Angela Altomare
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Angela Altomare has a total of 229 co-authors. Here are the top co-authors by number of shared publications:
- Anna Moliterni
National Research Council of Italy CNR-IC, via Amendola122/O, 70126 Bari, Italy
68 shared publications - Rosanna Rizzi
Institute of Crystallography-CNR, Via G. Amendola 122/o, 70126 Bari, Italy
65 shared publications - Corrado Cuocci
Institute of Crystallography-CNR, Via G. Amendola 122/o, 70126 Bari, Italy
47 shared publications - Carmelo Giacovazzo
Istituto di Cristallografia, CNR, Via G. Amendola 122/O, I-70126 Bari, Italy
27 shared publications - Antonietta Guagliardi
Istituto di Cristallografia and To.Sca.Lab, Consiglio Nazionale delle Ricerche, via Valleggio 11, 22100 Como, Italy
17 shared publications C. Giacovazzo
Institute of Crystallography CNR via Amendola 122 70126 Bari Italy
14 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 13 (6) , 717-732
New frontiers in the structural analysis of nanomaterials: a deep-learning leap to bridge the gap in crystalline order
High-resolution crystal structure determination using X-ray, electron or neutron diffraction is often limited by poor crystallinity, small crystallite size and instrumental factors, which cause significant diffraction peak broadening and a consequent loss of information. This challenge is particularly severe for nanocrystalline materials, whose X-ray powder diffraction (XRPD) profiles exhibit extensive peak overlap, thereby hindering the reliable extraction of structural information through conventional crystallographic methods. We present here a novel deep-learning-based approach to increase the probability of determining the structure of nanocrystals. A deep-learning model is trained to transform simulated diffraction patterns, degraded by reduced crystalline order, into optimal profiles representative of ideal perfectly crystalline materials. Instead of attempting direct structure inference, this approach improves data by making them better suited for standard crystallographic analyses. The resulting pipeline is both robust and versatile, demonstrating consistent performance across varying crystallite sizes on simulated profiles. The procedure has also been successfully applied to experimental data. To our knowledge, this is the first application of deep learning to enhance experimental XRPD data, representing a breakthrough in the structural characterization of nanocrystalline materials, specifically by enabling progress in difficult cases where atomic-level structure determination is hindered by poor diffraction data.
- 8 October 2026
- Published by International Union of Crystallography (IUCr) in IUCrJ
- Vol. 13 (6) , 717-732
Open AccessNew frontiers in the structural analysis of nanomaterials: a deep-learning leap to bridge the gap in crystalline order
High-resolution crystal structure determination using X-ray, electron or neutron diffraction is often limited by poor crystallinity, small crystallite size and instrumental factors, which cause significant diffraction peak broadening and a consequent loss of information. This challenge is particularly severe for nanocrystalline materials, whose X-ray powder diffraction (XRPD) profiles exhibit extensive peak overlap, thereby hindering the reliable extraction of structural information through conventional crystallographic methods. We present here a novel deep-learning-based approach to increase the probability of determining the structure of nanocrystals. A deep-learning model is trained to transform simulated diffraction patterns, degraded by reduced crystalline order, into optimal profiles representative of ideal perfectly crystalline materials. Instead of attempting direct structure inference, this approach improves data by making them better suited for standard crystallographic analyses. The resulting pipeline is both robust and versatile, demonstrating consistent performance across varying crystallite sizes on simulated profiles. The procedure has also been successfully applied to experimental data. To our knowledge, this is the first application of deep learning to enhance experimental XRPD data, representing a breakthrough in the structural characterization of nanocrystalline materials, specifically by enabling progress in difficult cases where atomic-level structure determination is hindered by poor diffraction data.
