Masoud Najaf Najafi
Research Subjects
Masoud Najaf Najafi has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Arash Koocheki
Department of Food Science and Technology, Ferdowsi University of Mashhad, Mashhad, Iran
4 shared publications - Rassoul Kadkhodaee
Research Institute of Food Science and Technology (RIFST)
3 shared publications Ali Mohamadi Sani
2 shared publicationsGlyn O. Phillips
Phillips Hydrocolloids Research Centre, NEWI; Wrexham Wales UK
2 shared publications- Nassim Raoufi
Department of Food Science and Biotechnology, Zhejiang Gongshang University, Hangzhou, PR China
2 shared publications - Seyed Ali Mortazavi
Affiliation Faculty of Agriculture, Department of Food Science and Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
2 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 28 January 2026
- Published by Royal Society of Chemistry (RSC) in Sustainable Food Technology
- Vol. 4 (2) , 2129-2145
Optimization of maltodextrin–gum arabic–whey protein systems for freeze-drying microencapsulation of young barley leaf extract
Young barley leaves are rich in bioactive compounds but highly prone to oxidation, necessitating stabilization for functional food applications. This study encapsulated barley leaf extract using maltodextrin (MD), whey protein isolate (WPI), and gum arabic (GA), and optimized wall-material ratios through freeze-drying and response surface methodology (RSM). Model fitting confirmed strong statistical performance, with significant quadratic models (p < 0.05), non-significant lack-of-fit, R2 values up to 0.99, and adequate precision above 40, ensuring reliable prediction across the design space. Experimentally, MD-rich formulations achieved the highest microencapsulation yield (∼89%), while encapsulation efficiency (83.67–89.98%) maximized in a ternary MD–WPI–GA blend (67.66 : 16.67 : 16.67). Moisture content (10.22–11.29%), water activity (0.34–0.40), and particle size (34.50–37.59 µm) indicated good storage stability and structural integrity. Solubility reached 75.29% in MD–GA systems, and the highest glass transition temperature occurred in the ternary blend, reflecting enhanced thermal stability. Bioactive preservation was substantial, with total phenolic content (∼70 mg GAE per g) and antioxidant activity (∼80%) maintained effectively. Overall, MD contributed to high yield, GA to emulsion stability, and WPI to improved film-forming and antioxidant protection. The optimized microcapsules demonstrated strong stability and functional potential for use in nutraceuticals, functional foods, and instant beverage formulations.
- 28 January 2026
- Published by Royal Society of Chemistry (RSC) in Sustainable Food Technology
- Vol. 4 (2) , 2129-2145
Top Cited PapersOpen AccessOptimization of maltodextrin–gum arabic–whey protein systems for freeze-drying microencapsulation of young barley leaf extract
Young barley leaves are rich in bioactive compounds but highly prone to oxidation, necessitating stabilization for functional food applications. This study encapsulated barley leaf extract using maltodextrin (MD), whey protein isolate (WPI), and gum arabic (GA), and optimized wall-material ratios through freeze-drying and response surface methodology (RSM). Model fitting confirmed strong statistical performance, with significant quadratic models (p < 0.05), non-significant lack-of-fit, R2 values up to 0.99, and adequate precision above 40, ensuring reliable prediction across the design space. Experimentally, MD-rich formulations achieved the highest microencapsulation yield (∼89%), while encapsulation efficiency (83.67–89.98%) maximized in a ternary MD–WPI–GA blend (67.66 : 16.67 : 16.67). Moisture content (10.22–11.29%), water activity (0.34–0.40), and particle size (34.50–37.59 µm) indicated good storage stability and structural integrity. Solubility reached 75.29% in MD–GA systems, and the highest glass transition temperature occurred in the ternary blend, reflecting enhanced thermal stability. Bioactive preservation was substantial, with total phenolic content (∼70 mg GAE per g) and antioxidant activity (∼80%) maintained effectively. Overall, MD contributed to high yield, GA to emulsion stability, and WPI to improved film-forming and antioxidant protection. The optimized microcapsules demonstrated strong stability and functional potential for use in nutraceuticals, functional foods, and instant beverage formulations.
