirable for applications like photovoltaic and fuel-cell sources. This paper proposes a different switching strategy that reduces the output voltage ripple without increasing the switching frequency and without increasing the stored energy (inductance in inductors or capacitance in capacitors). The converter has two transistors, originally operated with synchronized signals; the proposed strategy provides independent switching signals with a phase shift between them. This enables the output capacitor to charge in a different switching state, producing a smaller voltage ripple while preserving the advantages of the topology originally presented. Steady-state analysis and voltage gain derivations confirm that the fundamental conversion characteristics remain unchanged. Experimental results obtained from a laboratory prototype validate the effectiveness of the proposed approach, demonstrating the reduction in the output voltage ripple.
- 2 April 2026
- Published by MDPI AG in Electricity
- Vol. 7 (2) , 31
Open AccessDifferent Switching Strategy for a Quadratic Boost Converter Based on Non-Series Energy Transfer (QBC-NSET)
This paper explores a new switching strategy for a recently proposed quadratic boost converter. The topology under study is a high-step-up DC–DC converter with a configuration that allows a portion of the processed energy to be used in what we call a non-series transfer. This characteristic reduces the amount of power processed redundantly. This converter, called a Quadratic Boost Converter based on Non-Series Energy Transfer (QBC-NSET), also has a non-pulsating input current, which is especially desirable for applications like photovoltaic and fuel-cell sources. This paper proposes a different switching strategy that reduces the output voltage ripple without increasing the switching frequency and without increasing the stored energy (inductance in inductors or capacitance in capacitors). The converter has two transistors, originally operated with synchronized signals; the proposed strategy provides independent switching signals with a phase shift between them. This enables the output capacitor to charge in a different switching state, producing a smaller voltage ripple while preserving the advantages of the topology originally presented. Steady-state analysis and voltage gain derivations confirm that the fundamental conversion characteristics remain unchanged. Experimental results obtained from a laboratory prototype validate the effectiveness of the proposed approach, demonstrating the reduction in the output voltage ripple.
- Open Access
Modeling of a Combined PEM Electrolyzer and Quadratic Step-Down Converter for the Generation of Green Hydrogen
Currently, hydrogen is considered a primary option for replacing fossil fuels across various processes, which can reduce greenhouse gas emissions and mitigate global warming. To achieve these goals, hydrogen should be produced using non-polluting processes, such as water electrolysis powered by renewable energy sources. This method requires feeding the converter with an unregulated voltage source. A quadratic step-down converter can be connected between a DC source and a Proton Exchange Membrane (PEM) electrolyzer to produce hydrogen. To mitigate variations in the generated output voltage and intermittent power supply to a PEM electrolyzer, a DC-DC converter is used as an interface. A converter model can be combined with a static or dynamic model of the PEM electrolyzer to yield switched models and, after averaging, linear state-space models. These models can be used to design robust controllers for green hydrogen production, thus significantly reducing greenhouse gas emissions. This work presents experimental and simulation results.
Open AccessModeling of a Combined PEM Electrolyzer and Quadratic Step-Down Converter for the Generation of Green Hydrogen
Currently, hydrogen is considered a primary option for replacing fossil fuels across various processes, which can reduce greenhouse gas emissions and mitigate global warming. To achieve these goals, hydrogen should be produced using non-polluting processes, such as water electrolysis powered by renewable energy sources. This method requires feeding the converter with an unregulated voltage source. A quadratic step-down converter can be connected between a DC source and a Proton Exchange Membrane (PEM) electrolyzer to produce hydrogen. To mitigate variations in the generated output voltage and intermittent power supply to a PEM electrolyzer, a DC-DC converter is used as an interface. A converter model can be combined with a static or dynamic model of the PEM electrolyzer to yield switched models and, after averaging, linear state-space models. These models can be used to design robust controllers for green hydrogen production, thus significantly reducing greenhouse gas emissions. This work presents experimental and simulation results.
