I.-Wen Peter Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
I.-Wen Peter Chen has a total of 117 co-authors. Here are the top co-authors by number of shared publications:
Anil A. Kashale
7 shared publicationsChien-Wei Wu
Department of Chemistry, National Taiwan University, No. 1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan
4 shared publicationsJeremiah Hao Ran Huang
Department of Chemistry, National Cheng Kung University, No. 1, University Road, East District, Tainan 701, Taiwan
4 shared publicationsFei-Chien Hsu
Department of Applied Science, National Taitung University, 369, Sec. 2, University Rd., Taitung City, 95092, Taiwan
3 shared publicationsSheng-Hong Saint Jhou
Department of Applied Science, National Taitung University, Taitung City 95002, Taiwan
3 shared publicationsYi-Wen Chen
χ-Dimension Centre for Medical Research and Translation, China Medical University Hospital, 2 Tuh-Der Road, Taichung City, 40447, Taiwan
3 shared publications
Latest Publications
Ligand π‐Conjugation Area Modulates Hydrogen Evolution Performance in Metal–Organic Frameworks
Metal–organic frameworks (MOFs) combine permanent porosity, tunable compositions, ordered structures, and well‐defined coordination environments, making them versatile platforms for electrocatalyst design. Although ligand engineering has been widely explored for the hydrogen evolution reaction (HER), few studies have treated ligand π‐conjugation area as a defined molecular variable and systematically examined its relationship with HER performance. Here, we use a conjugated‐ligand engineering strategy to systematically vary ligand π‐conjugation area while maintaining comparable metal coordination environments. Pyromellitic dianhydride (PMDA), naphthalene‐1,4,5,8‐tetracarboxylic dianhydride (NTDA), and perylene‐3,4,9,10‐tetracarboxylic dianhydride (PTCDA), featuring benzene‐, naphthalene‐, and perylene‐based aromatic cores with 6, 10, and 20 π electrons, respectively, are used as precursors to the corresponding tetracarboxylate ligands to construct related Ni‐ and Co‐based MOFs with six‐coordinate metal centers. Across both metal series, increasing ligand π‐conjugation area consistently lowers overpotentials and Tafel slopes, decreases charge‐transfer resistance and mass‐transport‐related impedance, and increases electrochemically active surface area. This systematic ligand variation is accompanied by metal‐center binding‐energy shifts and bandgap narrowing. These results establish a clear structure–performance relationship between ligand π‐conjugation area and HER performance across the investigated MOF series, highlighting conjugated‐ligand engineering as an effective strategy for MOF electrocatalyst design.
Ligand π‐Conjugation Area Modulates Hydrogen Evolution Performance in Metal–Organic Frameworks
Metal–organic frameworks (MOFs) combine permanent porosity, tunable compositions, ordered structures, and well‐defined coordination environments, making them versatile platforms for electrocatalyst design. Although ligand engineering has been widely explored for the hydrogen evolution reaction (HER), few studies have treated ligand π‐conjugation area as a defined molecular variable and systematically examined its relationship with HER performance. Here, we use a conjugated‐ligand engineering strategy to systematically vary ligand π‐conjugation area while maintaining comparable metal coordination environments. Pyromellitic dianhydride (PMDA), naphthalene‐1,4,5,8‐tetracarboxylic dianhydride (NTDA), and perylene‐3,4,9,10‐tetracarboxylic dianhydride (PTCDA), featuring benzene‐, naphthalene‐, and perylene‐based aromatic cores with 6, 10, and 20 π electrons, respectively, are used as precursors to the corresponding tetracarboxylate ligands to construct related Ni‐ and Co‐based MOFs with six‐coordinate metal centers. Across both metal series, increasing ligand π‐conjugation area consistently lowers overpotentials and Tafel slopes, decreases charge‐transfer resistance and mass‐transport‐related impedance, and increases electrochemically active surface area. This systematic ligand variation is accompanied by metal‐center binding‐energy shifts and bandgap narrowing. These results establish a clear structure–performance relationship between ligand π‐conjugation area and HER performance across the investigated MOF series, highlighting conjugated‐ligand engineering as an effective strategy for MOF electrocatalyst design.