- Open Access
- 18 October 2025
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 58 (6) , 1859-1869
The AI-based phase-seeding (AI-PhaSeed) method: early applications and statistical analysis
The crystallographic challenge of structure determination is nowadays effectively supported by advanced computational methods, such as direct methods and Patterson techniques, implemented in sophisticated software. With the rapid expansion of artificial intelligence (AI) across diverse scientific domains, exploring its potential contribution to structure solution and its ability to overcome the limitations of traditional approaches has become increasingly compelling. This work builds upon and extends the findings of two recent studies on AI-driven phasing. The first, by Larsen et al. [ Science (2024), 385 , 522–528], focused on designing and applying a neural network architecture to solve small structures (with unit-cell volumes up to 1000 Å 3 ), primarily within the most common centrosymmetric space group P 2 1 / c . The second, by Carrozzini et al. [ Acta Cryst. (2025), A 81 , 188–201], introduced a novel phase-seeding method applicable to both centrosymmetric and non-centrosymmetric crystal structures of varying complexity, from small molecules to proteins. Although designed with AI integration in mind, this latter method had not yet been tested within an AI framework. In this paper, we apply the method proposed by Carrozzini et al. to cases where seed phases are generated by the AI network developed by Larsen et al. We demonstrate that this combined approach, termed AI-PhaSeed, successfully extends the applicability of Larsen's neural network to structures with unit-cell volumes exceeding 1000 Å 3 , even under conditions of limited experimental resolution. The proposed procedure has been extensively tested on a set of structures taken from the Crystallography Open Database, proving it to be a powerful and reliable tool for structure solution. We also provide insights into the use of AI for crystallographic phasing and introduce statistical tools to evaluate the robustness of the solution process based on AI-calculated phases.
- 18 October 2025
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 58 (6) , 1859-1869
Open AccessThe AI-based phase-seeding (AI-PhaSeed) method: early applications and statistical analysis
The crystallographic challenge of structure determination is nowadays effectively supported by advanced computational methods, such as direct methods and Patterson techniques, implemented in sophisticated software. With the rapid expansion of artificial intelligence (AI) across diverse scientific domains, exploring its potential contribution to structure solution and its ability to overcome the limitations of traditional approaches has become increasingly compelling. This work builds upon and extends the findings of two recent studies on AI-driven phasing. The first, by Larsen et al. [ Science (2024), 385 , 522–528], focused on designing and applying a neural network architecture to solve small structures (with unit-cell volumes up to 1000 Å 3 ), primarily within the most common centrosymmetric space group P 2 1 / c . The second, by Carrozzini et al. [ Acta Cryst. (2025), A 81 , 188–201], introduced a novel phase-seeding method applicable to both centrosymmetric and non-centrosymmetric crystal structures of varying complexity, from small molecules to proteins. Although designed with AI integration in mind, this latter method had not yet been tested within an AI framework. In this paper, we apply the method proposed by Carrozzini et al. to cases where seed phases are generated by the AI network developed by Larsen et al. We demonstrate that this combined approach, termed AI-PhaSeed, successfully extends the applicability of Larsen's neural network to structures with unit-cell volumes exceeding 1000 Å 3 , even under conditions of limited experimental resolution. The proposed procedure has been extensively tested on a set of structures taken from the Crystallography Open Database, proving it to be a powerful and reliable tool for structure solution. We also provide insights into the use of AI for crystallographic phasing and introduce statistical tools to evaluate the robustness of the solution process based on AI-calculated phases.
- Open Access
- 17 April 2025
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section A Foundations and Advances
- Vol. 81 (3) , 188-201
The phase-seeding method for solving non-centrosymmetric crystal structures: a challenge for artificial intelligence
The overall crystallographic process involves acquiring experimental data and using crystallographic software to find the structure solution. Unfortunately, while diffracted intensities can be measured, the corresponding phases – needed to determine atomic positions – remain experimentally inaccessible (phase problem). Direct methods and the Patterson approach have been successful in solving crystal structures but face limitations with large structures or low-resolution data. Current artificial intelligence (AI) based approaches, such as those recently developed by Larsen et al. [Science (2024), 385, 522–528], have been applied with success to solve centrosymmetric structures, where the phase is binary (0 or π). The current work proposes a new phasing method designed for AI integration, applicable also to non-centrosymmetric structures, where the phase is a continuous variable. The approach involves discretizing the initial phase values for non-centrosymmetric structures into a few distinct values (e.g. values corresponding to the four quadrants). This reduces the complex phase problem from a continuous regression task to a multi-class classification problem, where only a few phase seed values need to be determined. This discretization allows the use of a smaller training dataset for deep learning models, reducing computational complexity. Our feasibility study results show that this method can effectively solve small, medium and large structures, with the minimum percentage of phase seeds (three or four points in the interval [0, 2π]), and 10% to 30% of seed symmetry-independent reflections. This phase-seeding method has the potential to extend AI-based approaches to solve crystal structures ab initio, regardless of complexity or symmetry, by combining AI classification algorithms with classical phasing procedures.
