Dirk Bosbach
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dirk Bosbach has a total of 119 co-authors. Here are the top co-authors by number of shared publications:
- Guido Deissmann
Forschungszentrum Jülich GmbH
13 shared publications - Felix Brandt
Institute of Fusion Energy and Nuclear Waste Management (IFN-2), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany
9 shared publications - Jenna Poonoosamy
Institute of Fusion Energy and Nuclear Waste Management (IFN-2), Forschungszentrum Jülich GmbH, Jülich, Germany
9 shared publications - Martina Klinkenberg
Institute of Fusion Energy and Nuclear Waste Management (IFN‐2) Forschungszentrum Jülich GmbH Jülich Germany
7 shared publications - Gabriel L. Murphy
Institute of Fusion Energy and Nuclear Waste Management (IFN-2), Forschungszentrum Jülich GmbH, Jülich, Germany
4 shared publications - Piotr. M. Kowalski
Forschungszentrum Jülich GmbH
4 shared publications
Latest Publications
- Open Access
- 3 November 2026
- Published by Wiley
A Modified Quirk-Millington Equation for Partially Saturated Reactive Porous Media
Diffusion-induced mineral precipitation in partially saturated porous media is observed in various subsurface applications for future energy needs, such as CO 2 sequestration, deep geothermal reservoirs, and deep geological disposal of nuclear waste. The presence of gas might promote mineralization, which can significantly alter the pore space (e.g., geometry, connectivity, diffusivity), possibly causing porosity clogging, and leading to pressure build up and fracturing. Assessing the safety and stability of such systems requires understanding of the effects of mineral precipitation on porosity and effective diffusivity and quantifying the resulting reductions in these properties. Here, we developed a 3D column-diffusion experiment monitored with time resolved micro computed tomography (micro-CT) to evaluate celestine precipitation patterns within partially saturated porous media. In the scans, we can observe enhanced precipitation at the gas-liquid interface and a decrease in porosity with time. The 3D pore structures are used for tracer injection simulation with lattice Boltzmann to determine effective diffusivity. Results from three different experiments with increasing gas content show a decrease in effective diffusivity with time and are used to determine a modified porosity-diffusivity relationship in an evolving pore space as function of water saturation. A comparison with the established power law function of Quirk-Millington (QM) for sandy porous media shows that it overestimates effective diffusivity by several orders of magnitude for some cases. We propose a revised relationship of QM for describing mineralization in partially saturated porous media.
- 3 November 2026
- Published by Wiley
Open AccessA Modified Quirk-Millington Equation for Partially Saturated Reactive Porous Media
Diffusion-induced mineral precipitation in partially saturated porous media is observed in various subsurface applications for future energy needs, such as CO 2 sequestration, deep geothermal reservoirs, and deep geological disposal of nuclear waste. The presence of gas might promote mineralization, which can significantly alter the pore space (e.g., geometry, connectivity, diffusivity), possibly causing porosity clogging, and leading to pressure build up and fracturing. Assessing the safety and stability of such systems requires understanding of the effects of mineral precipitation on porosity and effective diffusivity and quantifying the resulting reductions in these properties. Here, we developed a 3D column-diffusion experiment monitored with time resolved micro computed tomography (micro-CT) to evaluate celestine precipitation patterns within partially saturated porous media. In the scans, we can observe enhanced precipitation at the gas-liquid interface and a decrease in porosity with time. The 3D pore structures are used for tracer injection simulation with lattice Boltzmann to determine effective diffusivity. Results from three different experiments with increasing gas content show a decrease in effective diffusivity with time and are used to determine a modified porosity-diffusivity relationship in an evolving pore space as function of water saturation. A comparison with the established power law function of Quirk-Millington (QM) for sandy porous media shows that it overestimates effective diffusivity by several orders of magnitude for some cases. We propose a revised relationship of QM for describing mineralization in partially saturated porous media.
- Open Access
- 30 October 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1) , 289
Chemically and microstructurally modulated high-temperature release of CsI in Nd-doped UO2 nanoceramics
The unexpected discharge of instant release fraction elements, such as Cs and I, from irradiated nuclear fuel, is one of the most concerning severe events that may occur during in-pile irradiation, the subsequent storage and final disposal, yet the underlying chemistry behind their release is poorly understood. Herein, we have examined the speciation of CsI within UO 2 nanoceramics doped with Nd as a proxy for high burn-up fuel, which was synthesised via spark plasma sintering. We demonstrate via X-ray absorption spectroscopy and electron microscopy that the addition of Nd has an impact upon the chemical speciation and dissociation of CsI in the examined materials. High temperature release studies using Knudsen effusion mass spectrometry reveal varying release patterns corresponding to Nd addition. The results of this investigation indicate that the chemistry of the UO 2 high burn-up fuel matrix, its specific microstructure and associated soluble fission products impact the chemical speciation and the high temperature release of Cs and I within irradiated fuel.
