Magnus A. Haw
Magnus A. Haw has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Paul M. Bellan
California Institute of Technology
5 shared publications - Hui Li
Los Alamos National Laboratory
4 shared publications - Pakorn Wongwaitayakornkul
Applied Physics, California Institute of Technology, Pasadena, CA 91125, USA
4 shared publications - Byonghoon Seo
Embry‐Riddle Aeronautical University Daytona Beach FL USA
2 shared publications Kirk W. Madison
2 shared publicationsWill Gunton
2 shared publications
Latest Publications
- 1 November 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (11)
Design and implementation of a fast-sweeping Langmuir probe diagnostic for DC arc jet environments
Langmuir probe diagnostics are a cornerstone of plasma characterization, providing critical measurements of electron temperature, electron density, and plasma potential. However, conventional swept Langmuir probes and other traditional electrostatic probes often lack the temporal resolution necessary to capture transient plasma behavior in dynamic environments. This paper presents the design and implementation of a fast-sweeping Langmuir probe system that is open-source, low-cost, and adaptable for a wide range of plasma applications. The probe system incorporates voltage sweeping to resolve rapid fluctuations in plasma parameters at a temporal resolution of up to 200 kHz. To validate its performance, the system was implemented in the 30 kW miniature arc jet research chamber, a high-enthalpy DC arc jet facility designed for prototype testing and development. Experimental results demonstrate the probe’s capability to operate in extreme aerothermal conditions, providing time-resolved electron temperature and density along the flow’s radial profile. This study establishes a robust and accessible Langmuir diagnostic solution for researchers studying transient plasma behavior in high-enthalpy environments.
- 1 November 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (11)
Design and implementation of a fast-sweeping Langmuir probe diagnostic for DC arc jet environments
Langmuir probe diagnostics are a cornerstone of plasma characterization, providing critical measurements of electron temperature, electron density, and plasma potential. However, conventional swept Langmuir probes and other traditional electrostatic probes often lack the temporal resolution necessary to capture transient plasma behavior in dynamic environments. This paper presents the design and implementation of a fast-sweeping Langmuir probe system that is open-source, low-cost, and adaptable for a wide range of plasma applications. The probe system incorporates voltage sweeping to resolve rapid fluctuations in plasma parameters at a temporal resolution of up to 200 kHz. To validate its performance, the system was implemented in the 30 kW miniature arc jet research chamber, a high-enthalpy DC arc jet facility designed for prototype testing and development. Experimental results demonstrate the probe’s capability to operate in extreme aerothermal conditions, providing time-resolved electron temperature and density along the flow’s radial profile. This study establishes a robust and accessible Langmuir diagnostic solution for researchers studying transient plasma behavior in high-enthalpy environments.
- Open Access
- 1 February 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (2) , 022109
Determination of a macro- to micro-scale progression leading to a magnetized plasma disruption
We report the observations of a plasma jet evolving through a macro- to micro-scale progression sequence. This leads to a fast magnetic reconnection that results in the jet breaking off from its originating electrode and forming a force-free state. A sausage-like pinching occurs first and squeezes an initially fat, short magnetized jet so that it becomes thin. The thin jet then becomes kink unstable. The lengthening of the jet by the kinking thins the jet even more since the kink is an incompressible instability. When the jet radius becomes comparable to the ion-skin depth, Hall and electron inertial physics become important and establish the environment for a fast magnetic reconnection. This fast reconnection occurs, disrupting the jet and establishing a force-free state. X-ray bursts and whistler waves, evidence of a magnetic reconnection, are observed when the plasma jet breaks off from the electrode. This experimentally observed sequence of successive thinning from pinching followed by kinking is reproduced in a three-dimensional ideal Magnetohydrodynamic (MHD) numerical simulation. The results of the experiment and the numerical simulation, together demonstrate a viable path from macro-scale MHD physics to micro-scale non-MHD physics where fast reconnection occurs.
