Wei Feng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei Feng has a total of 223 co-authors. Here are the top co-authors by number of shared publications:
- Xiaodong Zhu
School of Mechanical Engineering, Chengdu University, Chengdu 610106, China
13 shared publications Lin Huang
10 shared publicationsXiaodong Zhu
7 shared publicationsDashan Guo
5 shared publicationsJuan Wang
College of Mechanical Engineering, Chengdu University, Chengdu 610106, China
5 shared publicationsKe Xiong
5 shared publications
Latest Publications
- Open Access
Direct Ink Writing 3D Printing of Anisotropic Superhydrophobic/Superelastic Porous Silicone Rubber for Recyclable Dichloromethane Absorption
Special wettability on biological surfaces generally arises from the synergy between hierarchical microstructures and surface chemistry, providing inspiration for biomimetic superhydrophobic materials. However, conventional fabrication strategies often involve complex procedures or expensive molds, limiting the precise construction of ordered microstructures. Herein, direct ink writing (DIW) 3D printing was used to fabricate polydimethylsiloxane (PDMS)-based porous silicone rubber with integrated anisotropic surface wettability (ASW), superhydrophobicity, superelasticity, and dichloromethane (DCM) absorption performance. By regulating printing speed, pneumatic pressure, and nozzle angle, porous silicone rubber with well-defined anisotropic microstructures was constructed. The DIW-printed porous silicone rubber exhibited pronounced ASW and superhydrophobicity. The material maintained structural integrity under compressive strain and rapidly recovered its original shape after unloading. After 1000 cycles of tensile and compressive loading, the tensile strength decreased while the compressive strength showed no significant degradation, demonstrating excellent superelasticity and low energy dissipation. The DIW sample showed faster DCM uptake within 30 min, compared with conventional hot-pressed PDMS materials, whereas the equilibrium adsorption capacities of both materials after one day of exposure were comparable. Meanwhile, the DIW sample exhibited excellent stability during cyclic DCM absorption. In addition, the material maintained stable DCM absorption performance under contaminated conditions and at different temperatures. This study provides a new strategy for fabricating multifunctional intelligent porous elastomers via 3D printing, and the prepared material shows possible applications in DCM–water separation and potential applications in waterproof materials and porous biomedical materials.
Open AccessDirect Ink Writing 3D Printing of Anisotropic Superhydrophobic/Superelastic Porous Silicone Rubber for Recyclable Dichloromethane Absorption
Special wettability on biological surfaces generally arises from the synergy between hierarchical microstructures and surface chemistry, providing inspiration for biomimetic superhydrophobic materials. However, conventional fabrication strategies often involve complex procedures or expensive molds, limiting the precise construction of ordered microstructures. Herein, direct ink writing (DIW) 3D printing was used to fabricate polydimethylsiloxane (PDMS)-based porous silicone rubber with integrated anisotropic surface wettability (ASW), superhydrophobicity, superelasticity, and dichloromethane (DCM) absorption performance. By regulating printing speed, pneumatic pressure, and nozzle angle, porous silicone rubber with well-defined anisotropic microstructures was constructed. The DIW-printed porous silicone rubber exhibited pronounced ASW and superhydrophobicity. The material maintained structural integrity under compressive strain and rapidly recovered its original shape after unloading. After 1000 cycles of tensile and compressive loading, the tensile strength decreased while the compressive strength showed no significant degradation, demonstrating excellent superelasticity and low energy dissipation. The DIW sample showed faster DCM uptake within 30 min, compared with conventional hot-pressed PDMS materials, whereas the equilibrium adsorption capacities of both materials after one day of exposure were comparable. Meanwhile, the DIW sample exhibited excellent stability during cyclic DCM absorption. In addition, the material maintained stable DCM absorption performance under contaminated conditions and at different temperatures. This study provides a new strategy for fabricating multifunctional intelligent porous elastomers via 3D printing, and the prepared material shows possible applications in DCM–water separation and potential applications in waterproof materials and porous biomedical materials.