- 30 October 2026
- Published by Springer Nature in Communications Materials
- Vol. 7 (1) , 289
Open AccessChemically and microstructurally modulated high-temperature release of CsI in Nd-doped UO2 nanoceramics
The unexpected discharge of instant release fraction elements, such as Cs and I, from irradiated nuclear fuel, is one of the most concerning severe events that may occur during in-pile irradiation, the subsequent storage and final disposal, yet the underlying chemistry behind their release is poorly understood. Herein, we have examined the speciation of CsI within UO 2 nanoceramics doped with Nd as a proxy for high burn-up fuel, which was synthesised via spark plasma sintering. We demonstrate via X-ray absorption spectroscopy and electron microscopy that the addition of Nd has an impact upon the chemical speciation and dissociation of CsI in the examined materials. High temperature release studies using Knudsen effusion mass spectrometry reveal varying release patterns corresponding to Nd addition. The results of this investigation indicate that the chemistry of the UO 2 high burn-up fuel matrix, its specific microstructure and associated soluble fission products impact the chemical speciation and the high temperature release of Cs and I within irradiated fuel.
- Open Access
- 1 September 2026
- Published by Springer Nature in Research Square
Chemically and Microstructurally Modulated High-Temperature Release of CsI in Nd-doped UO2 Nanoceramics
The unexpected discharge of instant release fraction elements, such as Cs and I, from irradiated nuclear fuel, is one of the most concerning scenarios that may occur during in-pile irradiation, subsequent storage and final disposal, yet the underlying chemistry behind its release is poorly understood. Herein, we have examined the speciation of CsI within UO 2 nanoceramics doped with Nd as a proxy for high burn-up fuel synthesised via spark plasma sintering. We demonstrate via X-ray absorption spectroscopy and electron microscopy that the addition of Nd impacts the chemical speciation and dissociation of CsI in the examined materials. High temperature release studies using Knudsen effusion mass spectrometry reveal varying release patterns corresponding to Nd addition. The results of this investigation indicate that the chemistry of the UO 2 high burn-up fuel matrix, its specific microstructure and associated soluble fission products, impact the high temperature release of Cs and I within irradiated fuel.
- 1 September 2026
- Published by Springer Nature in Research Square
Open AccessChemically and Microstructurally Modulated High-Temperature Release of CsI in Nd-doped UO2 Nanoceramics
The unexpected discharge of instant release fraction elements, such as Cs and I, from irradiated nuclear fuel, is one of the most concerning scenarios that may occur during in-pile irradiation, subsequent storage and final disposal, yet the underlying chemistry behind its release is poorly understood. Herein, we have examined the speciation of CsI within UO 2 nanoceramics doped with Nd as a proxy for high burn-up fuel synthesised via spark plasma sintering. We demonstrate via X-ray absorption spectroscopy and electron microscopy that the addition of Nd impacts the chemical speciation and dissociation of CsI in the examined materials. High temperature release studies using Knudsen effusion mass spectrometry reveal varying release patterns corresponding to Nd addition. The results of this investigation indicate that the chemistry of the UO 2 high burn-up fuel matrix, its specific microstructure and associated soluble fission products, impact the high temperature release of Cs and I within irradiated fuel.
- Open Access
- 1 August 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Machine Learning and Computation
- Vol. 3 (4)
A Kolmogorov–Arnold Surrogate Model for Chemical Equilibria: Application to Solid Solutions
The computational cost of geochemical solvers is a challenging matter. For reactive transport simulations, where chemical calculations are performed up to billions of times, it is crucial to reduce the total computational time. Existing publications have explored various machine learning approaches to determine the most effective data‐driven surrogate model. In particular, multilayer perceptrons are widely employed due to their ability to recognize nonlinear relationships. In this work, we focus on the recent Kolmogorov–Arnold networks, where learnable spline‐based functions replace classical fixed activation functions. This architecture has achieved higher accuracy with fewer trainable parameters and has become increasingly popular for solving partial differential equations. First, we train a surrogate model based on an existing cement system study. Then, we move to an application case for the geological disposal of nuclear waste, that is, the determination of radionuclide‐bearing solids solubilities. To the best of our knowledge, this work is the first to investigate co‐precipitation with radionuclide incorporation using data‐driven surrogate models, considering increasing levels of thermodynamic complexity from simple mechanical mixtures to non‐ideal solid solutions of binary (Ba,Ra)SO 4 and ternary (Sr,Ba,Ra)SO 4 systems. On the cement study, we demonstrate that the Kolmogorov–Arnold architecture outperforms multilayer perceptrons in both absolute and relative error metrics, reducing them by 62% and 59%, respectively. On the binary and ternary radium solid solution models, Kolmogorov–Arnold networks maintain median prediction errors near 1 10 −3 . This is the first step toward employing surrogate models to speed up reactive transport simulations and optimize the safety assessment of deep geological waste repositories.
