Robert Raine
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Robert Raine has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
M. Paul Smith
Oxford University Museum of Natural History, Parks Road, Oxford OX1 3PW, UK
4 shared publicationsIan Boomer
3 shared publicationsPhilip Copestake
3 shared publicationsAzrin Azmi
Univ Birmingham, GEES, Geosci Res Grp, Birmingham B15 2TT, W Midlands, England
2 shared publicationsCharles Sternbach
2 shared publications- Liam G. Herringshaw
Department of Earth Sciences, Memorial University of Newfoundland, St John's, Newfoundland, A1B 3X5, Canada
2 shared publications
Latest Publications
- 23 August 2026
- Published by Wiley in Sedimentology
From spiculites to glass ramps – palaeoenvironmental reassessment of Upper Jurassic shallow‐marine sediments dominated by siliceous sponges (Fulmar Formation, UK Central North Sea)
This study adds a new variant to the small, but steadily growing portfolio of work on ‘glass ramps’: coastal/shallow‐marine seaward‐dipping strata, comprising sediments rich in spiculite derived via disaggregation of siliceous sponge skeletons. It may be the first fully documented example of a glass ramp where the spiculite component was sourced from a donor community of (now extinct) rhaxellid sponges. Since glass ramps are based on non‐actualistic facies models, their recognition is both challenging and necessary for future attempts at their classification. Historically, the stratigraphic unit chosen for this study (Upper Jurassic Fulmar Formation, UK Central Graben) has been modelled as a terrigenous sandstone accumulation, despite acceptance that thick spiculite deposits occur locally. Key cored sections through these spiculites were examined using combined sedimentological, palaeontological and petrographical techniques. Analysis indicates that periodically ‘glass ramp’ conditions evolved when the proximal parts of the ramps became extensively colonised by rhaxellid sponge meadows (with associated faunas). These meadows anchored in sand‐sized sediment; initially this was wholly terrigenous in nature, before becoming enriched in sponge spicules via post‐mortem processes. Initiation of glass ramp conditions, with attendant spiculite production, was principally triggered by reduced rates of terrigenous sediment influx, itself a function of interacting higher‐order tectonic and eustatic controls. In this scenario, glass ramps appear to have transitioned into terrigenous ramps (and vice versa), both spatially and temporally. In the Fulmar Formation, there is no evidence to suggest that post‐mortem silica liberation (via early diagenetic processes) back into the water column was a prerequisite to new generations of sponges becoming established. This is in line with much higher postulated dissolved silica concentrations (DSi) in Late Jurassic seawater compared to today. The outcome of this work is a new facies model for spiculitic Fulmar Formation deposits which may have applications elsewhere in the geological record.
- 23 August 2026
- Published by Wiley in Sedimentology
From spiculites to glass ramps – palaeoenvironmental reassessment of Upper Jurassic shallow‐marine sediments dominated by siliceous sponges (Fulmar Formation, UK Central North Sea)
This study adds a new variant to the small, but steadily growing portfolio of work on ‘glass ramps’: coastal/shallow‐marine seaward‐dipping strata, comprising sediments rich in spiculite derived via disaggregation of siliceous sponge skeletons. It may be the first fully documented example of a glass ramp where the spiculite component was sourced from a donor community of (now extinct) rhaxellid sponges. Since glass ramps are based on non‐actualistic facies models, their recognition is both challenging and necessary for future attempts at their classification. Historically, the stratigraphic unit chosen for this study (Upper Jurassic Fulmar Formation, UK Central Graben) has been modelled as a terrigenous sandstone accumulation, despite acceptance that thick spiculite deposits occur locally. Key cored sections through these spiculites were examined using combined sedimentological, palaeontological and petrographical techniques. Analysis indicates that periodically ‘glass ramp’ conditions evolved when the proximal parts of the ramps became extensively colonised by rhaxellid sponge meadows (with associated faunas). These meadows anchored in sand‐sized sediment; initially this was wholly terrigenous in nature, before becoming enriched in sponge spicules via post‐mortem processes. Initiation of glass ramp conditions, with attendant spiculite production, was principally triggered by reduced rates of terrigenous sediment influx, itself a function of interacting higher‐order tectonic and eustatic controls. In this scenario, glass ramps appear to have transitioned into terrigenous ramps (and vice versa), both spatially and temporally. In the Fulmar Formation, there is no evidence to suggest that post‐mortem silica liberation (via early diagenetic processes) back into the water column was a prerequisite to new generations of sponges becoming established. This is in line with much higher postulated dissolved silica concentrations (DSi) in Late Jurassic seawater compared to today. The outcome of this work is a new facies model for spiculitic Fulmar Formation deposits which may have applications elsewhere in the geological record.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Multiproxy Geochemical Records of the Carnian Pluvial Episode in Laurasia