- Open Access
- 20 October 2026
- Published by Elsevier in SSRN Electronic Journal
Study on the Microstructure, Mechanical Properties and Tribological Behavior of CoCrFeNi-Mox High-entropy Alloys Prepared by Powder Metallurgy
High entropy alloys of CoCrFeNi-Mox (where x = 0, 0.1, 0.2, 0.3, and 0.4, in at%) were synthesised using high-energy ball milling followed by Spark Plasma Sintering. The impact of Mo doping on the microstructure and properties of CoCrFeNi HEA was systematically examined through tensile, hardness, friction and Nanoindentation Test along with XRD analysis and micro-morphological observations. The results indicate that Mo doping, attributed to the larger size of Mo atoms, induces lattice distortion that transforms the microstructure of CoCrFeNi HEAs from a single-phase FCC to a dual-phase FCC and σ configuration. As the Mo content increases, the volume fraction of the hard and brittle σ phase rises, enhancing the tensile strength, yield strength, and hardness of the HEAs, while plasticity declines. Notably, the Mo0.1 alloy exhibits the best overall performance, with a tensile strength of 910 MPa, a yield strength of 576.7 MPa, and a plasticity of 44%. Compared to the conventional CoCrFeNi HEA, the yield and tensile strengths are significantly enhanced, with only a minor reduction in plasticity, achieving a better balance between the typically conflicting properties of strength and ductility. This represents a favourable balance between the typically opposing properties of strength and ductility in conventional metals. The alloy's hardness increases in proportion to the σ phase's volume fraction, which directly accounts for the hardness increase post-Mo doping. Micro-morphological characterisation and analysis of friction and wear tests reveal that the alloys' wear resistance increases with increasing Mo content. Consequently, a modest amount of Mo doping significantly enhances the overall performance of the CoCrFeNi HEA.
- 20 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStudy on the Microstructure, Mechanical Properties and Tribological Behavior of CoCrFeNi-Mox High-entropy Alloys Prepared by Powder Metallurgy
High entropy alloys of CoCrFeNi-Mox (where x = 0, 0.1, 0.2, 0.3, and 0.4, in at%) were synthesised using high-energy ball milling followed by Spark Plasma Sintering. The impact of Mo doping on the microstructure and properties of CoCrFeNi HEA was systematically examined through tensile, hardness, friction and Nanoindentation Test along with XRD analysis and micro-morphological observations. The results indicate that Mo doping, attributed to the larger size of Mo atoms, induces lattice distortion that transforms the microstructure of CoCrFeNi HEAs from a single-phase FCC to a dual-phase FCC and σ configuration. As the Mo content increases, the volume fraction of the hard and brittle σ phase rises, enhancing the tensile strength, yield strength, and hardness of the HEAs, while plasticity declines. Notably, the Mo0.1 alloy exhibits the best overall performance, with a tensile strength of 910 MPa, a yield strength of 576.7 MPa, and a plasticity of 44%. Compared to the conventional CoCrFeNi HEA, the yield and tensile strengths are significantly enhanced, with only a minor reduction in plasticity, achieving a better balance between the typically conflicting properties of strength and ductility. This represents a favourable balance between the typically opposing properties of strength and ductility in conventional metals. The alloy's hardness increases in proportion to the σ phase's volume fraction, which directly accounts for the hardness increase post-Mo doping. Micro-morphological characterisation and analysis of friction and wear tests reveal that the alloys' wear resistance increases with increasing Mo content. Consequently, a modest amount of Mo doping significantly enhances the overall performance of the CoCrFeNi HEA.