- 3 November 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 252
Proportional-integral passivity-based control of a fuel cell system with an energy storage system
- 3 November 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 252
Proportional-integral passivity-based control of a fuel cell system with an energy storage system
- 17 June 2025
- Published by Springer Nature in Electrical Engineering
- p. 1-14
Estimation of PEMFC equivalent circuit model parameters via a Luenberger observer approach
- 17 June 2025
- Published by Springer Nature in Electrical Engineering
- p. 1-14
Estimation of PEMFC equivalent circuit model parameters via a Luenberger observer approach
- 6 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 14776-14783
Online Parameter Estimation of the Polarization Curve of a Fuel Cell With Guaranteed Convergence Properties: Theoretical and Experimental Results
In this article, the problem of online parameter estimation of a proton exchange membrane fuel cell (PEMFC) polarization curve, that is, the static relation between the voltage and the current of the PEMFC is addressed and solved. The task of designing this estimator—even off-line—is complicated by the fact that the uncertain parameters enter the curve in a highly nonlinear fashion, namely in the form of nonseparable nonlinearities. We consider several scenarios for the model of the polarization curve, starting from the standard full model and including several popular simplifications to this complicated mathematical function. In all cases, separable regression equations are derived—either linearly or nonlinearly parameterized—which are instrumental for the implementation of the parameter estimators. We concentrate our attention on online estimation schemes for which, under suitable excitation conditions, global parameter convergence is ensured. Due to these global convergence properties, the estimators are robust to unavoidable additive noise and structural uncertainty. Moreover, since the schemes are online, they are able to track (slow) parameter variations, that occur during the operation of the PEMFC. These two features—unavailable in time-consuming offline data-fitting procedures—make the proposed estimators helpful for online time-saving characterization of a given PEMFC, and the implementation of fault-detection procedures and model-based adaptive control strategies. Simulation and experimental results that validate the theoretical claims are presented.
- 6 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 14776-14783
Online Parameter Estimation of the Polarization Curve of a Fuel Cell With Guaranteed Convergence Properties: Theoretical and Experimental Results
In this article, the problem of online parameter estimation of a proton exchange membrane fuel cell (PEMFC) polarization curve, that is, the static relation between the voltage and the current of the PEMFC is addressed and solved. The task of designing this estimator—even off-line—is complicated by the fact that the uncertain parameters enter the curve in a highly nonlinear fashion, namely in the form of nonseparable nonlinearities. We consider several scenarios for the model of the polarization curve, starting from the standard full model and including several popular simplifications to this complicated mathematical function. In all cases, separable regression equations are derived—either linearly or nonlinearly parameterized—which are instrumental for the implementation of the parameter estimators. We concentrate our attention on online estimation schemes for which, under suitable excitation conditions, global parameter convergence is ensured. Due to these global convergence properties, the estimators are robust to unavoidable additive noise and structural uncertainty. Moreover, since the schemes are online, they are able to track (slow) parameter variations, that occur during the operation of the PEMFC. These two features—unavailable in time-consuming offline data-fitting procedures—make the proposed estimators helpful for online time-saving characterization of a given PEMFC, and the implementation of fault-detection procedures and model-based adaptive control strategies. Simulation and experimental results that validate the theoretical claims are presented.
- Open Access
Control Scheme for a Quadratic-Based Step-Down On-Board DC/DC Converter to Be Used in Hybrid Electric Vehicles
This paper discusses a switching regulator with a quadratic-based step-down DC/DC converter designed using a reduced redundant power processing principle. This converter benefits from a non-complex topology, which aims to process energy more efficiently. The switching regulator can be used on-board in hybrid electric vehicles and has a non-pulsating input current, which is suitable to process energy from lithium-ion batteries. Design expressions and steady-state operating conditions are given for the converter. Models are obtained to design and implement a two-loop controller. The simplicity of this approach is of significant value in a method of design-oriented analysis, in which the analytic results can be used to make design choices. Loop-shaping techniques are used to design a robust controller to regulate the output voltage of the proposed converter under voltage variations on the lithium-ion batteries and the changes in load current requirements, as well as parameter uncertainties of the converter. The design conditions for the gains of the controller are derived. The models of the converter are verified through experimental results for a 300 W prototype and used to design a robust controller. Finally, closed-loop time and frequency domain tests are given to show the performance of the switching regulator.
Open AccessControl Scheme for a Quadratic-Based Step-Down On-Board DC/DC Converter to Be Used in Hybrid Electric Vehicles
This paper discusses a switching regulator with a quadratic-based step-down DC/DC converter designed using a reduced redundant power processing principle. This converter benefits from a non-complex topology, which aims to process energy more efficiently. The switching regulator can be used on-board in hybrid electric vehicles and has a non-pulsating input current, which is suitable to process energy from lithium-ion batteries. Design expressions and steady-state operating conditions are given for the converter. Models are obtained to design and implement a two-loop controller. The simplicity of this approach is of significant value in a method of design-oriented analysis, in which the analytic results can be used to make design choices. Loop-shaping techniques are used to design a robust controller to regulate the output voltage of the proposed converter under voltage variations on the lithium-ion batteries and the changes in load current requirements, as well as parameter uncertainties of the converter. The design conditions for the gains of the controller are derived. The models of the converter are verified through experimental results for a 300 W prototype and used to design a robust controller. Finally, closed-loop time and frequency domain tests are given to show the performance of the switching regulator.
