Luiz Alberto Kanis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luiz Alberto Kanis has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Karine Modolon Zepon
Universidade do Sul de Santa Catarina
7 shared publications - Diego Moterle
Universidade do Sul de Santa Catarina, Grupo de Pesquisa em Tecnologia Farmacêutica, Tubarão
3 shared publications - Irene Clemes Külkamp-Guerreiro
Programa de Pós-Graduação em Ciências Farmacêuticas, Universidade Federal do Rio Grande do Sul, Porto Alegre 90610-000, Brazil
3 shared publications Josiane Somariva Prophiro
3 shared publicationsOnilda Santos da Silva
Universidade Federal do Rio Grande do Sul - UFRGS. Instituto de Ciências Básicas da Saúde. Departamento de Microbiologia, Parasitologia e Imunologia. Rua Sarmento Leite, 500, 90050-170, Porto Alegre, RS, Brazil
3 shared publications- Rachel Faverzani Magnago
Laboratório de Metabolômica e Bioquímica Aplicada, Programa de Pós‐graduação Em Biotecnologia e Biociência Universidade Federal de Santa Catarina Florianópolis Brazil
3 shared publications
Latest Publications
- 28 April 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (31)
Hot‐Melt Extrusion: Manufacturing of Ethylene‐Vinyl Acetate Implants With Antiviral Controlled Release
Herpes simplex virus types 1 and 2 (HSV‐1 and HSV‐2) are notable for their prevalence among the human population, being transmitted through direct contact or sexually, often in the absence of symptoms. HSV infections are chronic, characterized by a latent phase marked by episodic reactivations. Current treatments primarily rely on oral antiviral medications, particularly acyclovir (ACV), which, despite its effectiveness in inhibiting viral DNA replication, suffers from low bioavailability and requires high dosing, limiting patient adherence. Ethylene‐vinyl acetate (EVA) is widely used as a non‐degradable polymer in drug delivery systems. In this work, some EVA implantable rods with different ACV loads (0, 10, and 20 wt.%) were manufactured by hot‐melt extrusion. DSC analysis was useful to verify that the drug was successfully incorporated into the EVA matrix, which was also confirmed by SEM and FTIR. Mechanical tests were carried out on DMA and showed that the flexural modulus increased slightly with drug content, whereas the fatigue behavior was not significantly affected. Furthermore, the in vitro tests suggested a burst release on the first day followed by a lower release rate sustained up to 45 days. Therefore, these rods presented promising results and can be useful for the long‐term treatment of Herpes.
- 28 April 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (31)
Hot‐Melt Extrusion: Manufacturing of Ethylene‐Vinyl Acetate Implants With Antiviral Controlled Release
Herpes simplex virus types 1 and 2 (HSV‐1 and HSV‐2) are notable for their prevalence among the human population, being transmitted through direct contact or sexually, often in the absence of symptoms. HSV infections are chronic, characterized by a latent phase marked by episodic reactivations. Current treatments primarily rely on oral antiviral medications, particularly acyclovir (ACV), which, despite its effectiveness in inhibiting viral DNA replication, suffers from low bioavailability and requires high dosing, limiting patient adherence. Ethylene‐vinyl acetate (EVA) is widely used as a non‐degradable polymer in drug delivery systems. In this work, some EVA implantable rods with different ACV loads (0, 10, and 20 wt.%) were manufactured by hot‐melt extrusion. DSC analysis was useful to verify that the drug was successfully incorporated into the EVA matrix, which was also confirmed by SEM and FTIR. Mechanical tests were carried out on DMA and showed that the flexural modulus increased slightly with drug content, whereas the fatigue behavior was not significantly affected. Furthermore, the in vitro tests suggested a burst release on the first day followed by a lower release rate sustained up to 45 days. Therefore, these rods presented promising results and can be useful for the long‐term treatment of Herpes.
