Jianfei Lei
Research Subjects
Jianfei Lei has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
Yanfei Liu
6 shared publicationsYing Chen
6 shared publicationsChenming Liang
5 shared publicationsFang Wang
4 shared publicationsZexin Liang
College of Physics and Engineering Henan University of Science and Technology Luoyang China
4 shared publications- Zhaowu Wang
School of Science, Hebei University of Technology, Tianjin 300401, China
4 shared publications
Latest Publications
Synergistic Morphological and Electronic Engineering of NiFeOOH via Ultrafast Room Temperature Fabrication for Enhanced OER
Low‐cost, high‐performance oxygen evolution reaction (OER) catalysts are considered pivotal to enabling the industrial‐scale production of green hydrogen via water electrolysis. Herein, we report an ultrafast (30 s) room‐temperature approach to fabricating a biomimetic NiFeOOH electrocatalyst directly on nickel foam. The resulting material featuring a chloroplast‐inspired hierarchical nanosheet architecture and is enriched with oxygen vacancies. This unique design achieves exceptional OER activity, requiring an overpotential of only 260 mV to deliver 100 mA cm −2 , alongside remarkable stability for over 100 h. The enhanced mechanism was unraveled through in situ Raman spectroscopy and electrochemical impedance spectroscopy, which revealed accelerated reaction kinetics and facilitated structural evolution. Density functional theory calculations further verified that the oxygen vacancies effectively lower the energy barrier of the rate‐determining step. This work provides a scalable strategy for integrating bio‐inspired morphology and electronic modulation in high‐performance catalyst design for efficient water oxidation.
Synergistic Morphological and Electronic Engineering of NiFeOOH via Ultrafast Room Temperature Fabrication for Enhanced OER
Low‐cost, high‐performance oxygen evolution reaction (OER) catalysts are considered pivotal to enabling the industrial‐scale production of green hydrogen via water electrolysis. Herein, we report an ultrafast (30 s) room‐temperature approach to fabricating a biomimetic NiFeOOH electrocatalyst directly on nickel foam. The resulting material featuring a chloroplast‐inspired hierarchical nanosheet architecture and is enriched with oxygen vacancies. This unique design achieves exceptional OER activity, requiring an overpotential of only 260 mV to deliver 100 mA cm −2 , alongside remarkable stability for over 100 h. The enhanced mechanism was unraveled through in situ Raman spectroscopy and electrochemical impedance spectroscopy, which revealed accelerated reaction kinetics and facilitated structural evolution. Density functional theory calculations further verified that the oxygen vacancies effectively lower the energy barrier of the rate‐determining step. This work provides a scalable strategy for integrating bio‐inspired morphology and electronic modulation in high‐performance catalyst design for efficient water oxidation.
- 21 October 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 187
Tailoring metal single-atom catalysts via hydrogenation-induced reducibility in molybdenum trioxide
- 21 October 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 187
Tailoring metal single-atom catalysts via hydrogenation-induced reducibility in molybdenum trioxide
- 18 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (21) , 25045-25053
Pt Single Atoms and Clusters Supported on N-Doped Porous Carbon for Improved Hydrogen Evolution Reaction
- 18 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (21) , 25045-25053
Pt Single Atoms and Clusters Supported on N-Doped Porous Carbon for Improved Hydrogen Evolution Reaction
- 8 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (8) , 9403-9411
Silver-Decorated MoO3 as an Anode Material in Lithium-Ion Batteries
- 8 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (8) , 9403-9411
Silver-Decorated MoO3 as an Anode Material in Lithium-Ion Batteries
- 1 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 51, 701-708
Low-Pt-loading electrocatalyst derived from the reduction of hydrogenated MoO3 for highly efficient hydrogen evolution reaction
- 1 November 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 51, 701-708
Low-Pt-loading electrocatalyst derived from the reduction of hydrogenated MoO3 for highly efficient hydrogen evolution reaction
- Open Access
- 7 July 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (13) , 2025
Hierarchical-Structured Fe2O3 Anode with Exposed (001) Facet for Enhanced Lithium Storage Performance
The hierarchical structure is an ideal nanostructure for conversion-type anodes with drastic volume expansion. Here, we demonstrate a tin-doping strategy for constructing Fe2O3 brushes, in which nanowires with exposed (001) facets are stacked into the hierarchical structure. Thanks to the tin-doping, the conductivity of the Sn-doped Fe2O3 has been improved greatly. Moreover, the volume changes of the Sn-doped Fe2O3 anodes can be limited to ~4% vertical expansion and ~13% horizontal expansion, thus resulting in high-rate performance and long-life stability due to the exposed (001) facet and the unique hierarchical structure. As a result, it delivers a high reversible lithium storage capacity of 580 mAh/g at a current density of 0.2C (0.2 A/g), and excellent rate performance of above 400 mAh/g even at a high current density of 2C (2 A/g) over 500 cycles, which is much higher than most of the reported transition metal oxide anodes. This doping strategy and the unique hierarchical structures bring inspiration for nanostructure design of functional materials in energy storage.