- Open Access
On-line Parameter Estimation of the Polarization Curve of a Fuel Cell with Guaranteed Convergence Properties: Theoretical and Experimental Results
In this paper, we address the problem of online parameter estimation of a Proton Exchange Membrane Fuel Cell (PEMFC) polarization curve, that is the static relation between the voltage and the current of the PEMFC. The task of designing this estimator -- even off-line -- is complicated by the fact that the uncertain parameters enter the curve in a highly nonlinear fashion, namely in the form of nonseparable nonlinearities. We consider several scenarios for the model of the polarization curve, starting from the standard full model and including several popular simplifications to this complicated mathematical function. In all cases, we derive separable regression equations -- either linearly or nonlinearly parameterized -- which are instrumental for the implementation of the parameter estimators. We concentrate our attention on on-line estimation schemes for which, under suitable excitation conditions, global parameter convergence is ensured. Due to these global convergence properties, the estimators are robust to unavoidable additive noise and structural uncertainty. Moreover, their on-line nature endows the schemes with the ability to track (slow) parameter variations, that occur during the operation of the PEMFC. These two features -- unavailable in time-consuming off-line data-fitting procedures -- make the proposed estimators helpful for on-line time-saving characterization of a given PEMFC, and the implementation of fault-detection procedures and model-based adaptive control strategies. Simulation and experimental results that validate the theoretical claims are presented.
Open AccessOn-line Parameter Estimation of the Polarization Curve of a Fuel Cell with Guaranteed Convergence Properties: Theoretical and Experimental Results
In this paper, we address the problem of online parameter estimation of a Proton Exchange Membrane Fuel Cell (PEMFC) polarization curve, that is the static relation between the voltage and the current of the PEMFC. The task of designing this estimator -- even off-line -- is complicated by the fact that the uncertain parameters enter the curve in a highly nonlinear fashion, namely in the form of nonseparable nonlinearities. We consider several scenarios for the model of the polarization curve, starting from the standard full model and including several popular simplifications to this complicated mathematical function. In all cases, we derive separable regression equations -- either linearly or nonlinearly parameterized -- which are instrumental for the implementation of the parameter estimators. We concentrate our attention on on-line estimation schemes for which, under suitable excitation conditions, global parameter convergence is ensured. Due to these global convergence properties, the estimators are robust to unavoidable additive noise and structural uncertainty. Moreover, their on-line nature endows the schemes with the ability to track (slow) parameter variations, that occur during the operation of the PEMFC. These two features -- unavailable in time-consuming off-line data-fitting procedures -- make the proposed estimators helpful for on-line time-saving characterization of a given PEMFC, and the implementation of fault-detection procedures and model-based adaptive control strategies. Simulation and experimental results that validate the theoretical claims are presented.
- Open Access
- 29 May 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (6) , 1144
Switching Regulator Based on a Non-Inverting Step-Down/Up DC–DC Converter for Lithium-Ion Battery Applications
A regulator based on a converter with step-down/up characteristics is discussed in this paper, which is suitable for processing energy from a lithium-ion battery pack, where the voltage fluctuates from above or below the nominal value. However, this regulator can also be used for applications such as unregulated line rectifiers and renewable energy sources, among others. The converter consists of a non-cascaded interconnection of boost and buck–boost converters such that part of the input energy is transferred directly to the output without reprocessing. Furthermore, it has a non-pulsating input current and a non-inverting output voltage, making it easier to feed the power to other devices. For control purposes, non-linear and linear converter models are derived. The transfer functions of the linear model are used to implement the regulator using a current-mode control scheme. Finally, experimental results for a nominal output voltage of 48 V at 500 W are obtained for the converter in open-loop and closed-loop tests.
- 29 May 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (6) , 1144
Open AccessSwitching Regulator Based on a Non-Inverting Step-Down/Up DC–DC Converter for Lithium-Ion Battery Applications
A regulator based on a converter with step-down/up characteristics is discussed in this paper, which is suitable for processing energy from a lithium-ion battery pack, where the voltage fluctuates from above or below the nominal value. However, this regulator can also be used for applications such as unregulated line rectifiers and renewable energy sources, among others. The converter consists of a non-cascaded interconnection of boost and buck–boost converters such that part of the input energy is transferred directly to the output without reprocessing. Furthermore, it has a non-pulsating input current and a non-inverting output voltage, making it easier to feed the power to other devices. For control purposes, non-linear and linear converter models are derived. The transfer functions of the linear model are used to implement the regulator using a current-mode control scheme. Finally, experimental results for a nominal output voltage of 48 V at 500 W are obtained for the converter in open-loop and closed-loop tests.