- 1 January 2023
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
Enhanced Larvicidal Activity of New 1,2,4-Oxadiazoles against Aedes aegypti Mosquitos: QSAR and Docking Studies
The worldwide emergence of viral diseases such as Zika, Dengue, Chikungunya, West Nile and Yellow Fever urge the search for solutions to eliminate their common vector, the Aedes aegypti mosquito. This paper describes the quantitative structure-activity relationship (QSAR) and docking studies of a series of nine 3-(3-aryl-1,2,4-oxadiazol-5-yl)propionic acids (AOPA), 1-9, previously published by our group. Additionally, three new 1,2,4-oxadiazoles, 10-12, have also been synthesized, characterized and studied. The QSAR and docking studies of all compounds, 1-12, clearly indicate that larger hydrophobic substituents such as biphenyl groups attached on position 3 in 1,2,4-oxadiazoles improve the larvicidal activity. It is worthwhile to mention that nanocapsulation of compounds 10-12 were necessary to help their dissolution in water and these three new 1,2,4-oxadiazoles also exhibited approximately equal or higher larvicidal activities compared to the former prototypes at stage L4.
- 1 January 2023
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
Enhanced Larvicidal Activity of New 1,2,4-Oxadiazoles against Aedes aegypti Mosquitos: QSAR and Docking Studies
The worldwide emergence of viral diseases such as Zika, Dengue, Chikungunya, West Nile and Yellow Fever urge the search for solutions to eliminate their common vector, the Aedes aegypti mosquito. This paper describes the quantitative structure-activity relationship (QSAR) and docking studies of a series of nine 3-(3-aryl-1,2,4-oxadiazol-5-yl)propionic acids (AOPA), 1-9, previously published by our group. Additionally, three new 1,2,4-oxadiazoles, 10-12, have also been synthesized, characterized and studied. The QSAR and docking studies of all compounds, 1-12, clearly indicate that larger hydrophobic substituents such as biphenyl groups attached on position 3 in 1,2,4-oxadiazoles improve the larvicidal activity. It is worthwhile to mention that nanocapsulation of compounds 10-12 were necessary to help their dissolution in water and these three new 1,2,4-oxadiazoles also exhibited approximately equal or higher larvicidal activities compared to the former prototypes at stage L4.
- 9 March 2022
- Published by Elsevier in Acta Tropica
- Vol. 230, 106395
Polymer-based nanostructures loaded with piperine as a platform to improve the larvicidal activity against Aedes aegypti
- 9 March 2022
- Published by Elsevier in Acta Tropica
- Vol. 230, 106395
Polymer-based nanostructures loaded with piperine as a platform to improve the larvicidal activity against Aedes aegypti
- 3 October 2021
- Published by Taylor & Francis in Drug Development and Industrial Pharmacy
- Vol. 47 (10) , 1556-1567
Polycaprolactone and polycaprolactone triol blends to obtain a stable liquid nanotechnological formulation: synthesis, characterization and in vitro – in vivo taste masking evaluation
The use of polymeric blends is a potential strategy to obtain novel nanotechnological formulations aiming at drug delivery systems. Saquinavir, an antiretroviral drug, was chosen as a model drug for the development of new stable liquid formulations with unpleasant taste masking properties. Three formulations containing different polymeric ratios (1:3, 1:1 and 3:1) were prepared and properly characterized by particle size distribution, zeta potential, pH, drug content and encapsulation efficiency measurements. The stability was verified by monitoring the zeta potential, particle size distribution, polydispersity index and drug content by 90 days. The light backscattering analysis was used to early identify possible phenomena of instability in the formulations. The in vitro drug release and saquinavir cytotoxicity were evaluated. The in vitro and in vivo taste masking properties were studied using an electronic tongue and a human sensory panel. All formulations presented nanometric size around 200 nm and encapsulation efficiency above 99%. The parameters evaluated for stability remained constant throughout 90 days. The in vitro tests showed a controlled drug release and absence of toxic effects on human T lymphocytes. The electronic tongue experiment showed taste difference for all formulations in comparison to drug solution, with a more pronounced difference for the formulation with higher polycaprolactone content (3:1). This formulation was chosen for in vivo sensory panel evaluation which results corroborated the electronic tongue experiments. In conclusion, the polymer blend nanoformulation developed herein showed promising application to incorporate drugs aiming at pharmaceutical taste-masking properties.