- 17 April 2025
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section A Foundations and Advances
- Vol. 81 (3) , 188-201
Open AccessThe phase-seeding method for solving non-centrosymmetric crystal structures: a challenge for artificial intelligence
The overall crystallographic process involves acquiring experimental data and using crystallographic software to find the structure solution. Unfortunately, while diffracted intensities can be measured, the corresponding phases – needed to determine atomic positions – remain experimentally inaccessible (phase problem). Direct methods and the Patterson approach have been successful in solving crystal structures but face limitations with large structures or low-resolution data. Current artificial intelligence (AI) based approaches, such as those recently developed by Larsen et al. [Science (2024), 385, 522–528], have been applied with success to solve centrosymmetric structures, where the phase is binary (0 or π). The current work proposes a new phasing method designed for AI integration, applicable also to non-centrosymmetric structures, where the phase is a continuous variable. The approach involves discretizing the initial phase values for non-centrosymmetric structures into a few distinct values (e.g. values corresponding to the four quadrants). This reduces the complex phase problem from a continuous regression task to a multi-class classification problem, where only a few phase seed values need to be determined. This discretization allows the use of a smaller training dataset for deep learning models, reducing computational complexity. Our feasibility study results show that this method can effectively solve small, medium and large structures, with the minimum percentage of phase seeds (three or four points in the interval [0, 2π]), and 10% to 30% of seed symmetry-independent reflections. This phase-seeding method has the potential to extend AI-based approaches to solve crystal structures ab initio, regardless of complexity or symmetry, by combining AI classification algorithms with classical phasing procedures.
- Open Access
- 16 April 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (27) , e202500081
Choline Chloride/Urea – Promoted Iodocyclization of 3‐Alkynylthiophene‐2‐carboxamides: A Green Synthesis of 4‐Iodo‐7H‐thieno[2,3‐c]pyran‐7‐imines and Their Coupling Reactions in Deep Eutectic Solvents
A green approach to a previously unknown class of iodine‐containing heterocycles, namely 4‐iodo‐7H‐thieno[2,3‐c]pyran‐7‐imines, by iodocyclization of readily available 3‐alkynylthiophene‐2‐carboxamides in a deep eutectic solvent (DES) as both solvent and promoter, has been developed. We have found that, while the reaction with I2 and K2CO3 as the base in a classical volatile organic solvent proceeded to a very limited extent, the iodocyclization was successful when performed under neutral conditions in choline chloride/urea (1/2 molar ratio). Moreover, the DES could be efficiently recycled several times without a significant decrease in the product yield. The promoting effect of the DES has been studied in detail using computational methods. The possibility to further decorate the newly synthesized iodinated heterocycles in a DES solvent (choline chloride/glycerol, 1/2 molar ratio, for Sonogashira reaction, and betaine/glycerol, 1/2 molar ratio, for Suzuki‐Miyaura coupling) has been successfully assessed, and the solvent‐catalyst system was recycled several times without appreciable loss of activity. A computational study on the effect of the betaine/glycerol system in the Suzuki–Miyaura cross‐coupling has also been carried out, while the structures of representative products have been confirmed by X‐ray diffraction analysis.