- Open Access
- 21 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (39) , 17534-17545
Redox-Tuned Ce-MOF Phosphides as Efficient Electrocatalysts for Anion Exchange Membrane Water Electrolysis
Designing efficient and durable platinum-group-metal-free electrocatalysts is crucial for advancing anion-exchange membrane water electrolysis (AEMWE) toward practical green hydrogen production. Herein, we report a binder-free cerium-based metal−organic framework (Ce-MOF) electrode that is transformed into a porous phosphide-derived electrocatalyst through a simple phosphidation strategy while preserving the parent MOF architecture on nickel foam. The robust Ce−O coordination network formed between Ce ions and benzene-1,3,5-tricarboxylic acid (BTC) effectively maintains the structural integrity and hierarchical porosity of the framework during phosphidation, thereby retaining abundant accessible active sites. Meanwhile, the reversible Ce3+/Ce4+ redox couple acts as an intrinsic electron reservoir to promote charge transfer, whereas phosphorus incorporation simultaneously enhances electrical conductivity and tailors the local electronic structure, resulting in synergistically improved electrocatalytic activity. Consequently, the optimized Ce-BTC-P300 electrode exhibits outstanding bifunctional performance, requiring overpotentials of only 340 mV for the oxygen evolution reaction (OER) and 231 mV for the hydrogen evolution reaction (HER) to achieve an industrially relevant current density of 100 mA cm−1 in 1 M KOH. The electrode also demonstrates excellent durability, retaining more than 98% of its initial activity after 80 h for the OER and 100 h for the HER. When employed as both the anode and cathode in an AEMWE device, the catalyst delivers a high current density of 1 A cm−2 at a low cell voltage of 2.04 V under ambient conditions while maintaining stable long-term operation. This work establishes a rare-earth MOF-derived phosphidation strategy that integrates intrinsic redox buffering, robust structural stability, and enhanced electronic conductivity into a single catalyst platform, providing new insights into the rational design of high-performance, platinum-group-metal-free bifunctional electrocatalysts for practical alkaline water electrolysis.
- 21 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (39) , 17534-17545
Open AccessRedox-Tuned Ce-MOF Phosphides as Efficient Electrocatalysts for Anion Exchange Membrane Water Electrolysis
Designing efficient and durable platinum-group-metal-free electrocatalysts is crucial for advancing anion-exchange membrane water electrolysis (AEMWE) toward practical green hydrogen production. Herein, we report a binder-free cerium-based metal−organic framework (Ce-MOF) electrode that is transformed into a porous phosphide-derived electrocatalyst through a simple phosphidation strategy while preserving the parent MOF architecture on nickel foam. The robust Ce−O coordination network formed between Ce ions and benzene-1,3,5-tricarboxylic acid (BTC) effectively maintains the structural integrity and hierarchical porosity of the framework during phosphidation, thereby retaining abundant accessible active sites. Meanwhile, the reversible Ce3+/Ce4+ redox couple acts as an intrinsic electron reservoir to promote charge transfer, whereas phosphorus incorporation simultaneously enhances electrical conductivity and tailors the local electronic structure, resulting in synergistically improved electrocatalytic activity. Consequently, the optimized Ce-BTC-P300 electrode exhibits outstanding bifunctional performance, requiring overpotentials of only 340 mV for the oxygen evolution reaction (OER) and 231 mV for the hydrogen evolution reaction (HER) to achieve an industrially relevant current density of 100 mA cm−1 in 1 M KOH. The electrode also demonstrates excellent durability, retaining more than 98% of its initial activity after 80 h for the OER and 100 h for the HER. When employed as both the anode and cathode in an AEMWE device, the catalyst delivers a high current density of 1 A cm−2 at a low cell voltage of 2.04 V under ambient conditions while maintaining stable long-term operation. This work establishes a rare-earth MOF-derived phosphidation strategy that integrates intrinsic redox buffering, robust structural stability, and enhanced electronic conductivity into a single catalyst platform, providing new insights into the rational design of high-performance, platinum-group-metal-free bifunctional electrocatalysts for practical alkaline water electrolysis.