- 3 October 2021
- Published by Taylor & Francis in Drug Development and Industrial Pharmacy
- Vol. 47 (10) , 1556-1567
Polycaprolactone and polycaprolactone triol blends to obtain a stable liquid nanotechnological formulation: synthesis, characterization and in vitro – in vivo taste masking evaluation
The use of polymeric blends is a potential strategy to obtain novel nanotechnological formulations aiming at drug delivery systems. Saquinavir, an antiretroviral drug, was chosen as a model drug for the development of new stable liquid formulations with unpleasant taste masking properties. Three formulations containing different polymeric ratios (1:3, 1:1 and 3:1) were prepared and properly characterized by particle size distribution, zeta potential, pH, drug content and encapsulation efficiency measurements. The stability was verified by monitoring the zeta potential, particle size distribution, polydispersity index and drug content by 90 days. The light backscattering analysis was used to early identify possible phenomena of instability in the formulations. The in vitro drug release and saquinavir cytotoxicity were evaluated. The in vitro and in vivo taste masking properties were studied using an electronic tongue and a human sensory panel. All formulations presented nanometric size around 200 nm and encapsulation efficiency above 99%. The parameters evaluated for stability remained constant throughout 90 days. The in vitro tests showed a controlled drug release and absence of toxic effects on human T lymphocytes. The electronic tongue experiment showed taste difference for all formulations in comparison to drug solution, with a more pronounced difference for the formulation with higher polycaprolactone content (3:1). This formulation was chosen for in vivo sensory panel evaluation which results corroborated the electronic tongue experiments. In conclusion, the polymer blend nanoformulation developed herein showed promising application to incorporate drugs aiming at pharmaceutical taste-masking properties.
- Open Access
- 1 January 2021
- Published by Universidad Pedagogica y Tecnologica de Colombia in Revista Colombiana de Ciencias Hortícolas
- Vol. 15 (1) , e10591
Effects of nitrogen fertilization on growth and yield of diterpene glycosides in stevia (Stevia rebaudiana Bertoni)
The effects of different nitrogen doses on dry weight yield, stevioside and rebaudioside A contents, and yields were evaluated in stevia (Stevia rebaudiana Bertoni). This study was carried out at the Instituto Federal Catarinense, Rio do Sul (SC), Brazil, under decreasing photoperiods. A randomized complete block design with four blocks and five treatments (0, 65, 135, 200 and 270 kg ha-1 N) was used. Variables related to dry weight yield (total dry weight, leaf dry weight, stem dry weight, number of secondary branches and tertiary branches, and main stem length), growth rates (total leaf area, leaf area index, specific leaf area, leaf area ratio, leaf weight ratio), and stevioside and rebaudioside A contents and yields were evaluated. The doses of nitrogen fertilization did not affect the variables related to dry weight yield, stevioside and rebaudioside A contents and yields, or rebaudioside A:stevioside ratio in stevia genotype 8 (G8), grown under decreasing photoperiods.
- 1 January 2021
- Published by Universidad Pedagogica y Tecnologica de Colombia in Revista Colombiana de Ciencias Hortícolas
- Vol. 15 (1) , e10591
Open AccessEffects of nitrogen fertilization on growth and yield of diterpene glycosides in stevia (Stevia rebaudiana Bertoni)
The effects of different nitrogen doses on dry weight yield, stevioside and rebaudioside A contents, and yields were evaluated in stevia (Stevia rebaudiana Bertoni). This study was carried out at the Instituto Federal Catarinense, Rio do Sul (SC), Brazil, under decreasing photoperiods. A randomized complete block design with four blocks and five treatments (0, 65, 135, 200 and 270 kg ha-1 N) was used. Variables related to dry weight yield (total dry weight, leaf dry weight, stem dry weight, number of secondary branches and tertiary branches, and main stem length), growth rates (total leaf area, leaf area index, specific leaf area, leaf area ratio, leaf weight ratio), and stevioside and rebaudioside A contents and yields were evaluated. The doses of nitrogen fertilization did not affect the variables related to dry weight yield, stevioside and rebaudioside A contents and yields, or rebaudioside A:stevioside ratio in stevia genotype 8 (G8), grown under decreasing photoperiods.
