UNUdaysankar S. Nair

Udaysankar S. Nair

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Udaysankar S. Nair has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bi‐Hourly Changes in Land‐Atmosphere Coupling Metrics and Convective Environments During GRAINEX

    by Daniel Whitesel, Rezaul Mahmood, Paul Flanagan, Chris Phillips, Joshua K. Roundy, Roger A. Pielke, Udaysankar Nair, Eric Rappin

    Land use land cover change and irrigation plays an important role in modulating weather and climate. This research uses data from a field campaign, named, the Great Plains Irrigation Experiment (GRAINEX), conducted over southeastern Nebraska, and quantifies the impacts of irrigation on bi‐hourly evolution of the convective environment. The study used the Convective Triggering Potential (CTP) and Low‐Level Humidity Index (HI low ), and the Lifting Condensation Level (LCL) Deficit for this purpose. The data were analyzed by Intensive Observation Period (IOP; IOP1 vs. IOP2), by cloud cover (clear vs. non‐clear days), and by both IOP and cloud cover. The study found that daytime evolution started with high CTP in the morning, lower CTP at midday, and higher CTP in the late afternoon and evening hours. During IOP2, regardless of time‐of‐day compared to non‐irrigated land use, CTP was higher over irrigated land use and it coincided with widespread irrigation. CTP was much higher during early morning (0700 LST), late afternoon (1700 LST) and early evenings (1900 LST). Irrigation's influence on CTP is even more apparent for all times during the clear days of IOP2. In addition, regardless of cloudy or non‐cloudy conditions, HI low values over irrigated areas were lower at all hours during IOP2. Average LCL deficit declined for most hours over irrigated land use during IOP2. In combination with higher CTP, lower HI low and a lower LCL deficit, it is clear that regardless of background conditions irrigation provides a favorable environment for convection development and precipitation.

  • Open Access

    An investigation of the impact of Canadian wildfires on US air quality using model, satellite, and ground measurements

    by Zhixin Xue, Nair Udaysankar, Sundar A. Christopher

    Canadian wildfires transport large concentrations of particulate matter into the US, leading to various effects on the surface temperature, the radiation balance, and visibility and exacerbating pollution-related respiratory conditions. Using a combination of surface, satellite, and numerical models, this study quantifies the increase in surface fine particulate matter (PM2.5) in the continental US due to long-range transported smoke from Canadian wildfires during a wildfire episode from 9–25 August 2018. As a widely used indicator of surface pollution levels, satellite-retrieved aerosol optical depth (AOD) can provide crucial information on columnar pollution mass. However, the daily spatial coverage of satellite AOD is restricted due to cloud cover. In order to quantify the daily changes in surface pollution, we fill in the AOD gaps by utilizing simulated 10 km spatial resolution AOD from a chemistry transport model (CTM). Meteorological variables influencing smoke transport were also integrated alongside the gap-filled AOD product to estimate surface PM2.5 using geographically weighted regression (GWR) and random forest (RF) models. The model with better performance was subsequently applied to quantify PM2.5 changes due to Canadian wildfires. To isolate the impact of Canadian wildfires, we calculate the surface PM2.5 ratio with and without Canadian fire sources by conducting two CTM simulations: one with Canadian wildfire emissions enabled and another with these emissions turned off. Our results show that Canadian wildfires caused a significant increase in surface PM2.5, contributing up to 28 µg m−3 (a 69 % increase) across different US Environmental Protection Agency (EPA) regions during the August 2018 wildfire event.


  • Open Access

    Soil Temperature, Environment, and Moisture Monitoring Network—a low-cost sensing network for Alabama

    by Nick Perlaky, W. Lee Ellenburg, Udaysankar Nair, Nick Klein, Michael B. Solomon

    In order to bolster drought assessment and forecasting capabilities in Alabama, The University of Alabama in Huntsville has developed a network of rapidly deployable, low-cost soil moisture, temperature, and environment monitoring stations (STEMMNet). This network provides near-real-time transmission of in-situ sensed, high temporal resolution soil data, offering an extension beyond climatological analysis into operational use. Stations are manufactured using commercially available, inexpensive hardware and use low-cost sensors which demonstrated comparable accuracy when evaluated against an existing research-grade soil moisture network. Months of testing in a variety of environments allowed for several system optimizations, yielding a robust network with a high uptime. Collaborations with outside agencies including Alabama Forestry and select National Weather Service offices proved the versatility and need for this network. This study aims to outline the design process, data flow, lab, and comparative performance analysis, network design, and outcomes of STEMMNet. Overall, the network has performed well and demonstrates the ability to obtain high-quality soil data from a low-cost, minimal footprint, rapidly deployable station.


