Diego Gino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Diego Gino has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Paolo Castaldo
Politecnico di Torino
12 shared publications Giuseppe Mancini
Autostrada dei Fiori S.p.A
8 shared publications- Elena Miceli
Politecnico di Torino
7 shared publications Gabriele Bertagnoli
Department of Structural, Geotechnical and Building Engineering (DISEG) Politecnico di Torino Turin Italy
5 shared publications- Gabriele Bertagnoli
Department of Structural, Geotechnical and Building Engineering (DISEG), Politecnico di Torino, 10129 Turin, Italy
4 shared publications Luca Giordano
Politecnico di Torino
4 shared publications
Latest Publications
- 9 October 2026
- Published by Springer Nature
- p. 1001-1011
Optimal Seismic Isolation Properties of Multi-Span Bridges Under Asynchronous Earthquakes
- 9 October 2026
- Published by Springer Nature
- p. 1001-1011
Optimal Seismic Isolation Properties of Multi-Span Bridges Under Asynchronous Earthquakes
- 9 October 2026
- Published by Springer Nature
- p. 991-1000
Identification of Optimal Parameters for Lateral Impact-Resilient Friction Pendulum Isolators
- 9 October 2026
- Published by Springer Nature
- p. 991-1000
Identification of Optimal Parameters for Lateral Impact-Resilient Friction Pendulum Isolators
- 1 October 2025
- Published by Springer Nature
- p. 381-389
Investigation of the Ultimate Response of an Existing PRC Bridge Beam after 60 Years of Working Life
- 1 October 2025
- Published by Springer Nature
- p. 381-389
Investigation of the Ultimate Response of an Existing PRC Bridge Beam after 60 Years of Working Life
- 1 December 2024
- Published by Springer Nature
- p. 286-293
Safety Evaluation of an Existing PRC Bridge Beam: Preliminary Outcomes of In-Situ Test
- 1 December 2024
- Published by Springer Nature
- p. 286-293
Safety Evaluation of an Existing PRC Bridge Beam: Preliminary Outcomes of In-Situ Test
- 24 February 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (3) , 1637-1657
Safety assessment of existing prestressed reinforced concrete bridge decks through different approaches
The assessment of existing reinforced concrete (RC) structures, especially, bridges and viaducts, nowadays is one of the most relevant aspects for infrastructural engineers. Due to the old age of a large part of the railways and roadways assets, their safety, especially, with respect to the Ultimate Limit States (ULS) may result compromised. Safety assessment can be performed following different approaches as well as the most sophisticated methodologies based on the application of safety formats for non‐linear finite element (FE) analyses. This study presents the safety assessment at the ULS of existing prestressed RC bridge decks regarding bending moment and axial force failure mechanism adopting different methodologies. Specifically, the safety assessment will be performed through five different approaches (i.e., Courbon theory, elastic FE analysis, and NLFEAs according to the three global safety formats). The decks are modeled using, first, Courbon theory and then, girder FE model composed only of beam elements. The safety assessment is performed by comparing the design resisting moment and design acting moment in the section of interest, therefore, through a local approach. Within the local approach, design values are calculated using the partial safety factors. Afterwards, the decks are modeled with a 3D non‐linear FE model. Three different global safety formats are implemented within a global approach. The application of the different approaches leads to significantly different conclusions about the safety assessment. The two local approaches are the most conservative, therefore, lead to a lower safety margin. The application of global approaches based on global safety formats leads to a safety margin gain compared to local approaches, with significant variability in terms of safety margin gain depending on the specific global safety format.