- 1 February 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (2) , 022109
Open AccessDetermination of a macro- to micro-scale progression leading to a magnetized plasma disruption
We report the observations of a plasma jet evolving through a macro- to micro-scale progression sequence. This leads to a fast magnetic reconnection that results in the jet breaking off from its originating electrode and forming a force-free state. A sausage-like pinching occurs first and squeezes an initially fat, short magnetized jet so that it becomes thin. The thin jet then becomes kink unstable. The lengthening of the jet by the kinking thins the jet even more since the kink is an incompressible instability. When the jet radius becomes comparable to the ion-skin depth, Hall and electron inertial physics become important and establish the environment for a fast magnetic reconnection. This fast reconnection occurs, disrupting the jet and establishing a force-free state. X-ray bursts and whistler waves, evidence of a magnetic reconnection, are observed when the plasma jet breaks off from the electrode. This experimentally observed sequence of successive thinning from pinching followed by kinking is reproduced in a three-dimensional ideal Magnetohydrodynamic (MHD) numerical simulation. The results of the experiment and the numerical simulation, together demonstrate a viable path from macro-scale MHD physics to micro-scale non-MHD physics where fast reconnection occurs.
- Open Access
- 16 July 2019
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 46 (13) , 7105-7112
Laboratory Measurement of Large‐Amplitude Whistler Pulses Generated by Fast Magnetic Reconnection
We present observations of large‐amplitude (δB/B∼ 0.01) oblique whistler wave pulses generated by a spontaneous, 3‐D localized magnetic reconnection event in the Caltech jet experiment. The wave pulses are measured more than 50 ion skin depths from the reconnection location by a tetrahedron array of three‐axis B‐dot probes that mimic the pyramid flight formations of the Cluster and Magnetospheric Multiscale Mission spacecraft. Measurements of background parameters, wave polarization, and wave dispersion confirm that the pulses are whistler modes. These results demonstrate that localized impulsive reconnection events can generate large‐amplitude, oblique whistler wave pulses that propagate far outside the reconnection region. This provides a new pathway for the generation of magnetospheric whistler pulses and may help explain relativistic particle acceleration in phenomena such as solar flares that incorporate 3‐D localized impulsive magnetic reconnection.
- 16 July 2019
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 46 (13) , 7105-7112
Open AccessLaboratory Measurement of Large‐Amplitude Whistler Pulses Generated by Fast Magnetic Reconnection
We present observations of large‐amplitude (δB/B∼ 0.01) oblique whistler wave pulses generated by a spontaneous, 3‐D localized magnetic reconnection event in the Caltech jet experiment. The wave pulses are measured more than 50 ion skin depths from the reconnection location by a tetrahedron array of three‐axis B‐dot probes that mimic the pyramid flight formations of the Cluster and Magnetospheric Multiscale Mission spacecraft. Measurements of background parameters, wave polarization, and wave dispersion confirm that the pulses are whistler modes. These results demonstrate that localized impulsive reconnection events can generate large‐amplitude, oblique whistler wave pulses that propagate far outside the reconnection region. This provides a new pathway for the generation of magnetospheric whistler pulses and may help explain relativistic particle acceleration in phenomena such as solar flares that incorporate 3‐D localized impulsive magnetic reconnection.
- 1 April 2019
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 874 (2) , 137
Magnetically Induced Current Piston for Generating Extreme-ultraviolet Fronts in the Solar Corona
Single-pulse, globally propagating coronal fronts, called Extreme-ultraviolet (EUV) waves, were first observed in 1995 by the Extreme-ultraviolet Imaging Telescope and every observed EUV wave since has been associated with a coronal mass ejection (CME). The physical mechanism underlying these waves has been debated for two decades with wave or pseudo-wave theories being advocated. We propose a hybrid model where EUV waves are compressional fronts driven by a reverse electric current layer induced by the time-dependent CME core current. The reverse current layer flows in a direction opposite to the CME core current and is an eddy current layer necessary to maintain magnetic flux conservation above the layer. Repelled by the core current, the reverse current layer accelerates upward so it acts as a piston that drives a compressional perturbation in the coronal regions above. Given a sufficiently fast piston speed, the compressional perturbation becomes a shock that separates from the piston when the piston slows down. Since the model relates the motion of the EUV front to CME properties, the model provides a bound for the core current of an erupting CME. The model is supported and motivated by detailed results from both laboratory experiments and ideal 3D magnetohydrodynamic simulations. Overlaps and differences with other models and spacecraft observations are discussed.