- 16 April 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (27) , e202500081
Open AccessCholine Chloride/Urea – Promoted Iodocyclization of 3‐Alkynylthiophene‐2‐carboxamides: A Green Synthesis of 4‐Iodo‐7H‐thieno[2,3‐c]pyran‐7‐imines and Their Coupling Reactions in Deep Eutectic Solvents
A green approach to a previously unknown class of iodine‐containing heterocycles, namely 4‐iodo‐7H‐thieno[2,3‐c]pyran‐7‐imines, by iodocyclization of readily available 3‐alkynylthiophene‐2‐carboxamides in a deep eutectic solvent (DES) as both solvent and promoter, has been developed. We have found that, while the reaction with I2 and K2CO3 as the base in a classical volatile organic solvent proceeded to a very limited extent, the iodocyclization was successful when performed under neutral conditions in choline chloride/urea (1/2 molar ratio). Moreover, the DES could be efficiently recycled several times without a significant decrease in the product yield. The promoting effect of the DES has been studied in detail using computational methods. The possibility to further decorate the newly synthesized iodinated heterocycles in a DES solvent (choline chloride/glycerol, 1/2 molar ratio, for Sonogashira reaction, and betaine/glycerol, 1/2 molar ratio, for Suzuki‐Miyaura coupling) has been successfully assessed, and the solvent‐catalyst system was recycled several times without appreciable loss of activity. A computational study on the effect of the betaine/glycerol system in the Suzuki–Miyaura cross‐coupling has also been carried out, while the structures of representative products have been confirmed by X‐ray diffraction analysis.
- Open Access
- 7 November 2024
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 27 (34)
Unveiling the Structural Complexity of Lithium Organozinc Alkoxo Clusters and their Applications to Enantioselective Michael Addition Reactions
We report three novel lithium zincate alkoxo clusters, which can be accessed through a convenient co‐complexation reaction of the corresponding dialkylzinc derivatives with lithium alkoxides of the formula [LiO(CH 2 ) 2 N(CH 3 ) 2 ], or via a deprotonation process mediated by the higher‐order zincate Li 2 ZnEt 4 and dimethylethanolamine. These complexes have been isolated as colourless crystalline solids and characterised by multinuclear magnetic resonance spectroscopy, elemental and single‐crystal X‐ray diffraction analysis. XRD analysis of the crystal structures, combined with 1 H DOSY NMR experiments, was crucial for understanding the chemistry behind these complexes. Furthermore, complexes obtained by mixing ZnEt 2 with a chiral nonracemic lithium alkoxide generated from (1 R ,2 S )‐ N ‐methylephedrine have been explored in promoting an enantioselective Michael addition reaction towards trans ‐β‐nitrostyrene, with the corresponding nitroalkane isolated in up to 37.3 % enantiomeric excess.
- 7 November 2024
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 27 (34)
Open AccessUnveiling the Structural Complexity of Lithium Organozinc Alkoxo Clusters and their Applications to Enantioselective Michael Addition Reactions
We report three novel lithium zincate alkoxo clusters, which can be accessed through a convenient co‐complexation reaction of the corresponding dialkylzinc derivatives with lithium alkoxides of the formula [LiO(CH 2 ) 2 N(CH 3 ) 2 ], or via a deprotonation process mediated by the higher‐order zincate Li 2 ZnEt 4 and dimethylethanolamine. These complexes have been isolated as colourless crystalline solids and characterised by multinuclear magnetic resonance spectroscopy, elemental and single‐crystal X‐ray diffraction analysis. XRD analysis of the crystal structures, combined with 1 H DOSY NMR experiments, was crucial for understanding the chemistry behind these complexes. Furthermore, complexes obtained by mixing ZnEt 2 with a chiral nonracemic lithium alkoxide generated from (1 R ,2 S )‐ N ‐methylephedrine have been explored in promoting an enantioselective Michael addition reaction towards trans ‐β‐nitrostyrene, with the corresponding nitroalkane isolated in up to 37.3 % enantiomeric excess.