The Late Triassic Carnian Pluvial Episode (CPE, ~232 Ma) is characterized by significant changes in climate globally, with conditions shifting from arid to humid and wet, followed by a return to arid conditions. The climatic shift, recorded in multiple stratigraphic sections worldwide, is thought to have been driven by a perturbation of the global carbon cycle, associated with the emplacement of the Wrangellian Terrain Large Igneous Province (WT-LIP, ~231-225 Ma). The event is often linked to profound environmental and biotic change, including the rise and diversification of dinosaurs and the establishment of modern ecosystems. Here we present new high-resolution geochemical and sedimentological data from two Carnian successions from Laurasia: the Knocksoghey Formation of the Mercia Mudstone Group in the Carnduff-2 core, Northern Ireland, representing playa-lake and aeolian deposits, and the De Geerdalen Formation, Kapp Toscana Group in the DH-4 core, Longyearbyen, representing deltaic to shallow-marine settings. Together, these sites provide complementary mid- and high-latitude records of environmental change across the Carnian Pluvial Episode (CPE). We integrate carbon isotopes, elemental compositions, weathering indices, clay mineralogy, and Hg/TOC variations to assess the temporal link between the emplacement of the WT-LIP and the onset of the CPE. In the Knocksoghey Formation, the abrupt emplacement of coarser siliciclastic deposits, known as ‘Skerries’, disrupts otherwise monotonous fine-grained red paleosols, interpreted as evidence of enhanced weathering due to the CPE. These deposits are preceded by elevated Hg concentrations, a negative carbon isotope excursion of ~6‰, and concurrent increases in geochemical weathering proxies. Comparisons of Hg/TOC and δ13C data from our records with other localities show a marked increase in the Hg/TOC concurrently with the onset of a stepped negative carbon isotope excursion, similar to other well-characterized LIP-driven climate perturbations (e.g., Toarcian CIE), further supporting the WT-LIP volcanism as the driving mechanism of the CPE.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessMultiproxy Geochemical Records of the Carnian Pluvial Episode in Laurasia
The Late Triassic Carnian Pluvial Episode (CPE, ~232 Ma) is characterized by significant changes in climate globally, with conditions shifting from arid to humid and wet, followed by a return to arid conditions. The climatic shift, recorded in multiple stratigraphic sections worldwide, is thought to have been driven by a perturbation of the global carbon cycle, associated with the emplacement of the Wrangellian Terrain Large Igneous Province (WT-LIP, ~231-225 Ma). The event is often linked to profound environmental and biotic change, including the rise and diversification of dinosaurs and the establishment of modern ecosystems. Here we present new high-resolution geochemical and sedimentological data from two Carnian successions from Laurasia: the Knocksoghey Formation of the Mercia Mudstone Group in the Carnduff-2 core, Northern Ireland, representing playa-lake and aeolian deposits, and the De Geerdalen Formation, Kapp Toscana Group in the DH-4 core, Longyearbyen, representing deltaic to shallow-marine settings. Together, these sites provide complementary mid- and high-latitude records of environmental change across the Carnian Pluvial Episode (CPE). We integrate carbon isotopes, elemental compositions, weathering indices, clay mineralogy, and Hg/TOC variations to assess the temporal link between the emplacement of the WT-LIP and the onset of the CPE. In the Knocksoghey Formation, the abrupt emplacement of coarser siliciclastic deposits, known as ‘Skerries’, disrupts otherwise monotonous fine-grained red paleosols, interpreted as evidence of enhanced weathering due to the CPE. These deposits are preceded by elevated Hg concentrations, a negative carbon isotope excursion of ~6‰, and concurrent increases in geochemical weathering proxies. Comparisons of Hg/TOC and δ13C data from our records with other localities show a marked increase in the Hg/TOC concurrently with the onset of a stepped negative carbon isotope excursion, similar to other well-characterized LIP-driven climate perturbations (e.g., Toarcian CIE), further supporting the WT-LIP volcanism as the driving mechanism of the CPE.
