Javad Sargolzaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Javad Sargolzaei has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
A. Hedayati Moghaddam
Department of Chemical Engineering Central Tehran Branch, Islamic Azad University Tehran Iran
9 shared publications- Behdad Ahangari
Department of Chemical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad 9177948944, Iran
4 shared publications M. Haghighi Asl
Department of Chemical Engineering, Ferdowsi University of Mashhad, PO Box 9177948944, Mashhad, Iran
4 shared publicationsA. Nouri
3 shared publications- Fatemeh Moosavi
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad 9177948974, Iran
3 shared publications J. Shayegan
Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
3 shared publications
Latest Publications
- Open Access
- 31 December 2023
- Published by University of Technology, Iraq - DIGITAL COMMONS in Engineering and Technology Journal
- p. 1-19
Investigating The Effect of Various Parameters on The Yield of Graphene Obtained Through Graphite Exfoliation Using CO2 Supercritical Fluid
Due to its high penetration force and low viscosity, the Supercritical carbon dioxide (scCO2) can spread between the graphite layers, overcome van der Waals forces, and transform graphite into multilayer graphene. The results of the test plan with the Design Expert software and also the use of these results in the laboratory showed that the parameters of temperature, pressure, initial amount of graphite, addition of surfactant and solvent auxiliary, the duration of sample placement in the device, the duration of carbon dioxide gas release from the device, and the time and power of ultrasonic and centrifuge operations can accelerate the exfoliation process. The resulting graphene was characterized by TEM, RAMAN, XRD, and AFM techniques. Based on the obtained results, it was found that mono/bilayer graphene was obtained by applying optimum conditions. The results confirmed the formation of mono/bilayer graphene based on the G-Band of 1583 cm-1 in the Raman test, a wavelength of 26.44° in the XRD test, and a thickness of 1.5 nm in the AFM test. With a simple, low-cost approach, this method, without using toxic and expensive chemicals with high profitability, can replace other complex graphene production methods, such as chemical vapor leakage and plasma etching, and be chemically reduced.
- 31 December 2023
- Published by University of Technology, Iraq - DIGITAL COMMONS in Engineering and Technology Journal
- p. 1-19
Open AccessInvestigating The Effect of Various Parameters on The Yield of Graphene Obtained Through Graphite Exfoliation Using CO2 Supercritical Fluid
Due to its high penetration force and low viscosity, the Supercritical carbon dioxide (scCO2) can spread between the graphite layers, overcome van der Waals forces, and transform graphite into multilayer graphene. The results of the test plan with the Design Expert software and also the use of these results in the laboratory showed that the parameters of temperature, pressure, initial amount of graphite, addition of surfactant and solvent auxiliary, the duration of sample placement in the device, the duration of carbon dioxide gas release from the device, and the time and power of ultrasonic and centrifuge operations can accelerate the exfoliation process. The resulting graphene was characterized by TEM, RAMAN, XRD, and AFM techniques. Based on the obtained results, it was found that mono/bilayer graphene was obtained by applying optimum conditions. The results confirmed the formation of mono/bilayer graphene based on the G-Band of 1583 cm-1 in the Raman test, a wavelength of 26.44° in the XRD test, and a thickness of 1.5 nm in the AFM test. With a simple, low-cost approach, this method, without using toxic and expensive chemicals with high profitability, can replace other complex graphene production methods, such as chemical vapor leakage and plasma etching, and be chemically reduced.
- 1 May 2020
- Published by Elsevier in Environmental Technology & Innovation
- Vol. 18, 100724
The effect of key factors in aerobic bioreactor and optimization by different strategies
- 1 May 2020
- Published by Elsevier in Environmental Technology & Innovation
- Vol. 18, 100724
The effect of key factors in aerobic bioreactor and optimization by different strategies
- 3 July 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 095010
Carbon aerogel/carboxylated carbon nanotubes: porous structure and electrical conductivity properties
- 3 July 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 095010
Carbon aerogel/carboxylated carbon nanotubes: porous structure and electrical conductivity properties
- 19 December 2017
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 37 (5) , 1638-1646
Investigation and optimization of the SND–SBR system for organic matter and ammonium nitrogen removal using the central composite design
- 19 December 2017
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 37 (5) , 1638-1646
Investigation and optimization of the SND–SBR system for organic matter and ammonium nitrogen removal using the central composite design
- 5 April 2017
- Published by Bentham Science Publishers Ltd. in Recent Innovations in Chemical Engineering
- Vol. 9 (2) , 88-97
A Mini-Review of Photo Catalytic Process in Wastewater Treatment
Introduction: In recent years many investigations have been accomplished in the field of photocatalysis for decomposition of organic matters and other pollutants in order to achieve stringent discharge standards. Therefore, making an assessment on the wastewater treatment processes through photocatalytic reactors seems to be an interesting option. Objective: In this study, we discussed the various methods and patents used for the synthesis of photocatalyst, kinetics of reaction, and the effects of operative parameters. Method: Photocatalytic reactors, several type of photocatalysts, and synthesis method of nanoparticle photocatalysts have been explained. Result: Improving the photocatalytic efficiency by electrical current, advantage of mixing, doping of photocatalyst, photocatalytic process kinetics, and parameters affecting the photocatalytic process such as temperature, initial concentration of pollutants, catalyst concentration, pH, UV irradiation intensity, solution stirring intensity, as well as, addition of hydrogen peroxide have been reviewed. Conclusion: UV irradiation and visible light are necessary in photacatalytic process. In some cases, increase in stirring intensity caused great enhancement in photocatalytic process. Further, addition of H2O2 increases the rate of photocatalytic process. Kinetics of photodecomposition of organic pollutants usually is first order.