- Open Access
- 11 May 2020
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 42, e5
Antimicrobial activity and cellulose acetate membrane characterization with tangerine peel extract (Citrus reticulata) for bio packing
Biopacking material was obtained by incorporating tangerine peel extract (Citrus reticulata) in cellulose acetate (CA) film. The acetate film with tangerine extract was shown to have a homogeneous material characteristic by FTIR and DSC analysis, being reinforced in MEV and MFA, and showed absence of pores in the film with extract. These characteristics justify the reduced water absorption and release of the CA membrane extract. Low water absorption is important for the film to act as a barrier with external environment and the release of the extract was sufficient to prevent the growth of the strains investigated on the sample surface. The introduction of the extract also reduced the tensile strength and deformation of the film. This study showed the good potential of biomass for active bio packing that can gradually replace non-renewable packaging and take advantage of agricultural waste.
- 11 May 2020
- Published by Universidade Federal de Santa Maria in Ciência e Natura
- Vol. 42, e5
Open AccessAntimicrobial activity and cellulose acetate membrane characterization with tangerine peel extract (Citrus reticulata) for bio packing
Biopacking material was obtained by incorporating tangerine peel extract (Citrus reticulata) in cellulose acetate (CA) film. The acetate film with tangerine extract was shown to have a homogeneous material characteristic by FTIR and DSC analysis, being reinforced in MEV and MFA, and showed absence of pores in the film with extract. These characteristics justify the reduced water absorption and release of the CA membrane extract. Low water absorption is important for the film to act as a barrier with external environment and the release of the extract was sufficient to prevent the growth of the strains investigated on the sample surface. The introduction of the extract also reduced the tensile strength and deformation of the film. This study showed the good potential of biomass for active bio packing that can gradually replace non-renewable packaging and take advantage of agricultural waste.
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 92 (1) , e20180793
Anti-hyperalgesic properties of ethanolic crude extract from the peels of Citrus reticulata (Rutaceae)
The therapeutic effects from Citrus reticulata on painful inflammatory ailments are associated to its flavonoids constituent and phytochemical studies with Citrus genus affirm that the peels have important amounts of it. These bioactive compounds have been a considerable therapeutic source and evaluate potential application of the peel extract is significant. This research aims to investigate the influence of ethanolic crude extract from the peels of Citrus reticulata and its possible mechanism of action in different animal models of pain. The extract reduced hyperalgesia in the second phase of formalin test (vehicle: 501.5 ± 40.0 s; C. reticulata extract 300 mg/kg: 161.8 ± 41.1 s), in the carrageenan model (vehicle at 4th h: 82.5 ± 9.6 %; C. reticulata extract 300 mg/kg at 4th h: 47.5 ± 6.5 %) and in Complete Freund’s Adjuvant model (vehicle: 501.5 ± 40.0 s; C. reticulata extract 300 mg/kg: 161.8 ± 41.1 s). The possible contribution of opioidergic and adenosinergic systems in the anti-hyperalgesic effect of C. reticulata extract was observed after treatment, with non-selective antagonists for both systems, which produced reversal effects. In conclusion, these properties of C. reticulata extract suggest a potential therapeutic benefit in treating painful conditions.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 92 (1) , e20180793
Open AccessAnti-hyperalgesic properties of ethanolic crude extract from the peels of Citrus reticulata (Rutaceae)
The therapeutic effects from Citrus reticulata on painful inflammatory ailments are associated to its flavonoids constituent and phytochemical studies with Citrus genus affirm that the peels have important amounts of it. These bioactive compounds have been a considerable therapeutic source and evaluate potential application of the peel extract is significant. This research aims to investigate the influence of ethanolic crude extract from the peels of Citrus reticulata and its possible mechanism of action in different animal models of pain. The extract reduced hyperalgesia in the second phase of formalin test (vehicle: 501.5 ± 40.0 s; C. reticulata extract 300 mg/kg: 161.8 ± 41.1 s), in the carrageenan model (vehicle at 4th h: 82.5 ± 9.6 %; C. reticulata extract 300 mg/kg at 4th h: 47.5 ± 6.5 %) and in Complete Freund’s Adjuvant model (vehicle: 501.5 ± 40.0 s; C. reticulata extract 300 mg/kg: 161.8 ± 41.1 s). The possible contribution of opioidergic and adenosinergic systems in the anti-hyperalgesic effect of C. reticulata extract was observed after treatment, with non-selective antagonists for both systems, which produced reversal effects. In conclusion, these properties of C. reticulata extract suggest a potential therapeutic benefit in treating painful conditions.
