Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Raimarius Delgado has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Docker-Enabled Real-Time Framework for Robotic Applications in Heterogeneous ROS 2 Environments

    by Ji Min Lim, Keon Woo Kim, Byoung Wook Choi, Raimarius Delgado

    Real-time performance remains a core requirement for safety-critical robotic applications. ROS 2 has become a de facto middleware standard, while Docker is increasingly adopted for modular and portable deployment. However, embedded hardware updates often constrain Linux distributions and real-time kernel versions, while existing software stacks depend on older ROS 2 releases and legacy libraries. This mismatch forces costly porting and revalidation, motivating heterogeneous deployments that mix ROS 2 versions across host and Docker container runtimes. Yet the overheads introduced by Docker and cross-version ROS 2 communication are not well quantified in terms of real-time guarantees. This paper presents a Docker-enabled real-time framework for evaluating robotic applications in heterogeneous ROS 2 deployments. The framework integrates an RT-PREEMPT–patched Linux kernel, Dockerized ROS 2 distributions, and configurable cross-version communication pathways to enable controlled, repeatable experiments without full-stack migration. We empirically quantify Docker-induced effects on real-time execution using task periodicity, jitter, and response time, and assess ROS 2 communication using end-to-end latency under host-only, container-only, and hybrid configurations. To demonstrate practical viability, we apply the framework to an operational mobile-robot use case that integrates legacy control code with new modules, including a reinforcement-learning decision layer, within a mixed host–container ROS 2 stack. The resulting analyses provide reusable tooling and actionable guidelines for deploying deterministic ROS 2 systems under containerized heterogeneous constraints.

  • Open Access

    Feasibility Study for a Python-Based Embedded Real-Time Control System

    by Se Yeon Cho, Raimarius Delgado, Byoung Wook Choi

    Because of its simplicity and the support of numerous useful libraries, Python has become one of the most popular programming languages for application development, even in embedded systems. However, in existing control systems where specific tasks must meet specific temporal deadlines and support schedulability with proper priority assignments, the Python interpreter may not satisfy real-time requirements, owing to features such as the global interpreter lock and garbage collector. This paper addresses these constraints with an approach that executes periodic real-time tasks under the fixed-priority preemptible scheduler of RT-Preempt. First, we implemented a Python real-time module that allows users to create and execute periodic tasks with fixed priorities based on Python. Then, we conducted experiments on an open embedded system, in this case, a Raspberry Pi 4. We evaluated the real-time performance, focusing on test metrics for control systems, such as task periodicity, responsiveness, and interrupt response. The results were then compared to those of conventional real-time tasks developed using the C language to validate the feasibility of the proposed method. Finally, we performed experimental validation by tracking the position of EtherCAT servo motors to demonstrate the feasibility of a Python-based real-time control system in a practical application.


  • RT-AIDE: A RTOS-Agnostic and Interoperable Development Environment for Real-Time Systems

    by Raimarius Delgado, Yong Hwan Jo, Byoung Wook Choi

    This paper presents RT-AIDE, a real-time operating system (RTOS)-Agnostic development environment considering performance evaluation and interoperation with non-real-time (NRT) tasks. Most real-time systems adopt RTOSes owing to their multi-tasking environment and priority-based scheduling. However, selecting for the appropriate RTOS according to application requirements is a complicated process as each RTOS has its own API and semantics. With open-source distributions real-time performance evaluation is also an open problem. RT-AIDE addresses this issue through the portable components to ensure execution across various RTOSes without modifying the source code, which has been proven to reduce development costs and effort as well. We also propose a new metric called real-time performance index to evaluate the behavior of the running application. To validate feasibility, theoretical analysis and practical experiment has been conducted on an actual control system based on Xenomai and RT-Preempt.


  • Open Access

    New Insights Into the Real-Time Performance of a Multicore Processor

    by Raimarius Delgado, Byoung Wook Choi

    Multicore processors are gaining popularity in various domains because of their potential for maximizing system throughput of average-case tasks. In real-time systems, where processes and tasks are governed by stringent temporal constraints, the worst-case timings should be considered, and migration to multicore processors leads to additional difficulties. Resource sharing between the cores introduces timing overheads, which affect the worst-case timings and schedulability of the entire system. In this paper, we provide new insights into the performance of the real-time extensions of Linux, namely, Xenomai and RT-Preempt, for a homogeneous multicore processor. First, complete details on leveraging both real-time extensions are presented. We identify various multicore deployments and discuss their trade-offs, as established through the experimental evaluation of the scheduling latency. Then, we propose a statistical method based on a variation of chi-square test to determine the best multicore deployment. The unexpected effects of interfering loads, such as CPU, memory, and network operations, on the real-time performance, are considered. Feasibility of the best multicore deployment is verified through the analysis of its periodicity and deterministic response times in a pre-emptive multitasking environment. This research is the first of its kind and will serve as a useful guideline for developing real-time applications on multicore processors.