  • Open Access

    Comprehensive Validation of the Prithvi WxC FM Through Atmospheric Process Analysis

    by Ankur Kumar, Sujit Roy, Udaysankar Nair, Manil Maskey, Rahul Ramachandran

    Weather Foundation Models in general represent a significant advancement in computational weather prediction by leveraging data-driven techniques to improve accuracy and speed. This study evaluates the Prithvi WxC foundation model for weather and climate by systematically assessing its adherence to fundamental physical constraints governing atmospheric processes. While traditional model validation primarily focuses on error statistics of modeled fields, this work takes a more comprehensive approach, incorporating a series of process-based tests to ensure the model's consistency with key atmospheric principles.We first test the model's compliance with conservation of mass, ensuring that it respects the fundamental principle that mass is neither created nor destroyed within the atmosphere. Next, we examine the model's representation of geostrophic balance, critical for large-scale flow, by evaluating the relationship between the pressure gradient and the Coriolis force. The hypsometric equation is also applied to assess the vertical consistency of the model’s simulations, verifying that changes in pressure are appropriately related to temperature and height. To further evaluate large-scale flow dynamics, we analyze the model’s consistency with thermal wind relations, ensuring that temperature gradients are correctly reflected in the vertical wind profile. Finally, we tested our model on radiative and convective parameterization by comparing its performance of convection to established methods in conventional weather models, testing its ability to properly simulate convective processes. The results of these tests highlight the Prithvi WxC model's strengths and areas for improvement in terms of physical consistency. By adhering to these atmospheric principles, the findings of this study offer valuable insights into how the model can be refined, enhancing its potential applications in both weather forecasting and climate research.

  • Open Access

    Integrating Prithvi WxC with a Hurricane Intensity Estimation Model for Accurate Hurricane Forecasting

    by Sujit Roy, Ankur Kumar, Rohit Lal, Udaysankar Nair, Manil Maskey, Rahul Ramachandran

    Accurate hurricane intensity estimation is critical for disaster preparedness, yet remains challenging for weather models trained on coarse-resolution datasets. This study proposes a hybrid approach that integrates NASA-IBM's Prithvi WxC model with a deep learning-based Hurricane Intensity Estimation (HIE) model. While the Prithvi WxC model excels in global atmospheric predictions, its coarse-grained outputs can struggle with precise hurricane intensity estimation. To address this, the HIE model is triggered when it identifies a hurricane in the Prithvi model output, providing corrected intensity predictions based on high-resolution data.A dataset was created for training and evaluation, consisting of 6,000 unique initial conditions from 1980 to 2024 that resulted in hurricanes across all major basins. Ground truth hurricane tracks and intensity data were obtained from the HURDAT database The training phase focused on hurricane cases from 1980 to 2000, building a foundational understanding of global hurricane characteristics. Subsequently, the model was fine-tuned with 2000–2020 data to account for basin-specific variations and improve regional accuracy. The remaining cases (2020–2024) are reserved for validation and assessment. The HIE model employs advanced deep learning techniques to refine key intensity metrics, such as maximum sustained wind speeds and central pressure. By addressing the limitations of Prithvi WxC's coarse-resolution training data, the HIE model achieves greater precision, leveraging fine-grained atmospheric and oceanographic features. This two-step framework, hurricane detection by Prithvi WxC followed by intensity refinement by the HIE model, capitalizes on the strengths of both models to deliver improved predictions.This highlights the potential of combining foundation models like Prithvi WxC with specialized deep-learning frameworks to overcome existing limitations in hurricane intensity estimation. By incorporating diverse data sources and leveraging modern machine-learning techniques, this hybrid approach bridges the gap between coarse-grained global models and the need for precise regional forecasting.