- 5 April 2017
- Published by Bentham Science Publishers Ltd. in Recent Innovations in Chemical Engineering
- Vol. 9 (2) , 88-97
A Mini-Review of Photo Catalytic Process in Wastewater Treatment
Introduction: In recent years many investigations have been accomplished in the field of photocatalysis for decomposition of organic matters and other pollutants in order to achieve stringent discharge standards. Therefore, making an assessment on the wastewater treatment processes through photocatalytic reactors seems to be an interesting option. Objective: In this study, we discussed the various methods and patents used for the synthesis of photocatalyst, kinetics of reaction, and the effects of operative parameters. Method: Photocatalytic reactors, several type of photocatalysts, and synthesis method of nanoparticle photocatalysts have been explained. Result: Improving the photocatalytic efficiency by electrical current, advantage of mixing, doping of photocatalyst, photocatalytic process kinetics, and parameters affecting the photocatalytic process such as temperature, initial concentration of pollutants, catalyst concentration, pH, UV irradiation intensity, solution stirring intensity, as well as, addition of hydrogen peroxide have been reviewed. Conclusion: UV irradiation and visible light are necessary in photacatalytic process. In some cases, increase in stirring intensity caused great enhancement in photocatalytic process. Further, addition of H2O2 increases the rate of photocatalytic process. Kinetics of photodecomposition of organic pollutants usually is first order.
- 27 March 2017
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 36 (5) , 1428-1438
Implication of statistical design approach methodology for optimization of COD removal, effluent quality, and biosludge settling properties in aerobic bioreactors
- 27 March 2017
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 36 (5) , 1428-1438
Implication of statistical design approach methodology for optimization of COD removal, effluent quality, and biosludge settling properties in aerobic bioreactors
- 1 September 2016
- Published by Elsevier in Journal of Molecular Graphics and Modelling
- Vol. 69, 61-71
Molecular dynamics simulation study: The decryption of bi and tri aromatics behavior with NaX zeolite
- 1 September 2016
- Published by Elsevier in Journal of Molecular Graphics and Modelling
- Vol. 69, 61-71
Molecular dynamics simulation study: The decryption of bi and tri aromatics behavior with NaX zeolite
- Open Access
- 2 February 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (51) , 24240-24256
Optimization of several hydrodynamic and non-hydrodynamic operating parameters in treatment of synthetic wastewater containing wheat starch in a sequencing batch reactor (SBR) using response surface methodology
Synthetic wastewater containing wheat starch was treated using sequencing batch reactor (SBR) system working with bio sludge extracted from cow dung. In the first stage, full factorial design was used to investigate the impact of four hydrodynamic variables on process responses and optimum condition was detected. In the second stage, the most important hydrodynamic factor together with four different factors comprised a new design based on the response surface methodology and central composition design. Removal efficiency of starch (COD removal), effluent, and sludge quality were assessed as process responses. Impeller diameter and reactor geometry did not show strong impact on responses. Both designs showed superior results in predicting SBR performance. The analyses revealed that interactions between variables are crucially important and should be accounted in wastewater management. Moreover, it was attained that independent factors have diverse effects on responses which intensifies the necessity of optimization on all dependent parameters. In the optimum condition of the second design, COD removal of 92%, TSS of 38 mg/L, and SVI of 57 ml/g were obtained.
- 2 February 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (51) , 24240-24256
Open AccessOptimization of several hydrodynamic and non-hydrodynamic operating parameters in treatment of synthetic wastewater containing wheat starch in a sequencing batch reactor (SBR) using response surface methodology
Synthetic wastewater containing wheat starch was treated using sequencing batch reactor (SBR) system working with bio sludge extracted from cow dung. In the first stage, full factorial design was used to investigate the impact of four hydrodynamic variables on process responses and optimum condition was detected. In the second stage, the most important hydrodynamic factor together with four different factors comprised a new design based on the response surface methodology and central composition design. Removal efficiency of starch (COD removal), effluent, and sludge quality were assessed as process responses. Impeller diameter and reactor geometry did not show strong impact on responses. Both designs showed superior results in predicting SBR performance. The analyses revealed that interactions between variables are crucially important and should be accounted in wastewater management. Moreover, it was attained that independent factors have diverse effects on responses which intensifies the necessity of optimization on all dependent parameters. In the optimum condition of the second design, COD removal of 92%, TSS of 38 mg/L, and SVI of 57 ml/g were obtained.