- 1 March 2020
- Published by Elsevier in Journal of Food Protection
- Vol. 83 (3) , 511-517
Preparation of Barije (Ferula gummosa) Essential Oil–Loaded Liposomes and Evaluation of Physical and Antibacterial Effect on Escherichia coli O157:H7
The aim of this study was to load liposomes with Barije (Ferula gummosa) essential oil (EO) and to evaluate their physical and antibacterial properties. Liposomes were produced with specific ratios of lecithin/cholesterol by thin-film hydration and sonication. The chemical composition of the EO was analyzed by gas chromatography and mass spectroscopy. The physical properties of the liposomes (particle size, polydispersity index, zeta potential, and encapsulation efficiency) were evaluated. The antimicrobial effects of these liposomes against Escherichia coli O157:H7 were determined based on the MIC and disk diffusion results. The effect of subinhibitory concentrations (sub-MICs) of EO against the growth of the bacterium over 24 h was evaluated before and after encapsulation. The major components of EO were β-pinene (60.84%) and α-pinene (9.14%). The mean liposome radius of EO-loaded liposomes was 74.27 to 99.93 nm, which was significantly different from that of the empty liposomes (138.76 nm) (P < 0.05). Addition of cholesterol to the lecithin bilayer increased the particle size and reduced the encapsulation efficiency (P < 0.05). The electrostatic stability of the empty liposomes was improved by adding cholesterol, but when the EO was replaced in the liposomes, there was no significant change in electrostatic stability of liposomes with cholesterol (P < 0.05). MICs were 14.5 μg/mL for the EO-loaded nanoliposomes containing 30 mg of lecithin and 30 mg of cholesterol and 10 μg/mL for nonencapsulated EO. This trend was confirmed by measuring the inhibition zone diameter. Sub-MICs of liposomal EO (containing 60 mg of lecithin) decreased bacterial levels to a greater degree than did free EO, especially at 50 and 75% of the MIC. Barije (Ferula gummosa) EO was encapsulated into nanoliposomes. Nanoliposomes with EO had antimicrobial activity against E. coli O157:H7. The highest antimicrobial activity was observed in pure lecithin nanoliposomes. Addition of cholesterol to the nanoliposomes lecithin bilayer increased the particle size. The presence of cholesterol in the nanoliposome reduced the antimicrobial activity.
- 1 March 2020
- Published by Elsevier in Journal of Food Protection
- Vol. 83 (3) , 511-517
Preparation of Barije (Ferula gummosa) Essential Oil–Loaded Liposomes and Evaluation of Physical and Antibacterial Effect on Escherichia coli O157:H7
The aim of this study was to load liposomes with Barije (Ferula gummosa) essential oil (EO) and to evaluate their physical and antibacterial properties. Liposomes were produced with specific ratios of lecithin/cholesterol by thin-film hydration and sonication. The chemical composition of the EO was analyzed by gas chromatography and mass spectroscopy. The physical properties of the liposomes (particle size, polydispersity index, zeta potential, and encapsulation efficiency) were evaluated. The antimicrobial effects of these liposomes against Escherichia coli O157:H7 were determined based on the MIC and disk diffusion results. The effect of subinhibitory concentrations (sub-MICs) of EO against the growth of the bacterium over 24 h was evaluated before and after encapsulation. The major components of EO were β-pinene (60.84%) and α-pinene (9.14%). The mean liposome radius of EO-loaded liposomes was 74.27 to 99.93 nm, which was significantly different from that of the empty liposomes (138.76 nm) (P < 0.05). Addition of cholesterol to the lecithin bilayer increased the particle size and reduced the encapsulation efficiency (P < 0.05). The electrostatic stability of the empty liposomes was improved by adding cholesterol, but when the EO was replaced in the liposomes, there was no significant change in electrostatic stability of liposomes with cholesterol (P < 0.05). MICs were 14.5 μg/mL for the EO-loaded nanoliposomes containing 30 mg of lecithin and 30 mg of cholesterol and 10 μg/mL for nonencapsulated EO. This trend was confirmed by measuring the inhibition zone diameter. Sub-MICs of liposomal EO (containing 60 mg of lecithin) decreased bacterial levels to a greater degree than did free EO, especially at 50 and 75% of the MIC. Barije (Ferula gummosa) EO was encapsulated into nanoliposomes. Nanoliposomes with EO had antimicrobial activity against E. coli O157:H7. The highest antimicrobial activity was observed in pure lecithin nanoliposomes. Addition of cholesterol to the nanoliposomes lecithin bilayer increased the particle size. The presence of cholesterol in the nanoliposome reduced the antimicrobial activity.