- Open Access
- 31 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (15) , 5733-5740
Visible Light-Responsive Bimetallic Mo 2 TiC 2 MXenes for Enhanced Hydrogen Evolution Performance
- 31 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (15) , 5733-5740
Open AccessVisible Light-Responsive Bimetallic Mo 2 TiC 2 MXenes for Enhanced Hydrogen Evolution Performance
- Open Access
- 26 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (13) , 19860-19872
Free-Standing Boron-Doped Graphene Hydrogel Buckypaper Fabricated via Zinc-Plate Reduction for High-Performance Supercapacitors
Graphene offers exceptional mechanical flexibility and superior electrical conductivity that are highly desirable for next-generation supercapacitors; however, its intrinsic strong π-π stacking interactions severely hinder energy-storage performance by blocking active redox sites and restricting ion-accessible pathways. To address these limitations, we developed a binder-free, free-standing, boron-doped graphene hydrogel buckypaper with a hierarchical architecture. In this study, a mixed suspension of thermally activated boron-doped expanded graphene (BT-rGO) and graphene oxide (GO) was integrated via a redox reaction using a Zn plate as a substrate, enabling the instantaneous fabrication of a free-standing BT-rGO/Zn-rGO hydrogel buckypaper. The boron-doped graphene framework exhibits enhanced wettability, facilitating efficient electrolyte ion transportation, while the heteroatom-induced uneven charge distribution modulates the local electronegativity and improves electroconductivity throughout the free-standing hydrogel buckypaper network. The electrochemically enhanced E-BT-rGO3/Zn-rGO1 hydrogel buckypaper (BT-rGO:GO mass ratio = 3:1) delivers a high specific capacitance of 443.63 F g-1 at 2 mA cm-2 and maintains 88% capacitance retention after 10,000 cycles at 50 mA cm-2. Moreover, a flexible solid-state supercapacitor assembled from the BT-rGO3/Zn-rGO1 hydrogel buckypaper achieves an energy density of 16.96 Wh kg-1 and a power density of 5.21 kW kg-1, demonstrating its practical applicability for powering LED lightbulbs. Hence, the binder-free strategy creates a mechanically robust, porous framework with fully accessible ion pathways, delivering a purely carbon-based, metal-oxide-free electrode platform with an exceptional electrochemical performance.
- 26 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (13) , 19860-19872
Open AccessFree-Standing Boron-Doped Graphene Hydrogel Buckypaper Fabricated via Zinc-Plate Reduction for High-Performance Supercapacitors
Graphene offers exceptional mechanical flexibility and superior electrical conductivity that are highly desirable for next-generation supercapacitors; however, its intrinsic strong π-π stacking interactions severely hinder energy-storage performance by blocking active redox sites and restricting ion-accessible pathways. To address these limitations, we developed a binder-free, free-standing, boron-doped graphene hydrogel buckypaper with a hierarchical architecture. In this study, a mixed suspension of thermally activated boron-doped expanded graphene (BT-rGO) and graphene oxide (GO) was integrated via a redox reaction using a Zn plate as a substrate, enabling the instantaneous fabrication of a free-standing BT-rGO/Zn-rGO hydrogel buckypaper. The boron-doped graphene framework exhibits enhanced wettability, facilitating efficient electrolyte ion transportation, while the heteroatom-induced uneven charge distribution modulates the local electronegativity and improves electroconductivity throughout the free-standing hydrogel buckypaper network. The electrochemically enhanced E-BT-rGO3/Zn-rGO1 hydrogel buckypaper (BT-rGO:GO mass ratio = 3:1) delivers a high specific capacitance of 443.63 F g-1 at 2 mA cm-2 and maintains 88% capacitance retention after 10,000 cycles at 50 mA cm-2. Moreover, a flexible solid-state supercapacitor assembled from the BT-rGO3/Zn-rGO1 hydrogel buckypaper achieves an energy density of 16.96 Wh kg-1 and a power density of 5.21 kW kg-1, demonstrating its practical applicability for powering LED lightbulbs. Hence, the binder-free strategy creates a mechanically robust, porous framework with fully accessible ion pathways, delivering a purely carbon-based, metal-oxide-free electrode platform with an exceptional electrochemical performance.