- 24 February 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (3) , 1637-1657
Safety assessment of existing prestressed reinforced concrete bridge decks through different approaches
The assessment of existing reinforced concrete (RC) structures, especially, bridges and viaducts, nowadays is one of the most relevant aspects for infrastructural engineers. Due to the old age of a large part of the railways and roadways assets, their safety, especially, with respect to the Ultimate Limit States (ULS) may result compromised. Safety assessment can be performed following different approaches as well as the most sophisticated methodologies based on the application of safety formats for non‐linear finite element (FE) analyses. This study presents the safety assessment at the ULS of existing prestressed RC bridge decks regarding bending moment and axial force failure mechanism adopting different methodologies. Specifically, the safety assessment will be performed through five different approaches (i.e., Courbon theory, elastic FE analysis, and NLFEAs according to the three global safety formats). The decks are modeled using, first, Courbon theory and then, girder FE model composed only of beam elements. The safety assessment is performed by comparing the design resisting moment and design acting moment in the section of interest, therefore, through a local approach. Within the local approach, design values are calculated using the partial safety factors. Afterwards, the decks are modeled with a 3D non‐linear FE model. Three different global safety formats are implemented within a global approach. The application of the different approaches leads to significantly different conclusions about the safety assessment. The two local approaches are the most conservative, therefore, lead to a lower safety margin. The application of global approaches based on global safety formats leads to a safety margin gain compared to local approaches, with significant variability in terms of safety margin gain depending on the specific global safety format.
- 31 October 2023
- Published by Springer Nature
- p. 579-587
Space Architecture Goes Green: Investigating the Use of Hemp-Fibre Concrete for Martian Structures
- 31 October 2023
- Published by Springer Nature
- p. 579-587
Space Architecture Goes Green: Investigating the Use of Hemp-Fibre Concrete for Martian Structures
- 15 September 2023
- Published by Springer Nature
- p. 207-220
Comparison of Different Approaches to Derive Global Safety Factors for Non-linear Analyses of Slender RC Members
- 15 September 2023
- Published by Springer Nature
- p. 207-220
Comparison of Different Approaches to Derive Global Safety Factors for Non-linear Analyses of Slender RC Members
- 1 June 2023
- Published by Springer Nature
- p. 1827-1836
Full-Scale Experimental Testing on a Reinforced Bridge RC Beam: Experimental and SHM Results
- 1 June 2023
- Published by Springer Nature
- p. 1827-1836
Full-Scale Experimental Testing on a Reinforced Bridge RC Beam: Experimental and SHM Results
- Open Access
- 9 March 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (6) , 3509
Influence of Masonry Infills on Seismic Performance of an Existing RC Building Retrofitted by Means of FPS Devices
The safety assessment of existing structures in areas with a relevant seismic hazard is one of the major topics for engineers since many existing reinforced concrete structures have been realized disregarding seismic design with minimal details with respect to present practice. In this context, seismic assessment is a primary issue in order to identify the best retrofitting solution with the aim of enhancing the efficiency of existing buildings. In recent years, with the aim to enhance the seismic behavior of reinforced concrete (RC) structures (with particular care to existing ones), the system of seismic isolation adopting friction pendulum (FPS) devices proved to be among the most diffuse and effective solutions. The purpose of this paper is to explore the effectiveness of the refurbishment using FPS with single concavity devices on the performance of one irregular existing RC building placed in a highly seismic area of central Italy. First, the geometric and material characteristics of the building have been determined within the approach based on the “knowledge levels”. Second, a suitable numerical model based on a fiber-modeling approach has been established using SAP2000, including relevant mechanical non-linearities. Then, a set of 21 natural seismic inputs, inclusive of 3 accelerations over vertical and horizontal directions, was adopted with the aim of performing non-linear (NL) dynamic simulations. The NL dynamic simulations have been performed considering the structural system, both inclusive and not inclusive of the FPS isolator devices. The influence of the actual distribution of infill masonry panels on the overall behavior of the structure has also been evaluated in both of the cases mentioned above. Finally, the outcomes deriving from the NL dynamic simulations were helpful in assessing the advantages of the intervention of retrofitting to improve the seismic performance of the building, highlighting the influence of masonry infills.