  • Open Access

    Real-Time Characteristics of ROS 2.0 in Multiagent Robot Systems: An Empirical Study

    by Jaeho Park, Raimarius Delgado, Byoung Wook Choi

    Due to its ease of use and flexibility, the robot operating system (ROS) is increasingly becoming the most popular middleware for robot applications, even in multiagent systems. Since ROS 1.0 does not satisfy real-time requirements, ROS 2.0 was developed, and it improved the communication stack with the real-time data distribution service (DDS) protocol. However, the actual performance level to be expected is still unknown and can largely depend on the operating system and the kernel being used, the DDS distribution, and the overall software load of the system. In this paper, we present an empirical study that evaluates the real-time performance of ROS 2.0 in both the system and communication software layers. In the system layer, the deterministic behavior of the ROS 2.0 nodes is thoroughly observed with regard to whether the tasks are schedulable and can function within the specified temporal deadline. In the communication layer, special attention is devoted to the rate of data loss and the overall latency of messages between nodes. Experiments are performed in various working conditions; for example, the system load is increased to define the real-time performance of the tasks. For reference, the results are compared with the those from the traditional ROS variation. Moreover, we implement a multiagent service robot system to verify the suitability of ROS 2.0 for real-world applications. Our results show that the application of ROS 2.0 is more suitable than that of ROS 1.0 in terms of real-time performance.


  • Open Access

    Safe and Policy Oriented Secure Android-Based Industrial Embedded Control System

    by Raimarius Delgado, Jaeho Park, Cheonho Lee, Byoung Wook Choi

    Android is gaining popularity as the operating system of embedded systems and recent demands of its application on industrial control are steadily increasing. However, its feasibility is still in question due to two major drawbacks: safety and security. In particular, ensuring the safe operation of industrial control systems requires the system to be governed by stringent temporal constraints and should satisfy real-time requirements. In this sense, we explore the real-time characteristics of Xenomai to guarantee strict temporal deadlines, and provide a viable method integrating Android processes to real-time tasks. Security is another issue that affects safety due to the increased connectivity in industrial systems provoking a higher risk of cyber and hardware attacks. Herein, we adopted a hardware copy protection chip and enforced administrative security policies in the booting process and the Android application layer. These policies ensure that the developed system is protected from physical tampering and unwanted Android applications. The articulacy of the administrative policies is demonstrated through experiments. The developed embedded system is connected to an industrial EtherCAT motion device network exhibiting operability on an actual industrial application. Real-time performance was evaluated in terms of schedulability and responsiveness, which are critical in determining the safety and reliability of the control system.


  • Open Access

    Network-Oriented Real-Time Embedded System Considering Synchronous Joint Space Motion for an Omnidirectional Mobile Robot

    by Raimarius Delgado, Byoung Wook Choi

    This paper proposes a real-time embedded system for joint space control of omnidirectional mobile robots. Actuators driving an omnidirectional mobile robot are connected in a line topology which requires synchronization to move simultaneously in translation and rotation. We employ EtherCAT, a real-time Ethernet network, to control servo controllers for the mobile robot. The first part of this study focuses on the design of a low-cost embedded system utilizing an open-source EtherCAT master. Although satisfying real-time constraints is critical, a desired trajectory on the center of the mobile robot should be decomposed into the joint space to drive the servo controllers. For the center of the robot, a convolution-based path planner and a corresponding joint space control algorithm are presented considering its physical limits. To avoid obstacles that introduce geometric constraints on the curved path, a trajectory generation algorithm considering high curvature turning points is adapted for an omnidirectional mobile robot. Tracking a high curvature path increases mathematical complexity, which requires precise synchronization between the actuators of the mobile robot. An improvement of the distributed clock—the synchronization mechanism of EtherCAT for slaves—is presented and applied to the joint controllers of the mobile robot. The local time of the EtherCAT master is dynamically adjusted according to the drift of the reference slave, which minimizes the synchronization error between each joint. Experiments are conducted on our own developed four-wheeled omnidirectional mobile robot. The experiment results confirm that the proposed system is very effective in real-time control applications for precise motion control of the robot even for tracking high curvature paths.