- 7 July 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (13) , 2025
Open AccessHierarchical-Structured Fe2O3 Anode with Exposed (001) Facet for Enhanced Lithium Storage Performance
The hierarchical structure is an ideal nanostructure for conversion-type anodes with drastic volume expansion. Here, we demonstrate a tin-doping strategy for constructing Fe2O3 brushes, in which nanowires with exposed (001) facets are stacked into the hierarchical structure. Thanks to the tin-doping, the conductivity of the Sn-doped Fe2O3 has been improved greatly. Moreover, the volume changes of the Sn-doped Fe2O3 anodes can be limited to ~4% vertical expansion and ~13% horizontal expansion, thus resulting in high-rate performance and long-life stability due to the exposed (001) facet and the unique hierarchical structure. As a result, it delivers a high reversible lithium storage capacity of 580 mAh/g at a current density of 0.2C (0.2 A/g), and excellent rate performance of above 400 mAh/g even at a high current density of 2C (2 A/g) over 500 cycles, which is much higher than most of the reported transition metal oxide anodes. This doping strategy and the unique hierarchical structures bring inspiration for nanostructure design of functional materials in energy storage.
- Open Access
- 28 December 2022
- Published by MDPI AG in Nanomaterials
- Vol. 13 (1) , 142
The Ultrahigh Adsorption Capacity and Excellent Photocatalytic Degradation Activity of Mesoporous CuO with Novel Architecture
In this paper, mesoporous CuO with a novel architecture was synthesized through a conventional hydrothermal approach followed by a facile sintering procedure. HR-TEM analysis found that mesoporous CuO with an interconnected pore structure has exposed high-energy crystal planes of (002) and (200). Theoretical calculations indicated that the high-energy crystal planes have superior adsorption capacity for H+ ions, which is critical for the excellent adsorption and remarkable photocatalytic activity of the anionic dye. The adsorption capacity of CuO to methyl orange (MO) at 0.4 g/L was approximately 30% under adsorption equilibrium conditions. We propose a state-changing mechanism to analyze the synergy and mutual restraint relation among the catalyst CuO, H+ ions, dye and H2O2. According to this mechanism, the degradation rate of MO can be elevated 3.5 times only by regulating the MO ratio in three states.
- 28 December 2022
- Published by MDPI AG in Nanomaterials
- Vol. 13 (1) , 142
Open AccessThe Ultrahigh Adsorption Capacity and Excellent Photocatalytic Degradation Activity of Mesoporous CuO with Novel Architecture
In this paper, mesoporous CuO with a novel architecture was synthesized through a conventional hydrothermal approach followed by a facile sintering procedure. HR-TEM analysis found that mesoporous CuO with an interconnected pore structure has exposed high-energy crystal planes of (002) and (200). Theoretical calculations indicated that the high-energy crystal planes have superior adsorption capacity for H+ ions, which is critical for the excellent adsorption and remarkable photocatalytic activity of the anionic dye. The adsorption capacity of CuO to methyl orange (MO) at 0.4 g/L was approximately 30% under adsorption equilibrium conditions. We propose a state-changing mechanism to analyze the synergy and mutual restraint relation among the catalyst CuO, H+ ions, dye and H2O2. According to this mechanism, the degradation rate of MO can be elevated 3.5 times only by regulating the MO ratio in three states.
- 30 January 2022
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 17 (2) , e2747
Surface modification of graphite by low‐temperature oxygen plasma and SnO2-FeO(OH) coatings for lithium storage
Graphite powders are exfoliated by Li+/Na+ co‐intercalation to obtain exfoliated graphite, and then the surfaces are modified with oxygen‐containing functional groups by oxygen plasma etching to alter the chemical properties of surface. For advanced graphite anodes of lithium ions batteries, here fine‐structured SnO2FeO(OH) coatings are constructed on the oxidated surfaces of graphite by an electrostatic adsorption method. Electrochemical tests show that surface modified graphite has higher capacity and better rate performance than pristine graphite, and the specific discharge capacity is reached to 400 mAh g−1 at a current of 37.2 mA g−1 (0.1C), which is increased by 27.8% compared with the pristine graphite anode.
- 30 January 2022
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 17 (2) , e2747
Surface modification of graphite by low‐temperature oxygen plasma and SnO2-FeO(OH) coatings for lithium storage
Graphite powders are exfoliated by Li+/Na+ co‐intercalation to obtain exfoliated graphite, and then the surfaces are modified with oxygen‐containing functional groups by oxygen plasma etching to alter the chemical properties of surface. For advanced graphite anodes of lithium ions batteries, here fine‐structured SnO2FeO(OH) coatings are constructed on the oxidated surfaces of graphite by an electrostatic adsorption method. Electrochemical tests show that surface modified graphite has higher capacity and better rate performance than pristine graphite, and the specific discharge capacity is reached to 400 mAh g−1 at a current of 37.2 mA g−1 (0.1C), which is increased by 27.8% compared with the pristine graphite anode.