- 1 April 2019
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 874 (2) , 137
Magnetically Induced Current Piston for Generating Extreme-ultraviolet Fronts in the Solar Corona
Single-pulse, globally propagating coronal fronts, called Extreme-ultraviolet (EUV) waves, were first observed in 1995 by the Extreme-ultraviolet Imaging Telescope and every observed EUV wave since has been associated with a coronal mass ejection (CME). The physical mechanism underlying these waves has been debated for two decades with wave or pseudo-wave theories being advocated. We propose a hybrid model where EUV waves are compressional fronts driven by a reverse electric current layer induced by the time-dependent CME core current. The reverse current layer flows in a direction opposite to the CME core current and is an eddy current layer necessary to maintain magnetic flux conservation above the layer. Repelled by the core current, the reverse current layer accelerates upward so it acts as a piston that drives a compressional perturbation in the coronal regions above. Given a sufficiently fast piston speed, the compressional perturbation becomes a shock that separates from the piston when the piston slows down. Since the model relates the motion of the EUV front to CME properties, the model provides a bound for the core current of an erupting CME. The model is supported and motivated by detailed results from both laboratory experiments and ideal 3D magnetohydrodynamic simulations. Overlaps and differences with other models and spacecraft observations are discussed.
- 31 July 2018
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 862 (2) , L15
Reverse Current Model for Coronal Mass Ejection Cavity Formation
We report here a new model for explaining the three-part structure of coronal mass ejections (CMEs). The model proposes that the cavity in a CME forms because a rising electric current in the core prominence induces an oppositely directed electric current in the background plasma; this eddy current is required to satisfy the frozen-in magnetic flux condition in the background plasma. The magnetic force between the inner-core electric current and the oppositely directed induced eddy current propels the background plasma away from the core, creating a cavity and a density pileup at the cavity edge. The cavity radius saturates when an inward restoring force from magnetic and hydrodynamic pressure in the region outside the cavity edge balances the outward magnetic force. The model is supported by (i) laboratory experiments showing the development of a cavity as a result of the repulsion of an induced reverse current by a rising inner-core flux-rope current, (ii) 3D numerical magnetohydrodynamic (MHD) simulations that reproduce the laboratory experiments in quantitative detail, and (iii) an analytic model that describes cavity formation as a result of the plasma containing the induced reverse current being repelled from the inner core. This analytic model has broad applicability because the predicted cavity widths are relatively independent of both the current injection mechanism and the injection timescale.
- 31 July 2018
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 862 (2) , L15
Reverse Current Model for Coronal Mass Ejection Cavity Formation
We report here a new model for explaining the three-part structure of coronal mass ejections (CMEs). The model proposes that the cavity in a CME forms because a rising electric current in the core prominence induces an oppositely directed electric current in the background plasma; this eddy current is required to satisfy the frozen-in magnetic flux condition in the background plasma. The magnetic force between the inner-core electric current and the oppositely directed induced eddy current propels the background plasma away from the core, creating a cavity and a density pileup at the cavity edge. The cavity radius saturates when an inward restoring force from magnetic and hydrodynamic pressure in the region outside the cavity edge balances the outward magnetic force. The model is supported by (i) laboratory experiments showing the development of a cavity as a result of the repulsion of an induced reverse current by a rising inner-core flux-rope current, (ii) 3D numerical magnetohydrodynamic (MHD) simulations that reproduce the laboratory experiments in quantitative detail, and (iii) an analytic model that describes cavity formation as a result of the plasma containing the induced reverse current being repelled from the inner core. This analytic model has broad applicability because the predicted cavity widths are relatively independent of both the current injection mechanism and the injection timescale.
- 17 October 2017
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 848 (2) , 89
Apex Dips of Experimental Flux Ropes: Helix or Cusp?