- Open Access
New Findings on the Crystal Polymorphism of Imepitoin
Scientific and industrial reasons dictate the study of the solid state of imepitoin, a highly safe and tolerable anticonvulsant drug used in the therapy of epileptic dogs that was approved in the Europe Union in 2013. Our investigations allowed us to discover the existence of a new polymorph of imepitoin, which finds itself in a monotropic relationship with the crystalline form (polymorph I) already known and present on the market. This form (polymorph II), obtained by crystallization from xylene, remains metastable under ambient conditions for at least 1 year. Both solid forms were characterized by thermal (DSC and TGA), spectroscopic (FT-IR and Raman), microscopic (SEM and HSM), and diffractometric techniques. The thermodynamic relationship between the two polymorphs (monotropic) is such that it is not possible to study the melting of polymorph II, not even by adopting appropriate experimental strategies. Our measurements highlighted that the melting peak of imepitoin actually also includes an onset of melt decomposition. The ab initio structure solution, obtained from synchrotron X-ray powder diffraction data collected at room temperature, allowed us to determine the crystal structure of the new polymorph (II). It crystallizes in the monoclinic crystal structure, P21/c space group (#14), with a = 14.8687(6) Å, b = 7.2434(2) Å, c = 12.5592(4) Å, β = 107.5586(8)°, V = 1289.61(8) Å3, and Z = 4.
Open AccessNew Findings on the Crystal Polymorphism of Imepitoin
Scientific and industrial reasons dictate the study of the solid state of imepitoin, a highly safe and tolerable anticonvulsant drug used in the therapy of epileptic dogs that was approved in the Europe Union in 2013. Our investigations allowed us to discover the existence of a new polymorph of imepitoin, which finds itself in a monotropic relationship with the crystalline form (polymorph I) already known and present on the market. This form (polymorph II), obtained by crystallization from xylene, remains metastable under ambient conditions for at least 1 year. Both solid forms were characterized by thermal (DSC and TGA), spectroscopic (FT-IR and Raman), microscopic (SEM and HSM), and diffractometric techniques. The thermodynamic relationship between the two polymorphs (monotropic) is such that it is not possible to study the melting of polymorph II, not even by adopting appropriate experimental strategies. Our measurements highlighted that the melting peak of imepitoin actually also includes an onset of melt decomposition. The ab initio structure solution, obtained from synchrotron X-ray powder diffraction data collected at room temperature, allowed us to determine the crystal structure of the new polymorph (II). It crystallizes in the monoclinic crystal structure, P21/c space group (#14), with a = 14.8687(6) Å, b = 7.2434(2) Å, c = 12.5592(4) Å, β = 107.5586(8)°, V = 1289.61(8) Å3, and Z = 4.
- Open Access
- 13 July 2023
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 23 (8) , 6034-6045
Navigating the Complex Solid Form Landscape of the Quercetin Flavonoid Molecule
Quercetin, a naturally occurring bioflavonoid substance widely used in the nutraceutical and food industries, exists in various solid forms that can have different physicochemical properties, thus impacting this compound's performance in various applications. In this work, we will clarify the complex solid-form landscape of this molecule. Two elusive isostructural solvates of quercetin were obtained from ethanol and methanol. The obtained crystals were characterized experimentally, but the crystallographic structure could not be solved due to their high instability. Nevertheless, the desolvated structure resulting from a high-temperature treatment (or prolonged storage at ambient conditions) of both these two labile crystals was characterized and solved via powder X-ray diffraction and solid-state nuclear magnetic resonance (SSNMR). This anhydrous crystal structure was compared with another anhydrous quercetin form obtained in our previous work, indicating that, at least, two different anhydrous polymorphs of quercetin exist. Navigating the solid-form landscape of quercetin is essential to ensure accurate control of the functional properties of food, nutraceutical, or pharmaceutical products containing crystal forms of this substance.
- 13 July 2023
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 23 (8) , 6034-6045
Open AccessNavigating the Complex Solid Form Landscape of the Quercetin Flavonoid Molecule
Quercetin, a naturally occurring bioflavonoid substance widely used in the nutraceutical and food industries, exists in various solid forms that can have different physicochemical properties, thus impacting this compound's performance in various applications. In this work, we will clarify the complex solid-form landscape of this molecule. Two elusive isostructural solvates of quercetin were obtained from ethanol and methanol. The obtained crystals were characterized experimentally, but the crystallographic structure could not be solved due to their high instability. Nevertheless, the desolvated structure resulting from a high-temperature treatment (or prolonged storage at ambient conditions) of both these two labile crystals was characterized and solved via powder X-ray diffraction and solid-state nuclear magnetic resonance (SSNMR). This anhydrous crystal structure was compared with another anhydrous quercetin form obtained in our previous work, indicating that, at least, two different anhydrous polymorphs of quercetin exist. Navigating the solid-form landscape of quercetin is essential to ensure accurate control of the functional properties of food, nutraceutical, or pharmaceutical products containing crystal forms of this substance.