- 9 March 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (6) , 3509
Open AccessInfluence of Masonry Infills on Seismic Performance of an Existing RC Building Retrofitted by Means of FPS Devices
The safety assessment of existing structures in areas with a relevant seismic hazard is one of the major topics for engineers since many existing reinforced concrete structures have been realized disregarding seismic design with minimal details with respect to present practice. In this context, seismic assessment is a primary issue in order to identify the best retrofitting solution with the aim of enhancing the efficiency of existing buildings. In recent years, with the aim to enhance the seismic behavior of reinforced concrete (RC) structures (with particular care to existing ones), the system of seismic isolation adopting friction pendulum (FPS) devices proved to be among the most diffuse and effective solutions. The purpose of this paper is to explore the effectiveness of the refurbishment using FPS with single concavity devices on the performance of one irregular existing RC building placed in a highly seismic area of central Italy. First, the geometric and material characteristics of the building have been determined within the approach based on the “knowledge levels”. Second, a suitable numerical model based on a fiber-modeling approach has been established using SAP2000, including relevant mechanical non-linearities. Then, a set of 21 natural seismic inputs, inclusive of 3 accelerations over vertical and horizontal directions, was adopted with the aim of performing non-linear (NL) dynamic simulations. The NL dynamic simulations have been performed considering the structural system, both inclusive and not inclusive of the FPS isolator devices. The influence of the actual distribution of infill masonry panels on the overall behavior of the structure has also been evaluated in both of the cases mentioned above. Finally, the outcomes deriving from the NL dynamic simulations were helpful in assessing the advantages of the intervention of retrofitting to improve the seismic performance of the building, highlighting the influence of masonry infills.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2928 (1)
Probabilistic assessment of an irregular existing RC structure: The effectiveness of the retrofitting intervention using FPS
The seismic assessment of existing structures is an issue of high relevance for researches and practitioners. In general, design codes of the past (e.g., during the ‘60-’70) have not been conceived for seismic design and they report just limited recommendations for detailing of main members as columns and beams. With the aim to fulfil performance requirements of existing RC structures against seismic action (both concerning serviceability and ultimate limit states) several intervention approaches are available (e.g., active and/or passive control techniques). Over the last years, one of the most diffused technique is the use of passive seismic protection by means friction pendulum system (FPS). The purpose of this investigation is to investigate, with a probabilistic approach, the efficiency of the retrofitting intervention using single concave friction pendulum system (SC-FPS) on an existing RC structure placed in an area subjected to high seismicity. The herein considered existing RC building presents irregular configuration both in plan and in elevation and has been built without appropriate seismic detailing. Several non-linear dynamic analyses have been performed using fiber-modelling approach and adopting multiple seismic records characterized by accelerometric components in three directions. The seismic performance has been evaluated for the structure with and without the retrofitting intervention by SC-FPS highlighting its effectiveness also in the case of irregular buildings.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2928 (1)
Probabilistic assessment of an irregular existing RC structure: The effectiveness of the retrofitting intervention using FPS
The seismic assessment of existing structures is an issue of high relevance for researches and practitioners. In general, design codes of the past (e.g., during the ‘60-’70) have not been conceived for seismic design and they report just limited recommendations for detailing of main members as columns and beams. With the aim to fulfil performance requirements of existing RC structures against seismic action (both concerning serviceability and ultimate limit states) several intervention approaches are available (e.g., active and/or passive control techniques). Over the last years, one of the most diffused technique is the use of passive seismic protection by means friction pendulum system (FPS). The purpose of this investigation is to investigate, with a probabilistic approach, the efficiency of the retrofitting intervention using single concave friction pendulum system (SC-FPS) on an existing RC structure placed in an area subjected to high seismicity. The herein considered existing RC building presents irregular configuration both in plan and in elevation and has been built without appropriate seismic detailing. Several non-linear dynamic analyses have been performed using fiber-modelling approach and adopting multiple seismic records characterized by accelerometric components in three directions. The seismic performance has been evaluated for the structure with and without the retrofitting intervention by SC-FPS highlighting its effectiveness also in the case of irregular buildings.