- Open Access
- 24 July 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 243 (1)
A new subsurface temperature model for Ireland from joint geophysical–petrological inversion of seismic, surface heat flow and petrophysical data
SUMMARY: High-quality maps of subsurface temperature and the geothermal gradient are useful when assessing the geothermal potential of a region. However, determining geothermal potential is a challenge when direct measurements of in-situ temperature and thermal property information are sparse and indirect geophysical methods are sensitive to a range of parameters, not just temperature. Here, we produce subsurface temperature maps of Ireland using a joint geophysical–petrological inversion, where seismic and other geophysical and petrophysical data are inverted directly for temperature in 1-D columns and are collated into a pseudo 3-D temperature volume. Additionally, the inversion produces new models for Moho and LAB depth and for the average crustal radiogenic heat production. To assess the robustness of the resulting temperature model, an uncertainty analysis has been performed by inverting all of the 1-D columns for a range of reasonable input parameters applicable to the Irish crust (rather than the ‘best’ input parameters). The resulting uncertainty model suggests temperature estimates at 2 km depth in our model could vary by ± 2 to 5 °C with an average of 3.5 °C in most locations. The uncertainty model can be used to assess confidence in different regions of the temperature model. In addition, 3-D forward modelling was performed to assess the lateral heat flow variations when compared to the purely 1-D inversion. The upper-crustal geothermal gradient ranges from 20 to 40 °C km−1 indicating a higher geothermal gradient for Ireland than previously reported with subsurface temperatures at 2 km depth > 60 °C everywhere, sufficient for residential and industrial heating purposes. The temperature gradient is typically higher in areas with thinner lithosphere. However, in some locations, the observed geotherms are elevated further due to high radiogenic heat production in granitic rocks. In Northern Ireland, a thin lithosphere, coupled with a weakly conductive basalt layer overlying warm crust, results in elevated temperatures. These are the first temperature maps for Ireland that include uncertainty estimates, providing ranges for the subsurface temperature values, and demonstrate that the maps are comparable to direct independent borehole temperature measurements, which are observed to fall within the model uncertainty. Our new methodology provides workflows for determining the geothermal potential in areas with limited direct temperature measurements. The final temperature model with uncertainty provides useful constraints for geothermal exploration and utilization on the island of Ireland.
