Troy Dougherty
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Troy Dougherty has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- James H. Johnston
School of Chemical and Physical Sciences
1 shared publication Jeremie Barrel
1 shared publicationKarnika De Silva
NZ Product Accelerator, University of Auckland, Auckland, New Zealand
1 shared publication- Kenneth J. D. MacKenzie
Macdiarmid Institute for Advanced Materials and Nanotechnology, Victoria University of Wellington, New Zealand
1 shared publication - Matilda R. Hayward
School of Chemical and Physical Sciences, Victoria University of Wellington, Wellington, New Zealand
1 shared publication - Richard Thornton Baker
EaStCHEM, School of Chemistry, University of St Andrews, North Haugh, St Andrews, Fife KY16 9ST, UK
1 shared publication
Latest Publications
- Open Access
- 9 April 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (8) , 651
Ordered Mesoporous Ceria and Cerium Gadolinium Oxide Prepared by Vacuum-Assisted Nanocasting
Four ceria-based mesoporous oxide materials were prepared using a new vacuum impregnation (VI) templating method developed by the authors, namely, vacuum-assisted nanocasting (VAN). Two hard templates (SBA-15 and KIT-6) were employed, and products with compositions CeO2 and Ce0.9Gd0.1O1.9 (CGO) were made with each. The desired fluorite phase and composition were confirmed by powder XRD and EDS. The product structures were characterised by XRD, TEM, gas physisorption and SAXS. All products contained ordered mesoporous material in high yields. The specific surface areas (SSAs) and pore volumes of the products were determined to be high and the pore size and pore spacings related well to the templates from which the materials were synthesised. The TEM studies confirmed that the samples had a 3D pore structure, with this being the negative of the original template. The target materials were not only produced in high yields, but also displayed a porous single-crystal morphology with non-linear lattice planes. The highest SSA values and pore volumes were reported for materials impregnated using the KIT-6 template and with the CGO composition. The results suggest that VAN is an excellent and reproducible method for producing ordered mesoporous cerias and has considerable potential for wider application. All the mesoporous products showed dramatically increased reducibility in TPR experiments compared with a high-SSA nanoparticulate ceria reference. This is very promising for their potential applications in oxidation catalysts and in fuel cell components.
- 9 April 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (8) , 651
Open AccessOrdered Mesoporous Ceria and Cerium Gadolinium Oxide Prepared by Vacuum-Assisted Nanocasting
Four ceria-based mesoporous oxide materials were prepared using a new vacuum impregnation (VI) templating method developed by the authors, namely, vacuum-assisted nanocasting (VAN). Two hard templates (SBA-15 and KIT-6) were employed, and products with compositions CeO2 and Ce0.9Gd0.1O1.9 (CGO) were made with each. The desired fluorite phase and composition were confirmed by powder XRD and EDS. The product structures were characterised by XRD, TEM, gas physisorption and SAXS. All products contained ordered mesoporous material in high yields. The specific surface areas (SSAs) and pore volumes of the products were determined to be high and the pore size and pore spacings related well to the templates from which the materials were synthesised. The TEM studies confirmed that the samples had a 3D pore structure, with this being the negative of the original template. The target materials were not only produced in high yields, but also displayed a porous single-crystal morphology with non-linear lattice planes. The highest SSA values and pore volumes were reported for materials impregnated using the KIT-6 template and with the CGO composition. The results suggest that VAN is an excellent and reproducible method for producing ordered mesoporous cerias and has considerable potential for wider application. All the mesoporous products showed dramatically increased reducibility in TPR experiments compared with a high-SSA nanoparticulate ceria reference. This is very promising for their potential applications in oxidation catalysts and in fuel cell components.
- Open Access
- 28 December 2018
- Published by Springer Nature in SN Applied Sciences
- Vol. 1 (1) , 135
Properties and characterization of an aluminium–silicon nitride fibre powder metal composite
- 28 December 2018
- Published by Springer Nature in SN Applied Sciences
- Vol. 1 (1) , 135
Open AccessProperties and characterization of an aluminium–silicon nitride fibre powder metal composite
- 12 July 2018
- Published by Taylor & Francis in Composite Interfaces
- Vol. 26 (3) , 263-273
Interfacial adhesion: improving the mechanical properties of silicon nitride fibre - epoxy polymer composites
In this work silicon nitride (Si3N4) fibres, with diameters D50 = 300 nm, were successfully functionalised with a monolayer of γ-glycidoxypropyl trimethoxysilane (GPS) coupling agent. The surface modification was used as a method to enhance the dispersion and interfacial adhesion of the fibres in epoxy polymer composites. It is well known that strong interfacial adhesion between dispersed inorganic fibres and a polymer matrix improves the mechanical properties of the composite by providing an effective stress-transfer pathway between the matrix and the fibres. The functionalised Si3N4 fibres were dispersed into a commercial epoxy resin via tumble-mill mixing and ultra-sonication. Setting was initiated via addition of a poly-amine hardener and the composites were cured at room temperature for 24 hours. The fractured surfaces of the cured composite materials were analysed via SEM imaging and the mechanical properties of the composites were tested. The GPS-Si3N4 composites were shown to have improved bonding at the interface, which resulted in enhanced mechanical properties compared to the unfunctionalised Si3N4 composites, with improved tensile strengths and hardness values. This study shows the importance of achieving a strong interphase region between the surface of a fibre and the polymer matrix in fibre-reinforced polymer composites. GRAPHICAL ABSTRACT
- 12 July 2018
- Published by Taylor & Francis in Composite Interfaces
- Vol. 26 (3) , 263-273
Interfacial adhesion: improving the mechanical properties of silicon nitride fibre - epoxy polymer composites
In this work silicon nitride (Si3N4) fibres, with diameters D50 = 300 nm, were successfully functionalised with a monolayer of γ-glycidoxypropyl trimethoxysilane (GPS) coupling agent. The surface modification was used as a method to enhance the dispersion and interfacial adhesion of the fibres in epoxy polymer composites. It is well known that strong interfacial adhesion between dispersed inorganic fibres and a polymer matrix improves the mechanical properties of the composite by providing an effective stress-transfer pathway between the matrix and the fibres. The functionalised Si3N4 fibres were dispersed into a commercial epoxy resin via tumble-mill mixing and ultra-sonication. Setting was initiated via addition of a poly-amine hardener and the composites were cured at room temperature for 24 hours. The fractured surfaces of the cured composite materials were analysed via SEM imaging and the mechanical properties of the composites were tested. The GPS-Si3N4 composites were shown to have improved bonding at the interface, which resulted in enhanced mechanical properties compared to the unfunctionalised Si3N4 composites, with improved tensile strengths and hardness values. This study shows the importance of achieving a strong interphase region between the surface of a fibre and the polymer matrix in fibre-reinforced polymer composites. GRAPHICAL ABSTRACT
- 1 January 2008
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 28 (2) , 499-504
The electronic properties of complex oxides of bismuth with the mullite structure
- 1 January 2008
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 28 (2) , 499-504
The electronic properties of complex oxides of bismuth with the mullite structure