Jongbum Kim
Jongbum Kim has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Alexander V. Kildishev
Purdue University West Lafayette
2 shared publications - Alexandra Boltasseva
Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, USA
2 shared publications - Jeremy N. Munday
Department of Electrical and Computer Engineering University of California Davis One Shields Avenue 95616-5270 Davis CA USA
2 shared publications Amr M. Shaltout
School of Electrical and Computer Engineering and Birck Nanotechnology Center, Purdue University , West Lafayette, Indiana 47907, United States
1 shared publication- Amr M. Shaltout
Purdue University, United States
1 shared publication - Benjamin Spreng
University of California, Davis
1 shared publication
Latest Publications
- Open Access
- 16 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (23) , 9254-9261
Casimir Force Control Enabled by 3D Nanostructures
The Casimir force dominates interactions between solid objects at sub-micrometer distances and typically limits the smallest distance between micromechanical devices before failure. Here, we experimentally circumvent this limitation by controlling the Casimir force with engineered 3D nanostructures. Using our recently developed method to align and measure the force between two microscale objects on the nanoscale, we characterized the force gradient between spheres and circular pillars, hollow cylinders, and periodic pillar arrays. We demonstrate that the force behavior can be dramatically modified in these geometries, resulting in a suppression of the Casimir force by 10× for a single pillar. We found agreement between theory and experiment, even when the size of the objects was comparable to the surface-to-surface separation (i.e., within a factor of ∼3). We anticipate that our results will impact the design of future micro- and nanoscale actuators, optomechanical devices with increased sensitivities and reduced stiction, and advanced bio-inspired adhesives.
- 16 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (23) , 9254-9261
Open AccessCasimir Force Control Enabled by 3D Nanostructures
The Casimir force dominates interactions between solid objects at sub-micrometer distances and typically limits the smallest distance between micromechanical devices before failure. Here, we experimentally circumvent this limitation by controlling the Casimir force with engineered 3D nanostructures. Using our recently developed method to align and measure the force between two microscale objects on the nanoscale, we characterized the force gradient between spheres and circular pillars, hollow cylinders, and periodic pillar arrays. We demonstrate that the force behavior can be dramatically modified in these geometries, resulting in a suppression of the Casimir force by 10× for a single pillar. We found agreement between theory and experiment, even when the size of the objects was comparable to the surface-to-surface separation (i.e., within a factor of ∼3). We anticipate that our results will impact the design of future micro- and nanoscale actuators, optomechanical devices with increased sensitivities and reduced stiction, and advanced bio-inspired adhesives.
- 15 July 2019
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 6 (9) , 2238-2244
Optoelectronic Devices on Index-near-Zero Substrates
- 15 July 2019
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 6 (9) , 2238-2244
Optoelectronic Devices on Index-near-Zero Substrates
- 23 January 2018
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (2) , 740-746
Dynamic Control of Nanocavities with Tunable Metal Oxides
Fabry-Pérot metal-insulator-metal (MIM) nano-cavities are widely used in nanophotonic applications due to their extraordinary electromagnetic properties and deeply subwavelength dimensions. However, the spectral response of nano-cavities is usually controlled by the spatial separation between the two reflecting mirrors and the spacer’s refractive index. Here, we demonstrate static and dynamic control of Fabry-Pérot nano-cavities by inserting a plasmonic metasurfaces, as a passive element, and a gallium doped-zinc oxide (Ga:ZnO) layer as a dynamically tunable component within the nano-cavities’ spacer. Specifically, by changing the design of the silver (Ag) metasurface one can ‘statically’ tailor the nano-cavity response, tuning the resonance up to 200 nm. To achieve the dynamic tuning, we utilize the large nonlinear response of the Ga:ZnO layer near the epsilon near zero wavelength to enable effective sub-picosecond (< 400fs) optical modulation (80%) at reasonably low pump fluence levels (9 mJ∕cm2). We demonstrate a 15-nm red-shift of a near-infrared Fabry-Pérot resonance (λ≅1.16 μm) by using a degenerate pump probe technique. We also study the carrier dynamics of Ga:ZnO under intraband photoexcitation via the electronic band structure calculated from first-principles density-functional method. This work provides a versatile approach to design metal nano-cavities by utilizing both the phase variation with plasmonic metasurfaces and the strong nonlinear response of metal oxides. Tailorable and dynamically controlled nano-cavities could pave the way to the development of the next generation of ultra-fast nanophotonic devices.
- 23 January 2018
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (2) , 740-746
Dynamic Control of Nanocavities with Tunable Metal Oxides
Fabry-Pérot metal-insulator-metal (MIM) nano-cavities are widely used in nanophotonic applications due to their extraordinary electromagnetic properties and deeply subwavelength dimensions. However, the spectral response of nano-cavities is usually controlled by the spatial separation between the two reflecting mirrors and the spacer’s refractive index. Here, we demonstrate static and dynamic control of Fabry-Pérot nano-cavities by inserting a plasmonic metasurfaces, as a passive element, and a gallium doped-zinc oxide (Ga:ZnO) layer as a dynamically tunable component within the nano-cavities’ spacer. Specifically, by changing the design of the silver (Ag) metasurface one can ‘statically’ tailor the nano-cavity response, tuning the resonance up to 200 nm. To achieve the dynamic tuning, we utilize the large nonlinear response of the Ga:ZnO layer near the epsilon near zero wavelength to enable effective sub-picosecond (< 400fs) optical modulation (80%) at reasonably low pump fluence levels (9 mJ∕cm2). We demonstrate a 15-nm red-shift of a near-infrared Fabry-Pérot resonance (λ≅1.16 μm) by using a degenerate pump probe technique. We also study the carrier dynamics of Ga:ZnO under intraband photoexcitation via the electronic band structure calculated from first-principles density-functional method. This work provides a versatile approach to design metal nano-cavities by utilizing both the phase variation with plasmonic metasurfaces and the strong nonlinear response of metal oxides. Tailorable and dynamically controlled nano-cavities could pave the way to the development of the next generation of ultra-fast nanophotonic devices.
- 1 January 2016
- Published by Optica Publishing Group
- p. FTh1D.5
Implementation of Metasurface Based Nano-Cavities
Subwavelength cavities are implemented by replacing conventional mirrors with reflecting metasurfaces that introduce arbitrary phase-shifts compensating for the reduced accumulated phase through the cavity. 140-nm cavities showed resonance at wavelengths from 600 to 900 nm
- 1 January 2016
- Published by Optica Publishing Group
- p. FTh1D.5
Implementation of Metasurface Based Nano-Cavities
Subwavelength cavities are implemented by replacing conventional mirrors with reflecting metasurfaces that introduce arbitrary phase-shifts compensating for the reduced accumulated phase through the cavity. 140-nm cavities showed resonance at wavelengths from 600 to 900 nm