- 4 October 2019
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 43 (11)
Optimization of labane (concentrated yogurt) formulation produced by wheyless process using mixture‐process variable experiments
In this study, the effect of milk protein concentrate (MPC), cheese whey powder (CWP) and konjac gum (KG) on physicochemical and rheological properties of labane was investigated. Physicochemical results showed that increasing MPC and decreasing CWP decreased pH (after fifth day) and syneresis. The results of the combination of back extrusion and texture profile analysis indicated that increasing KG significantly increased hardness, adhesiveness and adhesiveness force especially for samples with high amount of CWP but increasing MPC and decreasing CWP decreased cohesiveness in samples with high amount of KG. Strain sweep test of labane indicated that all sample had gel‐like structure at 1 Hz and 20°C. Rheological results also showed that increasing KG significantly increased G′LVE, G″LVE, γc, τy, τf, and Gf especially for samples with high amount of CWP. At the optimized conditions, the predicted responses were determined as MPC 1.47%, CWP 6.52%, and KG 0.18%. Practical applications The physicochemical and rheological properties of products, such as labane, play an important role in processing and consumer acceptability. The determination of the optimum ingredients in formulation provides economic benefits and it can be useful for the food industries that want to use gums as thickening and stabilizing agents in the formulation of food products such as labane. Also mixture‐process variable experiments are a quite effective mathematical approach for the optimization of the processing variables containing mixture components and process factors. So, it could be used efficiently to model the labane formulation.
- 4 October 2019
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 43 (11)
Optimization of labane (concentrated yogurt) formulation produced by wheyless process using mixture‐process variable experiments
In this study, the effect of milk protein concentrate (MPC), cheese whey powder (CWP) and konjac gum (KG) on physicochemical and rheological properties of labane was investigated. Physicochemical results showed that increasing MPC and decreasing CWP decreased pH (after fifth day) and syneresis. The results of the combination of back extrusion and texture profile analysis indicated that increasing KG significantly increased hardness, adhesiveness and adhesiveness force especially for samples with high amount of CWP but increasing MPC and decreasing CWP decreased cohesiveness in samples with high amount of KG. Strain sweep test of labane indicated that all sample had gel‐like structure at 1 Hz and 20°C. Rheological results also showed that increasing KG significantly increased G′LVE, G″LVE, γc, τy, τf, and Gf especially for samples with high amount of CWP. At the optimized conditions, the predicted responses were determined as MPC 1.47%, CWP 6.52%, and KG 0.18%. Practical applications The physicochemical and rheological properties of products, such as labane, play an important role in processing and consumer acceptability. The determination of the optimum ingredients in formulation provides economic benefits and it can be useful for the food industries that want to use gums as thickening and stabilizing agents in the formulation of food products such as labane. Also mixture‐process variable experiments are a quite effective mathematical approach for the optimization of the processing variables containing mixture components and process factors. So, it could be used efficiently to model the labane formulation.
- 9 January 2019
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 43 (2) , e13876
The use ofSaccharomyces cerevisiaeimmobilized on activated alumina, and alumina silicate beads for the reduction of Aflatoxin M1in vitro
This study was aimed to investigate the immobilization of Saccharomyces cerevisiae on two different types of ceramic beads (activated alumina and alumina silicate) and comparing the supports for reduction aflatoxin M1 (AFM1) in vitro. The immobilization of S. cerevisiae was done on ceramic beads for 24 and 48 hr. The best immobilization was achieved at 48 hr. The images of scanning electron microscope confirmed that the immobilization of yeast cells on the activated alumina was better than the alumina silicate (P < 0.05). The ceramic beads with immobilized yeasts were applied to remove the AFM1 from contaminated standard liquid (0.2 µg/L) by 5, 10, and 20 min circulation time. Results showed that the AFM1 concentration in the solution after 20 min circulation was minimal and the highest AFM1 reduction was 75%, when the contaminated solution passed through the activated alumina beads. There was no Si or Al residue in standard liquid. Practical applications This study indicated that the activated alumina and alumina silicate can provide a perfect support for immobilization and the immobilization of Saccharomyces cerevisiae cells on ceramic beads can be used practically to detoxify AFM1‐contaminated liquid food.