We present a new theory for the presence of apex dips in certain experimental flux ropes. Previously such dips were thought to be projections of a helical loop axis generated by the kink instability. However, new evidence from experiments and simulations suggest that the feature is a 2D cusp rather than a 3D helix. The proposed mechanism for cusp formation is a density pileup region generated by nonlinear interaction of neutral gas cones emitted from fast-gas nozzles. The results indicate that density perturbations can result in large distortions of an erupting flux rope, even in the absence of significant pressure or gravitational forces. The density pileup at the apex also suppresses the m = 1 kink mode by acting as a stationary node. Consequently, more accurate density profiles should be considered when attempting to model the stability and shape of solar and astrophysical flux ropes.
- 17 October 2017
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 848 (2) , 89
Apex Dips of Experimental Flux Ropes: Helix or Cusp?
We present a new theory for the presence of apex dips in certain experimental flux ropes. Previously such dips were thought to be projections of a helical loop axis generated by the kink instability. However, new evidence from experiments and simulations suggest that the feature is a 2D cusp rather than a 3D helix. The proposed mechanism for cusp formation is a density pileup region generated by nonlinear interaction of neutral gas cones emitted from fast-gas nozzles. The results indicate that density perturbations can result in large distortions of an erupting flux rope, even in the absence of significant pressure or gravitational forces. The density pileup at the apex also suppresses the m = 1 kink mode by acting as a stationary node. Consequently, more accurate density profiles should be considered when attempting to model the stability and shape of solar and astrophysical flux ropes.
- Open Access
- 4 October 2017
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 44 (19) , 9525-9531
MHD Collimation Mechanism in Arched Flux Ropes Characterized Using Volumetric, Time‐Dependent B‐Vector Measurements
Laboratory measurements of B(x,t) in a volume enclosing portions of two arched flux ropes show flux rope collimation driven by gradients in axial current density. These measurements verify the three predictions of a proposed MHD collimation mechanism: (1) axial magnetic forces exist in current channels with spatially varying minor radius, (2) these forces can drive counterpropagating axial flows, and (3) this process collimates the flux rope. This mechanism may explain the axial uniformity of solar loops and is relevant to other systems with current channels of varying minor radius such as solar prominences and astrophysical jets.
- 4 October 2017
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 44 (19) , 9525-9531
Open AccessMHD Collimation Mechanism in Arched Flux Ropes Characterized Using Volumetric, Time‐Dependent B‐Vector Measurements
Laboratory measurements of B(x,t) in a volume enclosing portions of two arched flux ropes show flux rope collimation driven by gradients in axial current density. These measurements verify the three predictions of a proposed MHD collimation mechanism: (1) axial magnetic forces exist in current channels with spatially varying minor radius, (2) these forces can drive counterpropagating axial flows, and (3) this process collimates the flux rope. This mechanism may explain the axial uniformity of solar loops and is relevant to other systems with current channels of varying minor radius such as solar prominences and astrophysical jets.
- 1 April 2015
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 86 (4) , 043506
1D fast coded aperture camera
A fast (100 MHz) 1D coded aperture visible light camera has been developed as a prototype for imaging plasma experiments in the EUV/X-ray bands. The system uses printed patterns on transparency sheets as the masked aperture and an 80 channel photodiode array (9 V reverse bias) as the detector. In the low signal limit, the system has demonstrated 40-fold increase in throughput and a signal-to-noise gain of ≈7 over that of a pinhole camera of equivalent parameters. In its present iteration, the camera can only image visible light; however, the only modifications needed to make the system EUV/X-ray sensitive are to acquire appropriate EUV/X-ray photodiodes and to machine a metal masked aperture.