- Open Access
- 21 April 2026
- Published by MDPI AG in Preprints.org
Study on the Preparation and Photocatalytic Performance of TiO2 Nanotube Films on the Surface of Nickel-Doped Porous Titanium
Porous titanium materials exhibit tremendous potential in the field of photocatalytic dye degradation owing to their unique structural and performance advantages. Although traditional powder materials (such as TiO2 nanoparticles) possess high specific surface area and active sites, they suffer from issues of difficult recovery and low light utilization efficiency . Coating materials address the recovery problem by immobilizing the catalyst; however, their limitations including limited specific surface area, insufficient visible light response, and poor mechanical stability restrict their practical applications. In contrast, bulk materials with in-situ grown nano-sized titanium dioxide on the surface of a titanium core combine high specific surface area, enhanced visible light absorption capacity, and excellent mechanical stability, making them an ideal choice for photocatalytic dye degradation. In this study, nickel-doped porous titanium was used as the substrate, and Nix-TiO2 nanotube films with a three-dimensional (3D) network structure were successfully prepared via an in-situ hydrothermal method. The effects of nickel content (2.5 wt.%, 5 wt.%, 7.5 wt.%, 10 wt.%) and calcination temperature (350 ℃-750 ℃) on the structure, morphology, and photocatalytic performance of the composite materials were systematically investigated. X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption (BET) techniques were employed to characterize the phase composition, micromorphology, chemical state, and specific surface area of the samples. Methylene blue (MB, 20 mg/L) was selected as the target pollutant to evaluate the photocatalytic activity and stability of the catalysts under simulated sunlight. Results indicated that nickel did not enter the TiO2 lattice but formed nickel oxide (NiO), constructing a semiconductor composite structure. Among all samples, the Ni7.5-TiO2 catalyst exhibited the optimal photocatalytic performance, achieving a 98.35% MB degradation rate within 3 hours and maintaining excellent cyclic stability after 5 consecutive degradation cycles. The optimal calcination temperature was determined to be 450 ℃, at which TiO2 nanotubes were completely in the anatase phase with an intact 3D network structure and high crystallinity. Compared with pure titanium substrates, the porous titanium-based catalyst showed a significant enhancement in adsorption capacity, and nickel doping further improved this performance by increasing the specific surface area and providing more active sites. The synergistic effect of nickel doping and the porous titanium-based nanotube structure effectively narrowed the TiO2 band gap, inhibited the recombination of photogenerated carriers, and improved solar energy utilization efficiency. This study provides a feasible technical approach for the treatment of wastewater containing organic pollutants and enriches the research on modified TiO2 photocatalytic materials.
- 21 April 2026
- Published by MDPI AG in Preprints.org
Open AccessStudy on the Preparation and Photocatalytic Performance of TiO2 Nanotube Films on the Surface of Nickel-Doped Porous Titanium
Porous titanium materials exhibit tremendous potential in the field of photocatalytic dye degradation owing to their unique structural and performance advantages. Although traditional powder materials (such as TiO2 nanoparticles) possess high specific surface area and active sites, they suffer from issues of difficult recovery and low light utilization efficiency . Coating materials address the recovery problem by immobilizing the catalyst; however, their limitations including limited specific surface area, insufficient visible light response, and poor mechanical stability restrict their practical applications. In contrast, bulk materials with in-situ grown nano-sized titanium dioxide on the surface of a titanium core combine high specific surface area, enhanced visible light absorption capacity, and excellent mechanical stability, making them an ideal choice for photocatalytic dye degradation. In this study, nickel-doped porous titanium was used as the substrate, and Nix-TiO2 nanotube films with a three-dimensional (3D) network structure were successfully prepared via an in-situ hydrothermal method. The effects of nickel content (2.5 wt.%, 5 wt.%, 7.5 wt.%, 10 wt.%) and calcination temperature (350 ℃-750 ℃) on the structure, morphology, and photocatalytic performance of the composite materials were systematically investigated. X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption (BET) techniques were employed to characterize the phase composition, micromorphology, chemical state, and specific surface area of the samples. Methylene blue (MB, 20 mg/L) was selected as the target pollutant to evaluate the photocatalytic activity and stability of the catalysts under simulated sunlight. Results indicated that nickel did not enter the TiO2 lattice but formed nickel oxide (NiO), constructing a semiconductor composite structure. Among all samples, the Ni7.5-TiO2 catalyst exhibited the optimal photocatalytic performance, achieving a 98.35% MB degradation rate within 3 hours and maintaining excellent cyclic stability after 5 consecutive degradation cycles. The optimal calcination temperature was determined to be 450 ℃, at which TiO2 nanotubes were completely in the anatase phase with an intact 3D network structure and high crystallinity. Compared with pure titanium substrates, the porous titanium-based catalyst showed a significant enhancement in adsorption capacity, and nickel doping further improved this performance by increasing the specific surface area and providing more active sites. The synergistic effect of nickel doping and the porous titanium-based nanotube structure effectively narrowed the TiO2 band gap, inhibited the recombination of photogenerated carriers, and improved solar energy utilization efficiency. This study provides a feasible technical approach for the treatment of wastewater containing organic pollutants and enriches the research on modified TiO2 photocatalytic materials.