- 9 January 2019
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 43 (2) , e13876
The use ofSaccharomyces cerevisiaeimmobilized on activated alumina, and alumina silicate beads for the reduction of Aflatoxin M1in vitro
This study was aimed to investigate the immobilization of Saccharomyces cerevisiae on two different types of ceramic beads (activated alumina and alumina silicate) and comparing the supports for reduction aflatoxin M1 (AFM1) in vitro. The immobilization of S. cerevisiae was done on ceramic beads for 24 and 48 hr. The best immobilization was achieved at 48 hr. The images of scanning electron microscope confirmed that the immobilization of yeast cells on the activated alumina was better than the alumina silicate (P < 0.05). The ceramic beads with immobilized yeasts were applied to remove the AFM1 from contaminated standard liquid (0.2 µg/L) by 5, 10, and 20 min circulation time. Results showed that the AFM1 concentration in the solution after 20 min circulation was minimal and the highest AFM1 reduction was 75%, when the contaminated solution passed through the activated alumina beads. There was no Si or Al residue in standard liquid. Practical applications This study indicated that the activated alumina and alumina silicate can provide a perfect support for immobilization and the immobilization of Saccharomyces cerevisiae cells on ceramic beads can be used practically to detoxify AFM1‐contaminated liquid food.
- 9 June 2016
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 41 (3) , e12975
Changes in Turbidity, Zeta Potential and Precipitation Yield Induced by Persian Gum-Whey Protein Isolate Interactions During Acidification
To measure the molecular parameters of Persian gum (PG) (gathered from Kazeroon plains/Iran) by gel permeation chromatography‐multiangle laser light scattering (GPC‐MALLS), water‐insoluble part of gum was removed using filtration method. In the following, acidification of whey protein isolate/PG mixture solutions (pH ∼ 7.00–2.00) at different biopolymer mixing ratio (r = 0.1–10) was induced by HCl, allowing turbidity, zeta potential and precipitation yield determinations. Contrary to previous studies, it was demonstrated that more than 93% of gum is composed of large water‐insoluble particles and water‐soluble part contains heavy and heterogeneous compounds with high weight‐average molecular mass (up to 5.11 × 106 g/mol) and high dispersity index (∼2.54–6.64). Acid titration of the mixtures displayed that the net neutrality shifts to the higher pHs by increasing the mixing ratio, and the charge neutralization occurs at pHs near pHopt as well. Generally, the maximum interaction was found for a 1:1 WPI/PG mixture with the highest liquid precipitate yield achieved at pH 3.4. Practical Application Persian gum exudes from the wild almond tree (Amygdalus scoparia), growing in the Middle East countries. The characteristics of this hydrocolloid highly depend on the color of exudate and region of the tree. As a mixture with gum Arabic, it has wide industrial and pharmaceutical applications due to economic reasons and high functionality. However, very few scientific information about this gum has been already published. Some researchers have displayed the emulsifier, stabilizer and fat replacer ability of this gum. The interaction of PG with other biopolymers such as proteins would be beneficial in food and pharmaceutical applications in the form of gels, microcapsules, etc. In this study, we have measured the water‐soluble and insoluble fractions and molecular parameters of PG gathered from Kazeroon plains. To have a basic knowledge for our future investigations on encapsulation ability of PG‐WPI complexes, titration method was applied for different PG‐WPI admixtures.