- 1 April 2015
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 86 (4) , 043506
1D fast coded aperture camera
A fast (100 MHz) 1D coded aperture visible light camera has been developed as a prototype for imaging plasma experiments in the EUV/X-ray bands. The system uses printed patterns on transparency sheets as the masked aperture and an 80 channel photodiode array (9 V reverse bias) as the detector. In the low signal limit, the system has demonstrated 40-fold increase in throughput and a signal-to-noise gain of ≈7 over that of a pinhole camera of equivalent parameters. In its present iteration, the camera can only image visible light; however, the only modifications needed to make the system EUV/X-ray sensitive are to acquire appropriate EUV/X-ray photodiodes and to machine a metal masked aperture.
- 9 May 2013
- Published by American Physical Society (APS) in Physical Review A
- Vol. 87 (5)
High-resolution photoassociation spectroscopy of theListateWe present experimental observations of seven vibrational levels, ${v}^{$'${}}=20$\char21{}26, of the ${1}^{3}{$\Sigma${}}_{g}^{+}$ excited state of Li${}_{2}$ molecules by the photoassociation (PA) of a degenerate Fermi gas of ${}^{6}$Li atoms. For each vibrational level, we resolve the rotational structure using a Feshbach resonance to enhance the PA rates from $p$-wave collisions. We also determine the spin-spin and spin-rotation interaction constants for this state. The absolute uncertainty of our measurements is $\ifmmode\pm\else\textpm\fi{}0.00002$ cm${}^{$-${}1}$ ($\ifmmode\pm\else\textpm\fi{}600$~kHz). We use this data to further refine an analytic potential for this state.- 9 May 2013
- Published by American Physical Society (APS) in Physical Review A
- Vol. 87 (5)
High-resolution photoassociation spectroscopy of theListateWe present experimental observations of seven vibrational levels, ${v}^{$'${}}=20$\char21{}26, of the ${1}^{3}{$\Sigma${}}_{g}^{+}$ excited state of Li${}_{2}$ molecules by the photoassociation (PA) of a degenerate Fermi gas of ${}^{6}$Li atoms. For each vibrational level, we resolve the rotational structure using a Feshbach resonance to enhance the PA rates from $p$-wave collisions. We also determine the spin-spin and spin-rotation interaction constants for this state. The absolute uncertainty of our measurements is $\ifmmode\pm\else\textpm\fi{}0.00002$ cm${}^{$-${}1}$ ($\ifmmode\pm\else\textpm\fi{}600$~kHz). We use this data to further refine an analytic potential for this state.- 28 February 2012
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 29 (3) , 475-483
Magneto-optical trap loading rate dependence on trap depth and vapor density
We study the dependence of the particle loading rate of a rubidium vapor cell magneto-optic trap (MOT). Using a trap depth determination of the MOT that relies on measurements of loss rates during optical excitation of colliding atoms to a repulsive molecular state, we experimentally determine the MOT escape velocity and show that the loading rate scales with escape velocity to the fourth power, or, equivalently, with the square of the trap depth. We also demonstrate that the loading rate is directly proportional to the background rubidium density. We thus experimentally confirm the loading rate model used in the literature since the invention of the MOT. In addition to confirming this long-standing conjecture, we show that the loading rate dependence can be used to reliably infer the trap depth and to tune the relative depth of a MOT (i.e., capture and escape velocities) when the background density is held fixed. The measurements have allowed an experimental determination of the relationship between capture and escape velocities in our MOTs of .- 28 February 2012
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 29 (3) , 475-483
Magneto-optical trap loading rate dependence on trap depth and vapor density
We study the dependence of the particle loading rate of a rubidium vapor cell magneto-optic trap (MOT). Using a trap depth determination of the MOT that relies on measurements of loss rates during optical excitation of colliding atoms to a repulsive molecular state, we experimentally determine the MOT escape velocity and show that the loading rate scales with escape velocity to the fourth power, or, equivalently, with the square of the trap depth. We also demonstrate that the loading rate is directly proportional to the background rubidium density. We thus experimentally confirm the loading rate model used in the literature since the invention of the MOT. In addition to confirming this long-standing conjecture, we show that the loading rate dependence can be used to reliably infer the trap depth and to tune the relative depth of a MOT (i.e., capture and escape velocities) when the background density is held fixed. The measurements have allowed an experimental determination of the relationship between capture and escape velocities in our MOTs of .