  • Open Access

    Reply on RC2

    by Zhixin Xue, Nair Udaysankar, Sundar Christopher

    Canadian wildfires transport large concentrations of particulate matter into the United States, leading to various impacts on surface temperature, radiation balance, visibility, and exacerbating pollution-related respiratory conditions. Using a combination of surface, satellite and numerical models, this study quantifies the increase in surface fine particulate matter (PM2.5) in the Continental United States due to long-range transported smoke from Canadian wildfires during a wildfire episode from August 9th to 25th, 2018. As a widely used indicator of surface pollution levels, satellite-retrieved AOD can provide crucial information on columnar pollution mass. However, the daily spatial coverage of satellite AOD is restricted due to cloud cover. In order to quantify the daily changes of surface pollution, we fill in the AOD gaps by utilizing simulated 10-m spatial resolution AOD from a chemistry transport model (CTM). In addition, different processes affecting smoke vertical and horizontal transport are examined using two CTM simulations. Meteorological variables associated with these processes are then selected along with the gap-filled AOD product to assess the surface pollution using geographically weighted regression (GWR) and random forest (RF) models. It is found that synoptic pressure systems dominate the horizontal transport of Canadian smoke, and the ascending air and robust winds from a low-pressure system contributes to the long distances of the transport path. Other processes affecting the vertical distribution of pollutants, including boundary layer entrainment, precipitation and terrain-induced vertical mixing are also analyzed in this paper. Our results show that Canadian fires caused a substantial increase in total PM2.5, reaching up to 13 % (62 μgm−3) across different US EPA regions during 2018 August wildfire event.

  • Open Access

    Reply on RC1

    by Zhixin Xue, Nair Udaysankar, Sundar Christopher

    Canadian wildfires transport large concentrations of particulate matter into the United States, leading to various impacts on surface temperature, radiation balance, visibility, and exacerbating pollution-related respiratory conditions. Using a combination of surface, satellite and numerical models, this study quantifies the increase in surface fine particulate matter (PM2.5) in the Continental United States due to long-range transported smoke from Canadian wildfires during a wildfire episode from August 9th to 25th, 2018. As a widely used indicator of surface pollution levels, satellite-retrieved AOD can provide crucial information on columnar pollution mass. However, the daily spatial coverage of satellite AOD is restricted due to cloud cover. In order to quantify the daily changes of surface pollution, we fill in the AOD gaps by utilizing simulated 10-m spatial resolution AOD from a chemistry transport model (CTM). In addition, different processes affecting smoke vertical and horizontal transport are examined using two CTM simulations. Meteorological variables associated with these processes are then selected along with the gap-filled AOD product to assess the surface pollution using geographically weighted regression (GWR) and random forest (RF) models. It is found that synoptic pressure systems dominate the horizontal transport of Canadian smoke, and the ascending air and robust winds from a low-pressure system contributes to the long distances of the transport path. Other processes affecting the vertical distribution of pollutants, including boundary layer entrainment, precipitation and terrain-induced vertical mixing are also analyzed in this paper. Our results show that Canadian fires caused a substantial increase in total PM2.5, reaching up to 13 % (62 μgm−3) across different US EPA regions during 2018 August wildfire event.

  • Open Access

    Reply on RC3

    by Zhixin Xue, Nair Udaysankar, Sundar Christopher

    Canadian wildfires transport large concentrations of particulate matter into the United States, leading to various impacts on surface temperature, radiation balance, visibility, and exacerbating pollution-related respiratory conditions. Using a combination of surface, satellite and numerical models, this study quantifies the increase in surface fine particulate matter (PM2.5) in the Continental United States due to long-range transported smoke from Canadian wildfires during a wildfire episode from August 9th to 25th, 2018. As a widely used indicator of surface pollution levels, satellite-retrieved AOD can provide crucial information on columnar pollution mass. However, the daily spatial coverage of satellite AOD is restricted due to cloud cover. In order to quantify the daily changes of surface pollution, we fill in the AOD gaps by utilizing simulated 10-m spatial resolution AOD from a chemistry transport model (CTM). In addition, different processes affecting smoke vertical and horizontal transport are examined using two CTM simulations. Meteorological variables associated with these processes are then selected along with the gap-filled AOD product to assess the surface pollution using geographically weighted regression (GWR) and random forest (RF) models. It is found that synoptic pressure systems dominate the horizontal transport of Canadian smoke, and the ascending air and robust winds from a low-pressure system contributes to the long distances of the transport path. Other processes affecting the vertical distribution of pollutants, including boundary layer entrainment, precipitation and terrain-induced vertical mixing are also analyzed in this paper. Our results show that Canadian fires caused a substantial increase in total PM2.5, reaching up to 13 % (62 μgm−3) across different US EPA regions during 2018 August wildfire event.