- 9 June 2016
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 41 (3) , e12975
Changes in Turbidity, Zeta Potential and Precipitation Yield Induced by Persian Gum-Whey Protein Isolate Interactions During Acidification
To measure the molecular parameters of Persian gum (PG) (gathered from Kazeroon plains/Iran) by gel permeation chromatography‐multiangle laser light scattering (GPC‐MALLS), water‐insoluble part of gum was removed using filtration method. In the following, acidification of whey protein isolate/PG mixture solutions (pH ∼ 7.00–2.00) at different biopolymer mixing ratio (r = 0.1–10) was induced by HCl, allowing turbidity, zeta potential and precipitation yield determinations. Contrary to previous studies, it was demonstrated that more than 93% of gum is composed of large water‐insoluble particles and water‐soluble part contains heavy and heterogeneous compounds with high weight‐average molecular mass (up to 5.11 × 106 g/mol) and high dispersity index (∼2.54–6.64). Acid titration of the mixtures displayed that the net neutrality shifts to the higher pHs by increasing the mixing ratio, and the charge neutralization occurs at pHs near pHopt as well. Generally, the maximum interaction was found for a 1:1 WPI/PG mixture with the highest liquid precipitate yield achieved at pH 3.4. Practical Application Persian gum exudes from the wild almond tree (Amygdalus scoparia), growing in the Middle East countries. The characteristics of this hydrocolloid highly depend on the color of exudate and region of the tree. As a mixture with gum Arabic, it has wide industrial and pharmaceutical applications due to economic reasons and high functionality. However, very few scientific information about this gum has been already published. Some researchers have displayed the emulsifier, stabilizer and fat replacer ability of this gum. The interaction of PG with other biopolymers such as proteins would be beneficial in food and pharmaceutical applications in the form of gels, microcapsules, etc. In this study, we have measured the water‐soluble and insoluble fractions and molecular parameters of PG gathered from Kazeroon plains. To have a basic knowledge for our future investigations on encapsulation ability of PG‐WPI complexes, titration method was applied for different PG‐WPI admixtures.
- 28 May 2016
- Published by Springer Nature in Fibers and Polymers
- Vol. 17 (5) , 769-777
Optimization of elecrospinning process of zein using central composite design
- 28 May 2016
- Published by Springer Nature in Fibers and Polymers
- Vol. 17 (5) , 769-777
Optimization of elecrospinning process of zein using central composite design
- 23 March 2016
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 51 (5) , 1220-1227
Characterisation of whey protein isolate–gum tragacanth electrostatic interactions in aqueous solutions
Summary: The main objectives of this study were to measure molecular parameters of gum tragacanth by GPC‐MALLS system and investigate the complexation behaviour of whey protein isolate/gum tragacanth mixed dispersions (0.5 wt% total biopolymer concentration) as a function of pH (7.00–2.00) and the biopolymer mixing ratio (r = 0.1–10) using spectrophotometric, zeta potential and precipitate yield determination methods. GPC‐MALLS revealed that gum tragacanth contains relatively heterogeneous particles with high weight‐average and number‐average (Mw = 7.74 × 105 g mol−1 and Mn = 3.87 × 105 g mol−1) molecular mass and high dispersity index (~2.04 ± 0.3). Results of complexation displayed that as the biopolymer mixing ratio increases, the net neutrality shifts to the higher pHs. The critical values associated with the complex structure formation were found at r = 2 in which the charge density of the mixture was near zero at a wide range of pH (3.0–4.0). However, the highest precipitate yield achieved in pH 3.4.
- 23 March 2016
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 51 (5) , 1220-1227
Characterisation of whey protein isolate–gum tragacanth electrostatic interactions in aqueous solutions
Summary: The main objectives of this study were to measure molecular parameters of gum tragacanth by GPC‐MALLS system and investigate the complexation behaviour of whey protein isolate/gum tragacanth mixed dispersions (0.5 wt% total biopolymer concentration) as a function of pH (7.00–2.00) and the biopolymer mixing ratio (r = 0.1–10) using spectrophotometric, zeta potential and precipitate yield determination methods. GPC‐MALLS revealed that gum tragacanth contains relatively heterogeneous particles with high weight‐average and number‐average (Mw = 7.74 × 105 g mol−1 and Mn = 3.87 × 105 g mol−1) molecular mass and high dispersity index (~2.04 ± 0.3). Results of complexation displayed that as the biopolymer mixing ratio increases, the net neutrality shifts to the higher pHs. The critical values associated with the complex structure formation were found at r = 2 in which the charge density of the mixture was near zero at a wide range of pH (3.0–4.0). However, the highest precipitate yield achieved in pH 3.4.
- 3 September 2015
- Published by Taylor & Francis in Journal of Essential Oil Bearing Plants
- Vol. 18 (5) , 1157-1164
Antimicrobial Activity and Composition of Essential Oil fromEchinophora platyloba
- 3 September 2015
- Published by Taylor & Francis in Journal of Essential Oil Bearing Plants
- Vol. 18 (5) , 1157-1164
Antimicrobial Activity and Composition of Essential Oil fromEchinophora platyloba