- 24 July 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 243 (1)
Open AccessA new subsurface temperature model for Ireland from joint geophysical–petrological inversion of seismic, surface heat flow and petrophysical data
SUMMARY: High-quality maps of subsurface temperature and the geothermal gradient are useful when assessing the geothermal potential of a region. However, determining geothermal potential is a challenge when direct measurements of in-situ temperature and thermal property information are sparse and indirect geophysical methods are sensitive to a range of parameters, not just temperature. Here, we produce subsurface temperature maps of Ireland using a joint geophysical–petrological inversion, where seismic and other geophysical and petrophysical data are inverted directly for temperature in 1-D columns and are collated into a pseudo 3-D temperature volume. Additionally, the inversion produces new models for Moho and LAB depth and for the average crustal radiogenic heat production. To assess the robustness of the resulting temperature model, an uncertainty analysis has been performed by inverting all of the 1-D columns for a range of reasonable input parameters applicable to the Irish crust (rather than the ‘best’ input parameters). The resulting uncertainty model suggests temperature estimates at 2 km depth in our model could vary by ± 2 to 5 °C with an average of 3.5 °C in most locations. The uncertainty model can be used to assess confidence in different regions of the temperature model. In addition, 3-D forward modelling was performed to assess the lateral heat flow variations when compared to the purely 1-D inversion. The upper-crustal geothermal gradient ranges from 20 to 40 °C km−1 indicating a higher geothermal gradient for Ireland than previously reported with subsurface temperatures at 2 km depth > 60 °C everywhere, sufficient for residential and industrial heating purposes. The temperature gradient is typically higher in areas with thinner lithosphere. However, in some locations, the observed geotherms are elevated further due to high radiogenic heat production in granitic rocks. In Northern Ireland, a thin lithosphere, coupled with a weakly conductive basalt layer overlying warm crust, results in elevated temperatures. These are the first temperature maps for Ireland that include uncertainty estimates, providing ranges for the subsurface temperature values, and demonstrate that the maps are comparable to direct independent borehole temperature measurements, which are observed to fall within the model uncertainty. Our new methodology provides workflows for determining the geothermal potential in areas with limited direct temperature measurements. The final temperature model with uncertainty provides useful constraints for geothermal exploration and utilization on the island of Ireland.
- Open Access
- 5 February 2025
- Published by Geological Society of London in Geoenergy
- Vol. 3 (1)
Reservoir heterogeneity in the Triassic Sherwood Sandstone Group: new insights from the Larne Basin, Northern Ireland
The Sherwood Sandstone Group (Lower Triassic) is being evaluated for geoenergy applications across NW Europe. This study investigates the interplay between depositional environment, heterogeneity, provenance and its impact on reservoir quality, utilizing the only continuously cored Sherwood Sandstone Group borehole (Kilroot GT-01) on the island of Ireland. Core analyses, wireline logs, quartz–feldspar–lithic (QFL) composition and grain-size results were integrated with local outcrops in the Larne region of Northern Ireland to develop a lithofacies scheme and establish textural controls on porosity–permeability. Results indicate that the best reservoir quality occurs in fine- to medium-grained, high net-to-gross (>70%) sandstones within stacked fluvial systems. The Lower Triassic can be divided into two broad coarsening-upward packages, possibly related to cycles of increased fluvial discharge. Comparing the results to previous provenance studies from Kilroot GT-01, the best primary reservoir quality appears to be linked to the extension of the Budleighensis river system, which flowed northwards from the Variscan highlands. The finer-grained sediment, with reduced reservoir quality, appears to be sourced more locally from Laurentian basement. Constraining the spatial extent of the Lower Triassic river systems sourced from Variscan terrains may, therefore, be of critical importance in understanding the distribution of the best quality reservoir sands for geoenergy applications.