  • Open Access

    Pretraining a foundation model using MODIS observations of the earth’s atmosphere

    by Valentine Anantharaj, Takuya Kurihana, Gabriele Padovani, Ankur Kumar, Aristeidis Tsaris, Udaysankar Nair, Sandro Fiore, Ian Foster

    Pretraining a foundation model using MODIS observations of the earth’s atmosphere The earth and atmospheric sciences research community has an unprecedented opportunity to exploit the vast amount of data available from earth observation (EO) satellites and earth system models (ESM). Smaller and cheaper satellites with reduced operational costs have made a variety of EO data affordable, and technological advances have made the data accessible to a wide range of stakeholders, especially the scientific community (EY, 2023). The NASA ESDS program alone is expected to host 320 PB of data by 2030 (NASA ESDS, 2023). The ascent and application of artificial intelligence foundation models (FM) can be attributed to the availability of large volumes of curated data, accessibility to extensive compute resources and the maturity of deep learning architectures, especially the transformer (Bommasani et al., 2021). Developing a foundation model involves pretraining a suitable deep learning architecture with large amounts of data, often via self supervised learning (SSL) methods. The pretrained models can then be adapted to downstream tasks via fine tuning, requiring less amount of data than task-specific models. Large language models (LLM) are likely the most common type of foundation encountered by the general public. Vision transformers (ViT) are based on the LLM architecture and adapted for image and image-like data (Dosovitskiy, et. al., 2020), such as EO data and ESM simulation output. We are in the process of pretraining a ViT model for the earth’s atmosphere using a select few bands of 1-km Level-1B MODIS radiances and brightness temperatures, MOD021KM and MYD021KM from the NASA Terra and Aqua satellites respectively. We are using 200 million image chips of size 128x128 pixels. We are pretraining two ViT models of sizes 100 million and 400 million parameters respectively. The pretrained models will be finetuned for cloud classification and evaluated against AICCA. We will discuss our experiences involving data and computing, and present preliminary results. ReferencesBommasani R, Hudson DA, Adeli E, Altman R, Arora S, et al: On the opportunities and risks of foundation models. CoRR abs/2108.07258. https://arxiv.org/abs/2108.07258, 2021. Dosovitskiy, A., Beyer, L., Kolesnikov, A., Weissenborn, D., Zhai, X., Unterthiner, T., Dehghani, M., Minderer, M., Heigold, G., Gelly, S. and Uszkoreit, J.: An image is worth 16x16 words: Transformers for image recognition at scale. arXiv preprint arXiv:2010.11929, 2020.Ernst & Young (EY): How can the vantage of space give you strategic advantage on Earth? https://www.ey.com/en_gl/technology/how-can-the-vantage-of-space-give-you-strategic-advantage-on-earth, 2023. Accessed 10 January 2024.Kurihana, Takuya, Elisabeth J. Moyer, and Ian T. Foster: AICCA: AI-Driven Cloud Classification Atlas. Remote Sensing 14, no. 22: 5690. https://doi.org/10.3390/rs14225690, 2022.NASA MODIS: MODIS - Level 1B Calibrated Radiances. DOI: 10.5067/MODIS/MOD021KM.061 and DOI: 10.5067/MODIS/MYD021KM.061NASA ESDS: Earthdata Cloud Evolution https://www.earthdata.nasa.gov/eosdis/cloud-evolution. Accessed 10 January 2024.Vaswani A, Shazeer N, Parmar N, Uszkoreit J, Jones L, Gomez AN, Kaiser Ł, Polosukhin I: Attention is all you need. Adv Neural Inf Process Syst 30, 2017.

  • Open Access

    Comment on egusphere-2024-1781

    by Zhixin Xue, Nair Udaysankar, Sundar Christopher

    Canadian wildfires transport large concentrations of particulate matter into the United States, leading to various impacts on surface temperature, radiation balance, visibility, and exacerbating pollution-related respiratory conditions. Using a combination of surface, satellite and numerical models, this study quantifies the increase in surface fine particulate matter (PM2.5) in the Continental United States due to long-range transported smoke from Canadian wildfires during a wildfire episode from August 9th to 25th, 2018. As a widely used indicator of surface pollution levels, satellite-retrieved AOD can provide crucial information on columnar pollution mass. However, the daily spatial coverage of satellite AOD is restricted due to cloud cover. In order to quantify the daily changes of surface pollution, we fill in the AOD gaps by utilizing simulated 10-m spatial resolution AOD from a chemistry transport model (CTM). In addition, different processes affecting smoke vertical and horizontal transport are examined using two CTM simulations. Meteorological variables associated with these processes are then selected along with the gap-filled AOD product to assess the surface pollution using geographically weighted regression (GWR) and random forest (RF) models. It is found that synoptic pressure systems dominate the horizontal transport of Canadian smoke, and the ascending air and robust winds from a low-pressure system contributes to the long distances of the transport path. Other processes affecting the vertical distribution of pollutants, including boundary layer entrainment, precipitation and terrain-induced vertical mixing are also analyzed in this paper. Our results show that Canadian fires caused a substantial increase in total PM2.5, reaching up to 13 % (62 μgm−3) across different US EPA regions during 2018 August wildfire event.