- Open Access
- 1 May 2019
- Published by Universidad Pedagogica y Tecnologica de Colombia in Revista Colombiana de Ciencias Hortícolas
- Vol. 13 (2) , 303-311
Phenotypic performance of four stevia genotypes in the Alto Vale do Itajaí region, Brazil
An evaluation of four stevia genotypes for biomass yield, stevioside and rebaudioside A content and yield under decreasing photoperiod conditions was carried out in the Alto Vale do Itajaí region, located in the State of Santa Catarina (SC), Brazil. This field experiment was conducted at Site São Miguel, a farm located in the city of Lontras (SC), Brazil, under conditions of decreasing photoperiods, with a variation of 13.72 h of light at experiment implantation to 12.57 h of light at the end of the evaluations. The treatments consisted of four genotypes (G4, G8, G9 and G12) provided by EMBRAPA-CENARGEN. A randomized complete block design with four treatments (stevia genotypes) and four replications was used. Each plot consisted of 21 plants, and the floor area had five plants. G12 had the highest leaf dry weight (LDW), total leaf area, leaf area index, leaf area ratio and specific leaf area of all the genotypes. G4 and G12 were equal for LDW and were higher than the other genotypes, with yields of 755.6 and 836.4 kg ha-1, respectively. The stevioside content was highest in G12 (200.07 mg g-1). G8 and G9 were similar for rebaudioside A content (64.77 and 49.05 mg g-1, respectively). The rebaudioside A: stevioside ratio was highest in G8 (0.44 g g-1). No genotype had a rebaudioside A: stevioside ratio suitable for industry requirements.
- 1 May 2019
- Published by Universidad Pedagogica y Tecnologica de Colombia in Revista Colombiana de Ciencias Hortícolas
- Vol. 13 (2) , 303-311
Open AccessPhenotypic performance of four stevia genotypes in the Alto Vale do Itajaí region, Brazil
An evaluation of four stevia genotypes for biomass yield, stevioside and rebaudioside A content and yield under decreasing photoperiod conditions was carried out in the Alto Vale do Itajaí region, located in the State of Santa Catarina (SC), Brazil. This field experiment was conducted at Site São Miguel, a farm located in the city of Lontras (SC), Brazil, under conditions of decreasing photoperiods, with a variation of 13.72 h of light at experiment implantation to 12.57 h of light at the end of the evaluations. The treatments consisted of four genotypes (G4, G8, G9 and G12) provided by EMBRAPA-CENARGEN. A randomized complete block design with four treatments (stevia genotypes) and four replications was used. Each plot consisted of 21 plants, and the floor area had five plants. G12 had the highest leaf dry weight (LDW), total leaf area, leaf area index, leaf area ratio and specific leaf area of all the genotypes. G4 and G12 were equal for LDW and were higher than the other genotypes, with yields of 755.6 and 836.4 kg ha-1, respectively. The stevioside content was highest in G12 (200.07 mg g-1). G8 and G9 were similar for rebaudioside A content (64.77 and 49.05 mg g-1, respectively). The rebaudioside A: stevioside ratio was highest in G8 (0.44 g g-1). No genotype had a rebaudioside A: stevioside ratio suitable for industry requirements.
- 1 October 2018
- Published by Elsevier in Industrial Crops and Products
- Vol. 122, 148-155
Piper ovatum (Piperaceae) extract/starch-cellulose films to control Aedes aegypti (Diptera: Culicidae) larvae
- 1 October 2018
- Published by Elsevier in Industrial Crops and Products
- Vol. 122, 148-155
Piper ovatum (Piperaceae) extract/starch-cellulose films to control Aedes aegypti (Diptera: Culicidae) larvae
- 1 November 2014
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 44, 225-233
Production and characterization of cornstarch/cellulose acetate/silver sulfadiazine extrudate matrices
- 1 November 2014
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 44, 225-233
Production and characterization of cornstarch/cellulose acetate/silver sulfadiazine extrudate matrices