- 1 August 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Machine Learning and Computation
- Vol. 3 (4)
Open AccessA Kolmogorov–Arnold Surrogate Model for Chemical Equilibria: Application to Solid Solutions
The computational cost of geochemical solvers is a challenging matter. For reactive transport simulations, where chemical calculations are performed up to billions of times, it is crucial to reduce the total computational time. Existing publications have explored various machine learning approaches to determine the most effective data‐driven surrogate model. In particular, multilayer perceptrons are widely employed due to their ability to recognize nonlinear relationships. In this work, we focus on the recent Kolmogorov–Arnold networks, where learnable spline‐based functions replace classical fixed activation functions. This architecture has achieved higher accuracy with fewer trainable parameters and has become increasingly popular for solving partial differential equations. First, we train a surrogate model based on an existing cement system study. Then, we move to an application case for the geological disposal of nuclear waste, that is, the determination of radionuclide‐bearing solids solubilities. To the best of our knowledge, this work is the first to investigate co‐precipitation with radionuclide incorporation using data‐driven surrogate models, considering increasing levels of thermodynamic complexity from simple mechanical mixtures to non‐ideal solid solutions of binary (Ba,Ra)SO 4 and ternary (Sr,Ba,Ra)SO 4 systems. On the cement study, we demonstrate that the Kolmogorov–Arnold architecture outperforms multilayer perceptrons in both absolute and relative error metrics, reducing them by 62% and 59%, respectively. On the binary and ternary radium solid solution models, Kolmogorov–Arnold networks maintain median prediction errors near 1 10 −3 . This is the first step toward employing surrogate models to speed up reactive transport simulations and optimize the safety assessment of deep geological waste repositories.
- Open Access
- 17 January 2026
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 623
Corrosion of metallic beryllium in various aqueous solutions
- 17 January 2026
- Published by Elsevier in Journal of Nuclear Materials
- Vol. 623
Open AccessCorrosion of metallic beryllium in various aqueous solutions
- Open Access
- 11 July 2025
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 61 (7)
In Situ Study of Coupled Mineral Dissolution and Precipitation Processes With Gas Production in Porous Media Using Magnetic Resonance Imaging
Coupled mineral dissolution, precipitation, and gas exsolution (CDPG) are critical processes in subsurface energy applications. These phenomena occur during natural hydrogen degassing from serpentinized mafic rocks, anoxic corrosion of metallic nuclear waste canisters, and sequestration in deep saline aquifers. However, the behavior of exsolved gas within rock matrices remains poorly understood, particularly whether it is trapped by precipitates contributing to porosity clogging, or migrates with fluid flow and dissolves downstream. These uncertainties limit the accuracy of reactive transport models for predicting the long‐term evolution of such systems. Here, we developed a 3D reactive transport experiment to study the coupled dissolution of witherite (), precipitation of barite (), and exsolution of . Magnetic resonance imaging (MRI) was used for live monitoring of heterogeneous gas production and transport, to quantify the relative gas content across the porous medium. In situ measurements of pH, , differential pressure, and effluent ion concentrations aligned with MRI findings that the dissolution‐precipitation process and gas exsolution lasted for 25 hr. Scanning electron microscopy showed porosity reduction resulted from barite precipitation in pore spaces and localized clogging from precipitation on bubble surfaces. Mineral dissolution is best modeled with a reactive surface area approach that accounts for mineral passivation. While permeability changes can be estimated using the Van Genuchten‐Mualem equation based on MRI‐measured water saturation in inert porous media, this method fails to account for changes in pore structures with mineral precipitation. These results provide a robust data set for benchmarking reactive transport models and advancing understanding of CDPG.