- Open Access
- 18 April 2026
- Published by Elsevier in SSRN Electronic Journal
Effects of Different Nickel Contents on the Microstructure and Properties of Ultrafine-Grained WC-3Co Cemented CarbidesMicrostructure of WC Cemented Carbide
This study investigated the effects of nickel content on ultrafine-grained WC-3(Co-Ni) cemented carbides fabricated via wet ball milling and low-pressure sintering. Maintaining a constant 3 wt.% total binder content, the Ni/(Co+Ni) ratio was systematically varied.The coercivity and transverse rupture strength initially increased, peaking at 0.75% Ni, before declining with further Ni additions. Hardness and densification showed a continuous decreasing trend. Fracture toughness reached its maximum at 2.25% Ni. The optimal composition was identified as ω(Co):ω(Ni)=3:1 (0.75% Ni), exhibiting a balanced property profile: hardness of 2356 HV30, TRS of 2272 MPa, and fracture toughness of 8.78 MPa·m1/2.In 0.1 mol/L HCl, corrosion performance initially improved with Ni addition. The WC-1.5Co-1.5Ni alloy showed a 0.189 V positive shift in corrosion potential and an order-of-magnitude decrease in corrosion current density compared to WC-3Co. However, corrosion resistance deteriorated when Ni content exceeded 1.5%. The primary degradation mechanism involved preferential Co dissolution, leading to WC grain detachment and subsequent oxidation to WO3.Nickel enhances corrosion resistance through dual mechanisms: forming a Co-Ni solid solution that reduces the galvanic potential difference with WC, slowing Co dissolution; and generating a protective NiO/Ni(OH)2 passive film that impedes charge transfer and electrolyte penetration. This synergistic electrochemical modulation and surface passivation significantly improve HCl corrosion resistance.
- 18 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffects of Different Nickel Contents on the Microstructure and Properties of Ultrafine-Grained WC-3Co Cemented CarbidesMicrostructure of WC Cemented Carbide
This study investigated the effects of nickel content on ultrafine-grained WC-3(Co-Ni) cemented carbides fabricated via wet ball milling and low-pressure sintering. Maintaining a constant 3 wt.% total binder content, the Ni/(Co+Ni) ratio was systematically varied.The coercivity and transverse rupture strength initially increased, peaking at 0.75% Ni, before declining with further Ni additions. Hardness and densification showed a continuous decreasing trend. Fracture toughness reached its maximum at 2.25% Ni. The optimal composition was identified as ω(Co):ω(Ni)=3:1 (0.75% Ni), exhibiting a balanced property profile: hardness of 2356 HV30, TRS of 2272 MPa, and fracture toughness of 8.78 MPa·m1/2.In 0.1 mol/L HCl, corrosion performance initially improved with Ni addition. The WC-1.5Co-1.5Ni alloy showed a 0.189 V positive shift in corrosion potential and an order-of-magnitude decrease in corrosion current density compared to WC-3Co. However, corrosion resistance deteriorated when Ni content exceeded 1.5%. The primary degradation mechanism involved preferential Co dissolution, leading to WC grain detachment and subsequent oxidation to WO3.Nickel enhances corrosion resistance through dual mechanisms: forming a Co-Ni solid solution that reduces the galvanic potential difference with WC, slowing Co dissolution; and generating a protective NiO/Ni(OH)2 passive film that impedes charge transfer and electrolyte penetration. This synergistic electrochemical modulation and surface passivation significantly improve HCl corrosion resistance.
- Open Access
- 13 March 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (7)
Effects of SiC contents on mechanical properties and thermal conductivity of SiC/Mg composites
SiC/Mg composites with varying SiC contents (0, 5, 15, and 25 wt.%) were fabricated via powder metallurgy. The effects of micron-sized SiC particles with different contents on the mechanical properties and thermal conductivity of the composites were studied. The results show that when 5 wt.% SiC is added, the yield strength (YS) and ultimate tensile strength (UTS) of the composite increase to 176.9 MPa and 218.9 MPa, respectively, which are 20.8 % and 7.6 % higher than those of pure Mg. However, when the SiC content is ≥ 15 wt.%, the mechanical properties decrease due to the increase of porosity. On the contrary, with the increase of SiC content, the thermal conductivity continues to increase. The highest thermal conductivity (153.6 W/(m·K)) and thermal diffusivity (82.1 mm2/s) were obtained at 25 wt.% SiC addition. This is because the inherent high thermal conductivity of SiC particles offsets the adverse effects of these defects, thereby improving the overall thermal performance.