- Open Access
Electrochemical and Structural Characterization of Lanthanum-Doped Hydroxyapatite: A Promising Material for Sensing Applications
In the quest to find powerful modifiers of screen-printed electrodes for sensing applications, a set of rare earth-doped Ca10−xREx(PO4)6(OH)2 (RE = La, Nd, Sm, Eu, Dy, and Tm and x = 0.01, 0.02, 0.10, and 0.20) hydroxyapatite (HAp) samples were subjected to an in-depth electrochemical characterization using electrochemical impedance spectroscopy and cyclic and square wave voltammetry. Among all of these, the inorganic phosphates doped with lanthanum proved to be the most reliable, revealing robust analytical performances in terms of sensitivity, repeatability, reproducibility, and reusability, hence paving the way for their exploitation in sensing applications. Structural data on La-doped HAp samples were also provided by using different techniques, including optical microscopy, X-ray diffraction, Rietveld refinement from X-ray data, Fourier transform infrared, and Raman vibrational spectroscopies, to complement the electrochemical characterization.
Open AccessElectrochemical and Structural Characterization of Lanthanum-Doped Hydroxyapatite: A Promising Material for Sensing Applications
In the quest to find powerful modifiers of screen-printed electrodes for sensing applications, a set of rare earth-doped Ca10−xREx(PO4)6(OH)2 (RE = La, Nd, Sm, Eu, Dy, and Tm and x = 0.01, 0.02, 0.10, and 0.20) hydroxyapatite (HAp) samples were subjected to an in-depth electrochemical characterization using electrochemical impedance spectroscopy and cyclic and square wave voltammetry. Among all of these, the inorganic phosphates doped with lanthanum proved to be the most reliable, revealing robust analytical performances in terms of sensitivity, repeatability, reproducibility, and reusability, hence paving the way for their exploitation in sensing applications. Structural data on La-doped HAp samples were also provided by using different techniques, including optical microscopy, X-ray diffraction, Rietveld refinement from X-ray data, Fourier transform infrared, and Raman vibrational spectroscopies, to complement the electrochemical characterization.
- Open Access
Structural Characterization of Low-Sr-Doped Hydroxyapatite Obtained by Solid-State Synthesis
Strontium-substituted Ca10(PO4)6(OH)2 hydroxyapatite (HAp) powders, with Sr wt% concentrations of 2.5, 5.6 and 10%, were prepared by a solid-state synthesis method. The chemical composition of the samples was accurately evaluated by using inductively coupled plasma (ICP) spectroscopy. The morphology of the samples was analyzed via optical microscopy, while structural characterization was achieved through powder X-ray diffraction (PXRD) and infrared (FTIR) and Raman spectroscopy. The PXRD structural characterization showed the presence of the Sr dopant in the Ca1 structural site for HAp with a lower Sr concentration and in the Ca2 site for the sample with a higher Sr concentration. FTIR and Raman spectra showed slight band shifts and minor modifications of the (PO4) bands with increasing the Sr doping rate.
Open AccessStructural Characterization of Low-Sr-Doped Hydroxyapatite Obtained by Solid-State Synthesis
Strontium-substituted Ca10(PO4)6(OH)2 hydroxyapatite (HAp) powders, with Sr wt% concentrations of 2.5, 5.6 and 10%, were prepared by a solid-state synthesis method. The chemical composition of the samples was accurately evaluated by using inductively coupled plasma (ICP) spectroscopy. The morphology of the samples was analyzed via optical microscopy, while structural characterization was achieved through powder X-ray diffraction (PXRD) and infrared (FTIR) and Raman spectroscopy. The PXRD structural characterization showed the presence of the Sr dopant in the Ca1 structural site for HAp with a lower Sr concentration and in the Ca2 site for the sample with a higher Sr concentration. FTIR and Raman spectra showed slight band shifts and minor modifications of the (PO4) bands with increasing the Sr doping rate.