- 11 July 2025
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 61 (7)
Open AccessIn Situ Study of Coupled Mineral Dissolution and Precipitation Processes With Gas Production in Porous Media Using Magnetic Resonance Imaging
Coupled mineral dissolution, precipitation, and gas exsolution (CDPG) are critical processes in subsurface energy applications. These phenomena occur during natural hydrogen degassing from serpentinized mafic rocks, anoxic corrosion of metallic nuclear waste canisters, and sequestration in deep saline aquifers. However, the behavior of exsolved gas within rock matrices remains poorly understood, particularly whether it is trapped by precipitates contributing to porosity clogging, or migrates with fluid flow and dissolves downstream. These uncertainties limit the accuracy of reactive transport models for predicting the long‐term evolution of such systems. Here, we developed a 3D reactive transport experiment to study the coupled dissolution of witherite (), precipitation of barite (), and exsolution of . Magnetic resonance imaging (MRI) was used for live monitoring of heterogeneous gas production and transport, to quantify the relative gas content across the porous medium. In situ measurements of pH, , differential pressure, and effluent ion concentrations aligned with MRI findings that the dissolution‐precipitation process and gas exsolution lasted for 25 hr. Scanning electron microscopy showed porosity reduction resulted from barite precipitation in pore spaces and localized clogging from precipitation on bubble surfaces. Mineral dissolution is best modeled with a reactive surface area approach that accounts for mineral passivation. While permeability changes can be estimated using the Van Genuchten‐Mualem equation based on MRI‐measured water saturation in inert porous media, this method fails to account for changes in pore structures with mineral precipitation. These results provide a robust data set for benchmarking reactive transport models and advancing understanding of CDPG.
- Open Access
Retardation of Chlorine-36 by Cementitious Materials Relevant to the Disposal of Radioactive Wastes
The activation product chlorine-36 (36Cl) is an important radionuclide within the context of the disposal of nuclear wastes, due to its long half-life and environmental mobility. Its behaviour in a range of potential cementitious encapsulants and backfill materials was studied by evaluating its uptake by pure cement hydration phases and hardened cement pastes (HCP). Limited uptake of chloride was observed on calcium silicate hydrates (C-S-H) by electrostatic sorption and by calcium monosulphoferroaluminate hydrate (AFm) phases, due to anion exchange/solid solution formation. Diffusion of 36Cl through cured monolithic HCP samples, representative of cementitious materials considered for use in deep geological repositories across Europe, revealed a markedly diverse migration behaviour. Two of the matrices, a ground granulated blast furnace slag/ordinary Portland cement blend (GGBS–OPC) and an ordinary Portland cement (CEM I) effectively retarded 36Cl migration, retaining the radionuclide in narrow, reactive zones. The migration behaviour of 36Cl within the cementitious matrices is not strictly correlated to the measured sorption distribution ratios (Rd-values), suggesting that physical factors related to the microstructure can also have a distinct effect on diffusion behaviour. The findings have implications when selecting cementitious grouts and/or backfill materials for 36Cl-bearing radioactive wastes.
Open AccessRetardation of Chlorine-36 by Cementitious Materials Relevant to the Disposal of Radioactive Wastes
The activation product chlorine-36 (36Cl) is an important radionuclide within the context of the disposal of nuclear wastes, due to its long half-life and environmental mobility. Its behaviour in a range of potential cementitious encapsulants and backfill materials was studied by evaluating its uptake by pure cement hydration phases and hardened cement pastes (HCP). Limited uptake of chloride was observed on calcium silicate hydrates (C-S-H) by electrostatic sorption and by calcium monosulphoferroaluminate hydrate (AFm) phases, due to anion exchange/solid solution formation. Diffusion of 36Cl through cured monolithic HCP samples, representative of cementitious materials considered for use in deep geological repositories across Europe, revealed a markedly diverse migration behaviour. Two of the matrices, a ground granulated blast furnace slag/ordinary Portland cement blend (GGBS–OPC) and an ordinary Portland cement (CEM I) effectively retarded 36Cl migration, retaining the radionuclide in narrow, reactive zones. The migration behaviour of 36Cl within the cementitious matrices is not strictly correlated to the measured sorption distribution ratios (Rd-values), suggesting that physical factors related to the microstructure can also have a distinct effect on diffusion behaviour. The findings have implications when selecting cementitious grouts and/or backfill materials for 36Cl-bearing radioactive wastes.