- 5 February 2025
- Published by Geological Society of London in Geoenergy
- Vol. 3 (1)
Open AccessReservoir heterogeneity in the Triassic Sherwood Sandstone Group: new insights from the Larne Basin, Northern Ireland
The Sherwood Sandstone Group (Lower Triassic) is being evaluated for geoenergy applications across NW Europe. This study investigates the interplay between depositional environment, heterogeneity, provenance and its impact on reservoir quality, utilizing the only continuously cored Sherwood Sandstone Group borehole (Kilroot GT-01) on the island of Ireland. Core analyses, wireline logs, quartz–feldspar–lithic (QFL) composition and grain-size results were integrated with local outcrops in the Larne region of Northern Ireland to develop a lithofacies scheme and establish textural controls on porosity–permeability. Results indicate that the best reservoir quality occurs in fine- to medium-grained, high net-to-gross (>70%) sandstones within stacked fluvial systems. The Lower Triassic can be divided into two broad coarsening-upward packages, possibly related to cycles of increased fluvial discharge. Comparing the results to previous provenance studies from Kilroot GT-01, the best primary reservoir quality appears to be linked to the extension of the Budleighensis river system, which flowed northwards from the Variscan highlands. The finer-grained sediment, with reduced reservoir quality, appears to be sourced more locally from Laurentian basement. Constraining the spatial extent of the Lower Triassic river systems sourced from Variscan terrains may, therefore, be of critical importance in understanding the distribution of the best quality reservoir sands for geoenergy applications.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Hydrogeological Characterisation of Sherwood Sandstone using BNMR and Geophysical Logs
The Sherwood Sandstone is an important aquifer for geothermal energy in Northern Ireland. The Northern Ireland Government has identified geothermal energy, including aquifer thermal energy storage (ATES) systems, as a viable green energy source. This study investigates the hydrogeologic characteristics of the Sherwood Sandstone, with a focus on its porosity, using borehole nuclear magnetic resonance (BNMR) and geophysical models (Archie and Waxman-Smits).BNMR and geophysical logging were done inside three borehole installations drilled into the Sherwood Sandstone aquifer at a depth of about 100 m. The data (BNMR, resistivity log, EC log, temperature log, and natural gamma log) obtained from this exercise were analysed using WELLCAD.The results of the processed data showed that the porosity calculated from the BNMR and the two petrophysical logs are similar, demonstrating the relationship between nuclear magnetic resonance and petrophysical-derived porosity. The average porosity of the Sherwood Sandstone at this location ranges between 19.9% and 14.5%, the minimum ranges between 2.1% and 9.9% and the maximum ranges between 42.5% and 30.2%.This study confirmed the viability of Sherwood Sandstone for ATES systems, and further hydrogeologic characteristics such as hydraulic conductivity, transmissivity, and structure delineation are needed before its installation.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessHydrogeological Characterisation of Sherwood Sandstone using BNMR and Geophysical Logs
The Sherwood Sandstone is an important aquifer for geothermal energy in Northern Ireland. The Northern Ireland Government has identified geothermal energy, including aquifer thermal energy storage (ATES) systems, as a viable green energy source. This study investigates the hydrogeologic characteristics of the Sherwood Sandstone, with a focus on its porosity, using borehole nuclear magnetic resonance (BNMR) and geophysical models (Archie and Waxman-Smits).BNMR and geophysical logging were done inside three borehole installations drilled into the Sherwood Sandstone aquifer at a depth of about 100 m. The data (BNMR, resistivity log, EC log, temperature log, and natural gamma log) obtained from this exercise were analysed using WELLCAD.The results of the processed data showed that the porosity calculated from the BNMR and the two petrophysical logs are similar, demonstrating the relationship between nuclear magnetic resonance and petrophysical-derived porosity. The average porosity of the Sherwood Sandstone at this location ranges between 19.9% and 14.5%, the minimum ranges between 2.1% and 9.9% and the maximum ranges between 42.5% and 30.2%.This study confirmed the viability of Sherwood Sandstone for ATES systems, and further hydrogeologic characteristics such as hydraulic conductivity, transmissivity, and structure delineation are needed before its installation.
