Meng Xia
Research Subjects
Meng Xia has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Panos J. Antsaklis
Department of Electrical Engineering, University of Notre Dame, Notre Dame, IN, USA
8 shared publications- Arash Rahnama
Department of Electrical Engineering, University of Notre Dame, Notre Dame, IN United States of America 46556
4 shared publications Feng Zhu
Department of Electrical Engineering, University of Notre Dame, IN 46556, USA
4 shared publications- Panagiotis Antsaklis
Department of Obstetrics and Gynecology, ‘Alexandra’ General Hospital, National and Kapodistrian University of Athens, 80 Vasilissis Sofias Avenue, 11528 Athens, Greece
4 shared publications - Vijay Gupta
Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN, USA
3 shared publications Han Yu
2 shared publications
Latest Publications
- 12 October 2020
- Published by Wiley in International Journal of Robust and Nonlinear Control
- Vol. 30 (18) , 7857-7882
Sector bounds in stability analysis and control design
Summary: The sector stability theorem is an intuitive condition for the stability of feedback loops that unifies many lines of research including robust control and the theory of passive and dissipative systems. Applying this theorem typically requires checking or enforcing sector bounds on linear time‐invariant systems. This article discusses practical and efficient numerical methods for performing these tasks. We derive a frequency‐domain test for sector boundedness and use it to develop O(n3) numerical algorithms for computing the relative or directional indices of sector bounds. We also discuss how such algorithms can be combined with nonsmooth optimization techniques to enforce sector bounds while designing and tuning controllers. Several application examples illustrate the potential of these tools and techniques.
- 12 October 2020
- Published by Wiley in International Journal of Robust and Nonlinear Control
- Vol. 30 (18) , 7857-7882
Sector bounds in stability analysis and control design
Summary: The sector stability theorem is an intuitive condition for the stability of feedback loops that unifies many lines of research including robust control and the theory of passive and dissipative systems. Applying this theorem typically requires checking or enforcing sector bounds on linear time‐invariant systems. This article discusses practical and efficient numerical methods for performing these tasks. We derive a frequency‐domain test for sector boundedness and use it to develop O(n3) numerical algorithms for computing the relative or directional indices of sector bounds. We also discuss how such algorithms can be combined with nonsmooth optimization techniques to enforce sector bounds while designing and tuning controllers. Several application examples illustrate the potential of these tools and techniques.
- 23 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 64 (6) , 2590-2597
A QSR-Dissipativity Based Design for Event-Triggered Networked Systems
Compositional control methods are well-suited for the design of large-scale control systems. QSR-Dissipativity and passivity are closely related to stability and may be utilized to show Lyapunov and finite-gain stability for dynamical systems under certain conditions. Additionally, passivity is preserved under feedback and parallel interconnections of passive systems and may be utilized to build larger stable systems. In this paper, we present a QSR-Dissipativity and passivity based analysis for event-triggered Networked Control Systems (NCSs). We characterize QSR-Dissipativity, passivity, and stability conditions for an event-triggered NCS in cases where an input-output event- triggering sampler is located on the plant's side, controller's side, or both sides leading to a considerable decrease in the communication load among sub-units. We calculate passivity levels for the entire networked control system. We show that the general passivity and stability conditions of the NCS depend on passivity properties of the plant and controller. Our results illustrate the trade-offs amongst passivity levels, stability and the rates of communication between sub-systems.
- 23 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 64 (6) , 2590-2597
A QSR-Dissipativity Based Design for Event-Triggered Networked Systems
Compositional control methods are well-suited for the design of large-scale control systems. QSR-Dissipativity and passivity are closely related to stability and may be utilized to show Lyapunov and finite-gain stability for dynamical systems under certain conditions. Additionally, passivity is preserved under feedback and parallel interconnections of passive systems and may be utilized to build larger stable systems. In this paper, we present a QSR-Dissipativity and passivity based analysis for event-triggered Networked Control Systems (NCSs). We characterize QSR-Dissipativity, passivity, and stability conditions for an event-triggered NCS in cases where an input-output event- triggering sampler is located on the plant's side, controller's side, or both sides leading to a considerable decrease in the communication load among sub-units. We calculate passivity levels for the entire networked control system. We show that the general passivity and stability conditions of the NCS depend on passivity properties of the plant and controller. Our results illustrate the trade-offs amongst passivity levels, stability and the rates of communication between sub-systems.
- 4 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 63 (9) , 2987-2993
Control Design Using Passivation for Stability and Performance
A method to passivate a given system by using an input-output transformation matrix is introduced. This matrix generalizes the commonly used methods of series, feedback and feedforward to passivate a linear or nonlinear system. Through an appropriate design of this matrix, positive passivity indices can be guaranteed for the system. Further, this transformation matrix allows the use of a non-passive system as a controller to guarantee the passivity and finite-gain L2 stability of a negative feedback configuration. The passivation parameters can be selected to improve system performance. The results are illustrated by considering nonlinear systems and linear systems with input/output delay. To validate the theory, simulation results in CarSim and Simulink are presented.