- 27 February 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (21) , 5904-5908
Revealing the platinum single-atom anchoring mechanism through sequential surface engineering in Mo 2 TiC 2 T x MXene
A tunable electroreduction strategy enables sequential surface engineering of Mo2TiC2Tx MXene, identifying Mo atomic vacancies as the primary anchoring sites for Pt single atoms. This work establishes vacancy-directed MXene functionalization as an effective platform for single-atom catalysis.
- 27 February 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (21) , 5904-5908
Revealing the platinum single-atom anchoring mechanism through sequential surface engineering in Mo 2 TiC 2 T x MXene
A tunable electroreduction strategy enables sequential surface engineering of Mo2TiC2Tx MXene, identifying Mo atomic vacancies as the primary anchoring sites for Pt single atoms. This work establishes vacancy-directed MXene functionalization as an effective platform for single-atom catalysis.
- Open Access
- 1 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (2) , 1295-1306
In-Situ Monitoring of Charge Storage Mechanism from Ti 3 C 2 T x MXene Nanostructures via Ionic Liquid Etching and Intercalation
- 1 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (2) , 1295-1306
Open AccessIn-Situ Monitoring of Charge Storage Mechanism from Ti 3 C 2 T x MXene Nanostructures via Ionic Liquid Etching and Intercalation
Real‐Time Monitoring of Fe‐Induced Stable γ‐NiOOH in Binder‐Free FeNi MOF Electrocatalysts for Enhanced Oxygen Evolution
Hydrogen energy is a promising renewable source, and metal‐organic frameworks (MOFs) are considered potential electrocatalysts for water electrolysis due to their abundant active sites, high porosity, and large surface area. The synthesis of bimetallic iron‐nickel‐benzene‐1,3,5‐tricarboxylate/nickel foam (FeNi‐BTC/NF) MOF is reported using a binder‐free one‐pot method by immersing nickel foam (NF) into a solution of benzene‐1,3,5‐tricarboxylic acid (BTC), N,N‐dimethylformamide (DMF), and iron (Fe) salts. FeNi‐BTC/NF exhibits a low overpotential of 276 mV at 100 mA cm − 2 , a Tafel slope of 94 mV dec −1 , and stability exceeding 120 h. The Fe‐Ni interaction facilitates the formation of a stable gamma‐nickel oxyhydroxide (γ‐NiOOH) phase, preventing its reversion to nickel hydroxyide (Ni(OH)₂), which is crucial for improving oxygen evolution reaction (OER) performance. This phase transition, revealed via in situ Raman spectroelectrochemical analysis, enhances electrocatalytic activity. Additionally, high‐valent Fe modulates the electronic structure of Ni, enabling FeNi‐BTC/NF to transform into γ‐NiOOH at higher potentials, with Fe and γ‐NiOOH synergistically boosting OER efficiency. The findings offer insights into Fe/Ni atom interactions and phase transformations in FeNi‐BTC/NF MOFs for enhanced water splitting.