- 13 March 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (7)
Open AccessEffects of SiC contents on mechanical properties and thermal conductivity of SiC/Mg composites
SiC/Mg composites with varying SiC contents (0, 5, 15, and 25 wt.%) were fabricated via powder metallurgy. The effects of micron-sized SiC particles with different contents on the mechanical properties and thermal conductivity of the composites were studied. The results show that when 5 wt.% SiC is added, the yield strength (YS) and ultimate tensile strength (UTS) of the composite increase to 176.9 MPa and 218.9 MPa, respectively, which are 20.8 % and 7.6 % higher than those of pure Mg. However, when the SiC content is ≥ 15 wt.%, the mechanical properties decrease due to the increase of porosity. On the contrary, with the increase of SiC content, the thermal conductivity continues to increase. The highest thermal conductivity (153.6 W/(m·K)) and thermal diffusivity (82.1 mm2/s) were obtained at 25 wt.% SiC addition. This is because the inherent high thermal conductivity of SiC particles offsets the adverse effects of these defects, thereby improving the overall thermal performance.
- Open Access
Applications of Machine Learning in High-Entropy Alloys: Phase Prediction, Performance Optimization, and Compositional Space Exploration
The rapid advancement of machine learning (ML) has ushered in a new era for materials science, particularly in the design and understanding of high-entropy alloys (HEAs). As a class of compositionally complex materials, HEAs have greatly benefited from the predictive power and computational efficiency of ML techniques. Recent years have witnessed remarkable expansion in the scope and sophistication of ML applications to HEAs, spanning from phase formation prediction to property and microstructure modeling. These developments have significantly accelerated the discovery and optimization of novel HEA systems. This review provides a comprehensive overview of the current progress and emerging trends in applying ML to HEA research. We first discuss phase prediction methodologies, encompassing both pure ML frameworks and hybrid physics-informed models. Subsequently, we summarize advances in ML-driven prediction of HEA properties and microstructural features. Further sections highlight the role of ML in exploring vast compositional spaces, guiding the design of high-performance HEAs, and optimizing existing alloys through data-driven algorithms. Finally, the challenges and limitations of current approaches are critically examined, and future directions are proposed toward interpretable models, mechanistic understanding, and efficient exploration of the HEA design space.
Open AccessApplications of Machine Learning in High-Entropy Alloys: Phase Prediction, Performance Optimization, and Compositional Space Exploration
The rapid advancement of machine learning (ML) has ushered in a new era for materials science, particularly in the design and understanding of high-entropy alloys (HEAs). As a class of compositionally complex materials, HEAs have greatly benefited from the predictive power and computational efficiency of ML techniques. Recent years have witnessed remarkable expansion in the scope and sophistication of ML applications to HEAs, spanning from phase formation prediction to property and microstructure modeling. These developments have significantly accelerated the discovery and optimization of novel HEA systems. This review provides a comprehensive overview of the current progress and emerging trends in applying ML to HEA research. We first discuss phase prediction methodologies, encompassing both pure ML frameworks and hybrid physics-informed models. Subsequently, we summarize advances in ML-driven prediction of HEA properties and microstructural features. Further sections highlight the role of ML in exploring vast compositional spaces, guiding the design of high-performance HEAs, and optimizing existing alloys through data-driven algorithms. Finally, the challenges and limitations of current approaches are critically examined, and future directions are proposed toward interpretable models, mechanistic understanding, and efficient exploration of the HEA design space.
- 15 October 2025
- Published by Elsevier in Materials Today Communications
- Vol. 49
Study on electrical contact properties and mechanism of nanometer tantalum carbide particles reinforced W-30Cu composites
- 15 October 2025
- Published by Elsevier in Materials Today Communications
- Vol. 49
Study on electrical contact properties and mechanism of nanometer tantalum carbide particles reinforced W-30Cu composites
- Open Access
- 7 October 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 39, 2939-2954
Effect of Mo content on the high temperature properties of CoCrFeNi high entropy alloys
- 7 October 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 39, 2939-2954
Open AccessEffect of Mo content on the high temperature properties of CoCrFeNi high entropy alloys
- Open Access
- 13 September 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 39, 179-188
Effect of AlCoCrFeNiTi high entropy bonding phase with different content on properties and microstructure of WC cemented carbide
- 13 September 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 39, 179-188
Open AccessEffect of AlCoCrFeNiTi high entropy bonding phase with different content on properties and microstructure of WC cemented carbide
- Open Access
- 17 July 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 37, 5578-5592
Effect of Nb content on the properties of Al0.1CoCrFeNi high-entropy alloy
- 17 July 2025
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 37, 5578-5592
Open AccessEffect of Nb content on the properties of Al0.1CoCrFeNi high-entropy alloy