- Open Access
- 17 January 2024
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 60 (1)
Pore‐Scale Modeling of Water and Ion Diffusion in Partially Saturated Clays
An accurate mechanistic understanding of solute diffusion in partially saturated clays is critical for assessing the safety of deep geological repositories for radioactive waste. In this study, a pore‐scale numerical framework is developed to simulate water and ion diffusion in partially saturated clays. First, the two‐phase Shan‐Chen Lattice Boltzmann method is employed to establish the liquid‐gas distribution in a reconstructed three‐dimensional pore geometry of a clay. An equivalent solute method is also developed and validated to improve the numerical stability of the solution at the liquid/gas interface corresponding to steep variations of the concentration and diffusion coefficient of the water tracer. By using a mobility‐distance relationship from molecular simulations, Fick's law is numerically solved to simulate water diffusion in nanopores, while the coupled Poisson‐Boltzmann‐Nernst‐Planck equations are solved to simulate ion diffusion under the influence of the electrical double layer (EDL). Our model reveals that the decrease of relative effective diffusion coefficients during the desaturation is more pronounced for ions than for water, due to the additional transport pathway of water tracers in the gas phase. The obtained effective diffusion coefficients of tritiated water and ions agree well with reported data from compacted sedimentary rocks. By comparing the local electric potential and the distribution of ion concentrations in single pores, the simulation results suggest that the EDL in unsaturated clays has a more complex influence on ion distribution than under fully water‐saturated conditions. This study provides critical insights into the coupled transport processes of solutes in partially saturated clays.
- 17 January 2024
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 60 (1)
Open AccessPore‐Scale Modeling of Water and Ion Diffusion in Partially Saturated Clays
An accurate mechanistic understanding of solute diffusion in partially saturated clays is critical for assessing the safety of deep geological repositories for radioactive waste. In this study, a pore‐scale numerical framework is developed to simulate water and ion diffusion in partially saturated clays. First, the two‐phase Shan‐Chen Lattice Boltzmann method is employed to establish the liquid‐gas distribution in a reconstructed three‐dimensional pore geometry of a clay. An equivalent solute method is also developed and validated to improve the numerical stability of the solution at the liquid/gas interface corresponding to steep variations of the concentration and diffusion coefficient of the water tracer. By using a mobility‐distance relationship from molecular simulations, Fick's law is numerically solved to simulate water diffusion in nanopores, while the coupled Poisson‐Boltzmann‐Nernst‐Planck equations are solved to simulate ion diffusion under the influence of the electrical double layer (EDL). Our model reveals that the decrease of relative effective diffusion coefficients during the desaturation is more pronounced for ions than for water, due to the additional transport pathway of water tracers in the gas phase. The obtained effective diffusion coefficients of tritiated water and ions agree well with reported data from compacted sedimentary rocks. By comparing the local electric potential and the distribution of ion concentrations in single pores, the simulation results suggest that the EDL in unsaturated clays has a more complex influence on ion distribution than under fully water‐saturated conditions. This study provides critical insights into the coupled transport processes of solutes in partially saturated clays.
- Open Access
- 16 November 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (11)
Capturing the Dynamic Processes of Porosity Clogging
Understanding mineral precipitation induced porosity clogging and being able to quantify its non‐linear feedback on transport properties is fundamental for predicting the long‐term evolution of energy‐related subsurface systems. Commonly applied porosity‐diffusivity relations used in numerical simulations on the continuum‐scale predict the case of clogging as a final state. However, recent experiments and pore‐scale modeling investigations suggest dissolution‐recrystallization processes causing a non‐negligible inherent diffusivity of newly formed precipitates. To verify these processes, we present a novel microfluidic reactor design that combines time‐lapse optical microscopy and confocal Raman spectroscopy, providing real‐time insights of mineral precipitation induced porosity clogging under purely diffusive transport conditions. Based on 2D optical images, the effective diffusivity was determined as a function of the evolving porous media, using pore‐scale modeling. At the clogged state, Raman isotopic tracer experiments were conducted to visualize the transport of deuterium through the evolving microporosity of the precipitates, demonstrating the non‐final state of clogging. The evolution of the porosity‐diffusivity relationship in response to precipitation reactions shows a behavior deviating from Archie's law. The application of an extended power law improved the description of the evolving porosity‐diffusivity, but still neglected post‐clogging features. Our innovative combination of microfluidic experiments and pore‐scale modeling opens new possibilities to validate and identify relevant pore‐scale processes, providing data for upscaling approaches to derive key relationships for continuum‐scale reactive transport simulations.