- 4 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 63 (9) , 2987-2993
Control Design Using Passivation for Stability and Performance
A method to passivate a given system by using an input-output transformation matrix is introduced. This matrix generalizes the commonly used methods of series, feedback and feedforward to passivate a linear or nonlinear system. Through an appropriate design of this matrix, positive passivity indices can be guaranteed for the system. Further, this transformation matrix allows the use of a non-passive system as a controller to guarantee the passivity and finite-gain L2 stability of a negative feedback configuration. The passivation parameters can be selected to improve system performance. The results are illustrated by considering nonlinear systems and linear systems with input/output delay. To validate the theory, simulation results in CarSim and Simulink are presented.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6082-6087
A passivity-based self-triggered strategy for cyber physical systems under denial-of-service attack
Networked control systems are vulnerable to adversarial attacks, such as Denial-of-Service (DoS) attacks, which intend to jam control channels and hence degrade system performance. In this paper, we design a passivity-based mechanism that preserves the security level and control performance under time-varying delays and control packets dropouts. We develop a switching controller framework over an imperfect network and present a class of self-triggered feedback control laws to mitigate DoS attacks with local information. By deducing the maximal tolerant period of each attack, the QSR-dissipativity and hence L2 stability is preserved under the proposed triggering conditions.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6082-6087
A passivity-based self-triggered strategy for cyber physical systems under denial-of-service attack
Networked control systems are vulnerable to adversarial attacks, such as Denial-of-Service (DoS) attacks, which intend to jam control channels and hence degrade system performance. In this paper, we design a passivity-based mechanism that preserves the security level and control performance under time-varying delays and control packets dropouts. We develop a switching controller framework over an imperfect network and present a class of self-triggered feedback control laws to mitigate DoS attacks with local information. By deducing the maximal tolerant period of each attack, the QSR-dissipativity and hence L2 stability is preserved under the proposed triggering conditions.
- 16 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 63 (9) , 2755-2770
Passivity-Based Design for Event-Triggered Networked Control Systems
In this paper, we introduce a passivity-based design framework for event-triggered networked control systems. We consider the effects of network induced time-delays, signal quantization and data loss in communication links between the plant and controller and show L2-stability and robustness for the control design. We introduce simple asynchronous triggering conditions that do not rely on the exact knowledge of the systems' dynamics and are located on both sides of the communication network. This leads to a great decrease in the communication rate between systems. Additionally, we show lower-bounds on inter-event time intervals for the triggering conditions and characterize the design's robustness against external disturbances. We illustrate the relationship amongst stability, robustness and passivity levels of plant and controller. Moreover, we analyze our design's robustness against packet dropouts. Lastly, we calculate the passivity levels for the entire event-triggered networked control system. This is beneficial in design of compositional networked control systems. Our results are design-oriented. By following our proposed framework, the designer can character
- 16 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 63 (9) , 2755-2770
Passivity-Based Design for Event-Triggered Networked Control Systems
In this paper, we introduce a passivity-based design framework for event-triggered networked control systems. We consider the effects of network induced time-delays, signal quantization and data loss in communication links between the plant and controller and show L2-stability and robustness for the control design. We introduce simple asynchronous triggering conditions that do not rely on the exact knowledge of the systems' dynamics and are located on both sides of the communication network. This leads to a great decrease in the communication rate between systems. Additionally, we show lower-bounds on inter-event time intervals for the triggering conditions and characterize the design's robustness against external disturbances. We illustrate the relationship amongst stability, robustness and passivity levels of plant and controller. Moreover, we analyze our design's robustness against packet dropouts. Lastly, we calculate the passivity levels for the entire event-triggered networked control system. This is beneficial in design of compositional networked control systems. Our results are design-oriented. By following our proposed framework, the designer can character
- Open Access
- 20 July 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 62 (4) , 1729-1741
Networked State Estimation Over a Shared Communication Medium
We consider state estimation for multiple plants across a shared communication network. Each linear time-invariant plant transmits information through the common network according to either a time-triggered or an event-triggered rule. For an event-triggered algorithm with carrier sense multiple access (CSMA), each plant is assumed to access the network based on a priority mechanism. For a time-triggered algorithm combined with time division multiple access (TDMA), each plant uses the network according to a schedule that is decided a priori. Performance in terms of the communication frequency and the estimation error covariance is analytically characterized for event-triggered schemes. Using these characterizations, we show that event-triggered schemes may perform worse than time-triggered schemes when the effect of the communication network is explicitly considered.