Real‐Time Monitoring of Fe‐Induced Stable γ‐NiOOH in Binder‐Free FeNi MOF Electrocatalysts for Enhanced Oxygen Evolution
Hydrogen energy is a promising renewable source, and metal‐organic frameworks (MOFs) are considered potential electrocatalysts for water electrolysis due to their abundant active sites, high porosity, and large surface area. The synthesis of bimetallic iron‐nickel‐benzene‐1,3,5‐tricarboxylate/nickel foam (FeNi‐BTC/NF) MOF is reported using a binder‐free one‐pot method by immersing nickel foam (NF) into a solution of benzene‐1,3,5‐tricarboxylic acid (BTC), N,N‐dimethylformamide (DMF), and iron (Fe) salts. FeNi‐BTC/NF exhibits a low overpotential of 276 mV at 100 mA cm − 2 , a Tafel slope of 94 mV dec −1 , and stability exceeding 120 h. The Fe‐Ni interaction facilitates the formation of a stable gamma‐nickel oxyhydroxide (γ‐NiOOH) phase, preventing its reversion to nickel hydroxyide (Ni(OH)₂), which is crucial for improving oxygen evolution reaction (OER) performance. This phase transition, revealed via in situ Raman spectroelectrochemical analysis, enhances electrocatalytic activity. Additionally, high‐valent Fe modulates the electronic structure of Ni, enabling FeNi‐BTC/NF to transform into γ‐NiOOH at higher potentials, with Fe and γ‐NiOOH synergistically boosting OER efficiency. The findings offer insights into Fe/Ni atom interactions and phase transformations in FeNi‐BTC/NF MOFs for enhanced water splitting.
- Open Access
- 27 December 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (1) , 333-338
Vapor-Assisted In Situ Synthesis of the Nb2CTxNS/NbO2F MXene Heterostructure for Enhanced Solar-Driven Photoelectrochemical Performance
Photocatalytic water splitting holds great potential for transforming solar energy into valuable chemical products. However, obstacles such as the rapid recombination of electron-hole pairs and insufficiently active surface areas of photocatalysts remain significant challenges. In this study, we present the first demonstration that lithium bis(trifluoromethanesulfonyl)imide vapor successfully etches aluminum from Nb2AlC MAX phase powders while concurrently forming NbO2F anchors on Nb2CTx nanosheet (Nb2CTxNS) MXene, leading to the in situ formation of a Nb2CTxNS/NbO2F heterostructure composite. This novel material exhibits a remarkable photoelectrochemical performance, achieving a current density of 252 μA cm-2, which is 1000 and 10 times greater than those of Nb2AlC MAX and Nb2C nanosheet MXene, respectively. These findings shed light on innovative approaches for developing photocatalytic materials via vapor-assisted synthesis, offering a promising pathway for advancing material discovery in both photo- and energy-related fields.
- 27 December 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (1) , 333-338
Open AccessVapor-Assisted In Situ Synthesis of the Nb2CTxNS/NbO2F MXene Heterostructure for Enhanced Solar-Driven Photoelectrochemical Performance
Photocatalytic water splitting holds great potential for transforming solar energy into valuable chemical products. However, obstacles such as the rapid recombination of electron-hole pairs and insufficiently active surface areas of photocatalysts remain significant challenges. In this study, we present the first demonstration that lithium bis(trifluoromethanesulfonyl)imide vapor successfully etches aluminum from Nb2AlC MAX phase powders while concurrently forming NbO2F anchors on Nb2CTx nanosheet (Nb2CTxNS) MXene, leading to the in situ formation of a Nb2CTxNS/NbO2F heterostructure composite. This novel material exhibits a remarkable photoelectrochemical performance, achieving a current density of 252 μA cm-2, which is 1000 and 10 times greater than those of Nb2AlC MAX and Nb2C nanosheet MXene, respectively. These findings shed light on innovative approaches for developing photocatalytic materials via vapor-assisted synthesis, offering a promising pathway for advancing material discovery in both photo- and energy-related fields.