- Open Access
- 22 August 2024
- Published by Elsevier in Earth and Planetary Science Letters
- Vol. 644
Volcanic tempo driven by rapid fluctuations in mantle temperature during large igneous province emplacement
- 22 August 2024
- Published by Elsevier in Earth and Planetary Science Letters
- Vol. 644
Open AccessVolcanic tempo driven by rapid fluctuations in mantle temperature during large igneous province emplacement
- Open Access
- 14 October 2022
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 532 (1) , 191-266
A synopsis of the Ordovician System in its birthplace – Britain and Ireland
Rock successions in Britain and Ireland, and more especially those in Wales, were instrumental in the founding and naming of the Ordovician System, and the Anglo-Welsh series established both initially and subsequently were used widely as a standard for Ordovician chronostratigraphy. Although now largely superseded in the global scheme of series and stages, they retain their local and regional importance. The Ordovician System in Britain and Ireland documents the history of a segment of the Earth's crust that incorporated opposing peri-Gondwanan and peri-Laurentian/Laurentian margins of the Iapetus Ocean during its closure, and is accordingly complex. The complexity arises from the volcanic and tectonic processes that accompanied oceanic closure coupled with the effects of eustatic sea-level changes, including the far-field effects of the Late Ordovician glaciation. For the past three decades, Ordovician successions in Britain and Ireland have been discussed in terms of terranes. Here we review Ordovician successions in each terrane, incorporating the results of recent research and correlating those successions via biostratigraphical schemes and radiometric dates to the global Ordovician series and stages.
- 14 October 2022
- Published by Geological Society of London in Geological Society, London, Special Publications
- Vol. 532 (1) , 191-266
Open AccessA synopsis of the Ordovician System in its birthplace – Britain and Ireland
Rock successions in Britain and Ireland, and more especially those in Wales, were instrumental in the founding and naming of the Ordovician System, and the Anglo-Welsh series established both initially and subsequently were used widely as a standard for Ordovician chronostratigraphy. Although now largely superseded in the global scheme of series and stages, they retain their local and regional importance. The Ordovician System in Britain and Ireland documents the history of a segment of the Earth's crust that incorporated opposing peri-Gondwanan and peri-Laurentian/Laurentian margins of the Iapetus Ocean during its closure, and is accordingly complex. The complexity arises from the volcanic and tectonic processes that accompanied oceanic closure coupled with the effects of eustatic sea-level changes, including the far-field effects of the Late Ordovician glaciation. For the past three decades, Ordovician successions in Britain and Ireland have been discussed in terms of terranes. Here we review Ordovician successions in each terrane, incorporating the results of recent research and correlating those successions via biostratigraphical schemes and radiometric dates to the global Ordovician series and stages.
- 1 December 2021
- Published by Elsevier in Proceedings of the Geologists' Association
- Vol. 132 (6) , 667-687
Stratigraphy, palaeoenvironments and geochemistry across the Triassic–Jurassic boundary transition at Carnduff, County Antrim, Northern Ireland
- 1 December 2021
- Published by Elsevier in Proceedings of the Geologists' Association
- Vol. 132 (6) , 667-687
Stratigraphy, palaeoenvironments and geochemistry across the Triassic–Jurassic boundary transition at Carnduff, County Antrim, Northern Ireland
- 1 December 2021
- Published by Elsevier in Proceedings of the Geologists' Association
- Vol. 132 (6) , 657-666
Lower Jurassic (Hettangian–Pliensbachian) microfossil biostratigraphy of the Ballinlea-1 well, Rathlin Basin, Northern Ireland, United Kingdom
- 1 December 2021
- Published by Elsevier in Proceedings of the Geologists' Association
- Vol. 132 (6) , 657-666
Lower Jurassic (Hettangian–Pliensbachian) microfossil biostratigraphy of the Ballinlea-1 well, Rathlin Basin, Northern Ireland, United Kingdom
- 1 December 2021
- Published by Elsevier in Proceedings of the Geologists' Association
- Vol. 132 (6) , 627-640
Uppermost Triassic to Lower Jurassic sediments of the island of Ireland and its surrounding basins
- 1 December 2021
- Published by Elsevier in Proceedings of the Geologists' Association
- Vol. 132 (6) , 627-640
Uppermost Triassic to Lower Jurassic sediments of the island of Ireland and its surrounding basins