- 20 July 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 62 (4) , 1729-1741
Open AccessNetworked State Estimation Over a Shared Communication Medium
We consider state estimation for multiple plants across a shared communication network. Each linear time-invariant plant transmits information through the common network according to either a time-triggered or an event-triggered rule. For an event-triggered algorithm with carrier sense multiple access (CSMA), each plant is assumed to access the network based on a priority mechanism. For a time-triggered algorithm combined with time division multiple access (TDMA), each plant uses the network according to a schedule that is decided a priori. Performance in terms of the communication frequency and the estimation error covariance is analytically characterized for event-triggered schemes. Using these characterizations, we show that event-triggered schemes may perform worse than time-triggered schemes when the effect of the communication network is explicitly considered.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2780-2785
Extremum seeking-based indirect adaptive control for nonlinear systems with time-varying uncertainties
We study in this paper the problem of adaptive trajectory tracking control for nonlinear systems affine in the control with time-varying parametric uncertainties. We propose to use a modular approach, in the sense that we first design a robust nonlinear state feedback which renders the closed loop input to state stable (ISS) between an estimation error of the uncertain parameters and an output tracking error. Next, we complement this robust ISS controller with a model-free extremum seeking (ES) algorithm to estimate the time-varying model uncertainties. The combination of the ISS feedback and the ES algorithm gives an indirect adaptive controller. We show the efficiency of this approach on a two-link robot manipulator example.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2780-2785
Extremum seeking-based indirect adaptive control for nonlinear systems with time-varying uncertainties
We study in this paper the problem of adaptive trajectory tracking control for nonlinear systems affine in the control with time-varying parametric uncertainties. We propose to use a modular approach, in the sense that we first design a robust nonlinear state feedback which renders the closed loop input to state stable (ISS) between an estimation error of the uncertain parameters and an output tracking error. Next, we complement this robust ISS controller with a model-free extremum seeking (ES) algorithm to estimate the time-varying model uncertainties. The combination of the ISS feedback and the ES algorithm gives an indirect adaptive controller. We show the efficiency of this approach on a two-link robot manipulator example.
- 1 July 2015
- Published by Society for Industrial & Applied Mathematics (SIAM)
- p. 319-326
Extremum Seeking-Based Indirect Adaptive Control for Nonlinear Systems with State-Dependent Uncertainties
We study in this paper the problem of adaptive trajectory tracking for nonlinear systems affine in the control with bounded state-dependent uncertainties. We propose to use a modular approach, in the sense that we first design a robust nonlinear state feedback which renders the closed loop input to state stable (ISS) between an estimation error of the uncertain parameters and an output tracking error. Next, we complement this robust ISS controller with a model-free multiparametric extremum seeking (MES) algorithm to estimate the model uncertainties. The combination of the ISS feedback and the MES algorithm gives an indirect adaptive controller. We show the efficiency of this approach on a two-link robot manipulator example.
- 1 July 2015
- Published by Society for Industrial & Applied Mathematics (SIAM)
- p. 319-326
Extremum Seeking-Based Indirect Adaptive Control for Nonlinear Systems with State-Dependent Uncertainties
We study in this paper the problem of adaptive trajectory tracking for nonlinear systems affine in the control with bounded state-dependent uncertainties. We propose to use a modular approach, in the sense that we first design a robust nonlinear state feedback which renders the closed loop input to state stable (ISS) between an estimation error of the uncertain parameters and an output tracking error. Next, we complement this robust ISS controller with a model-free multiparametric extremum seeking (MES) algorithm to estimate the model uncertainties. The combination of the ISS feedback and the MES algorithm gives an indirect adaptive controller. We show the efficiency of this approach on a two-link robot manipulator example.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 722-727
On guaranteeing passivity and performance with a human controller
While designing controllers that guarantee the passivity of a closed loop system has a long history, much less attention has been paid to the situation when the control actions are performed by a human. We consider as an example a human who is driving a car. The behavior of human controllers as drivers has been modeled in the literature as a linear time invariant system cascaded with a time delay. We show that such a human model is not passive. In order to guarantee passivity of a closed loop system with a human controller, we use a passivation method. Through an appropriate design of the passivation parameters, positive passivity indices can be guaranteed for the closed loop system. The passivation parameters can be selected by solving an optimization problem such as minimizing the tracking error. To validate our theory, we provide simulation results in CarSim and Simulink.
- 1 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 722-727
On guaranteeing passivity and performance with a human controller
While designing controllers that guarantee the passivity of a closed loop system has a long history, much less attention has been paid to the situation when the control actions are performed by a human. We consider as an example a human who is driving a car. The behavior of human controllers as drivers has been modeled in the literature as a linear time invariant system cascaded with a time delay. We show that such a human model is not passive. In order to guarantee passivity of a closed loop system with a human controller, we use a passivation method. Through an appropriate design of the passivation parameters, positive passivity indices can be guaranteed for the closed loop system. The passivation parameters can be selected by solving an optimization problem such as minimizing the tracking error. To validate our theory, we provide simulation results in CarSim and Simulink.