- Open Access
- 11 January 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (1) , 187
Passivity-Based Control for Output Voltage Regulation in a Fuel Cell/Boost Converter System
In this paper, a passivity-based control (PBC) scheme for output voltage regulation in a fuel-cell/boost converter system is designed and validated through real-time numerical results. The proposed control scheme is designed as a current-mode control (CMC) scheme with an outer loop (voltage) for voltage regulation and an inner loop (current) for current reference tracking. The inner loop’s design considers the Euler–Lagrange (E-L) formulation to implement a standard PBC and the outer loop is implemented through a standard PI controller. Furthermore, an adaptive law based on immersion and invariance (I&I) theory is designed to enhance the closed-loop system behavior through asymptotic approximation of uncertain parameters such as load and inductor parasitic resistance. The closed-loop system is tested under two scenarios using real-time simulations, where precision and robustness are shown with respect to variations in the fuel cell voltage, load, and output voltage reference.
- 11 January 2023
- Published by MDPI AG in Micromachines
- Vol. 14 (1) , 187
Open AccessPassivity-Based Control for Output Voltage Regulation in a Fuel Cell/Boost Converter System
In this paper, a passivity-based control (PBC) scheme for output voltage regulation in a fuel-cell/boost converter system is designed and validated through real-time numerical results. The proposed control scheme is designed as a current-mode control (CMC) scheme with an outer loop (voltage) for voltage regulation and an inner loop (current) for current reference tracking. The inner loop’s design considers the Euler–Lagrange (E-L) formulation to implement a standard PBC and the outer loop is implemented through a standard PI controller. Furthermore, an adaptive law based on immersion and invariance (I&I) theory is designed to enhance the closed-loop system behavior through asymptotic approximation of uncertain parameters such as load and inductor parasitic resistance. The closed-loop system is tested under two scenarios using real-time simulations, where precision and robustness are shown with respect to variations in the fuel cell voltage, load, and output voltage reference.
- 9 May 2022
- Published by Universidad Nacional Autonoma de Mexico in Revista Digital Universitaria
- Vol. 23 (3)
Sustentabilidad energética: hidrógeno como combustible limpio en la generación de electricidad
En este trabajo, se realiza una discusión sobre la generación de energía eléctrica a través de fuentes alternas que utilizan hidrógeno como combustible. Las celdas de combustible más populares son las de membrana de intercambio protónico, las cuales generan energía eléctrica a través de un proceso electroquímico, en el que las moléculas de hidrógeno son subdivididas en protones y electrones. Los electrones circulan a través de conductores, lo que genera una corriente eléctrica. Este proceso es amigable con el medio ambiente debido a que los únicos residuos que se generan son agua y vapor de agua. Estas celdas de combustible se pueden clasificar dentro de las fuentes de energía limpias; además, dependiendo de la técnica utilizada en la producción de hidrógeno, las celdas de combustible podrían clasificarse también como fuentes renovables de energía. Como consecuencia, se logra una sustentabilidad energética, ya que se garantiza un equilibrio entre el medio ambiente y el uso de los recursos naturales.
- 9 May 2022
- Published by Universidad Nacional Autonoma de Mexico in Revista Digital Universitaria
- Vol. 23 (3)
Sustentabilidad energética: hidrógeno como combustible limpio en la generación de electricidad
En este trabajo, se realiza una discusión sobre la generación de energía eléctrica a través de fuentes alternas que utilizan hidrógeno como combustible. Las celdas de combustible más populares son las de membrana de intercambio protónico, las cuales generan energía eléctrica a través de un proceso electroquímico, en el que las moléculas de hidrógeno son subdivididas en protones y electrones. Los electrones circulan a través de conductores, lo que genera una corriente eléctrica. Este proceso es amigable con el medio ambiente debido a que los únicos residuos que se generan son agua y vapor de agua. Estas celdas de combustible se pueden clasificar dentro de las fuentes de energía limpias; además, dependiendo de la técnica utilizada en la producción de hidrógeno, las celdas de combustible podrían clasificarse también como fuentes renovables de energía. Como consecuencia, se logra una sustentabilidad energética, ya que se garantiza un equilibrio entre el medio ambiente y el uso de los recursos naturales.