- 16 November 2023
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 59 (11)
Open AccessCapturing the Dynamic Processes of Porosity Clogging
Understanding mineral precipitation induced porosity clogging and being able to quantify its non‐linear feedback on transport properties is fundamental for predicting the long‐term evolution of energy‐related subsurface systems. Commonly applied porosity‐diffusivity relations used in numerical simulations on the continuum‐scale predict the case of clogging as a final state. However, recent experiments and pore‐scale modeling investigations suggest dissolution‐recrystallization processes causing a non‐negligible inherent diffusivity of newly formed precipitates. To verify these processes, we present a novel microfluidic reactor design that combines time‐lapse optical microscopy and confocal Raman spectroscopy, providing real‐time insights of mineral precipitation induced porosity clogging under purely diffusive transport conditions. Based on 2D optical images, the effective diffusivity was determined as a function of the evolving porous media, using pore‐scale modeling. At the clogged state, Raman isotopic tracer experiments were conducted to visualize the transport of deuterium through the evolving microporosity of the precipitates, demonstrating the non‐final state of clogging. The evolution of the porosity‐diffusivity relationship in response to precipitation reactions shows a behavior deviating from Archie's law. The application of an extended power law improved the description of the evolving porosity‐diffusivity, but still neglected post‐clogging features. Our innovative combination of microfluidic experiments and pore‐scale modeling opens new possibilities to validate and identify relevant pore‐scale processes, providing data for upscaling approaches to derive key relationships for continuum‐scale reactive transport simulations.
- Open Access
The Use of Microfluidic Platforms with Raman Spectroscopy for Investigating the Co-Precipitation of Metals and Radionuclides in Carbonates
In the context of long-term safety assessments of deep geological repositories for radio-active wastes, a rigorous understanding of the retention of radionuclides such as 226Ra due to co-precipitation with carbonate and sulphate minerals is important for a realistic prediction of radionuclide migration behaviour in the repository near and far field. The co-precipitation of 226Ra in sulphate minerals, in particular barite, has been studied experimentally and numerically in detail throughout the last decade to establish the thermodynamic properties and mixing behaviour of its solid solutions over a wide range of temperatures. However, so far, few studies have been dedicated to the incorporation of 226Ra into carbonates, and little is known about the mixing behaviour of 226Ra and calcium carbonate phases such as calcite, aragonite, or vaterite. The aim of the work presented here was to develop and explore innovative microfluidic experiments in combination with in situ Raman spectroscopy that can be used to investigate co-precipitation processes of radionuclides in carbonate minerals, using stable Ba as a chemical analogue for 226Ra in the first step, due to their similar ionic radii. Different microfluidic set-ups were developed to address co-precipitation in bulk solution as well as in confinement or under diffusive flow regimes. It could be shown by XRD and SEM-EDX analyses that high amounts of Ba can be incorporated into the lattice of calcite when formed via an amorphous precursor phase, suggesting that the formation of calcium carbonates can contribute to the retention of 226Ra in the repository environment, which will be verified in future studies using the presented microfluidic platforms.
Open AccessThe Use of Microfluidic Platforms with Raman Spectroscopy for Investigating the Co-Precipitation of Metals and Radionuclides in Carbonates
In the context of long-term safety assessments of deep geological repositories for radio-active wastes, a rigorous understanding of the retention of radionuclides such as 226Ra due to co-precipitation with carbonate and sulphate minerals is important for a realistic prediction of radionuclide migration behaviour in the repository near and far field. The co-precipitation of 226Ra in sulphate minerals, in particular barite, has been studied experimentally and numerically in detail throughout the last decade to establish the thermodynamic properties and mixing behaviour of its solid solutions over a wide range of temperatures. However, so far, few studies have been dedicated to the incorporation of 226Ra into carbonates, and little is known about the mixing behaviour of 226Ra and calcium carbonate phases such as calcite, aragonite, or vaterite. The aim of the work presented here was to develop and explore innovative microfluidic experiments in combination with in situ Raman spectroscopy that can be used to investigate co-precipitation processes of radionuclides in carbonate minerals, using stable Ba as a chemical analogue for 226Ra in the first step, due to their similar ionic radii. Different microfluidic set-ups were developed to address co-precipitation in bulk solution as well as in confinement or under diffusive flow regimes. It could be shown by XRD and SEM-EDX analyses that high amounts of Ba can be incorporated into the lattice of calcite when formed via an amorphous precursor phase, suggesting that the formation of calcium carbonates can contribute to the retention of 226Ra in the repository environment, which will be verified in future studies using the presented microfluidic platforms.